Problem with reverse goods movement

Good Morning.
I faced a problem with "schedule line" for an item in a sales order.
I've an order quantity of about 14.000 pieces.
I've created a partial outbound delivery for 8.000 pieces, but then for a problem, I made a "reverse goods movement" with VL09 for all 8000 pieces.
When I came back into item's schedule line, I see in "Delivery quantity" column that is not considered the reverse goods momevent.
I see that delivery quantity is still 8000.
Can You give me some suggestion??
Regards.

There is no trasfer order in Sales Document Flow.
Sales Order 10600587 / 10               12.12.07           14.000,000 NR      Completed
Delivery 8020600166 / 10                12.12.07           14.000,000 NR      Being rocessed
Picking request 20071212                   12.12.07           14.000,000 NR      Completed
GD goods issue:delvy 5500004772 / 1        12.12.07           14.000,000 NR      complete
RE goods deliv. rev. 5500004773 / 1        12.12.07           14.000,000 NR      complete
Delivery quantity is still 14000.

Similar Messages

SD- Related reverse goods movement

Hi,
When we are doing PGI reversal by VL09, stock is coming back to the location from it was dispatched(LM 25). Can we change the storage location so during revrse goods movement by VL09 stock will come to another storage location(LM23).

Hi Arun
It is not possible to change the storage location when you are doing the reverse goods movement in VL09
--You have done the PGI in Vl01N i.e Goods as already dispatched from this storage location.(LM25) so you cannot change the storage location as ( LM23 ) in VL09
--Once you the reverse in VL09 the goods goes back to this Storage location where it as been dispatched (LM25).
--If you want goods to be dispatched from Storage location (LM23) you have to change Storage location Vl02N before doing the PGI.
--Make sure you need to assign this storage location to your plant & maintain same Material stock in this storage (LM23).
Let me know if your problem is solved
Regards
Pradeep

Problem with reversal of Service entry Sheet

Hi All,
I am facing a problem with reversal of service entry sheet. The user has posted the document in dec 2009 and now the user wants to reverse the doc. I told the process how to reverse it. But when she is trying to revoke the acceptance, she is getting error log.I told her to reset the posting date to present date.Now she tried to change the doc date but she is getting error as "604 item 010 WBS element ****** budget exceeded year 2009". So i advised her further to increase the budget in the year 2009. Even that solution is not working.
Please help in this regard
Thanks & Regards
Nisha Prasad

Hi,
The user is not authorised to change the budget. The person resposible for this is telling that increasing the budget wont help. can you tell me how to view whether the budget is available for the system in the period or not? Can you please help me in this regard?
Thanks
Nisha

