Problem with the flip/rotate screen
my screen wont rotate when i put my phone sideway......how do i fix? it totally stopped doing it...this stupid phone is annoying me...
radical24 wrote:
contact nokia care as these games are not avaliable anywhere that i know of for redownload. i know its crazy but they could potentially be the only ones to help you in this situation. are these full games or demos? i have not even launched either one of these games on my phone even once so i dont know. if they are demo then who cares but if they are full games then for sure give them a call.
most of the time calling them is reallyyyyyy useless and waste of time. most of the time they say ship it to us and we will reinstall them for u. that's what they told me when i called them to get accuweather again !
Similar Messages
-
Problem with the default selection screen condition
hi guys,
I have got some problem with the default screen given by the PNP logical database, P0000 infotype automatically populated according to the condition given in default screen.
Reg,
HariharanDon know what u r trying to acheive.
1) when u have specified PNP in the logical databse field of attributes of program, the SAP wil proivde u default PNP screen and here u can also add ur paramters if u want.
2) in the program u have to declare like
INFOTYPES: 0000,0001. "Etc
for all the infotypes u want to use in the program.
3) it is the GET PERNR event which wil fil all the p0000 and p0001 (internal tables for al the infotypes declared via INFOTYPES syntax as shown above)
4) after tht get pernr, u now have data in P tables and u can use it for further reporting.
5) refer below dummy code -
REPORT ZPPL_PREVEMPLOYERS message-id rp
line-size 250
line-count 65.
*Program logic :- This Report is used to Download all the Previous
* Employer (IT0023) records of the employees
*eject
*& Tables and Infotypes *
tables: pernr.
infotypes: 0000,
0001,
0002,
0023.
*eject
*& Constants *
constants: c_1(1) type c value '1' ,
c_3(1) type c value '3' ,
c_i(1) type c value 'I' ,
c_x(1) type c value 'X' ,
c_eq(2) type c value 'EQ' ,
c_pl03 like p0001-werks value 'PL03'.
*eject
*& Selection-Screen *
parameters: p_file like rlgrap-filename default 'C:TempABC.xls',
p_test as checkbox default c_x .
*eject
*& Internal tables *
* Internal Table for Output
data: begin of t_output occurs 0 ,
pernr like pernr-pernr ,
nachn like p0002-nachn ,
vorna like p0002-vorna ,
orgeh_stext like p1000-stext ,
plans_stext like p1000-stext ,
begda like p0023-begda ,
endda like p0023-endda ,
land1 like p0023-land1 ,
arbgb like p0023-arbgb ,
ort01 like p0023-ort01 .
data: end of t_output .
*eject
*& Variables *
data: o_stext like p1000-stext,
p_stext like p1000-stext.
*eject
*& Initialization *
Initialization.
* Initialize Selection-Screen values
perform init_selction_screen.
*eject
*& AT Selection-screen *
at selection-screen .
* Check if Test run selected, download file name should be entered
if p_test is initial. "
if p_file is initial.
message e016 with 'Please enter file name'
'specifying complete path'.
endif.
endif.
*eject
*& Start-of Selection *
Start-of-selection.
get pernr.
clear t_output.
* Read Infotype 0
rp-provide-from-last p0000 space pn-begda pn-endda.
check pnp-sw-found eq c_1.
* Check if employee is active
check p0000-stat2 in pnpstat2. "pernr Active
* Read Infotype 1
rp-provide-from-last p0001 space pn-begda pn-endda.
check pnp-sw-found eq c_1.
* check if employee belongs to PL03
check p0001-werks in pnpwerks. "belongs to PL03
* Check if emp belongs to Active Group
check p0001-persg in pnppersg.
* Read Infotype 2
rp-provide-from-last p0002 space pn-begda pn-endda.
check pnp-sw-found eq c_1.
* Read Org Unit Text.
CALL FUNCTION 'HR_READ_FOREIGN_OBJECT_TEXT'
EXPORTING
OTYPE = 'O'
objid = p0001-orgeh
begda = p0001-begda
endda = p0001-endda
reference_date = p0001-begda
IMPORTING
object_text = o_stext
EXCEPTIONS
nothing_found = 1
wrong_objecttype = 2
missing_costcenter_data = 3
missing_object_id = 4
OTHERS = 5.
*Read Position Text.
CALL FUNCTION 'HR_READ_FOREIGN_OBJECT_TEXT'
EXPORTING
OTYPE = 'S'
objid = p0001-plans
begda = p0001-begda
endda = p0001-endda
reference_date = p0001-begda
IMPORTING
object_text = p_stext
EXCEPTIONS
nothing_found = 1
wrong_objecttype = 2
missing_costcenter_data = 3
missing_object_id = 4
OTHERS = 5.
* Gather all the required information related to the emp
move: pernr-pernr to t_output-pernr,
o_stext to t_output-orgeh_stext,
p_stext to t_output-plans_stext,
p0002-nachn to t_output-nachn,
p0002-vorna to t_output-vorna.
