Problem with time duration code

Hi All,
I have recently set up a database for my website search page and have added some code (please see below) to the page which uploads the data to database so that after 60 days the data is automatically deleted from the database. BUT the data is being deleted before the 60 days is up. Does anyone have any ideas why this might be?
<?php
$con=mysqli_connect("****","*****","****","*****");
// Check connection
if (mysqli_connect_errno())
   echo "Failed to connect to MySQL: " . mysqli_connect_error();
mysqli_query($con,"DELETE FROM donation WHERE dateCreated < DATE_SUB(NOW(), INTERVAL 60 DAY");
mysqli_close($con);
?>
<?php

Ness_quick wrote:
Hi All,
I have recently set up a database for my website search page and have added some code (please see below) to the page which uploads the data to database so that after 60 days the data is automatically deleted from the database. BUT the data is being deleted before the 60 days is up. Does anyone have any ideas why this might be?
<?php
$con=mysqli_connect("****","*****","****","*****");
// Check connection
if (mysqli_connect_errno())
   echo "Failed to connect to MySQL: " . mysqli_connect_error();
mysqli_query($con,"DELETE FROM donation WHERE dateCreated < DATE_SUB(NOW(), INTERVAL 60 DAY");
mysqli_close($con);
?>
<?php
Do you know when the data is getting deleted? At what point after the date it was created?
If you don't get a positive answer I would test it out by switching the dateCreated column temporarily from 'timestamp' to 'date'. Create a few test entries and a few test dates and see what happens. Back up the database file first by exporting it as a .sql file to your desktop. Then if you mess it up you can reload it.
I know for sure that using the combination below with a 'date' column will delete the entry one day after it has expired.
< DATE_SUB(NOW(), INTERVAL 1 DAY");

Similar Messages

  • Problem with my exe code

    Hello,
    I have a small problem regarding to my code. I have attached the source code. There isn't any problem with the vi code. But when I convert the vi to exe, and double click the exe file in order to open it , the program is trying to start, I mean it is acting like I clicked the run button. I said it is not a problem, because all the values (test duration, delay duration, high limit, low limit) are zero. Therefore it is attempting to run, but only very small portion of the pressure reading occurs. What do you think about the cause of this problem? Thanks for your help.
    Ahmet
    Attachments:
    front panel1.jpg ‏47 KB
    Oksijen_Atolyesi.vi ‏45 KB

    Hi Ahmet,
    when duration and delay are zero, the your DAQ loop will (probably) run only once, thus giving you only small amount of data...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome
    Attachments:
    Oksijen_Atolyesi.vi ‏35 KB

