Problems converting / importing PSE9 catalog into LR4

Im having problems converting / importing my PSE 9 photos into LR4. I went through the "File / Upgrade PS..." without success. It seems to work...ie LR4 closes down and then creates a new catalog but then a box appears saying that the photos could not be imported because they are missing or damaged. I then thought that my PSE 9 catalog is not set up right BUT LR4 tell me that the 27023 photos could not be imported for the reason stated. In other words LR does see the PSE catalog because it give the correct amount of photo's. I then did a small test by dragging some photos from my PSE 9 into LR4 and that seems to work. All the keyword tags move across. Is there a problem or dont I understand the process?

If I remember properly, it will not be an onerous task. What Exiftool will do is transfer the notes to some other metadata field that LR uses ... and I believe it can be done as a batch job, thus one execution of Exiftool does this for your entire photo collection (assuming its all under one parent folder).
Here is the method (see post #12 in this thread): http://forums.adobe.com/message/2148552#2148552

Similar Messages

Importing LR3 catalogs into LR4

What's the quickest way of creating new catalogs for LR4. I have over 30 active cats for each client.

Probably via File> Open Catalog in LR4 Brian. You'll be prompted to upgrade the catalog. This moves the LR3 Previews to LR4 too.

Elements 10 catalog into LR4

I lose all "Notes" entries on importing an Elements 10 catalog into LR4. Can I retrieve them in LR4?

If I remember properly, it will not be an onerous task. What Exiftool will do is transfer the notes to some other metadata field that LR uses ... and I believe it can be done as a batch job, thus one execution of Exiftool does this for your entire photo collection (assuming its all under one parent folder).
Here is the method (see post #12 in this thread): http://forums.adobe.com/message/2148552#2148552

Problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007

Gentlemen,
I have a problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007,
My current Support Package Level is:
SAP_ABA      700     0015
SAP_BASIS     700     0015
PI_BASIS      2006_1_700     0006
ST-PI     2005_1_700     0006
CRMUIF         600     0003
SAP_BW      700     0017
SAP_AP                700     0012
BBPCRM                600     0002
First I had the following error:
   Syslog: k CQ3 : UMGSETTING&                                          rscpexcc 12
   GetDBMigrateCodePagesLangs uses TCP0D, TCPDB, TCP0C.
     0 entries from FUNCT (%/SAPCND/CNF_GET_RECORD_FROM_DB%) deleted.
     0 d /   0 i /   0 u /   6 = 100% ucf FUPARAREF
     6 entries for FUPARAREF imported (/SAPCND/CNF_GET_RECORD_FROM_DBA*).
     0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
     0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
     0 d /   0 i /   0 u /   1 = 100% ucf TFTIT
     1 entry for TFTIT imported (D/SAPCND/CNF_GET_RECORD_FROM_DB*).
   successfully set a temporary lock on table REPOSRC
   REPOS /SAPCND/LDETERMINATION$14                A replaced.
   REPOS /SAPCND/LDETERMINATIONU14                A replaced.
    [dev trc     ,00000] Wed Nov 26 16:33:14 2008                         1315447 8.171484
    [dbdsoci.    ,00000] *** ERROR => invalid offset 0 for placeholder 16
                                                                                71 8.171555
   unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,
   dsql_open returned with unexpected error code 2
   Please contact the SAP support.
   End of Transport (0016).
   date&time: 26.11.2008 - 16:33:14
   5 warnings occured.
   3 errors occured.
   Main import
   End date and time : 20081126163314
   Ended with return code: ===> 16 <===
After I got this error I upgraded the Kernel from patch level 159 to 179,
After that I restarted the update again but the system is still running on u201CIMPORT_PROPERu201D and dose not given any update,
From Import logs of the queue I can see the following,
   Summary:
    24 DOCUT imported.
    16 DYNPS imported.
    30 DYNPT imported.
   387 REPOS imported.
    43 REPOT imported.
   Totally 505 Objects imported.
   Totally 3636 tabentries deleted.
   Totally 14 objects activated.
   Totally 12229 tabentries imported.
   62066888 bytes modified in database.
    [dev trc     ,00000] Wed Nov 26 18:14:19 2008                         20996974 40.917838
    [dev trc     ,00000] Disconnecting from ALL connections:                   30 40.917868
    [dev trc     ,00000] Disconnecting from connection 0 ...                  287 40.918155
    [dev trc     ,00000] Closing user session (con_hdl=0,svchp=00000000003005B8,usrhp=00000000002FB748)
                                                                              5759 40.923914
    [dev trc     ,00000] Detaching from DB Server (con_hdl=0,svchp=00000000003005B8,srvhp=00000000061530E8)
                                                                                921 40.924835
    [dev trc     ,00000] Now I'm disconnected from ORACLE                    8230 40.933065
    [dev trc     ,00000] Disconnected from connection 0                        90 40.933155
    [dev trc     ,00000] statistics db_con_commit (com_total=527, com_tx=307)
                                                                                59 40.933214
    [dev trc     ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0)
                                                                                52 40.933266
   Disconnected from database.
   End of Transport (0004).
   date&time: 26.11.2008 - 18:14:19
   2 warnings occured.
   Main import
   End date and time : 20081126181419
   Ended with return code: ===> 4 <===
Please advice me.
Regards,
Ahmed