Problem with reverse mapping

Hi!
I am having a problem with reverse mapping. Here's what I do (copying the
generated files to a correct directory omitted):
% rd-schemagen -properties jdo.properties -file schema.xml
% rd-reversemappingtool -properties jdo.properties -package testi
schema.xml
% javac -d build/classes src/testi/*.java
% rd-importtool -properties jdo.properties src/testi/testi.mapping
Here's a part of the output:
<clip>
2958 INFO [main] jdbc.Schema - Found existing table "Kirja" for schema
"null".
3002 INFO [main] jdbc.Schema - Found existing table "Kustantaja" for
schema "n
ull".
3047 INFO [main] jdbc.SQL - [C: 5948361; T: 15336018]close
3125 INFO [main] jdbc.SQL - [C: 2478770; T: 15336018]open:
jdbc:mysql://localh
ost/kirjakauppa (root)
3129 INFO [main] jdbc.Schema - Found existing table "Kirjailija" for
schema "n
ull".
3140 INFO [main] jdbc.SQL - [C: 2478770; T: 15336018]close
3187 INFO [main] jdbc.SQL - [C: 7529545; T: 15336018]open:
jdbc:mysql://localh
ost/kirjakauppa (root)
3193 INFO [main] jdbc.Schema - Found existing table "Kirjoittaja" for
schema "
null".
3225 INFO [main] jdbc.SQL - [C: 7529545; T: 15336018]close
Exception in thread "main" javax.jdo.JDOFatalInternalException:
java.lang.Illega
lArgumentException: You are attempting to link to a primary key column in
table "Kirja" in a foreign key that is already linked to primary key
columns in table "Kirjailija".
NestedThrowables:
java.lang.IllegalArgumentException: You are attempting to link to a primary
key column in table "Kirja" in a foreign key that is already linked to
primary key c
olumns in table "Kirjailija".
at
com.solarmetric.rd.kodo.impl.jdbc.meta.Mappings.createClassMapping(Ma
ppings.java:160)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMapping(M
appingRepository.java:279)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMetaData(
MappingRepository.java:147)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMapping(M
appingRepository.java:158)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.getMapping(I
mportTool.java:126)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.importMappin
gs(ImportTool.java:57)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.run(ImportTo
ol.java:408)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.main(ImportT
ool.java:385)
NestedThrowablesStackTrace:
java.lang.IllegalArgumentException: You are attempting to link to a primary
key column in table "Kirja" in a foreign key that is already linked to
primary key c
olumns in table "Kirjailija".
at
com.solarmetric.rd.kodo.impl.jdbc.schema.ForeignKey.join(ForeignKey.j
ava:238)
at
com.solarmetric.rd.kodo.impl.jdbc.schema.SchemaGenerator.generateFore
ignKeys(SchemaGenerator.java:625)
at
com.solarmetric.rd.kodo.impl.jdbc.schema.DynamicSchemaFactory.findTab
le(DynamicSchemaFactory.java:111)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.map.BaseClassMapping.fromMappi
ngInfo(BaseClassMapping.java:113)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.Mappings.createClassMapping(Ma
ppings.java:144)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMapping(M
appingRepository.java:279)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMetaData(
MappingRepository.java:147)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMapping(M
appingRepository.java:158)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.getMapping(I
mportTool.java:126)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.importMappin
gs(ImportTool.java:57)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.run(ImportTo
ol.java:408)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.main(ImportT
ool.java:385)
</clip>
Here's what MySQLCC gives for creation statement of the tables:
<clip>
# Host: localhost
# Database: kirjakauppa
# Table: 'Asiakas'
# CREATE TABLE `Asiakas` (
`Asiakas_id` int(11) NOT NULL auto_increment,
`Nimi1` varchar(50) default NULL,
`Nimi2` varchar(50) default NULL,
`KatuOsoite` varchar(50) default NULL,
`Postiosoite` varchar(50) default NULL,
`Email` varchar(50) default NULL,
`Puhelin` varchar(50) default NULL,
`Fax` varchar(50) default NULL,
`Salasana` varchar(50) default NULL,
`ExtranetTunnus` varchar(50) default NULL,
PRIMARY KEY (`Asiakas_id`),
KEY `Asiakas_id` (`Asiakas_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Kirja'
# CREATE TABLE `Kirja` (
`Kirja_id` int(11) NOT NULL auto_increment,
`Kustantaja_id` int(11) default NULL,
`Nimi` varchar(60) default NULL,
`Nimi2` varchar(60) default NULL,
`ISBN` varchar(50) default NULL,
`Kieli` varchar(50) default NULL,
`Kansi_URL` varchar(50) default NULL,
`Sisalto_URL` varchar(50) default NULL,
`Tukkuhinta` decimal(10,2) default NULL,
`Kuluttajahinta` decimal(10,2) default NULL,
`Varastokpl` int(11) default NULL,
PRIMARY KEY (`Kirja_id`),
KEY `Kirja_id` (`Kirja_id`),
KEY `Kustantaja_id` (`Kustantaja_id`),
FOREIGN KEY (`Kustantaja_id`) REFERENCES `kirjakauppa.Kustantaja`
(`Kustantaja_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Kirjailija'
# CREATE TABLE `Kirjailija` (
`Kirjailija_id` int(11) NOT NULL auto_increment,
`Sukunimi` varchar(50) default NULL,
`Etunimi` varchar(50) default NULL,
`Maa` varchar(50) default NULL,
`Kirjailija_URL` varchar(50) default NULL,
PRIMARY KEY (`Kirjailija_id`),
KEY `Kirjailija_id` (`Kirjailija_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Kirjoittaja'
# CREATE TABLE `Kirjoittaja` (
`Kirjoittaja_id` int(11) NOT NULL auto_increment,
`Kirjailija_id` int(11) NOT NULL default '0',
`Kirja_id` int(11) NOT NULL default '0',
PRIMARY KEY (`Kirjoittaja_id`),
KEY `Kirjailija_id` (`Kirjailija_id`),
KEY `Kirja_id` (`Kirja_id`),
FOREIGN KEY (`Kirjailija_id`) REFERENCES `kirjakauppa.Kirjailija`
(`Kirjailija_id`),
FOREIGN KEY (`Kirja_id`) REFERENCES `kirjakauppa.Kirja` (`Kirja_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Koodi'
# CREATE TABLE `Koodi` (
`Koodi_id` int(11) NOT NULL auto_increment,
`Koodi` varchar(50) default NULL,
`Tyyppi` varchar(50) default NULL,
`Arvo` varchar(50) default NULL,
PRIMARY KEY (`Koodi_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Kustantaja'
# CREATE TABLE `Kustantaja` (
`Kustantaja_id` int(11) NOT NULL auto_increment,
`Nimi` varchar(80) default NULL,
`Maa` varchar(50) default NULL,
`Kustantaja_URL` varchar(50) default NULL,
`KirjaLkm` int(11) default NULL,
PRIMARY KEY (`Kustantaja_id`),
KEY `Kustantaja_id` (`Kustantaja_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Luokittelu'
# CREATE TABLE `Luokittelu` (
`Luokittelu_id` int(11) NOT NULL auto_increment,
`Luokka_id` int(11) NOT NULL default '0',
`Kirja_id` int(11) NOT NULL default '0',
PRIMARY KEY (`Luokittelu_id`),
KEY `Luokka_id` (`Luokka_id`),
KEY `Kirja_id` (`Kirja_id`),
FOREIGN KEY (`Luokka_id`) REFERENCES `kirjakauppa.Luokka` (`Luokka_id`),
FOREIGN KEY (`Kirja_id`) REFERENCES `kirjakauppa.Kirja` (`Kirja_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Luokka'
# CREATE TABLE `Luokka` (
`Luokka_id` int(11) NOT NULL auto_increment,
`Luokka` varchar(50) default NULL,
PRIMARY KEY (`Luokka_id`),
KEY `Luokka_id` (`Luokka_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Myyja'
# CREATE TABLE `Myyja` (
`Myyja_id` int(11) NOT NULL auto_increment,
`Myyja` varchar(50) default NULL,
`Myyja_URL` varchar(50) default NULL,
PRIMARY KEY (`Myyja_id`),
KEY `Myyja_id` (`Myyja_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Tilaus'
# CREATE TABLE `Tilaus` (
`Tilaus_id` int(11) NOT NULL auto_increment,
`Asiakas_id` int(11) NOT NULL default '0',
`Myyja_id` int(11) default NULL,
`TilausPvm` timestamp(14) NOT NULL,
`EnsimmToimitusPvm` timestamp(14) NOT NULL,
`ViimToimitusPvm` timestamp(14) NOT NULL,
`Tila` int(11) NOT NULL default '0',
`Mk` decimal(10,2) default NULL,
PRIMARY KEY (`Tilaus_id`),
KEY `Asiakas_id` (`Asiakas_id`),
KEY `Myyja_id` (`Myyja_id`),
KEY `Tilaus_id` (`Tilaus_id`),
FOREIGN KEY (`Asiakas_id`) REFERENCES `kirjakauppa.Asiakas`
(`Asiakas_id`),
FOREIGN KEY (`Myyja_id`) REFERENCES `kirjakauppa.Myyja` (`Myyja_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Tilausrivi'
# CREATE TABLE `Tilausrivi` (
`TilausRivi_id` int(11) NOT NULL auto_increment,
`Tilaus_id` int(11) NOT NULL default '0',
`Kirja_id` int(11) NOT NULL default '0',
`TilausLkm` int(11) default NULL,
`Ahinta` decimal(10,2) default NULL,
`Alepros` float default NULL,
`Mk` decimal(10,2) default NULL,
`ToimitettuLkm` int(11) default NULL,
`ToimitusPvm` timestamp(14) NOT NULL,
`ViimToimitusPvm` timestamp(14) NOT NULL,
`Tila` int(11) NOT NULL default '0',
PRIMARY KEY (`TilausRivi_id`),
KEY `Tilaus_id` (`Tilaus_id`),
KEY `Kirja_id` (`Kirja_id`),
FOREIGN KEY (`Tilaus_id`) REFERENCES `kirjakauppa.Tilaus` (`Tilaus_id`),
FOREIGN KEY (`Kirja_id`) REFERENCES `kirjakauppa.Kirja` (`Kirja_id`)
) TYPE=InnoDB;
</clip>
I can find the original creation script if it is necessary.
My guess was that I need to define the foreign keys myself into the
generated schema.xml This is stated in the manual. However, this did not
help, although it changed the stack trace a little (it complains about
different classes than before):
<clip>
Exception in thread "main" javax.jdo.JDOFatalInternalException:
java.lang.IllegalArgumentException: You are attempting to link to a primary
key column in table "Myyja" in a foreign key that is already linked to
primary key columns in table "Asiakas".
NestedThrowables:
java.lang.IllegalArgumentException: You are attempting to link to a primary
key column in table "Myyja" in a foreign key that is already linked to
primary key columns in table "Asiakas".
at
com.solarmetric.rd.kodo.impl.jdbc.meta.Mappings.createFieldMapping(Mappings.java:208)
</clip>
I don't think I fully understand the error message, what exactly is wrong
here? How can I fix it?
Here's a sample of the changes I made to schema.xml:
- added the name - attribute to schema (it was missing)
<schema name="kirjakauppa">
- added the foreign key elements according to the table creation statements
given above
<fk name="Kustantaja_id" to-table="Kustantaja" column="Kustantaja_id"/>
etc...
-Antti