  • Problem with Transaction-Duration Dialog

    Hello All,
    I wonder if somebody could shed a light on the problem that we're having
    with transaction-duration dialog service object. The problem is this.
    When we call the service object and its SQL statement fails (for
    example, because of constraint violation) Forte raises AbortException.
    It also clears the error stack, so we have no way to know what caused
    it, original error ("ORA -... Constraint Violation") disappears. All we
    get is this:
    USER ERROR: Access to a load balanced router member (which is a service
    object) failed for the reasons below.
    Class: qqsp_AbortTransaction with ReasonCode: SP_ER_USERABORT
    Error #: [601, 162]
    Detected at: qqdo_LbRouter::Route at 2
    Last TOOL statement: method tester.test, line 3
    Error Time: Thu Jul 2 15:56:40
    Distributed method called: SO_UmbrellaProxy.testAbortExc (object
    name
    site/sosa_sampleservice_cl0/th_testabort_cl0-bmso0x15d:0x1) from
    partition
    "TH_TestAbort_cl0_Client", (partitionId =
    DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x2, taskId =
    [DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d.4]) in application
    "Forte_cl0", pid 74 on node AANANIEV in environment archenv
    Originator: SP_AO_XACTMGR
    Exception occurred (locally) on partition "Forte_cl0_Client",
    (partitionId
    = DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x1, taskId =
    [DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x1.16]) in
    application
    "Forte_cl0", pid 74 on node AANANIEV in environment archenv.
    USER ERROR: Your transaction was aborted
    Class: qqsp_AbortTransaction with ReasonCode: SP_ER_USERABORT
    Error #: [402, 45]
    Detected at: XactMgr.TXAbort at 1
    Error Time: Thu Jul 2 15:56:40
    Originator: SP_AO_XACTMGR
    Exception occurred (remotely) on partition
    "TH_TestAbort_cl0_Part1-router", (partitionId =
    DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15b:0x9, taskId =
    [DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x2.17]) in
    application
    "TH_TestAbort_cl0", pid 18196 on node hp9000_1 in environment
    archenv.
    Has anyone experienced this problem with "transaction-duration" service
    object? Is there any way to find out the cause of "AbortException"? It
    seems impossible to catch the AbortException on the server partition,
    looks like Forte exits right away.
    Everything works fine with "message-duration" dialog, unfortunately it
    is not an option for us because of the way our batch programs were
    designed.
    Any help is greatly appreciated.
    Alexander Ananiev
    Claremont Technology Group
    916-558-4127
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    thanks Peter for trying to help
    ok, i've narrowed down the problem, it seems that when i try and save a file onto one partition of one of my ext drives it won't save to my last save dir but if i save to another partition/drive it works ok, also if i rename the 'dodgy' partition it also seems to work ok, so somehow the name of the drive has become corrupted.
    anybody ever heard of this? or how i could fix this as it's a quite annoying because alot of my audio files are referenced on this partition, so itunes or Cubase (audio sequencer) can't find my files now.

  • Hi, I have the following problem with Time Capsule: La imagen del disco de copia de seguridad "/Volumes/Data/MacBook Pro de Carlos.sparsebundle" ya está en uso. Please your comments to solve this problem, i can't made a backup. Thanks.

    Hi, I have the following problem with Time Capsule: La imagen del disco de copia de seguridad “/Volumes/Data/MacBook Pro de Carlos.sparsebundle” ya está en uso. Please your comments to solve this problem, i can't made a backup. Thanks.

    Try Here  >  http://pondini.org/TM/Time_Capsule.html
    Perhaps P 2  >  Time Machine could not complete . . . sparsebundle could not be accessed. (Error 109).

  • Problem with Time Dimension generating

    Hello, everybody.
    I have a problem with Time Dimension generating with the help of the Standard Wizard.
    1. I choose Dimensions -> New -> Using Time Wizard
    2. Set Name as "Time"
    3. On the next screen I choose ROLAP: Relational Storage
    4. On the next screen set Start year: 2003, Number of years: 3
    5. On the next screen choose all levels of the Normal Hierarchy
    On the 6-th step Wizard complete 60% of job and hang up doing nothing (buttons "Cancel" and "Help" is active).
    chapter "Create REL_TIME Dimension Using the TIME Dimension Wizard", step 1-6 of tutorial =(
    http://www.oracle.com/technology/obe/11gr1_owb/owb11g_update_getting_started_intro/lesson3/less3_relational.htm
    My system characteristics:
    Builder client 11.1.0.7.0, warehouse at local computer.
    can anybody give me any advice about this problem? =(
    thanks in advance.

    Had this issue been solved please?
    I have just come across the exact same problem and this post is the only one i managed to find which describes exactly what is happening to me.
    Thanks

  • Hello, i have a problem with this number code  213:19,  please help me!