I have similar problem while updating support packages in SAP R/3 4.6C environment.
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
Here is an outline of series of events that happened:-
We are applying in support packages in SAP R/3 4.6C HR Development
(TFI) environment. We planned with installing all the SP stacks
starting from 1 to 9.
-Updated kernel, tp , r3trans and SPAM level to latest level.
We received the following error in Import_Proper step of Support
package upgrade. Though the step has been repeated after making sure
that we have all the required files at OS level, we go this error
repeatedly.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Main import
End date and time : 20081205192603
Ended with return code: ===> 16 <===
When we renamed Co-File & data_file at OS level to see if the files are
created again and reran we got the following error.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.24 46D
Main import
End date and time : 20081205185117
Ended with return code: ===> 12 <===
We tried importing the individual support package SAPKB46C52 from STMS
and the transport cancelled at an earlier step with the same error.
Dictionary import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Dictionary import
End date and time : 20081205195929
Ended with return code: ===> 16 <===
While playing around I have deleted the transport from the tp buffer
and added manually, before doing so I made a backup of tp buffer at OS
level and I got following error though I reverted back to backed-up
copy.
- Error in phase: IMPORT_PROPER
- Reason for error: TP_BUFFER_INCONSISTENCY
- Return code: 0008
- Error message: Wrong sequence of Packages in the tp buffer (e.g.
SAPKB46C52 )
I then tried to disassemble the package separately and reran the
import queue. Now I have RC 8 on that support package.
When I did R3trans -l on the datafile it completed successfully.
D:\>R3trans -l \usr\sap\trans\data\RB46C52.SAP
This is R3trans version 6.05 (release 46D - 27.10.08 - 16:32:00).
R3trans finished (0000).
I verified the size of file "CSR0120031469_0023301.PAT" and it is the
same as mentioned in SSP.
Let us know is there is a workaround.

