Problem with the cover.
The protective cover of the charger, opens slightly alone and therefore pose a sealing problem. No matter as I close the top of the half-open cache after one to two minutes (Unlike the cache that the sim is closed). My question is if this is handled by the service sony? Thank you.
Hi , I just got mine a week ago. Some problem on the sim card cover. It actually caused by tiny plastic connector of the cover. It was bend so its position is not 90 degree. It shall be vertical I guess. Then I heated a bit with cigarrette, carefully not to burn other parts, then try to put it in vertical position. Mine even not so vertical. Whallla..... it perfectly sealed the phone now. Hope it could help. Good luck...
Similar Messages
-
Problem with the cover page of the fax output...
Hi,
I used SO_DOCUMENT_SEND_API1 to send the sapscript thru fax...
I need to have the subject of the fax with values coming from the internal table...
However, my knowledge is that the subject of the fax is part of the document_data importing parameter of the FM...
Now the subject of output only shows the latest entry from the internal table and not every entry...
Thanks a lot!
Clear x_document_data.
loop at i_document_data into x_document_data
WHERE obj_descr is NOT INITIAL.
endloop.
CLEAR i_objpack-transf_bin.
Pack to main body.
i_objpack-doc_type = c_raw. "'RAW'.
APPEND i_objpack.
Pack to PDF.
i_objpack-transf_bin = c_x.
i_objpack-body_start = 1.
i_objpack-body_num = v_righe_attachment.
i_objpack-doc_type = c_pdf. "'PDF'
i_objpack-obj_name = c_test. "'TEST'
i_objpack-doc_size = v_righe_attachment * 255.
APPEND i_objpack.
CLEAR i_reclist.
*For fax receivers.
v_fax_recipient-rec_fax = v_fax_number.
v_fax_recipient-rec_state = v_country.
ASSIGN v_fax_recipient TO <fs_receiver> CASTING.
i_reclist-receiver = <fs_receiver>.
i_reclist-com_type = c_fax. "'FAX'
i_reclist-rec_type = c_f. "'Fax'
APPEND i_reclist.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = x_document_data
commit_work = c_x
IMPORTING
sent_to_all = v_sent_all
TABLES
packing_list = i_objpack
contents_bin = i_objbin
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.Hi Jotsaroop,
Its standard code. I didn't write any code here.
DATA: current TYPE REF TO if_bol_bo_property_access.
DATA: dref TYPE REF TO data.
value =
'value not bound'."#EC NOTEXT
if iterator is bound.
current = iterator->get_current( ).
else.
current = collection_wrapper->get_current( ).
endif.
TRY.
TRY.
dref = current->get_property( 'SP_PHNO' ). "#EC NOTEXT
CATCH cx_crm_cic_parameter_error.
ENDTRY.
CATCH cx_sy_ref_is_initial cx_sy_move_cast_error
cx_crm_genil_model_error.
RETURN.
ENDTRY.
IF dref IS NOT BOUND.
value = 'CUST/SP_PHNO not bound'."#EC NOTEXT
RETURN.
ENDIF.
TRY.
value = if_bsp_model_util~convert_to_string( data_ref = dref
attribute_path = attribute_path ).
CATCH cx_bsp_conv_illegal_ref.
FIELD-SYMBOLS: <l_data> type DATA.
assign dref->* to <l_data>.
* please implement here some BO specific handler coding
* conversion of currency/quantity field failed caused by missing
* unit relation
* Coding sample:
* provide currency, decimals, and reference type
* value = cl_bsp_utility=>make_string(
* value = <l_data>
* reference_value = c_currency
* num_decimals = decimals
* reference_type = reference_type
value = '-CURR/QUANT REF DATA MISSING-'.
CATCH cx_root.
value = '-CONVERSION FAILED-'. "#EC NOTEXT
ENDTRY. -
Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!
I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.