    Hello, i have a problem with this number code  213:19,  please help me!

    dan
    What version of Premiere Elements and on what computer operating system is it running?
    If you are using Premiere Elements 13, have you updated it to 13.1 yet? If not, please do so using an opened project's Help Menu/Updates.
    What type of user account are you using....local administrator or domain type?
    Please review the following Adobe document on the 213.19 issue. Have you read that already?
    Error 213:19 | Problem has occurred with the licensing of this product
    ATR

  • HT1338 problems with time  machine and parallels desktop,  mac osx mountain lion 10.8

    have a good day, i have been problems with time  machine and parallels desktop, dont work in mac osx 10.8, i upgrate two mac´s (macbook air, imac), in the two machines shows problems, could you help me please.
    two machines have good ram memory (macbook air 11.1 2010 early , imac 2009 late).
    i am waiting for your help.
    thanks.
    Jesus.

    Take a look here:
    http://pondini.org/TM/Troubleshooting.html
    Specifically, you'll probably want to try item #A5 on that page, but there's a lot of other info there that may be useful.

  • Problem with Time Capsule backup

    My Time Capsule is a first gen (500 GB), and I recently upgraded to Lion on my iMac. It seems like right around the time I upgraded that I started having problems with Time Machine backups. They will complete, but then the disk does not eject from my desktop. I am running the Time Capsule buddy widget, and here's the log file:
    Starting standard backup
    Network destination already mounted at: /Volumes/TimeCapsule
    QUICKCHECK ONLY; FILESYSTEM CLEAN
    Disk image /Volumes/TimeCapsule/Stefano.sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    100.0 MB required (including padding), 174.27 GB available
    Copied 2353 files (2.0 MB) from volume Macintosh HD.
    100.0 MB required (including padding), 174.27 GB available
    Copied 1656 files (718 KB) from volume Macintosh HD.
    Starting post-backup thinning
    No post-back up thinning needed: no expired backups exist
    Backup completed successfully.
    Waiting for Spotlight to finish indexing /Volumes/Time Machine Backups/Backups.backupdb
    Waiting for Spotlight to finish indexing /Volumes/Time Machine Backups/Backups.backupdb
    Stopping backup to allow backup destination disk to be unmounted or ejected.
    Backup failed because the destination disk was ejected or disconnected unexpectedly!
    You can see at the end where I ejected the disk manually.

    I finally resolved this.  However, I had to erase the entire backup on my 3tb and start with a new backup.  I connected via hardwire to make it go faster.  No problems now.

  • Since I upgraded to 10.7.2 lion I have these problems with Time Capsule. What is the problem? thanks

    since I upgraded to 10.7.2 lion I have these problems with Time Capsule. What is the problem? thanks

    Unable to access disk image backup "/ Volumes / Time Capsule / iMac Admin. Sparsebundle" (error -1).
    Then?????

  • Another problem with Time Machine

    This is the second time I have experienced the following problem with Time Machine. After 2 months of backups it gets to a point where backups fail and I cannot enter time machine. In each instance I have only used 110GB of the 500GB space.
    Is there a better solution to fixing this problem than deleting the sparsebundle? That seems to be the only way to get it to back up again.

