Problems for display services in the subarea personnel information

Good Afternoon.
I am configuring ESS for ECC 604.
But the portal not is display the services of :
Address, Bank, Family, Personal Data.
Define Area Group Pages====>SAPDEFAULTESS_ERP2005
Areas=================== >EMPLOYEE_PERSINFO_ERP2005
Subareas================>EMPLOYEE_PERSINFO_SUBPERSINFO_2005
Services=================>EMPLOYEE_PERSINFO_ADDRESS05
And in the SM30==>(V_T7XSSSERSRVCGC)
Ag. Service = Resource
PA EMPLOYEE_PERSINFO_ADDRESS05 = Z_EMPLOYEE_ADDRESS_CO_SERVICE05.
What is the reason for that the system not display this service in this Subaereas?
Kind Regards

Hi Diana. I not have created a service Z. I have created a resource Z. We are implementing ESS for Colombia. For this reason i have created a resource that link the PCD for this new service.
And i have link the resource wth the service and the service with the subarea and the subarea with the area.
Kind Regards

Similar Messages

I bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

i bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

How is your iPhone's display different?
You can check the model number by going to Settings/General/About. These are the model numbers for the various 3 GS models;
MB715LL/A (16 GB Black), MB716LL/A (16 GB White), MB717LL/A (32 GB Black), MB718LL/A (32 GB White), MC555LL/A (8GB)

Problems for displaying values

Hi,
Iam using struts and hibernate, am inserting values into database successfully. But am facing some problem for displaying values in VIEW page.. Am maintainig Session in action servlet..In jsp page only first row displayed numbertimes(depends on number rows in DB) ex i have 4 rows different values. But in View page only first row displayed 4 times. How can i displyed properly .plz help me its urgent?
in advance thanks?

Hi Amol,
in the iview property is the isolation method set to url or to embeded(it should be url)because this might cause the problems described here.
hope it helps,
Yoav

Why doesn't Energy Saver have an option for displaying "Time" in the menu bar?

Why doesn't Energy Saver have an option for displaying "Time" in the menu bar?

I'll provide some Proof
Link 1
Link 2
Link 3
you are not the only person with this problem maybe it will come back in Mountain Lion who knows.

Problem for displaying values

Hi,
Iam using struts and hibernate, am inserting values into database successfully. But am facing some problem for displaying values in VIEW page.. Am maintainig Session in action servlet..In jsp page only first row displayed numbertimes(depends on number rows in DB) ex i have 4 rows different values. But in View page only first row displayed 4 times. How can i displyed properly .plz help me its urgent?
in advance thanks?

Babu,
This has been discussed in many old threads, try to find them. Also u can refer to article "Dependent Dynamic message choicelists ", at my blog
http://www.mukx.blogspot.com/
--Mukul

The maximum SOUND level is low on iPad mini retina, compared to an iPhone 4s. Research shows this is a common problem for this model around the world. Has anyone succeeded in solving this issue? Many Thanks, Peter.

The maximum SOUND level is low on iPad mini retina, compared to an iPhone 4s. Research shows this is a common problem for this model around the world. Has anyone succeeded in solving this issue? Many Thanks, Peter.

The maximum SOUND level is low on iPad mini retina, compared to an iPhone 4s. Research shows this is a common problem for this model around the world. Has anyone succeeded in solving this issue? Many Thanks, Peter.

STK problem for iPhone5? like the basic display

I found some problem for iPhone 5/6 STK's support. the display proactive command,
if the text is very simple, it's ok. like display"hello";
but for the following text with return "0D0A" format
D081D28103012180820281028D81C604436865636B41637442616C20537563636573730D0A4F534E 3A31303030203030303020303131300D0A547820446174653A31312F31312F323031340D0A547820 54696D653A31343A32343A31320D0A547261636B20436F64653A3030343134310D0A53656E646572 204E616D653A4368616E2050696B53616E0D0A4163636F756E74204E756D6265723A343834382034 383030203030303020303230300D0A4163636F756E742042616C616E63653A35382C3830302E3030 0D0A5478204665653A302E3030
the ascii string should be :
CheckActBal Success
OSN:1000 0000 0110
Tx Date:11/11/2014
Tx Time:14:24:12
the terminal response is 801400000D 81030121800202828103022001, mean screen is busy.
is the iphone not support the return character?(i already tried to change the return character to 0x0D, same problem, but for androin phone, it works very good.)
who can help me? Thnx