Problem converting pse 6 catalog to pse 7

I am a longtime pse user, I started with Album. I have photos from a trip that I had in pse 6 on my laptop that I want to get into pse 7 on my desktop. I have not found a lossless way to merge catalogs in pse so I have three catalogs. I successfully converted my desktop catalog from pse 5 to pse 7 with no problems. I backed up two catalogs under pse 6 on my laptop and restored them to my desktop system. I tried to covert each one but the conversion failed. I found that I had two eSATA drives with the same volume ID so I backed up my desktop catalog (the photos resided on one of the drives) and reformatted one drive. Pse was still confused so I reformatted the other drive as well. Pse 7 now runs fine for my former pse 5 desktop catalog which I’ll call catalog A. I restored the first of my pse laptop catalogs, I’ll call it catalog B, and after multiple attempts got it to convert by restoring it with pse 7, the automatic conversion after the restore was successful. I did the same with the remaining pse 6 backup file, call it catalog C, restoring it with pse 7 but the conversion failed. I did catalog repair but it found no errors, did ‘repair anyway’. Convert failed again. I optimized it, convert failed again. I checked the convert log and it says the catalog copy failed. The log showed that pse tried to copy the catalog to the location of my photos for catalog A to a file named the same as my catalog C name. The last line in the log is - caught exception "catalog copy failed". This implies to me that it never got far enough to encounter a ‘poison file’.
I have run out of ideas and any help would be appreciated. My last choice option is to use ‘get photos’ to get the catalog C photos into catalog B to get everything running under pse 7 rather than under multiple products.
I am going to make another forum entry but it may matter here that the catalogs of catalog B and C are in the same directories that I restored their photos to and are only found when I ask to find ‘custom location’ directories. The psedbtool program never sees them.

I created a new folder ‘Black Sea and Spitsbergen CATALOG’ and moved the catalog and thumbnail files to it. Pse 6 opened it and displayed the thumbnails faster than usual. When I do the catalog option Black Sea and Spitsbergen CATALOG shows as the current catalog. I did the reconnect all missing files and got the no missing files message. Did the repair catalog and got the no errors message did repair anyway. No errors found, I did the reconnect again, no missing files. I closed pse 6. Opened pse 7 file>catalog>convert>find more catalogs and pointed to the folder ‘Black Sea and Spitsbergen CATALOG’.
Pse found the catalog, I highlighted it and clicked on convert. I got the conversion completed successfully message! Clicked OK>done>open and the converted catalog opens. Catalog manager now shows both catalogs under the Custom Location radio button, fantastic! I did a reconnect and got the no missing files message.
Ok; so I think I learned the following:
1)      The current catalog name is determined by the name of the folder it resides in.
2)      The catalog and thumbnail files need to be in the same folder.
3)      It works better if the catalog and thumbnail files are in a separate folder from the pictures. I suspect performance is improved because it finds the thumbnail file faster; I have 21,000 photos in the catalog.
I suspect this could also solve my catalog move problem because pse may be moving the contents of the folder where the catalog resides. I am going to try it, will post the result under that discussion.
If you would be kind enough to confirm the above three points I would appreciate it. I will keep this open for your reply.
Thank you again, it seems simple now that I understand a bit more, thanks for your time and for sharing your knowledge.

Problem to import wmv files into imovie 08

I have big problems to import my wmv files into imovie on my brand new imac24"
have installed flipmac pro , and they can not help me on help desk.
I have also upgraded Quicktime to Pro.
Files look grey so can not highlight .
Trieed to open in Qicktime and save as Mov. Stil could not have Imovie accept it when i draged or tried to import
Flipmac suggested i also download imovie 0.6 but cant find it on apples support page. only 06 updates.
Any one who can help?
opb

have installed flipmac pro
Do you have the latest Flip4Mac update installed with the QT 7.2 fix?
Trieed to open in Qicktime and save as Mov.
The "Save As..." QT Pro File menu option only places the current audio and video compressed data in an MOV file container. It does not re-compress the data to a fully support QT compression format. Try converting the file to DV, MJPEG, H.264, etc. instead.
Stil could not have Imovie accept it when i draged or tried to import
Use the "Import Movie File" to "Move" a copy of your file into iMovie '08.
Flipmac suggested i also download imovie 0.6 but cant find it on apples support page.
iMovie HD v6.0.4 download for iMovie '08 purchasers

Import Elements catalog into Lightroom

Hi everybody,
I used PSE on my notebook for a couple of years now. As i bougth a new pc recently I want to upgrade to Photoshop CC / Lightroom. So here is my question:
Is it possible to import my elements catalog into Lightroom including my tags?
I still have got my copy of Elements 11 installed on my notebook, I´ve got a trial copy of PSE 13 on my new pc and already imported my catalog. I also installed Lightroom 5.6 on the pc.
I already looked on the internet but I only found one video which shows the solution I need but on Lightroom 3 and the function used in the video isn´t avalible in 5.6 any more.
If you need any more information please feel free to ask.
Greatings from Germany
Sebastian

Roy, I am 99% certain that importing PSE 7 catalog to LR 2 is not possible at this time. The release cycles of the products did not coincide for that to happen. However you can import from PSE 6 I believe.
I feel sure that this will be addressed soon........... but don't know when.