    backup is failing again:
    Oct 28 08:39:58 MBA /System/Library/CoreServices/backupd[8307]: Starting standard backup
    Oct 28 08:40:02 MBA /System/Library/CoreServices/backupd[8307]: FSMatchAliasBulk returned 0 while resolving alias to backup target
    Oct 28 08:40:07 MBA /System/Library/CoreServices/backupd[8307]: Backup failed with error: 19
    Oct 28 09:22:57 MBA /System/Library/CoreServices/backupd[8464]: Starting standard backup
    Oct 28 09:22:58 MBA /System/Library/CoreServices/backupd[8464]: Network mountpoint /Volumes/MPTC not owned by backupd... remounting
    Oct 28 09:22:59 MBA /System/Library/CoreServices/backupd[8464]: Network volume mounted at: /Volumes/MPTC-1
    Oct 28 09:22:59 MBA /System/Library/CoreServices/backupd[8464]: Backup requested due to disk attach
    Oct 28 09:23:28 MBA /System/Library/CoreServices/backupd[8464]: Disk image /Volumes/MPTC-1/MBA_001f5bd2c764.sparsebundle mounted at: /Volumes/Backup of MBA
    Oct 28 09:23:32 MBA /System/Library/CoreServices/backupd[8464]: Backing up to: /Volumes/Backup of MBA/Backups.backupdb
    Oct 28 09:23:32 MBA /System/Library/CoreServices/backupd[8464]: Backup requested due to disk attach
    Oct 28 09:25:44 MBA /System/Library/CoreServices/backupd[8464]: No pre-backup thinning needed: 242.1 MB requested (including padding), 351.94 GB available
    Oct 28 09:41:34 MBA /System/Library/CoreServices/backupd[8464]: Copied 990 files (72.4 MB) from volume MacBook Air HD.
    Oct 28 09:41:35 MBA /System/Library/CoreServices/backupd[8464]: No pre-backup thinning needed: 159.6 MB requested (including padding), 351.94 GB available
    Oct 28 09:44:09 MBA /System/Library/CoreServices/backupd[8464]: Bulk setting Spotlight attributes failed.
    Oct 28 09:46:13 MBA /System/Library/CoreServices/backupd[8464]: Copied 879 files (2.2 MB) from volume MacBook Air HD.
    Oct 28 09:47:18 MBA /System/Library/CoreServices/backupd[8464]: Starting post-backup thinning
    Oct 28 09:49:15 MBA /System/Library/CoreServices/backupd[8464]: Deleted backup /Volumes/Backup of MBA/Backups.backupdb/MBA/2008-10-27-090710: 351.94 GB now available
    Oct 28 09:50:46 MBA /System/Library/CoreServices/backupd[8464]: Deleted backup /Volumes/Backup of MBA/Backups.backupdb/MBA/2008-10-27-061332: 351.94 GB now available
    Oct 28 09:52:53 MBA /System/Library/CoreServices/backupd[8464]: Deleted backup /Volumes/Backup of MBA/Backups.backupdb/MBA/2008-10-27-050805: 351.94 GB now available
    Oct 28 09:52:53 MBA /System/Library/CoreServices/backupd[8464]: Post-back up thinning complete: 3 expired backups removed
    Oct 28 09:52:53 MBA /System/Library/CoreServices/backupd[8464]: Backup completed successfully.
    Oct 28 09:53:11 MBA /System/Library/CoreServices/backupd[8464]: Attempt to eject diskimage failed with status: -47, dissenting pid: 0
    Oct 28 10:23:16 MBA /System/Library/CoreServices/backupd[8603]: Starting standard backup
    Oct 28 10:23:19 MBA /System/Library/CoreServices/backupd[8603]: Network volume mounted at: /Volumes/MPTC-1
    Oct 28 10:23:27 MBA /System/Library/CoreServices/backupd[8603]: Disk image /Volumes/MPTC-1/MBA_001f5bd2c764.sparsebundle mounted at: /Volumes/Backup of MBA
    Oct 28 10:23:27 MBA /System/Library/CoreServices/backupd[8603]: Backing up to: /Volumes/Backup of MBA/Backups.backupdb
    Oct 28 10:23:28 MBA /System/Library/CoreServices/backupd[8603]: Error: (-50) Creating directory 2008-10-28-102328.inProgress
    Oct 28 10:23:28 MBA /System/Library/CoreServices/backupd[8603]: Failed to make snapshot container.
    Oct 28 10:23:33 MBA /System/Library/CoreServices/backupd[8603]: Backup failed with error: 2
    Oct 28 10:23:33 MBA /System/Library/CoreServices/backupd[8603]: Attempt to eject diskimage failed with status: -47, dissenting pid: 0
    Oct 28 11:23:16 MBA /System/Library/CoreServices/backupd[8729]: Starting standard backup
    Oct 28 11:23:16 MBA /System/Library/CoreServices/backupd[8729]: Network volume mounted at: /Volumes/MPTC-1
    Oct 28 11:23:20 MBA /System/Library/CoreServices/backupd[8729]: Disk image /Volumes/MPTC-1/MBA_001f5bd2c764.sparsebundle mounted at: /Volumes/Backup of MBA
    Oct 28 11:23:20 MBA /System/Library/CoreServices/backupd[8729]: Backing up to: /Volumes/Backup of MBA/Backups.backupdb
    Oct 28 11:23:21 MBA /System/Library/CoreServices/backupd[8729]: Error: (-50) Creating directory 2008-10-28-112321.inProgress
    Oct 28 11:23:21 MBA /System/Library/CoreServices/backupd[8729]: Failed to make snapshot container.
    Oct 28 11:23:26 MBA /System/Library/CoreServices/backupd[8729]: Backup failed with error: 2
    Oct 28 11:23:26 MBA /System/Library/CoreServices/backupd[8729]: Attempt to eject diskimage failed with status: -47, dissenting pid: 0
    Oct 28 11:24:05 MBA /System/Library/CoreServices/backupd[8729]: Stopping backupd to allow ejection of backup destination disk!
    Oct 28 11:24:11 MBA /System/Library/CoreServices/backupd[8747]: Backup requested by user
    Oct 28 11:24:11 MBA /System/Library/CoreServices/backupd[8747]: Starting standard backup
    Oct 28 11:24:11 MBA /System/Library/CoreServices/backupd[8747]: Network volume mounted at: /Volumes/MPTC-1
    Oct 28 11:24:12 MBA /System/Library/CoreServices/backupd[8747]: Disk image /Volumes/MPTC-1/MBA_001f5bd2c764.sparsebundle mounted at: /Volumes/Backup of MBA
    Oct 28 11:24:12 MBA /System/Library/CoreServices/backupd[8747]: Backing up to: /Volumes/Backup of MBA/Backups.backupdb
    Oct 28 11:24:12 MBA /System/Library/CoreServices/backupd[8747]: Error: (-50) Creating directory 2008-10-28-112412.inProgress
    Oct 28 11:24:12 MBA /System/Library/CoreServices/backupd[8747]: Failed to make snapshot container.
    Oct 28 11:24:17 MBA /System/Library/CoreServices/backupd[8747]: Backup failed with error: 2
    Oct 28 11:24:17 MBA /System/Library/CoreServices/backupd[8747]: Attempt to eject diskimage failed with status: -47, dissenting pid: 0