-
What's the best cover for the new iPad (3rd generation). I've been told by a store employee (university bookstore) that there are problems with the magnetic covers on the newest iPad. Suggestions?
The best cover is the one that suites your needs. Try Google. There are dozens on the market.
As for the Apple Smart Cover, it does work with the new iPad. There are a few reported issues with it, but that doesn't come close to representing the totality of folks with it. -
Problems with the Fios 20/5 connection speed in my area dropping down to less than 3mbs.
I have written out a flyer that I plan to go door to door with. Since I am under contract with Verizon, I am forced to honor my side of the contract. Even if they are allowed to make me pay for a service that I am not completely getting. I am very displeased and as soon as my contract is up, I will change back to My local cable companies all in one that does not require a contract and has no issue such as the one I am having.
Do you have Verizon Fios Internet?
Are you on the 20/5 connection?
If so, you may not be getting the speed you are paying for. I am on a 20/5 connection and when my computer is on for longer than an hour the internet download speed with Verizon Fios starts to slow down until it is below 3mbs. It takes about 24 hours to get down to 3mbs but only about an hour or two to get down to about 6-7mbs when I am paying for 20mbs…
I have 3 computers in my home that have Windows Vista, Windows XP home edition and Windows Media Edition 2005. All of the computers run into this same exact issue, I have tried every setting I could think of with my 24 years of computer technical experience. I finally took one machine with Windows XP and ran a full format on the hard drive and reinstalled a fresh Windows Xp Operating system onto the hard drive so it is a bare bones OS. This way there is no other software on the machine that could possibly be causing the problem and found that when I connected online through Verizon Fios the machine still ran into the same exact issue. This proves to me that the issue is not on any of my machines.
Now all of this time my buddy that lives 1.2 miles away from my house has been having the same issue with three computers at his home also. He has Windows Vista on two machines and Windows XP Pro on one.
When I concluded that it was a Verizon Fios issue, after a few months of trying to get by, researching, diagnosing and losing much information in order to verify it was on Verizon’s side, I contacted technical support at Verizon’s online website. The agent and I went through the regular procedure that anyone would have to go through and I patiently explained what I had done to try to diagnose the issue. The agent came to the conclusion that he could not figure out the problem so he guessed that the Verizon router/modem may be the issue and told me he would send me a new one by mail.
I received the new Verizon router/modem, installed it and had to call to have it activated. Afterward it still had the same exact issue as the prior router/modem. So now we know it’s not my computers, it’s not the router/modem. My Verizon router/modem is connected right at the Optical Network Terminal (ONT), which is the box that connects the fiber-optics to your home, usually just inside or outside your garage wall. Mine is just outside…
From here my buddy, who has been having this problem also the entire time, called the local office of Verizon Fios and an installer was setup to come over to his home and trouble shoot the issue. My buddy called me and told me when the installer was headed to his home and I met him at his home to see what the installer found and in hope that my issue would be fixed at the same time. The installer went through the system at his house and was frustrated about not finding the reason for the issue and ready to leave without fixing anything. I simply asked that he stay long enough to see the issue present itself within an hour-hour and a half.
His laptop itself already showed the speed drop from 20mbs to between 16-17mbs, it was on its way down. He basically told us something that online tech support already stated to me, it is extremely difficult to prove it is on Verizon’s side. In other words it is extremely difficult to prove it, in a way that will convince Verizon to check its own servers, routers and software updates to their own systems. The installer, good guy, couldn’t/wouldn’t stay but we did convince him not to simply drop the issue. He called shop and they sent another installer out to take over the issue.
