Problems doing roundtrip from LR to PS

When I edit a picture in LR5 and then edit in PS2014 and save the picture, when I go back to LR5 the PS edits are not there. Any ideas why not? Thanks!

Did you flatten the Photoshop document before you saved it as a tiff you can save it as a jpeg for jpeg has no layers like lightroom. Lightroom is not an image editor with layer support it can do flat tiff and jpeg .

Similar Messages

Problem doing insert from one schema to another

Hi all;
I have table test on schema A, and i want to create a trigger TEST_TRIG on table test, the trigger must insert data into a table X, and Y in schema B,
when i create the trigger in Aqua i got
Warnings: --->
W (1): Warning: execution completed with warning
<---
0 record(s) affected
and doing an insert on table A gives the following
ORA-04098: trigger 'A.TEST_TRIG' is invalid and failed re-validation
the trigger is
CREATE OR REPLACE TRIGGER A.TEST_TRIG
AFTER INSERT OR UPDATE OR DELETE ON A.TEST
FOR EACH ROW
DECLARE
l_auditId NUMBER(10,0);
l_auditAction VARCHAR2(1);
l_auditPK VARCHAR2(100) := :NEW.FEILD_A;
l_logInserted BOOLEAN := FALSE;
PROCEDURE auditLog
( p_column IN VARCHAR2,
p_oldval IN VARCHAR2,
p_newval IN VARCHAR2 ) IS
BEGIN
IF NOT l_logInserted THEN
INSERT INTO B.X
( auditId, auditTable, auditPK, auditAction, auditUser, auditDate )
VALUES
( B.AUDIT_LOG_SEQ.NEXTVAL,'TEST',l_auditPK,l_auditAction,'test',SYSDATE )
RETURNING auditId INTO l_auditId;
l_logInserted := TRUE;
END IF;
INSERT INTO B.Y
( auditId, auditColumn, valueOld, valueNew )
VALUES
( l_auditId, p_column, p_oldval, p_newval );
END auditLog;
BEGIN
IF INSERTING THEN
l_auditAction := 'I';
ELSIF UPDATING THEN
l_auditAction := 'U';
ELSIF DELETING THEN
l_auditAction := 'D';
l_auditPK := :OLD.FEILD_A;
END IF;
IF :NEW.FEILD_A != :OLD.FEILD_A
OR (:NEW.FEILD_A IS NULL AND :OLD.FEILD_A IS NOT NULL)
OR (:NEW.FEILD_A IS NOT NULL AND :OLD.FEILD_A IS NULL)
THEN
auditLog('FEILD_A',:OLD.FEILD_A,:NEW.FEILD_A);
END IF;
IF :NEW.FEILD_B != :OLD.FEILD_B
OR (:NEW.FEILD_B IS NULL AND :OLD.FEILD_B IS NOT NULL)
OR (:NEW.FEILD_B IS NOT NULL AND :OLD.FEILD_B IS NULL)
THEN
auditLog('FEILD_B',:OLD.FEILD_B,:NEW.FEILD_B);
END IF;
END;
GO

doing select * from user_errors where name = 'TEST_TRIG' returns nothing to me.
i think there is some privilege problem cause if i create tables x and y inside schema A everything works perfectly. Any suggestion

Problem doing stuff from a thread

Hey ja'll,
Hope you all can take time away from kayman's thread to hook my up with some help on this one...
I am pulling data off of a series of databases. I start a thread for each database i pull from. Each thread calls my Database class which loads the correct driver and returns the connection.
My problems occurs when one of the databases is down. Its seems to get hung on
DriverManager.getConnection
(which i am doing in my database class)
until it figures out that it is not going to get a connection. All the the other threads DO NOT go on thier merry way, they wait for the retard database to error and return untill they try to get connections to thier databases.
Is their any way that I can make them not wait?

Each thread calls my Database class...A static method, right? And is it synchronized? If so, then that's your problem right there. But if it isn't synchronized, then perhaps it's calling something that is.

I can't get my iPad to find my Apple TV. Where do I find the rectangle with the triangle in it to turn on the tv link. I have no problem doing this from my macbookpro.

I can't get my ipad4 to find my Apple TV box, I where do I find the little rectangle box with a triangle in it that I click on my MacBook Pro to turn on the appletv?

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

On my new iMac, mail has no sound after waking from sleep. If I select do not wake for network access in general preferences, the problem does not occur. Anyone have an idea on how to fix this?

On my new iMac, mail has no sound after waking from sleep. If I select do not wake for network access in general preferences, the problem does not occur. Anyone have an idea on how to fix this? Thanks --

Same here on an older iMac since Lion. Thanks for the uncheck wake for network access tip though, it doesn't do it either in that case, I will leave it that way.

I just downloaded the new itunes update, now I can't copying TV shows purchased from the library to my backup computer, it says the files are invisible. Never had any problem doing it until the update.