* Gather previous Employee details
loop at p0023.
move-corresponding p0023 to t_output.
append t_output.
endloop.
*eject
*& End-of Selection *
end-of-selection.
perform print_report.
* Downlaod the file
if not t_output[] is initial.
if p_test eq space.
perform download_file.
endif.
else.
write: 'No records selected' color col_negative.
endif.
*eject
*& Top-of-page *
Top-of-page.
* Print Header
perform print_header.
*eject
*& Form download_file
* Description :
FORM download_file .
DATA: full_file_name TYPE string,
z_akt_filesize TYPE i .
full_file_name = p_file.
* download table into file on presentation server
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
filename = full_file_name
filetype = 'DAT'
NO_AUTH_CHECK = c_x
codepage = '1160'
IMPORTING
FILELENGTH = z_akt_filesize
CHANGING
data_tab = t_output[]
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
not_supported_by_gui = 22
error_no_gui = 23
OTHERS = 24.
IF sy-subrc NE 0.
MESSAGE e016 WITH 'Download-Error; RC:' sy-subrc.
ENDIF.
ENDFORM. " download_file
*eject
*& Form print_report
*Description:
FORM print_report .
data: i type i,
w_count type i.
sort t_output.
* Print the report
loop at t_output.
i = sy-tabix mod 2.
if i eq 0.
format color col_normal intensified on.
else.
format color col_normal intensified off.
endif.
write:/1 t_output-pernr ,
10 t_output-vorna(25) ,
35 t_output-nachn(25) ,
61 t_output-orgeh_stext ,
102 t_output-plans_stext ,
143 t_output-begda ,
154 t_output-endda ,
168 t_output-land1 ,
178 t_output-arbgb(40) ,
219 t_output-ort01 ,
249 space .
endloop.
uline.
Describe table t_output lines w_count.
Skip 2.
Write:/ 'Total No of Records Downloaded: ' color col_total,
w_count.
ENDFORM. " print_report
*eject
*& Form print_header
*Description:
FORM print_header .
skip 1.
Uline.
format Intensified on color col_heading.
write:/1 'Pers. #' ,
10 'Last Name' ,
35 'First Name' ,
61 'Org Unit' ,
102 'Position' ,
143 'Beg Date' ,
154 'End Date' ,
168 'Cntry Key' ,
178 'Prev Employer' ,
219 'City' ,
249 space .
format intensified off color off.
uline.
ENDFORM. " print_header
*eject
*& Form init_selction_screen
*Description:
FORM init_selction_screen .
refresh: pnpwerks,
pnppersg,
pnpstat2.
clear: pnpwerks,
pnppersg,
pnpstat2.
pnpwerks-sign = c_i.
pnpwerks-option = c_EQ.
pnpwerks-low = c_pl03.
append pnpwerks.
pnppersg-sign = c_i.
pnppersg-option = c_EQ.
pnppersg-low = c_1.
append pnppersg.
pnpstat2-sign = c_i.
pnpstat2-option = c_EQ.
pnpstat2-low = c_3.
append pnpstat2.
ENDFORM. " init_selction_screen -
Does anyone have a problem with the ipad air screen?
I bought an ipad air last week and the left edge of the screen was darker than the other side. It was obvious so I just returned it and bought a new one since the store didn't have the same style in storage. I bought another one from another retailer, and just found the same problem, but not as serious as the former one. So I just took it back to the store the next day and exchange another one. Unfortunately, the third one had the same problem at the up-left corner of the screen. I admit that I am picky, but I think I pay this amount of money so I deserve perfect screen. If the brightness of the two sides is different, I dont think it is a product of good quality.
Just want know if anyone else have the same problem with me. Or you just can bear the small diffrence of display. BTW, in China, it is reported spreadly that the ipad air screen has a problem. They even generalize the serial number for problematic ipad air.Yep. Many quality control problems. The new mini has fewer issues. No problems with older models.
Steve Jobs, where are you when we need you! -
Why my ipad have problem with the rotation screen
i have a problem with the rotation screen is locked, i try everything but nothing is happening help
If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, double tap the home button and swipe to the right and look for the lock icon all the way to the left.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button -
Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!
I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.
-
I am have problems with the ipad mini, it is a little crazy. It controls by itself, opens and closes application zooms in and out, end my facetime calls, Also Un certain part of the screen is no longer responsive to the touch, it Should be having so much problems. Thanks for your help.
iPad, iOS 7.0.4Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I have a problem with the iTunes Store, I have an ipod and an iphone 2. I have a PC with Windows Vista Home Premium 2007, entering into iTunes Store on the main screen I get only AppStore, Podcast and iTunes U. In my screen I get only ipad2 Podcast, iTunes U Downloads. My problem is I can not access any application to download music, videos, books, etc..
ITunes will be installed wrong or what should I do to activate these options?Go to the front page of the Store, and click Change Country. Make sure it is set to the country where you actually are.