On Mon, 16 Jun 2003 17:55:35 -0500, Abe White <[email protected]>
wrote:
It seems the last three options are being ignored - I still get a
mapping
file with schema names in front of tables (e.g. kirjakauppa.Asiakas, not
Asiakas),That, unfortunately, is impossible to turn off. The -useSchemaName
option controls whether the schema name is included as part of the
generated class name; it doesn't affect the mapping data that is
generated. What problems does including the schema name in the mapping
data cause?
rd-importtool -properties jdo.properties gensrc/testi/testi.mapping0 INFO [main] kodo.MetaData - Parsing metadata resource
"file:/home/akaranta/work/kurssit/jdo/Harjoituskoodi/kirjakauppa/gensrc/testi/testi.mapping".
Exception in thread "main"
com.solarmetric.rd.kodo.meta.JDOMetaDataNotFoundException: No JDO metadata
was found for type "class testi.Asiakas".
FailedObject:class testi.Asiakas
at
com.solarmetric.rd.kodo.meta.JDOMetaDataRepositoryImpl.getMetaData(JDOMetaDataRepositoryImpl.java:126)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMetaData(MappingRepository.java:184)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMapping(MappingRepository.java:197)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.getMapping(ImportTool.java:128)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.importMappings(ImportTool.java:60)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.run(ImportTool.java:400)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.main(ImportTool.java:377)
This exception goes away if I edit the schema name out of the mapping
file from all classes.
separate classes are being generated for join tables with
primary keysDo these join tables have an extra primary key column? TheYes, they do. Ok, now I know where the problem is.
-primaryKeyOnJoin flag tells Kodo to ignore a join table with a primary
key on the join columns. But Kodo can't handle join tables with extra
column(s) just for a primary key identifier. This isn't a limitation of
the reverse mapping tool, it's a limitation of Kodo. Kodo wouldn't know
what to insert in those extra primary key column(s) when adding membersWhy not? If it can handle single numeric pk columns when making the
generated classes use data store identity, it has to generate something to
those columns. I can't see why this is different.
That is simply out of curiosity - the next thing fixed my problem:
to the join table. Of course, if the primary key is an auto-increment or
something where Kodo can ignore it for inserts, you can just remove the
<column> elements and the <pk> element from your .schema file and the
reverse mapping tool will map it as a join table appropriately.It is auto-increment, so I did this and it worked. Thanks.
, and application id is used for all classes.Are your primary keys on single, numeric columns? Kodo uses Java longsYes (int in MySQL), so that should not be a problem. They are also auto-
incremented. This seems to be the only real problem remaining with this
schema.
-Antti