  • Problem with Time Capsule after backup session

    I have a problem with Time Capsule after a backup session. Our two Macs (on Maverick) loose connection with the station and the only thing that seems to help is unplugging the Time Capsule  and starting it again! After the next backup session the same thing happens again. The Macs seem not to be able to hold on to the connection and continually loose it.  The iPhones and iPads that we have (4 units) are not affected - it is the Mac Mini and Mac Powerbook that experiences this problem!
    I would be grateful for your help!
    Thor

    This is standard Mac issues and has been a bug floating around since Lion.. it hits some people worse than others.. but once it starts it is awful hard to get rid of.
    Just to confirm the connection to internet is not a problem?? Just the hard disk drops out?
    I recommend you
    1. Reset the TC to factory.. and start over with all new names.. short, no spaces pure alphanumeric.
    TC name and wireless name/s should conform. By default the disk share name is data which is fine.
    2. Mavericks has changed over from using AFP to SMB for network filesharing.. why Apple why??
    This is unhelpful to say the least. Many many people are struggling with TC and being unable to mount the network drive.
    So do it manually and force it back to AFP.
    In Finder use top menu, Go, Connect to Server.
    Type AFP://TCname or TCIPaddress (it must be the network name of actual TC.. or its IP address)
    When the computer locates the resource it will ask for a password.. it is public by default.. supply your password or public and save it in the keychain.
    3. Delete the existing TM setup and start over.. See A4 here. http://pondini.org/TM/Troubleshooting.html
    I cannot promise this will fix it but should reduce the problem to now and then.. rather than every time TM needs to backup.

