Problem with SD card and Sony Bloggie MHS-CM5

I have just bought a Sony Bloggie model MHS-CM5 and a SanDisk SDHC (number 4) 4gb card. For some reason when I turn it on, it was saying "error formatting sd card" or something very similar. I did some research and saw a problem somewhat similar, tried connecting to my computer, taking the battery out and back in, formatting card from camera options, and now it is saying there is no space on the memory card when it is brand new. I am fairly good with these things and I am stumped. Any help is greatly appreciated!

A SDHC type 4 4GB card should work fine with your bloggie, so try the card in another device and try another card in your bloggie to establish which is having the issue. If you find that the bloggie is having issues with several different cards it may need service. Give Sony support a call and they will be happy to help:
http://esupport.sony.com/US/perl/suppor ... mdl=MHSCM5

Similar Messages

[T410] discrete gfx - Problem with Video Card and Windows Aero -anyone using 4Gb memory modules?

[3/3/2010 Update]
There's a issue of using 4Gb sticks on T410 currently that results in video output artifacts and aero interface problems when using Lenovo supplied drivers v8.16.11.8825. I think I can call it confirmed (Three people including me face this issue).
Possible workaround is to install modified EliteBook 8440p video driver (read along this thread) comes with a BIG drawback of not being able to change brightness level within Windows 7. To sweeten it a little bit - you can set luminance level at POST screen, when computer boots up.
[Original Message]
Encountered strange behavoir of my T410.
I have a T410 with 256Mb of Video Memory and 1440x900 display, a T61 with 128Mb of Video Memory and 1400x1050 dsplay and external monitor HP w2338h with 1920x1080 resolution.
If I connect external monitor to my T410 and launch Visual Studio 2010 Beta 2 - image blinks and comes back with Aero disabled. Looking through event logs reveals the lack of memory. Entry information can be found further.
Now If I do the same with my old Thinkpad T61, connect the same monitor using the same cable - I can open as many Visual Studio 2010 Beta 2 instances I like (tried 5) and nothing blinks and Aero stays enabled.
Actually I find ridiculous, a notebook with more VRAM cannot archive the same performance as notebooks with less.
Does anyone know what path should I pursue to solve this issue?
UPDATE: Simply running multiple instances of Visual Studio 2010 Beta 2 without external monitor causes Aero disabled as well.
Log Name:      Application
Source:        Desktop Window Manager
Date:          2/4/2010 7:32:21 PM
Event ID:      9020
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:
Description:
The Desktop Window Manager has encountered a fatal error (0x8007000e)
Error 2/4/2010 7:32:21 PM Desktop Window Manager 9020 None
Solved!
Go to Solution.

mat3y wrote:
I have the same problem with T410 and aero disabled. I am not using VS and I get this error anyway.
The Desktop Window Manager has encountered a fatal error (0x8007000e).
This must be buggy drivers, on Lenovo download site is just the one and the only initial driver for T410 graphics card.
What software were you actively using when this error occured?
Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

Problem with video cards and posterization effect

Hello everyone,
I have problem with posterization effect in Lightroom 4.4 and 5.
When monitor uses integrated video card (Radeon HD 4300) everything is ok. But when I plug in other video card (tested on GeForce GT630 and Radeon HD 7770) I have posterization effect in shadows in every Lightroom module. When picture is exported to jpg then everything is ok. Here is screenshot with NEF in Lightroom and jpg in IrfanView: https://www.dropbox.com/s/yftnnk6w1guii70/Lightroom_problem.png . Of course with colour images I have the same problem. Anyone have an idea what can I do? I have installed the newest drivers for video cards but it didn't help.