HT204382 Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no d

Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no diference

Download and install the free VLC for Mac - that should work:
http://www.videolan.org/vlc/download-macosx.html

Problem with post goods issue

hi
I'm doing a delivery using vl01n bt at post goods issue its showing run time error.the error message details gvn below.
Information on where terminated
Termination occurred in the ABAP program "SAPLMBWL" - in
"MB_POST_GOODS_MOVEMENT".
The main program was "SAPMV50A ".
In the source code you have the termination point in line 59
of the (Include) program "LMBWLU21".
Source Code Extract
Line SourceCde
29 * when a goods movement for an inbound or outbound delivery is posted
30 * directly from VL31N/ VL01N, XBLNR is not yet known when we call
31 * CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
32 * BKPF as well. There is no other way to forward XBLNR to FI as not
33 * every document is posted by MB_CREATE -> a new function module in
34 * MBWL for transferring the information, called by FI, meant to load
35 * the complete function group for all MBxx postings when this isn't
36 * required (Performance). Would be the better way to transport the
37 * information after switching off MBxx in later release.
38 * corresponding IMPORT ... FROM MEMORY ... can be found in
39 * AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40 l_mem_id = 'MKPF-XBLNR'. " 641365
41 EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id. " 641365
42 ENDIF.
43 IF xmkpf-xabln IS INITIAL. "note 434093
44 CALL FUNCTION 'MB_XAB_NUMBER_GET'. "note 434093
45 ENDIF. "note 434093
46
47 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50 CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51 EXCEPTIONS
52 error_message = 4.
53 * As soon as we have started to put things into UPDATE TASK, we must
54 * ensure that errors definitely terminate the transaction.
55 * MESSAGE A is not sufficient because it can be catched from
56 * external callers which COMMIT WORK afterwards, resulting in
57 * incomplete updates. Read note 385830 for the full story.
58 IF NOT sy-subrc IS INITIAL.
>>>>> MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
60 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61 * MESSAGE A263.
62 ENDIF.
plz tell me the configuration steps for post goods issue in SD if applicable.