Problem with importing scanned photos into iPhoto

I have an Epson scanner that scans photos into the JPEG format. However, when I try to import these photos into iPhoto I am told that the file format is incompatible with iPhoto. This is odd since photos in iPhoto ARE in JPEG format.
Can anybody help?
Many thanks in advance for any assistance.
Sir Leicester

Did you scan these photos as grayscale b/w photos? If so that's the reason. iPhoto does not support the grayscale mode when it has the *+Dot Gain 20%+* profile added to it and that's what scanners use.
Rescan all b/w images as color and they will be accepted by iPhoto. Or you can download the Automator workflow application, Convert to JPG and Embed sRGB profile, from Toad's Cellar and drop the files onto the application. This will batch convert them to jpegs in the RGB mode with the sRGB IEC61966-2.1 color profile.
OT

How do I Import PSE12 Catalog into Lightroom 4.4

New to Lightroom and I have version 4.4. I have Photoshop Elements 12 installed and I'm trying to import the catalog to Lightroom. I manage this quite easily with a trial version of Lightroom 5 but in 4.4 if I go to File/Import Photos and Videos or Import from another Catalog there is no option to import from the installed PSE12. So how do do it.

Albums will not transfer via this method of writing metadata to files, because album metadata is never written to files.
The only way to transfer albums is by converting them to keywords, as 99jon said, or by waiting until Adobe releases a new version of Lightroom that will properly convert PSE12 catalogs to Lightroom catalogs (and neither I nor anyone else here knows when that will be).
As a supplement to 99jon's advice, it is my opinion that you should organize via PSE tags (called keywords in Lightroom), and then you won't have this issue of transferring information from album names to keywords in PSE and then back to collection in Lightroom. Tags/keywords are written to the metadata when you inform PSE or Lightroom to do so, and so if you convert the PSE albums names to PSE tags you should just leave them as tags in the future, and leave the information as keywords in Lightroom in the future. In my opinion, there is zero benefit and considerable drawbacks (mainly your time) converting these to keywords to collections in Lightroom. And if you're going to leave these as keywords in Lightroom, then there's also zero benefit and considerable drawbacks to making the PSE tag name "Album New York", just make it "New York".

Problem while importing the wsdl into Dynpro ?