lets say u restricted the first column like this
bring amount in columns
right click edit
bring in fiscal period from left to right from time dimension
right click fiscal period
hit restrict
enter range of variables
hit ok
hit ok
copy this amount
paste it
now go in 2nd amount
go to fiscal period and hit restrict
u see variable
select variable and right click and hit SET OFFSET
enter -12 twice
now i am asking u to create interval between two variables whose entry is single value
becos
u will use text variable for display
and text variable will only take single entry variable for replacement
so use text variable
go to dispaly and hit Entry of variable
create new variable
hit replacement path
processing by fiscal period
got to replacement tab
replace variable with variable
choose ur 1st entry variable
similarly create another variable with selecting another variable
now use proper offset length and offset start for proper display
i dont know which time char will u use but my assumption
is with respec t to assumption
u will use fiscal period

ISSUE Sharepoint 2013 databases for reporting services on the second server SQL 2012

Hello,
I have server A: Operating system windows 2012 standard, SQL server 2012 standard
instance: Sharepoint contains data for sharepint
instance: Reporting should be contain databases for reporting
Server B:
Windows server 2012 standard contains installation Sharepoint 2013
Sharepoint works (without reporting services), it is OK - databases are located on server A:
My issue is:
When I have installed reporting services on server B, I have already installed SQL server 2012 on server B, it works.
I am able to create report in report builder adn place it in to sharepoint.
But I would like to use only one full SQL machine on server A:
When I reconfigure repoting settings on server A in central administration - manage service aplications,
On the SQL server A in instance reporting , there is automatically created databases. It is no problem.
But the first difference is, when I want to manage service aplication for reporting in
Provision Subscriptions and Alerts, there is information
SQL Server Agent state cannot be determined
When I want to create report in report builder, I have issue:
server A-7380mw016\reporting it means server A with full SQL server:
The Test of connection was successful
Then I have clicked test connection
I have recieved this screen with fail: Logon faild for user NT Authority\anonymous logon
My account belongs to SQL admin on server A (A-7380mw016\reporting) I do not know it is not possible to create report, when it is possible to test connection in the first step and in the second step, there is problem...
Please, can somebody help me?

Hi,
Since you are getting an Anonymous Logon error, it appears there may be a problem passing your credentials to the SQL Server Agent Service. This would indicate a Kerberos issue. See this thread for details:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/46b7c773-6a77-435d-b471-cb9a6ec41c43/has-anyone-else-upgraded-reporting-services-to-denali-2012
Microsoft Virtual Academy: Breakthrough Insights using SQL Server 2012 : Analysis Services and Credible, Consistent data (Module 2) - Configuring and Securing Complex BI Applications in a SharePoint 2010 Environment with Microsoft SQL Server 2012
http://technet.microsoft.com/en-us/video/Video/hh858469
Tips from the video:
We are connecting to Reporting services using Kerberos when using Reporting Services in SharePoint integrated mode
For the account using reporting services, we just need a dummy SPN. We go to Attribute editor tab in AD for RS account. And then we will be enabled with Delegation tab.
In Delegation tab. I we are using claims to windows token, we need to use "Trust this user for delegation to specified services only"
There you have 2 options: "Use Kerberos only": It means I only want to delegate in the situation where the service that is doing the delegation actually has the Kerberos ticket to start with
"Use any authentication protocol" When we need protocol transition (like from NTLM to claims for intra farm communication)
We need to delegate this to SQL server.
Please check out these articles as well:
How to configure SQL Reporting Services in SharePoint Server for Kerberos authentication
http://support.microsoft.com/kb/2723587
Configure Kerberos authentication (Office SharePoint Server)
http://blogs.technet.com/b/mbiswas/archive/2009/07/10/configure-kerberos-authentication-office-sharepoint-server.aspx
Thanks.
Tracy Cai
TechNet Community Support