Hi Lakshmipati,
I have maintained movement type 601 at OMJJ. I hav also added the filed cost center in that (before it was not available).
I checked GL acct at fs00, it is already contain field status group g004 and the check box "post automaticallyt" is also activated. The cost element has also assigned to cost center. After assigning the cost center to cost element, the error is changed to fld selection for mvmt type 601/ acct 300021 differs for cost center
But i noticed one thing: If i chage the field status group to g006, the error has not appeared and giving the other error:
valuation area xxx2 (plant) not yet ptoductive with material ledger this error has been already posted by me but not yet received correct answer.
Kindly provide the solution for this.
Regads
Sabera

Problem with post goods issue in SD std. delivery

hi
while doing post goods issue of a delivery in VL01n its showing run time error. the error message is gvn below.
Information on where terminated
Termination occurred in the ABAP program "SAPLMBWL" - in
"MB_POST_GOODS_MOVEMENT".
The main program was "SAPMV50A ".
In the source code you have the termination point in line 59
of the (Include) program "LMBWLU21".
Source Code Extract
Line SourceCde
29 * when a goods movement for an inbound or outbound delivery is posted
30 * directly from VL31N/ VL01N, XBLNR is not yet known when we call
31 * CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
32 * BKPF as well. There is no other way to forward XBLNR to FI as not
33 * every document is posted by MB_CREATE -> a new function module in
34 * MBWL for transferring the information, called by FI, meant to load
35 * the complete function group for all MBxx postings when this isn't
36 * required (Performance). Would be the better way to transport the
37 * information after switching off MBxx in later release.
38 * corresponding IMPORT ... FROM MEMORY ... can be found in
39 * AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40 l_mem_id = 'MKPF-XBLNR'. " 641365
41 EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id. " 641365
42 ENDIF.
43 IF xmkpf-xabln IS INITIAL. "note 434093
44 CALL FUNCTION 'MB_XAB_NUMBER_GET'. "note 434093
45 ENDIF. "note 434093
46
47 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50 CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51 EXCEPTIONS
52 error_message = 4.
53 * As soon as we have started to put things into UPDATE TASK, we must
54 * ensure that errors definitely terminate the transaction.
55 * MESSAGE A is not sufficient because it can be catched from
56 * external callers which COMMIT WORK afterwards, resulting in
57 * incomplete updates. Read note 385830 for the full story.
58 IF NOT sy-subrc IS INITIAL.
>>>>> MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
60 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61 * MESSAGE A263.
62 ENDIF.
if there is any configuration step for post goods issue in SD thn plz mention it.
Plz help..

Hi Lakshmipati,
I have maintained movement type 601 at OMJJ. I hav also added the filed cost center in that (before it was not available).
I checked GL acct at fs00, it is already contain field status group g004 and the check box "post automaticallyt" is also activated. The cost element has also assigned to cost center. After assigning the cost center to cost element, the error is changed to fld selection for mvmt type 601/ acct 300021 differs for cost center
But i noticed one thing: If i chage the field status group to g006, the error has not appeared and giving the other error:
valuation area xxx2 (plant) not yet ptoductive with material ledger this error has been already posted by me but not yet received correct answer.
Kindly provide the solution for this.
Regads
Sabera

Problem with a DVD movie

Hey,
I have a DVD movie that when I enter it to my iMac it doesn't mount, makes the regular fan/processor noise continuously, then after a couple of minutes the finder gets stuck and I can't eject it. I never experienced this with any other dvd.
And the movie is "Naqoyqatsi" (If someone else experienced this problem with it)
Thanks

Well, I have discovered from doing a lot of burning that if you don't run 3 programs to eliminate the cache files and the build up of files that your computer stores, this seems to cause DVD Movies not to mount normal.
If I run,
Macjanitor.
http://personalpages.tds.net/~brian_hill/downloads.html
Cache Out X.
http://www.versiontracker.com/dyn/moreinfo/macosx/14850
Onyx.
http://www.versiontracker.com/dyn/moreinfo/macosx/20070
The one above is for 10.3
http://www.macupdate.com/info.php/id/11582
The one above is for 10.4
Running these 3 work for me.
Remember shutting your computer Off, I mean clear OFF for a time occasionally helps also.
Bear in mind there are several schools of thought on this subject.
I have experimented and the above information has always worked for me.
Hope this helps you all.
Cheers Don

Problem with MIGO goods issue to a Service Order

Hello All
I have checked through out the forum as well as google and can not find the answer to my issue. Please read the below details and advise....
In MIGO; when trying to perform a goods issue to a service order (created in IW31) I get an error message the document does not contain any selectable items. I can not get passed this. When I use the transaction MB11, it works just fine. I went to the allowed transactions in OMJJ to ensure MIGO was listed as an allowed transaction... and MIGO is listed so I know that is not my issue. It is not related to the service order not being released as it is and plus if it was not released it would not work in MB11. I need this to work for the transaction MIGO....Please someone guide me in the proper direction of what is missing.