HI Guys,
I have developed a webservice within xi in the integration directory and while importing this wsdl into webdynpro i am getting the following error
!ENTRY com.sap.ide.ws.proxygenerator 4 -1 Okt 10, 2007 19:02:23.788
!MESSAGE com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. Problem with WSDL file parsing. See nested message.
!STACK 0
com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. Problem with WSDL file parsing. See nested message.
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.getDefaultSchemaMapping(ProxyGenerator.java:110)
at com.sap.ide.ws.proxygenerator.ProxyHelperFunctions.createNamespacePackageMappingFile(ProxyHelperFunctions.java:103)
at com.sap.ide.ws.proxygenerator.ProxyHelperFunctions.createNamespacePackageMappingFile(ProxyHelperFunctions.java:86)
at com.sap.ide.ws.proxygenerator.ProxyHelperFunctions.createNamespacePackageMappingFile(ProxyHelperFunctions.java:82)
at com.sap.ide.wsproxy.wizards.prx.pages.NamespacePackageMappingPage$1.run(NamespacePackageMappingPage.java:114)
at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:302)
at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:252)
at org.eclipse.jface.dialogs.ProgressMonitorDialog.run(ProgressMonitorDialog.java:357)
at com.sap.ide.wsproxy.wizards.prx.pages.NamespacePackageMappingPage.initTable(NamespacePackageMappingPage.java:170)
at com.sap.ide.wsproxy.wizards.prx.pages.NamespacePackageMappingPage.setVisible(NamespacePackageMappingPage.java:295)
at org.eclipse.jface.wizard.WizardDialog.updateForPage(WizardDialog.java:959)
at org.eclipse.jface.wizard.WizardDialog.access$1(WizardDialog.java:940)
at org.eclipse.jface.wizard.WizardDialog$3.run(WizardDialog.java:929)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at org.eclipse.jface.wizard.WizardDialog.showPage(WizardDialog.java:927)
at org.eclipse.jface.wizard.WizardDialog.nextPressed(WizardDialog.java:684)
at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelDialog.nextPressed(ModelDialog.java:218)
at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:316)
at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
at org.eclipse.jface.window.Window.open(Window.java:563)
at com.sap.ide.webdynpro.modeleditor.ModelEditorCallback.createModel(ModelEditorCallback.java:52)
at com.sap.ide.webdynpro.service.modeleditor.ModelService.createModelWithUI(ModelService.java:70)
at com.sap.ide.webdynpro.service.modeleditor.ServiceWithUI.createModel(ServiceWithUI.java:49)
at com.sap.ide.webdynpro.tsmodel.application.provider.ModelNodeProvider.createUniqueName(ModelNodeProvider.java:55)
at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntityUin(EntityImpl.java:936)
at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntity(EntityImpl.java:502)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.runInternal(CreationAction.java:76)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.access$000(CreationAction.java:24)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction$1.run(CreationAction.java:51)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.run(CreationAction.java:57)
at com.sap.ide.webdynpro.projectbrowser.actions.PBCreateModelAction.run(PBCreateModelAction.java:95)
at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:224)
at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1407)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: com.sap.engine.lib.xml.util.NestedException: Parser exception occurred:Fatal Error: com.sap.engine.lib.xml.parser.ParserException: = expected in attlist(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row:3, col:992) -> com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: = expected in attlist(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row:3, col:992)(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row=3, col=992) -> com.sap.engine.lib.xml.parser.ParserException: = expected in attlist(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row:3, col:992)
at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadDOMDocument(WSDLDOMLoader.java:1032)
at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadWSDLDocument(WSDLDOMLoader.java:1125)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.getDefaultSchemaMapping(ProxyGenerator.java:107)
... 63 more
Caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: = expected in attlist(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row:3, col:992)(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row=3, col=992) -> com.sap.engine.lib.xml.parser.ParserException: = expected in attlist(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row:3, col:992)
at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:139)
at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadDOMDocument(WSDLDOMLoader.java:1022)
... 65 more
Caused by: com.sap.engine.lib.xml.parser.ParserException: = expected in attlist(C:\Paymetric Transfer\PaymentAuthorisationcard.wsdl, row:3, col:992)
at com.sap.engine.lib.xml.parser.XMLParser.scanAttList(XMLParser.java:1565)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1710)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2440)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1841)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2440)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1841)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2440)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1841)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2440)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1841)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2440)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1841)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2843)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:229)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:204)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:263)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342)
at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:101)
... 67 more
any help would be appreciated
Thanks,
srini

Hi,
If the import fails with the message that certain instances of the CIM class SAP_AssociatedContext were not imported, repeat the import. These errors are caused by an incorrect sort order in the export file. When starting the import again ignore the warning that data already exists. Choose Import anyway.
Also go through this Document.
http://help.sap.com/bp_bpmv130/Documentation/Operation/SystemContentCopy.pdf
Regards,
Akshay Jamgaonkar.
Reward points if find useful.

