Problem with the data source and web.xml

I have an issue where JSC is removing my resource reference:
<resource-ref>
<description>Creator generated DataSource Reference</description>
<res-ref-name>jdbc/localOracleDatabase</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
from the web.xml and sun-web.xml.
The application has been working great in the IDE for months then wham, no more data source definition. I try and add the reference manually and the IDE takes it out. I am "NOT" adding it to the .xml's in the build area. Why is JSC removing the data source entry?

This continues to be a problem. The only way that I can get around the problem is to drag a table from the data source onto the design pallete and then the datasource is added back to the web.xml. I can run fine for 10 or 15 runs then the entry is once again removed from the web.xml.
Help please!

Similar Messages

Problem with a Data Source in Web Logic

Hi everybody,
Currently i am deploying a 11g ADF application, i am testing my application in a Web Logic 10.3.2.0, and in the beginning all works OK, but when the user test the application like a half of hour the data source throws this exception:
Messages
Test of MOR_DS_ORA2 on server soa_server1 failed, reason:
Connection test failed with the following exception: weblogic.common.resourcepool.ResourceUnavailableException: No resources currently available in pool MOR_DS_ORA2 to allocate to applications. Either specify a time period to wait for resources to become available, or increase the size of the pool and retry..
This error only occur in the development server of the company, never in the embed WL of my JDeveloper 11 g
Checking my code (appModuleImpl where is all the logic and integration with my DB) i don't see any wrong.
I call SP like this:
String stmt = "BEGIN XXMOR_FUNCIONAL_PKG.XXMOR_SOL_REPROCESAR_PR(?, ?); END;";
CallableStatement st = null;
try {
st = getDBTransaction().createCallableStatement(stmt, 2);
st.setInt(1, idSol);
st.setString(2, rw.getTrackingIdConcom());
st.execute();
System.out.println("Exito.");
catch (SQLException e) {
throw new JboException(e);
finally {
if (st != null) {
try {
st.close();
catch (SQLException e) {}
Execute some querys like this:
public ArrayList getElementsByArguments(String query){
ArrayList al = new ArrayList();
ResultSet rs = null;
try {
rs = getDBTransaction().createStatement(0).executeQuery(query);
ResultSetMetaData rsMeta = rs.getMetaData();
int numColumnas = rsMeta.getColumnCount();
while(rs.next()) {
for (int i = 1; i <= numColumnas; i++) {
al.add(rs.getString(i));
} catch (SQLException e) {
getDBTransaction().commit();
return al;
And some insert and update like this:
public String setNewFzaVta(Number idSegNeg, String idenFzaVta, String nomFzaVta, String region, String copysOrden,
String copysFecha, String mutlifuerza, String rtcrdAut, String autCorreo, String mercadotecnia,
String divCanal, String conCom, String activa, String notificacion, String createBy, Date currentDate,
String matloc, Number tolerancia, String rate){
XxmorFzasVtasTabViewImpl u = (XxmorFzasVtasTabViewImpl)getXxmorFzasVtasTabView1();
XxmorFzasVtasTabViewRowImpl newRow = (XxmorFzasVtasTabViewRowImpl)u.createRow();
SequenceImpl seq = new SequenceImpl("XXMOR_ID_FZAVTA_SQ", getDBTransaction());
Number seqNextval = seq.getSequenceNumber();
newRow.setIdSegNeg(idSegNeg);
newRow.setIdFzaVentas(seqNextval);
newRow.setIdentFzaVentas(idenFzaVta);
newRow.setNombreFzaVentas(nomFzaVta);
newRow.setRegion(region);
newRow.setCopysXOrden(copysOrden);
newRow.setCopysXFecha(copysFecha);
newRow.setMultifuerza(mutlifuerza);
newRow.setRtcrdAuthAut(rtcrdAut);
newRow.setAutXCorreo(autCorreo);
newRow.setMercadotecnia(mercadotecnia);
newRow.setDivXCanal(divCanal);
newRow.setCondicionesComerciales(conCom);
newRow.setActiva(activa);
newRow.setNotificacionExtInt(notificacion);
newRow.setCreatedBy(createBy);
newRow.setCreatedDate(currentDate);
newRow.setMatloc(matloc);
newRow.setAutTolerancia(tolerancia);
newRow.setGetRate(rate);
u.insertRow(newRow);
getDBTransaction().commit();
return seqNextval.toString();
Can anybody help me ! ????