Hi Kimberly,
When you post the goods issue as an unplanned goods movement against the order, the reservation is not even read, so it is never updated.
The data that you enter manually in this unplanned goods issue does not even need to match with the data in the reservation: the material, the plant... evrything can be different. The order is just a CO Account Assignment in this case and the reservation is not processed in any moment. This way, it is not possible to close the reservation when posting this kind of unplanned goods issue, as the reservation is not even considered (and, therefore, never updated).
It is only when you post the planned goods issue referencing the order directly when you really post your goods issue with reference to the reservation behind the order. Only in this case is when the data in the posting is checked against the reservation (the material, the plant, etc cannot be changed because they are taken directly from the reservation). Also, it is only in this case when the quantity in the posting is checked against the quantity in the reservation. If we issue the total reserved quantity, the reservation is closed automatically.
In the first case for the unplanned goods issue there is never an automatic update of the reservation because the posting does not even consider the reservation. It is only when you post the goods movement with reference to the order (in MB1A using "To Order..." and in MIGO "Goods Issue + Order") when the reservation is taken into account in the goods movement and, therefore, updated.
You can also refer to the SAP Library:
[http://help.sap.com/saphelp_erp2005/helpdata/en/a5/6337db43a211d189410000e829fbbd/frameset.htm]
It says:
"This withdrawal is unplanned because there is no reservation to be referenced."
An unplanned goods issue with the movement 261 and the order (working as CO account assignment object) is more or less the same as a 201 for a cost center. The cost center and the order are just CO Objects in this scenario.
I hope this helps you further!
Best regards,
Esther.

PGI with WS_DELIVERY_UPDATE- Goods Movement doc status set to 'Archived'

Hi experts,
I have a report in which I am trying to do PGI for an outbound delivery. The PGI is successful but the Goods movement document created by PGI is being archived immediately. It should not be archived. Is there any parameter that I need to change or use a different FM for PGI?
The code looks like this
carry out goods issue
LOOP AT it_likp INTO likp_wa.
        CLEAR lv_error.
        l_vbkok-vbeln_vl = likp_wa-vbeln.
        l_vbkok-wabuc = 'X'. u201Cvariable to set Post good issue automatically
        CLEAR lv_pgi.
        CALL FUNCTION 'WS_DELIVERY_UPDATE'
          EXPORTING
            vbkok_wa                  = l_vbkok
            synchron                  = 'X'
            no_messages_update        = ' '
            update_picking            = 'X'
            commit                    = ' '
            delivery                  = likp_wa-vbeln
            nicht_sperren             = 'X'
          IMPORTING
            ef_error_in_goods_issue_0 = lv_pgi
          TABLES
            prot                      = l_prott
          EXCEPTIONS
            OTHERS                    = 0.
        IF sy-subrc <> 0 OR lv_pgi EQ 'X'.
          lv_error = 'X'.
        ENDIF.
ENDLOOP.
Thanks for your help in advance.
Nalini.

Flow
The sequence of flow will be as follow:-
(1). Delivery document number is
entered in ‘VF01’ and Enter is pressed.
(2). Post Goods Issue is done in
the background if the delivery document number exists.
(3).After Doing PGI the billing
process is continued.
Design
Step1 Created
a project in CMOD named ZV60A001.
Step2 Create
a Customer exit component EXIT_SAPLV60A_002 in project ZV60A001.
Step3 In Exit there is a custom exit which is not
created, Press Enter and create include “”.
Step4 The
Function Module “CSO_P_DLVRY_GOODS_ISSUE_CREATE” is used.
Step5 The Function Module is passed with the parameters:-
EXPORTING
Pi_deliv_numb which
IMPORTING
Pe_return1 which is Return Parameter(s), is
a structure which returns error description, if any.
Pe_gi_blocked which is checkbox field, for telling if the PGI is blocked.
Hope this helps...

A really annoying problem with a button/movie clip

I am having a problem with a button! its driving me insane
because i managed to do it last week, but that was by chance and
now i can't remember how i did it!
I can get the button (i'm using gelright from the common
libraries panel) and convert it to a movie clip(by pressing F8) and
even attach a behaviour but when i play the movie it doen't work!
when i move the curser over the button it changes into a hand, but
will not act like a button, even though i have set the behaviour to
'on release, go to and play keyframe 2'.
Please help me, for the sake of my laptop goin through the
wall!

