Problem with RFC to XI - using tables

Hi experts,
I have a RFC function module in R/3 which uses table - the table has 2 components PartNumber and ComptiaCode. But when the RFC call is made, in XI, the value of ComptiaCode is always blank. This is despite the table in the FM has been populated correctly with values for PartNumber and ComptiaCode. Pls see below xml from XI.
<?xml

Hi,
This is despite the table in the FM has been populated correctly with values for PartNumber and ComptiaCode
Check in R3 if the value for this field is being populated and sent out to PI. Your debug investigation should start at R3.
Regards,
Neetesh

Similar Messages

Problem with RFC and a Z Table

hi;
i´ve created a Z table as a transparent table.... now in a function module a need to save data in that table, i do the next:
          zfactura-vbeln_vf = i_factura.
          zfactura-posicion = i_posicion.
          zfactura-fecha_em = i_fecha.
          zfactura-hora_em = i_hora.
          zfactura-usuario_em = i_usuario.
          APPEND zfactura.
but i get this message:
The data object "ZFACTURA" has no structure and therefore no component called "VBELN_VF" .
How can i solve this to save data in that table.
Thanks on advance
David Fúnez
Tegucigalpa, Honduras

this is the structure of the table ZFACTURA.
MANDT             MANDT     CLNT     3     0     Mandante
VBELN_VF     VBELN     CHAR     10     0     Número de documento comercial
POSICION        CHAR2     CHAR     2     0     Componente del número de versión
FECHA_EM     BLDAT     DATS     8     0     Fecha de documento en documento
HORA_EM     TIMS      TIMS     6     0     Campo de tipo TIMS
USUARIO_EM     CHAR12     CHAR     12     0     Campo carácter longitud 12
FECHA_EC     BLDAT     DATS     8     0     Fecha de documento en documento
HORA_EC            TIMS            TIMS     6     0     Campo de tipo TIMS
USUARIO_EC     CHAR12     CHAR     12     0     Campo carácter longitud 12
ESTADO            CHAR10     CHAR     10     0     Campo de texto, longitud 10
FECHA_RB     BLDAT     DATS     8     0     Fecha de documento en documento
HORA_RB            TIMS            TIMS     6     0     Campo de tipo TIMS
USUARIO_RB     CHAR12     CHAR     12     0     Campo carácter longitud 12
The area has been declared in the function module:
DATA zfactura.

Problem with background formatting in pivot table

Hello,
I have a problem with background formatting in pivot table. I can't change background (light blue rectangular in upper left corner). Do you have any idea how to do it?
Here is the link to the picture of the pivot table:
http://img163.imageshack.us/img163/110/unledfyq.png
I would be grateful for any help.
Regards,

Hey,
Check this link once, you will need java script to acheive this:
http://everythingoracle.com/obieehdom.htm
scroll down to this topic: Parsing using HTML DOM
Please award points if helpful.
Thanks,
-Amith.

TS3899 With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this pro

With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.

Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad. Pay real close attention to the outgoing server name, and port. You may need to change in on the pad.

Problems with a shared calendar using Outlook 2007 and Exchange 2010

Hello all,
We are having a problem with sharing a calendar using Outlook 2007 and Exchange 2010.
I will start with some background. I have just started my position with this company. I have been working with networks for awhile at the small business level. I have not had much production experience with exchange. There is only myself and my supervisor
who has inherited a midsized network which was built by five previous techs that are no longer with the company. Of course, the previous techs did not leave much documentation, so the original hows and whys for our system setup has been lost.
One of the managers has a calendar she shares with some of our users. I believe this calendar has been in use since sometime in 2006. A mailbox was created to hold this calendar to keep it separate from the managers calendar. I am not sure what version
of exchange they were using at that time, but I assume there was one or two migrations of it getting to its current state on our exchange 2010 server. At some point it was observed that the other workers she was sharing with were not able to access it correctly.
I am not fully sure what the original problem was (possibly some people not being able to see or connect to the calendar), but it was decided to give everyone who needed access to this calendar full access permissions through exchange. Correct me if I
am wrong, but I believe that gave everyone connected the ability to do anything with the calendar. Of course the manager was not happy about that. This is where I started working on the problem.
I removed everyone, except the manager who wants to control the calendar, from having "Full Access Permissions". This did have the effect of making some people just able to see the calendar and not make changes. Though there were others that were
able to connect to the calendar who I thought would not be able to. The manager that originally created the calendar did try to manage access to it through the Outlook interface, though it currently does not seem to be fully in effect.
So, to get to the point of what we are trying to do, is there a way to get the original manager back into control of the calendar though Outlook? It would be preferred to be able to keep the history of what they tracked of this calendar, so starting a new
one would be something we would rather avoid. After that, getting all of the users that need to connect to the calendar reconnected with the correct access permissions and making sure they are all synchronized.
I realize this is a big mess, and your help would be greatly appreciated.

Hi Nigel,
How is the impact, just one user or all users, Outlook or OWA?
If just one user, it seems like an issue on the Outlook Client side.
Please trying to re-create new profile to fresh the caches.
Please runing Outlook under safe mode to avoid some AVs, add-ins and firewall.
Found a similar thread for your reference:
Calendar Sharing not available error message
http://social.technet.microsoft.com/Forums/exchange/en-US/d9b33281-d7bb-4608-8025-16fb26643d0d/calendar-sharing-not-available-error-message?forum=exchangesvrclientslegacy
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Both xp and windows 7 have video problems with my VGA connection using TV

both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

Problems with a VBA Userform using Multipage (2) and DTPicker.