Hi,
from the original post it is not obvious from where the code is called and if the AM is released properly. So if you face the same issue, maybe you can explain more
Frank

Help In keithley 2400 VI!!(Problem with the data logging and graph plotting)

Hi,need help badly=(.
My program works fine when i run it,and tested it out with a simple diode.The expected start current steps up nicely to the stop current.The only problem is when it ends,i cannot get the data log and the graph,though i already have write code for it.Can someone help me see what's wrong with the code?I've attached the necessary file below,and i'm working with Labview 7.1.
Thanks in advance!!!
Attachments:
24xx Swp-I Meas-V gpib.llb ‏687 KB

Good morning,
Without the instrument it might be hard for others to help
troubleshoot the problem. Was there a
specific LabVIEW programming question you had, are you having problems with the
instrument communication, are there errors?
I’d like to help, but could you provide some more specific information
on what problems you are encountering, and maybe accompany that with a simple
example which demonstrates the behavior?
In general we don’t we will be unable to open specific code and debug,
but I’d be happy to help with specific questions.
I did notice, though, that in your logging VI you have at
least one section of code which appears to not do anything. It could be that a small section of code, or
a wire was removed and the data is not being updated correctly (see pic below). Is your file being opened properly? Is the data being passed to the file
properly? What are some of the things
you have examined so far?
Sorry I could not provide the ‘fix’, but I’m confident that
we can help. Thanks for posting, and
have a great day-
Message Edited by Travis M. on 07-11-2006 08:51 AM
Travis M
LabVIEW R&D
National Instruments
Attachments:
untitled.JPG ‏88 KB

Problem with the Date format and sending it to R/3

Hi all,
I have an Adaptive RFC application which fetches the data from the R/3 and displays the Employee's Personal Data.
I am using a ZFM which is customised as per the requirement from the Standard BAPI_EMPLOYEE_GETDATA.
Now the Problem i am facing is Date is default and Optional Parameter in RFC.
If i execute the RFC in R/3 without Date it is not filling the Internal Tables. And if i pass the Date it is filling the Internal Table and fetches the Records.
So in WD application i am inputing Employee FirstName, LastName or the Employee ID.
User can give any of the above input or combination of FirstName and LastName Or only the Employee ID.
Now the Main Problem is of Date which is of type Date.
I have also tried the SimpleDateFormat Class, but i am not able to achieve the result.
I have also seen the Links and threads on SDN, but unable to solve the problem.
So pls help me out asap.
Thanks & Regards,
Dhruv Shah

Hi ,
By default , RFC accept date format of SQL date (yyyy-mm-dd) . If you are using a date picker from WD, it directly set the date in SQL date format. Incase if you are trying to pass date to RFC in some other way you have to convert that into SQL date format before passing.
if you are passing String date of format dd-mm-yyyy , you try this method to convert that to SQL date and pass to your RFC.
public java.sql.Date sqlDateConvert( String date) {
    //@@begin sqlDateConvert()
     java.sql.Date dateObj=null;
     try{
          StringTokenizer tempStringTokenizer = new StringTokenizer(""+date,"-");          int dd=Integer.parseInt(tempStringTokenizer.nextToken().trim());
                                int mm=Integer.parseInt(tempStringTokenizer.nextToken().trim());
          mm=mm-1;
          int yyyy=Integer.parseInt(tempStringTokenizer.nextToken().trim());
          Calendar cal =Calendar.getInstance();
          cal.set(yyyy,mm,dd);
          dateObj = new java.sql.Date( cal.getTime().getTime());
     }catch(Exception e)
          return dateObj;
Hope this will help you.

Spotify and facebook problem with the date

Hi, everyone.My spotify account have a problem with the date. I changed the date on facebook and nothing happens with that, the spotify account has a wrong date, is not the same as facebook account

Hi ,
By default , RFC accept date format of SQL date (yyyy-mm-dd) . If you are using a date picker from WD, it directly set the date in SQL date format. Incase if you are trying to pass date to RFC in some other way you have to convert that into SQL date format before passing.
if you are passing String date of format dd-mm-yyyy , you try this method to convert that to SQL date and pass to your RFC.
public java.sql.Date sqlDateConvert( String date) {
    //@@begin sqlDateConvert()
     java.sql.Date dateObj=null;
     try{
          StringTokenizer tempStringTokenizer = new StringTokenizer(""+date,"-");          int dd=Integer.parseInt(tempStringTokenizer.nextToken().trim());
                                int mm=Integer.parseInt(tempStringTokenizer.nextToken().trim());
          mm=mm-1;
          int yyyy=Integer.parseInt(tempStringTokenizer.nextToken().trim());
          Calendar cal =Calendar.getInstance();
          cal.set(yyyy,mm,dd);
          dateObj = new java.sql.Date( cal.getTime().getTime());
     }catch(Exception e)
          return dateObj;
Hope this will help you.