I just downloaded the new itunes update, now I can't copying TV shows purchased from the library to my backup computer, it says the files are invisible. Never had any problem doing it until the update. I have a Mac Pro G5 OS 10.6.8. The desktop hidden files app doesn't reveal the TV shows.

found a solution in a different discussion.. thank god.

TS1717 When I attempt to upload from a CD I get a box with a red X that says new itunes library. What do I have to do to correct this. I have never had a problem doing this.

When I attempt to upload from a CD I get a box with a red X that says new itunes library. What do I have to do to correct this? I have never had a problem doing this.

Hey the1stpotada,
I would take a look at the recommended steps in this article and run through them to see if they help resolve the issue. Some of the steps may be slightly different depending on what operating system you're using:
iTunes for Windows XP: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
http://support.apple.com/kb/HT1866
Best,
Delgadoh

Does upgrading from Premiere Elements 12 to 13 solve the Organizer thumbnail problem?

Thumbnails do not show up after importing clips into Premiere Elements 12 Organizer. I've tried right clicking on a clip and telling it to recreate the thumbnail but it doesn't work. I've tried refreshing and repairing the catalog. I've even started a new catalog and reimported the files. The system says it's creating thumbnails but they still do not show up. Does upgrading from Premiere Elements 12 to 13 solve the Organizer thumbnail problem?

listiak
That is one of those questions best answered by evaluating Elements Organizer13 with your specific files in your specific computer environment.
Each of the Elements Organizer versions often appears to carry along its own baggage.
One of the things that came up about Elements Organizer 13 thumbnails recently was a problem with files with MPEG2
video compression. The Adobe word on this was that this is only an Elements Organizer 13 tryout issue...supposed not to exist
in the purchased version.
ATR

Hi, since installing mountain lion on my macbook, it wont download pdf files from internet sites, the same problem does not exist on my mac mini, i am using firefox on both macs, please help!

Hi, since installing mountain lion on my macbook, it wont download pdf files from internet sites, the same problem does not exist on my mac mini, i am using firefox on both macs, please help!

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder... from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop After restart error message appears: - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

PROBLEM: Cannot print from Photoshop
After restart error message appears:
— “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
• All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
The printer printed fine until about 2 weeks ago when this error message appeared. Printing continues from Pages, I-photo, preview etc. — only Photoshop fails.
The printer has been turned on and off, as have open documents been closed and open etc.. Preferences reset. Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
Attempting unsuccessfully to print to Epson 3880
What Adobe support will be of help.
Robert Darling — 2/19, 20, 21,22,23/2015

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

HT5429 How long after you report a problem does it take for the fix to be picked up in maps?

How long after you report a problem does it take for the fix to be picked up in maps? The street I live on is misspelled. It's shown as one word, but it should be two words. Maps cannot find the address when it is spelled correctly, so I have it purposely misspelled it as one word in my contacts, which helps for the most part, however it still tries to place my home on an entirely different street all together. Fortunately this new random street is at least close to where I live. When I used to spell my street correctly with two words, maps would try to send me to the next town over. So it kind of works, as long as I misspell my street, and ignore the fact that it is showing where I live to be a couple of streets down from where I actually live. I live in Connecticut - not in the most populated of areas, but not in the middle of nowhere either. Amazingly enough Google Maps will correctly find my address whether it's spelled with one words or two words. Google Maps also shows my apartment complex, which Apple Maps does not. I really wish Apple would just do a quick pass of the area to fix these issues. I’ve reported the problem several times, months ago. How long will it take for there to be a fix? I keep trying to use the Apple ecosystem, but Google is clearly the better solution for me.

Apple does not do the GIS data for maps. That comes from 3rd party vendors like Tom Tom. I have read it takes some time to update map data. The only thing you can do is report it.
Not to belittle your complaint, but on my end it is Apple that is clearly better. When looking at my house in Google, the satellite photo is more than 4 years old, and the Apple one is much newer. I can tell because of the condition of my home and the neighbor's. They had an above ground pool which was removed 4 years ago and it shows on the Google Map. I had remodeling and roof work done to my home that started 3 years ago and Apple's satellite view showed this work done, which took over a year to complete. I live in the middle of a block in a rural town. Both Apple and Google split the block into 100 parts and put my home close to the beginning of the block instead of where it actually sits. I've reported it to both Google and Apple and no one has changed. Just one of those things. But, keep your chin up, it will get corrected eventually.

Problems importing connections from a SAN directory

Is anybody having a problem importing connections from a directory that's on a SAN?
My network is setup so that the Application Data directory is out on a SAN and when SQL Developer opens up the file dialog, current directory is listed as C:\ and entry in the file name field is file://<server>/<path to my stuff>/Application Data/SQL Developer/. This looks fine but when I click on the "Open" button to get the directory listing, an error dialog pops up with the following message:
The directory C:\file:\<server>\<path to my stuff>\Application Data\SQL Developer is not accessible. Please select a different directory.
When I change the current directory to the drive that maps the SAN location, I get the same message only with C: replaced with another drive letter.
If I had to guess, the dialog is not processing the file:// protocol indicator properly before it attempts to get the directory listing. Does anyone have a work around?