The new installer, great guy, got up to speed on what was already done at my buddies home. The first installer, checked and replaced the Verizon router/modem, checked the wiring and splitters. Basically went through the entire system up to the Optical Network Terminal (ONT), the box that connects the fiber-optics to your home. He pulled and replaced the Optical Network Terminal (ONT), thinking that perhaps the unit was compromised. While he was doing this job a tech was called and asked to stop by for assistance with the issue. The tech checked the computers inside and tried to do some settings that the main office informed him to try. I explained to the tech that the same issue was happening at my house, that I went through every setting I could think of and find online to help alleviate the issue. After some shop talk about what I had tried, including the full format and reinstall of the operating system on one of my machines, he just as I came to the conclusion that it couldn’t be with the computers and since everything that had to do with the Verizon Fios system from the street to the end-user computer had been checked, verified and/or replaced, the issue had to be coming from Verizon’s main office.
The installer had already checked the main at the road that has the 3x2 green service cover on it by the side walk. Everything was in good working order. The tech called the main office to see if my buddy and I were on the same hub, basically a big splitter that continues the service from the main office to the homes, we were not. So that was ruled out…
My understanding of the system ends there. The only other components I know of are the Main branch’s routers, servers and software.
Verizon had a new connection speed added to their system, 25/15 about the same time our issue began. So I am guessing that when they updated the system to include this new connection speed they corrupted the software for the 20/5 connection.
We have been waiting to hear from the tech that was at my buddy’s house, to see if the issue will be dealt with. My buddy has called him a couple of times and he has mentioned that he is trying to get it addressed and to call back if we hadn’t heard from him. He remembered who he and I were and what the issue was, so I believe he is taking it seriously. How far he can move the issue is beyond me…
I want to add that my buddy and I have been customers with the all in one package from Verizon Fios since their services have moved into our area, about a year and a half… It has only been since about June that this issue has presented itself, before then we were on 7th heaven with the speeds. We couldn’t have been more than happy with the services.
This issue has caused that to all go afoul, not only do the speeds get down to less than 3mbs but the speed is not smooth at all. Rather the 3mbs speed is stop and go, freezing in between at times, very choppy. Barely usable at times, unless you restart the computers and start over.
We are hoping that anyone with Verizon Fios Internet Services will keep an eye on their speeds by going to http://speedtest.net and doing tests to verify they are getting the speeds they are paying Verizon for.
This is what it will take for Verizon to take this issue seriously is to gather everyone on the system that may be having the same issue. I believe it is everyone that is within the 1.2 miles from my house to my buddy’s and will distribute flyers to each and every house in between.
If you find that your speed is not as fast as it should be please contact me and I will add you to the list, this way we can see exactly how far this problem covers and perhaps it will also help to show a pattern and understanding as to why the issue is present in the first place.
My contact information,
I have left this out here, you can contact me on these forums...Actually what this came down to was an issue between Windows Vista and an Ethernet Card on one of the machines in each of our local networks.
Even though our two machines are 6 years apart, we both have the same ethernet adapter on our main desktops. A RealTek RTL8139/810x Family Fast Ethernet Nic. It seems that the adapter does not work at the 20mbs download speeds with Vista. For some reason the adapter does not shut down when the computer does? I don't understand why but it doesn't, it keeps the connection alive. I removed the ethernet cable and pulled the power cable and had my two other computers still connected to the network and found that the issue was resolved. The way I found out was that I used the connections on my main computer to hook up one I had laying around and through further testing found the problem no longer existed...
Then I realized that my buddy and I installed Windows Vista at about the same time, a couple of months ago. Funny how you can forget an important detail like that. Then I remembered that he had the same identical ethernet adapter as I did, I had noticed that while trouble shooting his computer at his home but didn't think it was important at the time. Until the issue was narrowed down to the adapter, then it all seemed to all fall into line.
Quite humbling... In the end, anyone who has Windows Vista and this NIC probably will have problems with the 20mbs download speed of the computers on their own networks. I tried the latest Vista driver from RealTek and also tried to roll back the driver, with no success....
Back at the beginning when we first had fios installed in our homes there wasn't an issue when we had the 10/2 speeds and had Vista. Then we decided to change from Vista to XP because we both were having issues as to what programs you could use and which you could not, shortly after having fios installed. Then when verizon upgraded us to 20/5 we were amazed at the speed and still had no issue because we had XP on our main computers with the RealTek adapters...