  • I am having problems with Time Machine and having enough space to finish my last back up.

    I am having problems with Time Machine and having enough space to finish my last back up.

    Take a look at this link, http://support.apple.com/kb/HT1427

  • Office Home and Student 2010 Install problems with a Key Code Err..

    I had to install a new hard drive, lost everything..So I upgraded to Windows 7 Professional ..
    I own a the 2010 Home and Student CD bought at the Microsoft store...Doesn't come with Outlook...
    So I ordered the Home and Business 2010 disc with Service Pack 1 Included, this has 2010 outlook ...It loaded and worked fine up to the point I had to replace my Drive with New Windows 7 Pro...
    Everything loaded find, but every time I try and use it, its acts like it is caught in some kind of loop...It keep trying install and configure, then ask for my Key Code every time, sort of like a OLMAP132.Dll err...I did manage to make it work once, I even
    got back the test email from Microsoft after setting up Outlook....Then when I rebooted the system, this same loop action started ...
    I have uninstalled this at least 4 times, searched for anything with ties to Microsoft office, and uninstalled it..Then did a New Clean Install...Still getting this key Code question every time I open up a Office program....So, I am saying without a doubt,
    2010 Office Home and Student and Business WILL NOT RUN on Windows 7 professional ......If you have any idea how to fix this..Please respond with facts on how to repair this please....

    Greta,,,After down loading ( Off Cat ) tools...I saved that program...However, there is another major problem with Your Instructions I ran into...It seems I'm not the trusted source to change files such as the Mapi32.dll files..So I was unable to attempt
    your repair ...However I have found instructions for the task, but it seems very complicated for sure.. Here are the instructions, and I  would like for you and maybe a co-worker to check these.. before I make any changes in system..
    How to Change the Trusted Installer name...
    1. Right Click on the File Or directory.
    2.Click On properties, on the Right Click menu.
    3.Click On "" Security "" tab
    4.Click On " Advanced" Button on the bottom.
    5.In the advance Security Dialog Window, Click on "" Owner "" tab
    6.Here you will able to see the Current Owner ( ie: Trusted Installed )
    7. To take owner ship of the object, click on the Edit button, Give permission to UAC , the highlight the user name in the " Change Owner To" box that you want to assign as the owner for the object. Then Click " OK " to finish the process.
    8.Back in the Advanced Security Settings Window , You will see the current owner has changed to the user you just selected.
    9.Click the ""OK "" and exit this window.
    10. Click "'OK"" again, to exit completely from the Properties window..
    11. Repeat Step 1 to 4 to open the object's Properties Window again...
    12.Back in Object's Properties window, click on the edit button , and confirm the UAC elevation request.
    13. Highlight the Administrators in the " group of users names"" box. If the user ID or group that you want to manage the permissions for the object doesn't exist, Click on.."" Add"" button, and type in the user name or
    group name desired into the "" Enter Object names to select ( can use Everyone as user Name)" box and finish off by clicking on the "" OK""
    14. In the permissions for Administrators box below ( or any other user name or group name you choose). click on ""Full Control"" under the ""Allow"" column to assign full access rights control permission to Administrator's
    group....
    http//windows.microsoft.com/en-us/windows-vista/troubleshoot-access-denied-when opening-files-or-folders.