How to import complete catalog into another existing catalog

Hi,
Lightroom 2.2
Win XP SP2
3GB RAM
I have LR 2.2 installed with about 10000 images on my computer at home. I've been on holiday at my parents' and have downloaded & installed an evaluation version of LR 2.2 on their computer on which I created a new catalog. In the meantime I've imported and processed about 350 images on their computer.
Before going home I'd like to export the catalog with all photos, metadata, keywords, etc. onto a jump drive. Then, when I get home, I'd like to import all of these images & data into my existing catalog.
I've researched this a bit, and it seems to be a straight-forward operation if only the images and a certain subset of the metadata is to be imported. However, I'd like _everything_ to be imported. Anybody have experience doing this?
Thanks,
Jens

This will work perfectly. Just select all the images you want to transfer and under the file menu, select export as catalog. Be sure to check the option to export the negative files. I'd export this catalog onto the computer its on, and then copy the exported catalog to your jump drive - depending on the size of your originals and preview, the catalog might be quite large.
When you get home, I'd transfer the catalog from your jump drive onto your computer. Then start LR and under the File menu select import from catalog. It will ask where you want to put the negative (original) files, and then it will import them without a hitch. I've done this several times with never a problam.

Problem with importing premiere project into after effects

Hi. When I import premiere project into after effects CS4 the files I speed up 2x (for example) look likes on the snapshot below, and they are not in the correct places.
what can I do?

Then don't speed them up... This is "as designed". AE and Premiere are not compatible in their tiem-remapping/ time-stretching, so tehre is no way to move between them without losing that info.
Mylenium