We reinstalled Vista because it seemed like we were having more issues with XP by getting hit with Antivirus2008 and its variants and thought it time for a change back...
It didn't really hit us that Vista could be the culprit because we both have a laptop in our networks that have had Vista on them from the get go when there were no issues... We also didn't notice just how bad it was right away and over time kind of left the Vista install out of the equation.
Just strange that one computer can effect all the other computers on the network, even when it is shut down...
I allowed the other two computers to run 24hours and the issue did not present itself, when I added the main computer with the RealTek adapter back to the mix it reappeared. The Realtek adapter is the only real common denominator between his machine and mine.
So now we have three choices,
We can go back to Windows XP.
We can buy a new NIC or a wireless card to replace the RealTek...
Hopefully this post will help anyone else who runs into this problem, it has been very frustrating to say the least...
Thanks to everyone for their help and I apologize for complaining about verizon when it was not a verizon issue. I came to the conclusion that the only part verizon really played was upgrading us to a 20/5 tier which I am thankful for...
Would be nice if this card was on a list that Verizon support could use to troubleshoot , diagnose or eliminate for future support issues.
Message Edited by keiser0619 on 08-06-2009 03:58 PM -
Problem with the back camera in iPhone 4 (Black Shadow)
Hi, I have a problem with the back camera. When turned on I can see a black shadow on one side and when I take the photo, appears in all the photos.
I searched on the Internet to resolve this problem but I haven't been successful. A friend told me that maybe it is dirt that was introduced into the cover but I don't think It's true.
The iPhone haven't dropped me for some quite time and don't crashing.
Look here is a photo to show you how the black shadow looks like:
Please, anyone know what the problem can be?It certainly does work.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved. -
Has anyone had problems with the clock app in iOS 6?
The clock app has been updated and now allows me to use a song as my alarm tone. Have been wanting apple to do this for a long time. Problem is that when alarm goes off I get no sound. The phone just vibrates. I do not have the phone muted. Guessing this is a glitch in the app? Anyone else having similar problem?
Been using iOS 6 now for a couple weeks on an iPad 2 and twice have relied on it as an alarm clock. Both times it's failed to play the song I've designated as the alarm. I've tried it with the cover open and closed, volume maxed and not. Each time, after the designated alarm time, I've opened the iPad up & entered the security code only to be greeted by the alarm message pop up. That's it.
Kinda frustrating, to say the least.
Am I using it incorrectly? Having used the clock on the iPhone this way in earlier versions of iOS, I've never had an issue. Would like to leverage this functionality, but being 0 for 2, not sure I want to risk a third time...
Thoughts? -
What's the problem with the .f4m file?
f4m file content(not work):
http://localhost:10009/UploadFiles/Video/Video/20128/201208141534459942.f4m
<?xml version="1.0" encoding="UTF-8"?>
<manifest xmlns="http://ns.adobe.com/f4m/1.0">
<id>Dynamic Streaming</id>
<duration>59</duration>
<mimeType>video/x-flv</mimeType>
<mediaType>recorded</mediaType>
<baseURL>rtmp://testserver/vod</baseURL>
<media url="Video/Video/20128/201208141534459942_480x320_15fps_360kbps_flv" bitrate="360" width="480" height="320" />
<media url="Video/Video/20128/201208141534459942_640x480_15fps_768kbps_flv" bitrate="768" width="640" height="480" />
<media url="Video/Video/20128/201208141534459942_1280x720_15fps_1500kbps_flv" bitrate="1500" width="1280" height="720" />
</manifest>
The invidual file(work):
rtmp://testserver/vod/Video/Video/20128/201208141534459942_480x320_15fps_360kbps_flv
The invidual file's extension is ".flv", what need i to modify to make the f4m file worked?In addition to the previous answers, the problem with the Seagate HD's involved in the recall is that they have a very high failure rate, to the extent that Apple expanded the recall to cover more computers than it initially did. For example, a user on Macintouch (another online Mac support community that is well worth checking out) reported that his company bought 40 iMacs and 25 of them needed their 1TB Seagate drives replaced.