Problem with whitespace then loading and saving xml

i do not know how to handle this problem. i modifed a texteditor to send XML to a server and load XML back to the container.
but then i do changes to the Textlayout it shows up like this --->
Text in Container not modifed
Text in Container modifed ---> with space beween the colorchanged string
Text inContainersend and loaded ---> i think this has something to to with the
TextFilter.export(_textFlow,TextFilter.TEXT_LAYOUT_FORMAT,ConversionType.XML_TYPE)
can someone give me a hint...

Hi,
the link is --->
http://www.horstmann-architekten.de/contentmanagment/SimpleEditor.html
its a modified example of the texteditor provided by Adobe. You can send a xml to the server. and also read it from the server. You just use the xml identifer to give the xml a name.
Try it out:
1. change the text and
2. give a XML-Identifer
   and then send it to the server. --> send to server
3. type in the XML-Identifer you have used and
4.   load it from the server ---> Load from Server Button
evering works ok exept the columns formating.
I Think the colums Formating is not embeded in the XML as it should be. I attached the Files. (Newbie programmer)
With best regards
Michael Sprinzl
--- robin.briggs <[email protected]> schrieb am Do, 17.9.2009:
Von: robin.briggs <[email protected]>
Betreff: Problem with whitespace then loading and saving xml
An: "Michael sprinzl" <[email protected]>
Datum: Donnerstag, 17. September 2009, 2:12
Sounds like you have two different issues going on: (1) inline graphics aren't coming out correctly when you use the TextLineFactory, and (2) columns aren't working correctly. It's difficult for me to tell by looking at the application you link what is going wrong. One of the examples does seem to have columns working -- can you be more specific about what you're doing, and what results you are seeing? As for the inline graphics, there is a timing issue involved with using URLs, due to the asynchronous loading. See this comment in the docs for TextFlowTextLineFactory:
Note: When using inline graphics, the source property of the InlineGraphicElement object   must either be an instance of a DisplayObject or a Class object representing an embedded asset.   URLRequest objects cannot be used. The width and height of the inline graphic at the time the line   is created is used to compose the flow.
- robin

Facing lot of problems with the DATA object -- Urgent

Hi,
I am facing lot of problems with the data object in VC.
1. I created the RFC initially and then imported the data object in to VC. Later i did some modifications to RFC Function module,and when i reload the data object, I am not able to see the new changes done to RFC in VC.
2. Even if i delete the function module, after redeploying the IVIew, results are getting displayed.
3. How stable is the VC?
I restarted the sql server and portal connection to R3 is also made afresh.... still i am viewing such surprise results..
please let me know what might be the problem.

Hi Lior,
Are u aware of this problem.
If yes, please let me know...
Thanks,
Manjunatha.T.S

Problem with the date conversion

Hi Friends,
i am facing the problem with the date conversion, Actuall my requirement is to pass the date to the screen based on the user setting roles(SU01).
I have fetched the user setting date format by using the funciton module SUSR_GET_USER_DEFAULTS, The function module picks the exact user date setting (Like as MM/DD/YYYY, MM.DD.YYYY, DD.MM.YY).
After that i have implemented the FORMAT_DATE_4_OUTPUT funciton module for converting of the user role setting date format into system date format.
for the english language case the funciton module FORMAT_DATE_4_OUTPUT works fine but the funciton module not supported for other languages
Can you please provide the Function Moudle for user setting date conversion.
The funciton module is most important for us,
Thanks
Charan
Moderator message: date conversion questions = FAQ, please search before posting.
Edited by: Thomas Zloch on Dec 21, 2010 2:19 PM

Hope this logic helps you.
DATA LF_DATE TYPE DATS VALUE '21122010'. " 21-dec-2010
DATA LF_DATE_BI(10).
WRITE LF_DATE TO LF_DATE_BI. "Now LF_DATE_BI contains the date in user format
"Now populate the value LF_DATE_BI to the screen field

I have a problem with the effect gallery and the saving libraries in Illustrator CS6