virgosam20 wrote:
> first, i found the button i wanted in the common
libraries (gelright) and
> added it to the stage. I resized it and converted it
into a symbol as a movie
> clip. Then it got added to my library.
> Then i deleted it from the stage and replaced it with
the movie cip version i
> had just converted it to. so now i have the same object
on the stage, but now
> its a movie clip and not a button.
ok - you are running yourself around in circles - why did you
delete it to the stage only to add it
again? once you converted it to a movie clip, you had what
you wanted on the stage - but then you
deleted it and dragged another instance of the same symbol
back onto the stage - there's no reason
to do that.
> Then i double clicked on it to bring up the movie clip
timeline, but instead
> of saying 'top, down, over, hit' (or whatever it says),
it jsut said 'layer 1'
> (but this was not my original stage as i have a number
of layers on that one).
Right - this is expected because yoyu are now inside the
movie clip timeline - not the button timeline.
> When i double clicked on it again, it brought up the
right headings (top, down,
> over, etc),
Right - because by double clicking the button symbol you were
then brought to "edit mode" for the
button symbol.
but there were about 5 layers that showed the different
layers for
> the original button.
Huh? What "5 layers"? What do you mean "original" button -
per your description there has only ever
been 1 button you have been working with.
> I think i have to add the button to each of the
headings, bt there is no room,
Lost you completely now - what do you mean add the button to
each heading? I have no clue what you mean.
> as when i did it before, there was only one layer for it
and i had to insert
> the key frames myself.
Still losing you here.
> I then added a behaviour to it using the Behaviours
pannel, (selected
> movieclip, then 'go to and play....') and it appears in
the behaviours pannel.
> But when i got to Play Movie, although the curser
changes into a hand, the
> button does not work.
That's because you are applying a behavior for a button to a
movie clip instead.
I think you went wrong when you converted the button to a
movie clip - i have no idea why you did
that or why to think your button needs to be in a movie clip.
>
> Hope that can help you with what i've done and you can
tell me where i've gone
> wrong.
>
I just think you don't understand how timelines, symbols or
buttons work yet in flash.
1. drag a button to the stage.
2. select it and open the Behaviors panel (dont double click
it to edit it).
3. add your actions.
4. test movie.
(no need for a movie clip here.
-chris

Bizarre problem with garbage on movie export

I am having a weird problem with exporting video from an iMovie '08 project.
You can see the video here: http://www.youtube.com/watch?v=McFnmpuSKGc
About 31 seconds in, the first problematic clip shows up. Do you see how the video from some clips gets shrunk to the lower right corner and the rest of the space is filled with garbage, while other clips display in the full window? This happens no matter which size or type I export/share to. The weird thing is, if I play the (non-exported) project within iMovie, even at full screen, it looks fine.
Knowing nothing about video, my first thought was, "maybe the videos are different sizes, and the ones with garbage around them were at a lower resolution than the videos without garbage around them. However, all of the original videos are from the same camera, and all are at 960x540 resolution, H.264 encoding, and the same bit rate - I checked each file by using Cmd-I in the Finder.
Do any iMovie experts have suggestions on how to fix this? Again, it looks fine when I play the project in iMovie, but it has this problem whenever I export or share it to another format.
Thanks!

Correct me if I'm wrong. What this lines does (if there isn't a space between the two single-quotes) is removing the string represented by xmlnsVal from the string xmlDoc. I've been using this method in some situations.
But I don't know why it won't work either. However, isn't it necessary to do conversion from CLOB to varchar2 before calling replace? Maybe the implicit conversion isn't so reliable. I've seen someone did the following:
-- clobvar is CLOB
-- stringvar is varchar2(4000)
stringvar := cast(clobvar as varchar2(4000)); -- not testedAfter that you can use stringvar in your replace function.
Or alternately, if exists in 9i, you can try the function regexp_replace() instead. Good luck.

Problems with a QuickTime movie file. Error 2048 message

I am having problems with a QuickTime file.
The file is on a TDK 4GB pen drive.
I can access the file without problem directly from the pen drive.
I am using a Sony VAIO Laptop running Windows 7.
QuickTime version 7.71.80.42.
When I transfer the file to a folder or upload to send via e-mail on Hotmail and then try to open it I receive an Error 2048 message - "Couldn't open the file.......because it is not a file that QuickTime understands.
Any help would be appreciated.

You should be fine: a standard DVD can contain up to 120 minutes of video, but this includes menus etc.
iDVD is not concerned with file sizes, just length. It will automatically compress the iMovie file to the standard DVD format of mpeg2 - which is 4.7GB for 120 minutes!
I have once made a family DVD 115 minutes long, but after the family either protested or fell asleep, I have tried to keep them under 75 minutes!

Problem with loading new movie.