So if you can, get somebody with access to your computer to backup its HD as soon as possible if you don't already have a full backup. -
Hello everyone,
I've recently updated the firmware for my MacBook Pro (Early-2011) along with the iTunes update. Since yesterday, I've been experiencing problem with the screen. When the screen dims, it doesn't come back to normal when I move the cursor or type on the keyboard. Instead, it takes about 25 seconds to come back to normal.
Same thing when the screen goes to sleep, it doesn't come back to normal instantaneously when the cursor is moved!
This problem only started to occur after the latest firmware update. What is the problem and is there is solution?Sam,
The AppleCare warranty does not cover accidental damage, including dropping. You can try resetting, or restoring, but I think you'll need to try a 3rd party iPod repair service (www.ipodresq.com, for example). -
I used to be able to print labels for burned CDs with the cover being the playlist name and the other side the song titles...now the titles print out compacted, overlapping each other and illegible. I thought it was the printer but it happened w/1 other printer as well, which I used before for this exact thing w/no problem.
Try cleaning the print head with rubbing alcohol wipe, then replace your print head. Keep pushing the Ok.
Go to this link and HP shows you how.
support.hp.com/us-en/document/c01643079
Lucky for me it worked! -
Nokia N85, and my problems with the Nokia N96
Hi there,
First of all, i have both phones (after buying the n85, because of issues with the N96), when i go to send a large file from the n96 to the n85 via bluetooth, it wont allow it as it says not enough memory, it seems that you can only send, what free memory your phones internal system has, im deeply confused as the video im sending is over 88mb, and was passed down from my previous nokias without any problems whats so ever, any ideas anybody??????
Secondly i feel a fool, as i bought like i said the n85 because of the problems with the and i quote" flagship model n96".... well, i can honestly say, ive wasted my money, because after installing the newest firmware 11 on it, it has since been running like a dream, albeit like it should have done last month, but i musnt grumble, now i need to decide which one to put on an auction site.
ps the n96 was bought with 3 network, the other from an auction site, both work fantastically well with the 3 network.
ashtonHi, beg to differ, I would sell the 96. The 85 is far better,OLED screen; a battery that lasts for days not hours; FM transmitter for when you are in your mates car who doesn't have a bluetooth radio; it breathes!!! is sleeker and of course it has a lens cover, for crying out loud why didn't they fit one to the 96!
-
Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?
The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.) -
I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.
Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?
-
I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!
Maybe you are looking for
-
Firefox.exe - Entry Point Not Found
FireFox 10, crashed and can't open. Tried uninstalling and reinstalling. I get this error message when trying to open; "'''''The procedure entry point ?IsWrapper@js@@YA_NPBUJSObject@@@Z could not be located in the dynamic link library mozjs.dll'''''"
-
Data generator for NVARCHAR2 doesn't work
HI, I try to use data generator to populate the table Employees, it gives good values in the test run, but when I press "Create data as SQL" and run the query it gives an error: SQL> insert into SYSTEM.EMPLOYEES (EMPLOYEE_ID, FIRST_NAME, LAST_NAME, E
-
Explain Plan understand technique & Query optimizing check list
Hello gurus, Can some body help me with doc available or your experience to tell on how to understand Explain Plan & Query optimizing check list. Thanks..
-
Photo Elements 12, Mac OS X 10.9.5, Trying to combine two images side by side, same height. Get this message: "Panorama could not be created as some images could not be automatically aligned". Tried with several different images, same height each co
-
TS3274 buttom not function in I-pad
I already reinstall the I-Pad but the still having problem at the both of buttom for manually adjusted volume of i-pad and the buttom to shut down /swift off buttom for my I-pad. both of them are not function why is it broken or setting problem can