  • Problem with Time Machine back up

    Hello all,
    Grateful for anyone's help with this issue.
    Firstly, a summary of specs:
    Mac OS X 10.7.
    Late 2007 Macbook 13inch
    External hard drive - LaCie 1TB D2 Quaddra
    Issue - When trying to back up my 2007 Macbook it fails! When I back up my 2011 MacBook Pro (to the same external hard disk) it works fine!
    I have reviewed a whole load of advice on here, some I am able to understand others that I unable too! Sorry! Now stuck so thought I would post on here in the hope sometime might be able to give me some advice.
    I have downloaded a widget which helped me view the error message details (found that advice on the excellent Pondini website).
    The error message was:
    Starting standard backup
    Backing up to: /Volumes/Mike/Backups.backupdb
    Backup content size: 136.3 GB excluded items size: 8.2 GB for volume Macintosh HD
    153.65 GB required (including padding), 465.32 GB available
    Waiting for index to be ready (101)
    Stopping backup.
    Error: (-47) SrcErr:NO Copying /Applications/Address Book.app/Contents/MacOS/Address Book to /Volumes/Mike/Backups.backupdb/Mike surname removed’s MacBook/2012-12-26-120325.inProgress/560DC4C6-DFCE-48AA-B430-457C461AEA0F/Macin tosh HD/Applications/Address Book.app/Contents/MacOS
    Copied 9 files (774 KB) from volume Macintosh HD.
    Copy stage failed with error:11
    Backup failed with error: 11
    To be honest this is pretty much gooblygook to me! But I did try to locate the file that was causing the problem (Address Book) and excluded it from the Time Machine backup, I then received this error message:
    Starting standard backup
    Backing up to: /Volumes/Mike/Backups.backupdb
    Backup content size: 136.3 GB excluded items size: 8.3 GB for volume Macintosh HD
    153.62 GB required (including padding), 465.32 GB available
    Waiting for index to be ready (101)
    Stopping backup.
    Error: (-47) SrcErr:NO Copying /Applications/adidas miCoach Manager.app/Contents/Frameworks/QtCore.framework/Versions/4/QtCore to /Volumes/Mike/Backups.backupdb/Mike surname removed’s MacBook/2012-12-26-120325.inProgress/65EE1FE8-D548-4CAD-AEC7-9B6A4C12FAD9/Macin tosh HD/Applications/adidas miCoach Manager.app/Contents/Frameworks/QtCore.framework/Versions/4
    Copied 12 files (2.7 MB) from volume Macintosh HD.
    Copy stage failed with error:11
    Backup failed with error: 11
    So I then excluded miCoach, but it failed again! This time with this message:
    Starting standard backup
    Backing up to: /Volumes/Mike/Backups.backupdb
    Backup content size: 136.3 GB excluded items size: 8.3 GB for volume Macintosh HD
    153.59 GB required (including padding), 465.32 GB available
    Waiting for index to be ready (101)
    Stopping backup.
    Error: (-47) SrcErr:NO Copying /Applications/Adobe Flash Player 9/Install Flash Player 9 UB.app/Contents/InstallerData/Installer.data to /Volumes/Mike/Backups.backupdb/Mike surname removed’s MacBook/2012-12-26-120325.inProgress/B7A9D12A-B391-4AD7-907D-01828917DF39/Macin tosh HD/Applications/Adobe Flash Player 9/Install Flash Player 9 UB.app/Contents/InstallerData
    So I excluded Adobe Flash Player, and....failed again, this time blaming the Calculator
    Starting standard backup
    Backing up to: /Volumes/Mike/Backups.backupdb
    Backup content size: 136.3 GB excluded items size: 8.3 GB for volume Macintosh HD
    153.59 GB required (including padding), 465.32 GB available
    Waiting for index to be ready (100)
    Stopping backup.
    Error: (-47) SrcErr:NO Copying /Applications/Calculator.app/Contents/Resources/Calculator.icns to /Volumes/Mike/Backups.backupdb/Mike surname removed’s MacBook/2012-12-26-120325.inProgress/60CC7EAA-FCE7-4FC3-B946-8B999E574797/Macin tosh HD/Applications/Calculator.app/Contents/Resources
    Copied 2760 files (27.1 MB) from volume Macintosh HD.
    Copy stage failed with error:11
    Backup failed with error: 11
    The way this is going I will not have any information left to back up!!
    Any advice warmly received.
    Merry Christmas