Hallo!
I like to play external preloader before it's load original movie index.swf.
But I have a problem on resizing index movie.
Sample files on link http://www.uusrand.eu/galerii/proov/Sample.zip
Thanks
Here is preload AS3 code:
package
    import flash.display.*
    import flash.display.MovieClip;
    import flash.net.URLLoader;
    import flash.net.URLRequest;
    import flash.net.navigateToURL;
    import flash.net.URLVariables;
    import flash.events.*;
    import flash.events.Event;
    import flash.events.MouseEvent;
    import flash.display.StageScaleMode;
    import flash.display.StageAlign;
    import flash.display.Sprite;
    public class Preload extends MovieClip
        private var LOADED_CONTENT:Loader = new Loader();
        public function Preload()
            LOADED_CONTENT.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, INDEX_LOADING);
            LOADED_CONTENT.contentLoaderInfo.addEventListener(Event.COMPLETE, INDEX_LOAD_COMPLETE);
            LOADED_CONTENT.load(new URLRequest("index.swf"));
        private function INDEX_LOADING(e:ProgressEvent):void
            mc1.text = int(e.bytesLoaded / e.bytesTotal * 100) + "%";
        private function INDEX_LOAD_COMPLETE(e:Event):void
            LOADED_CONTENT.contentLoaderInfo.removeEventListener(ProgressEvent.PROGRESS, INDEX_LOADING);
            LOADED_CONTENT.contentLoaderInfo.removeEventListener(Event.COMPLETE, INDEX_LOAD_COMPLETE);
            removeChildAt(0);
            addChild(LOADED_CONTENT);
And here is index AS3 code:
package
    import flash.display.*
    import flash.display.MovieClip;
    import flash.net.URLLoader;
    import flash.net.URLRequest;
    import flash.net.navigateToURL;
    import flash.net.URLVariables;
    import flash.events.*;
    import flash.events.Event;
    import flash.events.MouseEvent;
    import fl.motion.easing.*;
    import flash.display.StageScaleMode;
    import flash.display.StageAlign;
    import flash.display.Sprite;
    public class Index extends MovieClip
        public static var SCREEN_SIZE_W:Number;
        public static var SCREEN_SIZE_H:Number;
        public function Index()
            stage.scaleMode = StageScaleMode.NO_SCALE;
            stage.align = StageAlign.TOP_LEFT;
            STAGE_RESIZE(null);
            stage.addEventListener(Event.RESIZE, STAGE_RESIZE);
            stage.dispatchEvent(new Event(Event.RESIZE));
        private function STAGE_RESIZE(e:Event):void
            if (stage.stageWidth < 500)
                SCREEN_SIZE_W = 500;
            else
                SCREEN_SIZE_W = stage.stageWidth;
            if (stage.stageHeight < 400)
                SCREEN_SIZE_H = 400;
            else
                SCREEN_SIZE_H = stage.stageHeight;
            mc2.width = SCREEN_SIZE_W - 100;
            mc2.height = SCREEN_SIZE_H - 100;
            mc2.x = SCREEN_SIZE_W / 2;
            mc2.y = SCREEN_SIZE_H;

Thanks. I don't know is this correct sollution, but this works.
Here is my change:
package
    import flash.display.*
    import flash.display.MovieClip;
    import flash.net.URLLoader;
    import flash.net.URLRequest;
    import flash.net.navigateToURL;
    import flash.net.URLVariables;
    import flash.events.*;
    import flash.events.Event;
    import flash.events.MouseEvent;
    import fl.motion.easing.*;
    import flash.display.StageScaleMode;
    import flash.display.StageAlign;
    import flash.display.Sprite;
    public class Index extends MovieClip
        public static var SCREEN_SIZE_W:Number;
        public static var SCREEN_SIZE_H:Number;
        public function Index()
            stop();
            addEventListener(Event.ADDED_TO_STAGE, INDEX_ADDED_TO_STAGE);
        public function INDEX_ADDED_TO_STAGE(e:Event):void
            play();
            INDEX_ON();
            removeEventListener(Event.ADDED_TO_STAGE, INDEX_ADDED_TO_STAGE);
        private function INDEX_ON():void
            stage.scaleMode = StageScaleMode.NO_SCALE;
            stage.align = StageAlign.TOP_LEFT;
            stage.addEventListener(Event.RESIZE, STAGE_RESIZE);
            STAGE_RESIZE(null);
        private function STAGE_RESIZE(e:Event):void
            if (stage.stageWidth < 500)
                SCREEN_SIZE_W = 500;
            else
                SCREEN_SIZE_W = stage.stageWidth;
            if (stage.stageHeight < 400)
                SCREEN_SIZE_H = 400;
            else
                SCREEN_SIZE_H = stage.stageHeight;
            mc2.width = SCREEN_SIZE_W - 100;
            mc2.height = SCREEN_SIZE_H - 100;
            mc2.x = SCREEN_SIZE_W / 2;
            mc2.y = SCREEN_SIZE_H;

REVERSE GOODS MOVEMENT / problem with status EDEL

Hi Gurus,
I made an reversment with VL09 for a delivery document.
Then the equipment get a status EDEL -Assigned in delivery note.
Now i cant move the equipmnet from warehouse.
How can I fix this problem.
Thanks...

problem solved

Problem with reverse goods movement

Similar Messages

Maybe you are looking for