Hi everybody
I have a problem with the effect gallery and the saving libraries in Illustrator
1. When you go to to effects > effect Gallery the the sketch filter always is black and white. Is this normal? In Photoshop you can set your background and foreground and the sketch effects takes those colors. Is there any way to do this in Illustrator? I have tried changing the colour of the fill and stroke but nothing...
2. In the same area as before effects > effect Gallery .... In Photoshop you can add multiple filters with the create new button. Always is off is there anyway to make it available? or the only way is to by creating several individual ones and manage then in the appearance panel ...
3. I saved a brush library and now it appears in the user defined area so I can get it in any document, that is good but any one knows how to delete a user undefined library?
Many thanks in advance for the help .... I look forward for the reply =)

I see that it is six months ago that I first posted this. Nothing has changed. When I use affixa to create a message with an attachment from my gmail account in firefox, the message is created in drafts, but the gmail window is closed and I have to re-open it. Not critical, but annoying.
Now there is a plug-in on the affixa site that is supposed to be designed for Firefox, and which affixa support claims should take care of this. And I've downloaded it twice. When you download it and open it, it says that it will be installed when Firefox restarts, and gives you a button to restart Firefox. But after you click that button and firefox disappears and re-appears, the affixa plug-in is NOT in the plugin list.
Please, somebody, HELP.

Apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?

apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?

No. Apple replaced the disk drive with a solid state drive (SSD) instead. The SSD is faster the old disk drive.
Allan

I'm Having problems with the video freezing and the sound carrying on since I up graded my iPad to ios8 BBC IPLAYER

I Am having problems with the video freezing and the sound carrying on whilst watching BBC IPLAYER ITV PLAYER until I reboot video and the problem acures again

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

I'm having a problem with the application Dropbox and I want to uninstall it. In finder it does not allow me to move it to trash telling me the dopbox application is open. How do I close it? when it shows up nowhere as an open application?

I'm having a problem with the application Dropbox and I want to uninstall it. In finder it does not allow me to move it to trash telling me the dopbox application is open. How do I close it? when it shows up nowhere as an open application?

Is there a DropBox icon up in the menubar you can click on & see quit DropBox?
https://www.dropbox.com/help/41

I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

I fixed the problem with the whole 'waiting' and not loading but now some of my apps won't open, what can I do?

- Try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Purchase/install any new app
- Try the remaining items of:
iOS: Troubleshooting applications purchased from the App Store

I have problem with the security questions and i dont know the answer. How i change the questions ?

I have problem with the security questions and i dont know the answer. How i change the questions ?

See Here... ask to speak with the Account Security Team...
Apple ID: Contacting Apple for help with Apple ID account security
Or Here > Apple Support iTunes Store Contact

Why I had no problems with the VZW employees and other people have?

I think that most people who cannot resolve problems with the VZW have an attitude problem.
Wise saying: you can get more with honey than with vinegar.
Since I “upgraded” my old Samsung Sway to a new Samsung Intensity III, in the past three weeks I spent many hours dealing with the VZW store employees, customer service reps, and tech support people. The phone was replaced two times, and I had no problem getting the replacements.
The third phone did not working how I expected.
Today I called VZW customer service and said I don’t need anymore trouble shooting and I wanted find a resolution, which will be satisfactory to both of us. After a short conversation with a customer service rep, I was connected with a tech support. I told him that I don’t need any more trouble shooting on the Samsung Intensity III because I already spent HOURS doing that on three devices.
We spoke about what the VZW could offer me, about replacements with different phones, etc. Our conversation ended with me offering the resolution that could satisfy me, which was to keep this phone and my account will be credited for the $30.00 “upgrade” fee and I will buy Samsung Sway on eBay. NO PROBLEM.
My account was credited and I was advise about the ESN number and activation.
Why I had no problems with the VZW employees and other people have? The answer is simple. I did not have attitude when I was spoke to them.
So if you want the problem to be resolved, put your anger in you pocket before you start the conversation. You can say that you are angry, frustrated, etc like I did, but add that you understand that this is not their fault that the manufactures makes a crap phones.

Yes, you are right. I lost my upgrade. Also, it’s true that I could buy the phone on eBay… if I knew then what I know now. In the past, I never had problem with any of my phones. Doing an upgrade with the VZW was a normal thing for me. I didn’t expect that Samsung Intensity III would be a junk phone. My last upgrade was 4 years ago. I had $50.00 ‘new every two’ credit on my account, which was used for an upgrade. I lost the $50.00 credit paying for Samsung Intensity III. Sometimes we learn from our mistakes or from a bad experience. Three weeks ago I did not know that I could buy a phone on eBay and activate with VZW without paying $30.00.
Samsung Sway is coming from …eBay – keep your fingers crossed for me.

Problem with the data source and web.xml

Similar Messages

Maybe you are looking for