    miketangokilo wrote:
    Error: (-47) SrcErr:NO Copying /Library/Application Support/GarageBand/Instrument Library/Sampler/Sampler Files/Steel String Acoustic Guitar/50B-1GA1-B2.aif to /Volumes/Mike/Backups.backupdb/Mike Surname removed’s MacBook/2012-12-26-120325.inProgress/8614198B-1C54-4CF1-8C24-DDD9692FB82C/Macin tosh HD/Library/Application Support/GarageBand/Instrument Library/Sampler/Sampler Files/Steel String Acoustic Guitar
    We don't know exactly what error (-47) means.  Apple used to publish lists of error code, many years ago, before OSX, but very few now.  It's clearly something to do with the file named, but just what isn't clear. 
    But we do know that SrcErr:NO means the error is not on the "source" -- ie, your Mac.  It seems to be a problem writing the file to the TM drive. 
    So first, if you haven't yet, run Repair Disk on that TM partition, just to be sure it's ok.
    Also, be sure the disk has either the GUID (preferred) or APM partition map scheme.  Click the top line in Disk Utility's sidebar, and that will be shown at the lower right.  If it's MBR (Master Boot Record), that's a Windows setup, and sometimes doesn't work well with Time Machine, especially if there are multiple partitions.
    Prior to OSX, error -47 meant the file was busy.  If that's still true, something may be trying to access it while it's being written.  If you're running any anti-virus apps on that Mac, or anything else that might be looking at the backup drive, exclude the TM drive from it, or, better, turn it off.  Antivirus apps can interfere with TM backups -- some can even damage them.

  • FCP XML to Flint - Problems with Time Remap

    My Flint artist and I have had some problems with the XML Export and Import that we cannot figure out. The XMLs from FCP sequences that have variable speed Time Remaps applied show up on the Flint with those particular clips with the wrong in/out points in both the source and record times. Also, the speed ramp info doesn't show up properly.
    We have followed the Flint manual to a T on importing correctly. Anyone encountered this or know a solution? Especially why it's throwing off the in points. It screws the whole timeline when that happens.
    Thanks in advance.

    The TimerEvent target is a flash.utils.Timer object and does
    not contain a reference to your lblTimeUntil label.
    Recode
    trace("Seconds Left" + evt.target.lblTimeUntil.text);
    to
    trace("Seconds Left" + lblTimeUntil.text);
    and you will not blow up anymore.
    This code will display the count up till refresh.
    public function onTick(evt:TimerEvent):void {
    var minuteTimer:Timer = evt.target as Timer;
    lblTimeUntil.text = minuteTimer.currentCount.toString();

Maybe you are looking for

  • How to upgrade RMAN package RMAN.DBMS_RCVCAT ? Thank

    $ rman target / catalog rman/rman@infra Recovery Manager: Release 10.2.0.1.0 - Production on Wed Nov 29 15:45:10 2006 Copyright (c) 1982, 2005, Oracle. All rights reserved. connected to target database: TRAN7 (DBID=3923896548) connected to recovery c

  • Quicktime opening all the last files

    When i double-click some file that i want to open with quicktime, it opens all ealier files. how can i switch it off so it will open the only one i want to watch ?

  • Can't open free trial page

    Hey all, I have a Mac and I am currently trying to download the free trial of After Effects. Unfortunately every time I click on it, my web browser says it can't open it. I attached a picture below. I've tried other web browsers and also trying to tu

  • Iphone 4 restarts continuously

    I have an iPhone4 bought in UK and recently i have updated iOS 6 version, it worked for few days and later it started rebooting continuously. When i connect to power, i get a display with connect to itunes and when i connect the phone to laptop, it k

  • DI - Setting UDF values

    (PL4, SP01) A couple of questions - 1) Is there example code for working with UDFs through the DI? 2) Does anyone have code for working with UDF enumerations? (I prefer vb.net but will take anything!) (example of what I want to do...) Dim en As IEnum