Hi
Problems with a VBA Userform using Multipage (2) and DTPicker (4)
On Page1 I've got 2 DTPicker, one for the date and the second for the time.
Same thing on Page 2.
Problem:
Only one set will work, if I close the Userform with" MultiPage"on page2, only that set will work.
Same thing if I close on Page 1 then just the set on Page 1 will work.
As anyone seen this problem and any work around you may think would help.
I'm using Windows 7 , Ms Office Pro. 2003
same problem on Windows Vista , XL2003
Cimjet

There are a number of issues relating to the way that date pickers are handled, but the most important is that their output is text. In order to get the values into Excel, you need to format the Excel columns as Date and Custom (time format) and convert
the output to the worksheet from text to date values.
Date pickers also display a few anomalies on multi-page forms, so you need a belt and braces approach. Personally I would put the code to call the form and enter the values in a standard module (as now in the example) and use a belt and braces approach to
maintaining the format.
I think you will find the example now works.
Revised Example
Graham Mayor - Word MVP
www.gmayor.com

Problem with Progress DB while using to connect using JDBC Adapter

Hi,
I am facing Problem with Progress DB while using to connect using JDBC Adapter. I am getting the following error in auditlog file like,
Error during database connection to the database URL jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db using the JDBC driver "com.progress.sql.jdbc.JdbcProgressDriver" : com.sap.aii.adapter.jdbc.sql.DriverManagerException: Unable to locate a suitable JDBC driver to establish a connection to URL " jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db "
I tried using the following all URLs,
1. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.
2. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.db
3.
jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.
4.
jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db.
Can anyone please help me out in solving this issue.
May be the cause for this is :
1) The Wrong URL format
2) CLASSPATH is not setted properly..
Can you look more into this stuff.
Thanks,
Soorya.

Hi,
To access any database fromm XI, using the JDBC adapter, the corresponding drivers have to be installed on the XI server.
Just check this note 831162.
Also, check this PDF to install Drivers in XI,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10

Problem with Pole zero analysis using multisim

Problem with Pole zero analysis using multisim
When I tried to find input impedance function's pole zero of a parallel LC network using Multisim
pole zero analysis, I get following message
| | doAnalyses: matrix is singular
| |
| |
| | pz simulation(s) aborted "
The circuit as well as log file attached.
How to correctly perform pole zero analysis?
Solved!
Go to Solution.
Attachments:
Parallel LC.JPG ‏8 KB
parallel LC.txt ‏7 KB

dear sir,
thanks for your earlier reply to my question on pole zero analysis
one more problem on pole zero analysis ;
i tried to do pole zero analysis for circuit(shown in attached file where C1=1/6F(167mF) C2=5/18F(278mF) for which
z(s)= (s^2+9)(s^2+1)
s(s^2+4)
for which zeros are at +/-3j ,+/-1j
poles at 0 ,+/-2j as per theory:
But multisim gives different values (shown in attached file)
what is the problem?
please clarify.
thanks & regards
sagar vanarase
Attachments:
1portLC.JPG ‏219 KB

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
I saved a new workspace and it did not help.
No problem before I went to Maverick.

I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)

Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo?

Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo? It use to work but it no longer lets you place a title over the opening photo.

Is your signature still current?(iPhoto '08, OS X Mountain Lion (10.8.4)) I can confirm this for iPhoto '11; Shatter will only show the text slide title between the slides. Ken Burns and Classic theme can still be set to overlay the caption and title directly over the slides.

Problem with Indesign CC 2014 and tables

Problem with Indesign CC 2014 and tables. The text rearranges itself when I delete or add something in a table; the footnotes to the text associated with the overlap even getting unreadable. Just click on the chain symbol in the window and everything is fine. Why?

try circumventing your cc app and see if that helps:
if you follow all 7 steps you can directly download a trial here: Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

I had a problem with slowness so I used "reset". The popup ran forever so I stopped it. Now I can't remove or add the program.

I had a problem with slowness so I used "reset". The popup ran forever so I stopped it. Now I can't use, remove, or add the program. How do I proceed?
TIA,
BWSwede

You can paste that path in the command line in the Windows Explorer file manager.

Problem with field type STRING in table

Hi Experts,
I am new to ABAP. I have created a new transparent table which hold error info. One of the field has to store data of size about 1500 char.
Since CHAR type is not acceptable for this field So I gave STRING type. Now when I try to create a TABLE parameter in a RFC enabled functional module using "LIKE YERROR" Then I get a error:
"YERROR must be a flat structure. You cannot use internal tables, strings, references, or structure as component"
Why is this error? How to resolve it? Is it because I have used a field of type STRING in the table? If this is the problem then what other type can I use?
What are other know problems with using STRING type?
Please help!
Thanks
Gopal

Hi,
Try to declare it as type LCHR , it can hold up to 32000 chars.
Regards
vijay

Problem in WD applications that use table footer area

Hi,
Applications that use table UI with footerVisable = true, have
sometimes performence navigation problems ,
when we use one of the pushbottens the application stuck.
Any ideas ???
Thanks Fanie.

Faniel,
This never was an issue. At least, your post is first one that has such complains.
Please describe your data structure used as table source -- cardinality, existence of child nodes, supply function code/data source (i.e. Adaptive RFC, WS, etc)
Valery Silaev
SaM Solutions
http://www.sam-solutions.net

Problem with RFC to XI - using tables

Similar Messages

Maybe you are looking for