Then you will be able to see everything that is for sale in your country, which, depending where you live, might or might not include music. -
My iPod Touch (3rd Gen) is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. It varies between not responding when I tap the screen and acting as if I double-tap or tap and hold when I tap. Every so often it freezes for a minute or so and then comes back. The scren is constantly changing sizes too such that I often can't see most of the top status bar or other edges. This makes typing almost impossible, ruins most games and generally makes everything difficult, but otherwise the iPod is working correctly. Powering off, shutting down apps, letting it sit have not worked. This has happened once before months ago, but the issue resolved itself somehow. Is this a common problem? Is there a fix?
Try this for the freezing
http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
Or if they don't work put it into recovery mode
See here
http://www.apple.com/support/ipodtouch/assistant/restore/
Then restore
http://support.apple.com/kb/HT1414 -
Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
Any way to fix it?only $99, i thought it was closer to $175.
-
Has anyone else had a screen separation problem with the ipad?
Has anyone else had a screen separation problem with the ipad?
Does it really matter whether anyone else has? If you have, that's a problem for you whether or not anyone else has experienced the same issue. Call Apple tech support or take the iPad to an Apple Store, if there's one in your area, and they'll replace the iPad unless it's determined that the problem was caused by some sort of accident rather than a factory defect.
Regards. -
with the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????
We are users here. We cannot possibly know when a new update will be available.
-
Problem with the browse sequence back and browse sequence next widget placed in the screen layout
Hi,
Some basics: We are using Robohelp 10 to generate multiscreen html5 output. We used the pharmaceutical screen layout downloaded from: http://helpx.adobe.com/robohelp/robohelp-screen-profiles-layouts.html but modified it to match our GUI.
We are having a problem with the browse sequence back and browse sequence next buttons placed in the screen layout from the widgets tool bar. We are in no way experts at this part of Robohelp...and the css portion of all this is a bit of mystery but we have managed to get mostly what we need. Now we just need these buttons to work. In the past we used Airhelp and things worked great. Can anyone help us understand why the sequence buttons are not showing up in the output even though it does in the topic preview?
Also
This shows up in the layout.css file:
a.wBSBackButton {
margin: 0 8pt 0 0;
padding: 0;
background-color: transparent;
img.wBSBackButton {
border: none;
a.wBSNextButton {
margin: 0 8pt 0 0;
padding: 0;
background-color: transparent;
img.wBSNextButton {
border: none;
Also btw, I forgot to mention that we are linking our FrameMaker files.
Appreciate the help.
Thanks!hi pradeep
It does not happen but if you Wait for a while that may be solved -
Just downloaded and installed new LR CC. No apparent problems with the D/I on my iMac, OS 10.10.3. however LR CC will not start. I get a momentary flash of the opening screen and then the program shuts down. From the posts it looks like this if a very common problem. Any help would be appreciated. Thanks.
Have you tried logging out of your CC desktop app, then logging back in again? Quit/Restart won't work, but logging out and back in should. See here: https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-
My ipod touch is having problems with the headphone jack when I rotate a little song stops
my ipod touch is having problems with the headphone jack when I rotate a little song stops
Hey Silverdemon, sounds like a short, most likely in the headphones. Try a different set of headphones with this iPod or try the headphones with a different device. If the problem stops with your iPod or it moves to another device, then replace the headphones. If within 1 year of date of purchase Apple will replace the headphones for free if problem is a defect, not abuse. If the problem continues with a different set of headphones, check the port for damage and foreign debris. If you note debris, attempt to remove it, if damage noted contact Apple and set up an appointment to have it evaluated. if nothing appears wrong, try plugging / unplugging to jack about 12 times maybe corrosion on the contacts if so that should clean it. Next thing to try reset your iPod. After that try restore from backup. Last resort, restore to new. Just make sure you make a full backup to your computer before you restore so no data is lost. If nothing works, contact Apple and set up an appointment to have your iPod evaluated. Good luck, Cheers.
-
Are there any other left eye dominant (or left handed) iPhone users that experience problems with the touch screen keyboard selecting the letter next to the one you'd intended..?
It's either hand right or left.
I have the same issue myself. Not sure if it's b/c my fingers are too big or if I'm really missed the letter on the keyboard.
Maybe you are looking for
-
Using Formula variable in a key figure formula
Hi Expert, Can anyone tell me how to use a formula variable to pass the fiscal year variable value (with offset values define in different columns) to the be used in the formula (if statements)? Currently, I create a formula variable using replacemen
-
How can i delete an uploaded file?
I uploaded a ppt file to share in a presentation, but i can't delete him. Who helps?
-
Using trial version of iWord. I know I can save a document as a ms word file. However, is there a way to have all docs saved as ms word docs automatically, without having to choose that option at each save?
-
RFC destination getting created
Hi All, I am creating scripts using SAPGUI command in the target system. The source system is WAS6.20 and the target system is 6.40. Whenever i create a recording using SAPGUI, an extra RFC destination is created with following naming convention: ECA
-
When I try and Share (export) a project, I get a Quick Time Error -50 Any Ideas? Apple Care is scratching their heads.