For how and why this could have happened, would you mind sharing your capture and sequence settings?
As far as applying parameters to multiple clips, I think you can make use of the Paste Attributes function in FCP...
Alter one of your problematic clips
Select that clip in the Timeline, then press Command-C (or control-click and choose Copy from the contextual menu)
Select the remainder of your problematic clips
With your clips selected press Option-V (or control-click on one of them and select Paste Attributes from the contextual menu) to bring up the Paste Attributes dialog
Select Basic Motion - under the Video options, on your left-hand side - then click OK
(Basic Motion because, if I understand your solution correctly, you altered the Center property - either in the Motion tab of the Viewer or manually in the Canvas - of your clips. You nudged them all up a bit, right? If you did, then that would fall under the Basic Motion attribute.)
All your selected clips should be nudged up appropriately.
But, again, I'm making a bit of leap since I'm not entirely sure what caused your issue in the first place.

Problems with Gift Card and Credit Card

I've read a lot of post, looked at videos on it and none of these have helped me with my problem. My Itunes won't allow me to remove my credit card and just recently what remained on my gift card balance. In fact I logged out and logged back in and now that money is gone when I still had money on it. The reason I reset my account was one, it was suggested but the original problem was because despite having money on said account it kept going back to the credit card to charge the payment to.
Please help. I've done the whole account and tried to remove the credit card. It won't let me. I've tried resetting which put me in my current situation. And I'd really like to know how to remove a credit card. That would be really helpful too.

On your Mac's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link.
Changing payment info : Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support
If you don't get the 'none' option on the payment details screen : Why can’t I select None when I edit my Apple ID payment information? - Apple Support
For no longer having a balance on your account, check your account's purchase history (which you can do via the Store > View Account menu option) : See your purchase history in the iTunes Store - Apple Support

G4 AGP, problems with Graphic Cards and booting from Install DVD

I bought a G4 AGP (with DVD) on Ebay. It has Mac OS9.2 installed and its working correctly so far. It has an additional GraphicsCard in a PCI Slot, on which the Monitor is connected.
1. The AGP Card doesn't give any output signal... I wondered if this would be the reason that somebody installed the additional Card...
2. The AGP Card doens't show up in the Profiler... is this normal? According to other users this seems to be a common issue...
3. I would like to install X 10.4, but when booting from CD, the process stops after a few seconds... and there is no signal on none of the video cards. I tried to remove one or the other card but no luck...
the firmware is uptodate and the Install DVD is correct aswell, I just bought it from AppleStore...
I don't have any original CDs available, so I cant run a hardware test.
Anybody?
G4 AGP Mac OS 9.2.x

The AGP Card doesn't give any output signal... I wondered if this would be the reason that somebody installed the additional Card...
Probably. I'd take out the bad original card and replace it with the additional card. Then, check and see if that's what caused the problem. Then only other choice is to take it to the Apple store and have them check it out.
I don't have any original CDs available, so I cant run a hardware test.
You can either contact the seller and complain about the missing disks or buy replacement disks for your machine. Give 1-800-MY-APPLE a call. The AHT disk should cost about $20. I don't know what the others would run.

Problem with Xperia P and Sony Bridge for Mac

hi there,
I'm trying to update my Xperia P to ICS and, since I've not received any notification, I'm using Sony Bridge for Mac (my phone is not firmware branded).
So, i plug my phone at the mac, starting Bridge and wait for the download... until my phone turn off itself and Bridge advice me that no phone is connected. How can i solve?
Thanks

Unfortunately it's not possible to get back to Android 2.3 if you have updated to Android 4.0 I'm afraid.
To be able to sort it out and get the phone back to the way it should be - now slow or "laggy" - I'd recommend you to try performing a repair of your phone's software first of all.
Just follow the instruction above given by my colleague Samuel and you'll hopefully easily solve the issue. Fingers crossed!
What do you think about this forum? Let us know by doing this short survey.

HT5622 I can't creat my Apple ID billing address , there is problem with debit card and iTunes gift code . Please give me suggestion

How can create Apple ID billing address

Contact iTunes support:
http://www.apple.com/support/itunes/
No one here can help you.