Problem importing a catalog into CQ5 from Hybris

Hello
I'd like to ask you guys for some help on CQ imports. CQ supports a number of different importers. The one I am dealing with is the Hybris Importer.
I already installed the Hybris embedded server and all relevant packages listed in the CQ docs (cq-5.5.0). I can log into Hybris and view/update the catalogs. However, when I attempt to import an existing catalog from a base Hybris site into CQ, the process fails:
=======
   1. When I import into the "outdoors" site in CQ, the process starts OK, but then appears to copy only four items:
A /etc/commerce/products/outdoors/outdoors/en
A /content/dam/geometrixx-outdoors/products/import/96392-Brazzaville
A /etc/commerce/products/outdoors/outdoors/en/equipment/swimming/96392/96392.1-S/image
A /content/dam/geometrixx-outdoors/products/import/96392-Brazzaville
A /etc/commerce/products/outdoors/outdoors/en/equipment/swimming/96392/96392.2-S/image Catalog imported successfully in 9785 milliseconds
   2. When I import into a new site that does not have the same structure as the Geometrixx Outdoors site, I get
A /etc/commerce/products/outdoors/outdoors/en
E Touching containing page failed: /content/Geo-4/en_US/men E Touching containing page failed: /content/Geo-4/en_US/men/shirts E Touching containing page failed: /content/Geo-4/en_US/men/shorts
E Touching containing page failed: /content/Geo-4/en_US/men/pants
E Touching containing page failed: /content/Geo-4/en_US/men/coats
E Touching containing page failed: /content/Geo-4/en_US/women
E Touching containing page failed: /content/Geo-4/en_US/women/shirts_0
E Touching containing page failed: /content/Geo-4/en_US/women/shorts_0
E Touching containing page failed: /content/Geo-4/en_US/women/pants_0
E Touching containing page failed: /content/Geo-4/en_US/women/coats_0
E Touching containing page failed: /content/Geo-4/en_US/equipment
E Touching containing page failed: /content/Geo-4/en_US/equipment/hiking
   3. Looking at the /author/crx-quickstart/logs/error.log, I see:
.... POST /libs/commerce/content/import.html HTTP/1.1] com.adobe.cq.commerce.hybris.impl.HybrisConnectionImpl execute: received response from hybris in [25ms] with status [200]
.... POST /libs/commerce/content/import.html HTTP/1.1] com.adobe.cq.commerce.hybris.impl.HybrisConnectionImpl execute: sending command [GetProductCommand] to hybris: [https://localhost:9002/ws410/rest/catalogs/outdoors/catalogversions/Staged/products/94357. 1-XL?variantproduct_attributes=picture%2Csummary%2CvariantProduct%2CpriceRow%2CvariantAttribute%2Cdescription%2Cname%2CbaseProduct%2Ccode%2Ceurope1Prices]
.... POST /libs/commerce/content/import.html HTTP/1.1] com.adobe.cq.commerce.hybris.impl.HybrisConnectionImpl execute: received response from hybris in [24ms] with status [200]
.... POST /libs/commerce/content/import.html HTTP/1.1] com.adobe.cq.commerce.hybris.impl.HybrisConnectionImpl execute: sending command [GetProductCommand] to hybris: [https://localhost:9002/ws410/rest/catalogs/outdoors/catalogversions/Staged/products/94357. 1-XXL?variantproduct_attributes=picture%2Csummary%2CvariantProduct%2CpriceRow%2CvariantAtt ribute%2Cdescription%2Cname%2CbaseProduct%2Ccode%2Ceurope1Prices]
.... com.adobe.cq.commerce.hybris.internal.HybrisController.hybris ERROR [hybrisHTTP7] [DefaultWsUtilService] Attribute Selector API: Dynamically configured attribute: "variantProduct" is not recognized for node: "de.hybris.platform.variants.dto.VariantProductDTO" that was matched using qualifier: "variantProduct" at level: 0
.... com.adobe.cq.commerce.hybris.internal.HybrisController.hybris ERROR [hybrisHTTP7] [DefaultWsUtilService] Attribute Selector API: Dynamically configured attribute: "priceRow" is not recognizedfor node: "de.hybris.platform.variants.dto.VariantProductDTO" that was matched using qualifier: "variantProduct" at level: 0
.... com.adobe.cq.commerce.hybris.internal.HybrisController.hybris ERROR [hybrisHTTP7] [DefaultWsUtilService] Attribute Selector API: Dynamically configured attribute: "variantAttribute" is not recognized for node: "de.hybris.platform.variants.dto.VariantProductDTO" that was matched using qualifier: "variantProduct" at level: 0
... - the above messages repeat several times for variantProduct, priceRow, and variantAttribute
================
So, the questions I have are:
   1. Do I need to configure anything before the import?
   2. Does the site in CQ we import to need to have a specific structure before we trigger the import? The Geometrixx Outdoors site has several chapters - men, women, equipment, etc.
   3. Any additional suggestions or pointers you may have regarding the import process.
Thanks in advance for your help.

Houston,
You have to tell LR what you want to do with photos already existing in your catalog:
Beat

Problems when importing multiple files into key frames

I'm creating an interactive flash application that uses hundreds of individual renders from a 3d modelling app. The image file size is 800 x 600. Each sequence that i import to the stage is around 120 images and each gets put into a separate key frame. The problem is, often when I import batches of files into flash the program crashes and stops responding. The problem gets worse after each succesful import ie. after importing the first lot of files, its unlikely that the second lot of files will import.
Interestingly, I dont have this problem on my pc. So I can do all the importing on my pc, but when I try and compile the swf file my pc does not create a file and sometimes crashes. So I am having to import on my pc and compile the swf on my mac.
Anyone else having similar problems? is there a better way of going about this?

flash is limited to 16,000 frames.
use several swfs and load them into a main swf.

Problem when import software component into integration

Hi all:
Could you please help me with the following problem?
I crated some software component in SLD. Then I tried to import it into integration builder design
through tools ---> transfer from SLD --->
import software component Versions, the system prompted
me that cann't access Ecc0101:500000(on which PI is installed).
Could you please tell me the possible reason why
such an error happen ? or how to trace the problem ?
is it regarding message server or something else?
Thanks in advance !

Hi,
you should check your SLD connection:
http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/frameset.htm
Regards
Patrick

Problems converting / importing PSE9 catalog into LR4

Similar Messages

Maybe you are looking for