Other users also had problems with network shares, so you're right that might very well be the cause of your problems.
As workaround, try mapping the settings folder to a local drive. Add this to \sqldeveloper\bin\sqldeveloper.conf:
AddVMOption -Dide.user.dir=C:\sqldeveloperHope that helps,
K.

I have a 17" Macbook pro with flickering red and cyan(blue) lines across the screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem.

I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
Here is an image of the issue
http://www.flickr.com/photos/67839707@N08/8884847081/

I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed.

Problem loading JPEGs from network drive?

Hi,
I'm having a rather frustrating problem with Bridge\Lightroom 2 which I think is due to ACR 4.5, and I'm hoping someone here may be able to offer some advice:
When opening (in bridge) or importing (in Lightroom) a network share containing JPEG images the majority of the previews\thumbnails are corrupted.
This screenshot illustrates the problem in bridge (http://www.amirkamal.com/acrbug.jpg). As you can see the thumbnails are corrupt as is the preview, however the magnifier tool on the preview window shows the /true/ image. The irfanview window, in the lower right corner, shows what the image should look like, demonstrating that the JPEG itself is not corrupt.
If I were to import this directory into Lightroom the same problem is present, although the form of the actual image corruption (or even the number of images corrupted) may be different. It also persists through to the develop module as well, making lightroom completely unusable.
If I disable the 'Prefer Adobe Camera Raw for JPEG and TIFF files' option in Bridge then previews are rendered correctly, which is what leads me to believe that ACR is the problem and not Bridge or Lightroom. This would be an acceptable work around for Bridge, but obviously isn't possible for Lightroom.
Also, if I copy the JPEGS locally and then import\view them the problem does not occur. The seems only to affect JPEGs: TIFF and Raw (Canon 350d .CR2) files do not show this problem.
It almost seems as if ACR is trying to process the JPEGs before they have been completely loaded, and thus ends up rendering garbage.
Has anyone else seen this problem before, or have any idea how to fix it?
My system specs are below incase they offer any clues,
thanks
ak
Local machine:
Adobe Bridge CS3 2.1.1.9
Adobe PhotoShop Camera Raw 4.5.0.175
Windows XP 32bit SP2
Intel Pentium 4 D @ 3.3GHz
2Gb RAM
nVidia 7950GT with latest (175.19) drivers
Images stored on:
Windows Server 2k3 R2
Intel Celeron D @ 3Ghz
1Gb RAM
RAID 5 Array
Connected over a 100mbps network

I have never worked on image files which are located remotely in a network ... but I noticed a higher probability of problems occurring when working with Bridge on external hard disk drives connected via USB 2.0. So I acquired the habit of copying the folder of images I plan to work on to an internal hard disk drive and do the work there. When I'm done then I'll copy the whole folder (or at least the modified files therein) back to where it came from.
-- Olaf

Problems transferring data from MacBook Pro to MacBook Pro

I just bought a new MacBook Pro and I am having problems transferring data from my old MacBook Pro. I am using an Apple Thunderbolt to FW adapter to hook both computers and I am using the Migration Assistant. Everything looked ok until the "Transferring Your Information" screen got stuck. It says that it is "Transferring your Application folder..." And it has been stuck for at least the last two hours giving a message that says "About 3 minutes remaining..." This is starting to get ridiculously annoying. Options?

I guess I am finding my own way as time progresses and frustration increases but these are two things that I have found so far:
1. Transfering from one machine to another does not seem to be the most efficient way to do this so using the TimeMachine backup must be the way to go...
HOWEVER
2. In this process I also found another "complication" called: Legacy FaultVault - My computer is encripted and I used this now so called "Legacy FaultVault" app to do it (when it was no a Legacy!). The thing is that you can not transfer documents from your TimeMachine backup to your new Mac if the Legacy Fault Valut is active on your old machine so you first need to desactivate the encription. HOWEVER, this brought another issue...when I tried to desactivate the encription using the Legacy FaultVault screen I got a message saying that I did not have enough disk space to allow me to do that....Isn't that great??? This is a problem by itself and it seems to have some sort of solution I was reading about (not straight forward at all). What I am trying to do now is to copy the folder that contains my files and just paste them on my new machine to see if that works....it looks like my apps are on my new machine, unsure if they are working...need to test this next....
I guess the transfer machine to machine could have sorted out the conflict eventually...after tens of hours or maybe not! Who knows....
A very frustrated Apple fan...
I love Apple products but this is an ISSUE...I feel like there is lack of adecuate documentation around to deal with this or the data transfering apps should be able to deal with this on a more efficient way....just saying...

Problems doing roundtrip from LR to PS

Similar Messages

Maybe you are looking for