Sony Bloggie MHS-CM5 need to completely disable SteadyShot

Has anyone discovered a hack to completely disable SteadyShot, the motor? Even when shooting 720p at 60fps where the SteadyShot is suppose to be inactive I find it still on. Unfathomably, using the camera on a tripod actually gives me a shakey picture (not to metion a loud adiable grind sound everytime the SteadyShot kicks in), which makes the camera footage worthless. At this point I am finding it hard to believe this camera ever made it to retail as the SteadyShot completely ruins the picture and adds the kinda noise to the audio one woudl associate with old film cameras. It's really, really bad. If anyone knows how I can kill the SteadyShot completely I'd appreciate it.
Solved!
Go to Solution.

Hi Eliah,
Welcome to Sony Community!
There is an option to turn OFF Steadyshot option under “Shooting menu” of the Camera. The camera shake reduction function works only in [640 × 480 30P] or [1280 × 720 30P] mode.
Information about this option is mentioned on page # 40 of the Handbook:
http://www.docs.sony.com/release/MHSCM5_handbook.pdf
Please mark the solution as accepted if you find the information useful.
Thank you for your post.

Problem with Decklink card during voice over

Hi,
i have PMG5 2.5 GHz with FCS & Blackmagic Decklink extreme card.
all these days i had a great time working on FCP . till i faced a peculiar problem
when i am capturing video from Beta or DV 50 , i am able to select video Only or Audio only , or Video & Audio .
but when iam trying to capture Audio Only option through the the Mic which is connected to the mixer, i am not able to capture audio.
even i have noticed one more strange thing, i have tried Voice Over tool in FCP 5.04 with Decklinik card and i am not able to grab any audio through the Decklink card.
but i can use built in audio for my voiceover.
has anybody come across this kind of problem,
can somebody help me .

Hi Rajendra,
your questions is marked as solved, but I haven't seen your question answered, so I might be wasting time. Anyway.
I bumped into the same problem not long ago. I'm using a Multibridge, but the problem and solution are the same. Here's the reply I got from Kristian Lam over at Blackmagic:
In order to get vo tool in Final Cut Pro HD to work, these are the
steps to follow:
1) Video Input in Blackmagic DeckLink preferences is set to match the audio input type. For example, if you're recording via the XLR connectors of your card, then then 'Inputs' under 'DeckLink Video Connections' must set to analog. It doesn't matter if it's component or composite analog video.
2) In the View menu of Final Cut Pro HD, set External Video to “Off”. When finished with the Voice Over tool, set External Video to “All Frames” to use the broadcast monitor.
3) You must have a stable video signal going into the card when using the vo tool or Final Cut Pro HD will not see the audio. (or use a Blackburst generator)
4) Use the Displays menu to set the DeckLink desktop to the same format as the video source, eg. NTSC 720 x 486.
Well, then select your Decklink Card in the Voiceover Input selection. Even after I had done all that, I couldn't see any audio coming into FCP. The solution to that was to raise the Trim at the top of the mixer. I got a nice signal into the Mackie and voilà also sound into FCP.
Hope this helps,
Colin

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Photoshop Premiere 9 vs 13? Are there any problems with CPU usage and crashing?

I stopped using Premiere, because they the computer would freeze and/or the program. I was curious if there was any issue with people currently using Version 13? I think I loaded it on this computer along with Photoshop Elements 9. After a while I just kept Photoshop Elements.
System Specs:
Windows 7 premium home edition
Processor Intel R Core TM i5-2410M CPU @ 2.30 GHz 2.30 GHz
Installed Memory 6.00GB 826 GB free
64 Bit Operating system

stephanies
If 64 bit, while 9 will be a 32 bit application with the limitations of a 32 bit application on 64 bit system, 13 will be a 64 bit application which translates into more computer resources available to 13.
Elements Organizer 9 will not integrate with Elements Organizer 13 although you can convert the 9 catalog in Elements Organizer 13. And there is a marked difference in the workspace between the two versions. Principles tend to stay the same, but features can be moved, changed, or discontinued.
I would have expected Premiere Elements 9/9.0.1 to have worked in your computer environment. Since it did not, I would strongly suggest that you look at the free 30 days tryout of Premiere Elements 13/13.1 in your computer environment to assure the compatibility of it with your computer environment and project goals.
Lots of causes for program crashes (any version).
a. Conflicts with antivirus program.
b. Problem with video card graphics card
c. Use of a pen and table device instead of mouse
d. Problematic source media and format conflicts
e. Not running program as Administrator
f. Poor installation
g. Failure to install QuickTime along with Premiere Elements on the computer
h. Not meeting System Requirements in some way.
i. Other
https://helpx.adobe.com/premiere-elements/kb/system-requirements-premiere-elements.html
Please review and consider. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

I bought my iphone unlocked from carephone warehouse, I had a problem with the phone and apple swapped it over but they locked it to tmobile!!! what can i do?? I have changed contracts and can not use my phone!

I bought my iphone from carephone warehouse, sim free and with no contract. 5 months down the line I had a problem with the phone and I booked a genius appointment, they swapped my phone and gave me a new phone but they locked my phone to tmobile!!! I now do not use tmobile and I have an iphone which is locked to tmobile!!! I bought an unlocked phone and apple have locked it!!! what can i do?

In response to this, Carphone Warehouse (and Phones4U) sell what is commonly referred to as "sim free" handsets - these are not the same as unlocked. Sim free handsets will automatically lock to the first network sim card that the phone is activated with, and that will be permanently. The only way to unlock the handset would be to go through the network (T-Mobile I understand) and request they unlock it for you. More than likely, there will be a charge as you are no longer a T-Mobile customer.
If you ever want to purchase a new unlocked iPhone, the only place you can buy one is from Apple directly. Any other place will most likely sell sim free handsets.

Photosho cs4 - problem with filter liquify and gallery

Hello averydoby, when i try to open the filters liquify and the gallery filters happens that before you open takes 10 minutes to load and when you open the program takes any action carried out for 2-3 minutes. The problem essentially is that charge too.
I own a compute macbook pro with 512 mb video card and 2 gb of ram, I have also tried to use the filters with images of a few kb but the same thing happens.
Someone knows what could be the problem?
Thanks to all

I asked because I had the same problem with PS CS2 and mac OS 10.2.8 on a 2 x 1Ghz mac.
(adbobe level 3 Support was able to reproduce the error but there was no solution)
I don't have the this Problem neither with PS CS4 nor PS CS2 on a mac pro (early 2008) running mac os 10.5.6 anymore.
I was just curious if I 'd have an idea to solve this problem.

Problem with RSC card on sun fire v490

Hi all,
I have a little problem.
I got few v490 that were already used.
When I connect to the management port of the RSC card I get the prompt of the RSC password, somthing i don't have.
The OS doesn't get loaded and I can't do anything. ( if I had access to the OS I would have reseted the password)
So now, I got left with the only option i thought of.
1. Disconnect the RSC card,
2. This will force the output of the consol to go to the serial port(tty).
3. Jumpstart the machine (beacuse I don't even have the password for the machine)
4. connect the RSC card, and reset the password.
There is someone here that encountered this problem??
Maybe there is a jumper that can reset the RSC password. i don't know... every response will be great!
Thanks!!!

Hi,How to set my link up in solaris 10 ?
I dont know want happend to my machine solaris v440 it suddenly disconnected from n/w and finally i came to know that is a problem with NIC card..i din't find any light's glowing back side of the machine at NIC card.
can any one help me in this pls how can i proceed furture for getting my NIC back?
and i have excuted few commands
#ndd -set /dev/ce instance 0
#ndd -set /dev/ce adv_1000fdx_cap 1
#ndd -set /dev/ce adv_autoneg_cap 0
I have got dladm show-dev is
ce0 link: unknown speed: 1000 Mbps duplex: full
ce1 link: unknown speed: 0 Mbps duplex: unknown
I dont understand that why my link is showing still unknown ...any help..

Problem with SD card and Sony Bloggie MHS-CM5

Similar Messages

Maybe you are looking for