Problem in displaying text inside the item label - JFREECHART

Hi All,
I dont know whether this is the right place or not to post the queries related to jfreechart here .
I am facing a problem in displaying the text inside the item label in jfreeChart. I am trying to print the text in 2 lines one below the other at the top of each bar in waterfall chart.
Please find the code below in next post. The problem i am facing is it is neglecting the new line character . If any one knows how to display the text one below the other please help me out .
Thanks in advance .
Regards,
Diw

i am facing the problem in pasting the complete code as its exceeds the message text limitiation, please find the link below for the code .
http://www.java-forums.org/java-2d/12087-problem-displaying-text-inside-item-label-jfreechart.html#post36648
Early response will be appreciated . Thanks in advance
Regards,
Diw
Edited by: Diw on Sep 30, 2008 11:15 AM
Edited by: Diw on Sep 30, 2008 11:16 AM

Problem deploying web service with the deploy tool (J2EE)

Hello,
I am trying to deploy a sample Web Service on the Sun Java System Application Server Platform Edition 8.1 2005Q1.
I run into a deployment problem ("jaxrpc compilation exception") when I have one of the web methods declared (in the endpoint interface) to throw a service-specific exception. The problem disappears when I change the declaration to throw an Exception.
Here is the exception class:
public class StockNotFoundException extends Exception {
private String message;
public StockNotFoundException(String message) {
super(message);
this.message = message;
public String getMessage() {
return message;
the endpoint interface:
public interface StockServiceIF extends Remote {
// the service methods
public boolean sellStocks(String ticker, int quantity)
throws RemoteException, StockNotFoundException;
and here are the error messages I am seeing:
in the deploy tool dialog:
distribute: C:\Beginning J2EE 1.4\Ch13\StockServiceApp\StockServiceApp.ear
deployment started : 0%
Deploying application in domain failed; Fatal Error from EJB Compiler -- jaxrpc compilation exception
; requested operation cannot be completed
!!! Operation Failed !!!
!!! With The Following Failure Messages !!!
Deploying application in domain failed; Fatal Error from EJB Compiler -- jaxrpc compilation exception
; requested operation cannot be completed
Fatal Error from EJB Compiler -- jaxrpc compilation exception
and in the server log:
[#|2005-02-01T18:30:47.856-0600|INFO|sun-appserver-pe8.1|javax.enterprise.system.tools.deployment|_ThreadID=12;|DPL5109: EJBC - START of EJBC for [StockServiceApp]|#]
[#|2005-02-01T18:30:47.856-0600|INFO|sun-appserver-pe8.1|javax.enterprise.system.tools.deployment|_ThreadID=12;|Processing beans ...|#]
[#|2005-02-01T18:30:47.936-0600|INFO|sun-appserver-pe8.1|javax.enterprise.system.stream.out|_ThreadID=12;|
error: incorrect fault part name for fault "StockNotFoundException" of operation "sellStocks": "StockNotFoundException"|#]
[#|2005-02-01T18:30:47.966-0600|INFO|sun-appserver-pe8.1|javax.enterprise.system.tools.deployment|_ThreadID=12;|Total Deployment Time: 1001 msec, Total EJB Compiler Module Time: 0 msec, Portion spent EJB Compiling: 0%|#]
[#|2005-02-01T18:30:47.966-0600|SEVERE|sun-appserver-pe8.1|javax.enterprise.system.tools.deployment|_ThreadID=12;|Exception occured in J2EEC Phase
com.sun.enterprise.deployment.backend.IASDeploymentException: Fatal Error from EJB Compiler -- jaxrpc compilation exception
     at com.sun.enterprise.webservice.codegen.JaxRpcRICodegen.accept(JaxRpcRICodegen.java:206)
     at com.sun.enterprise.deployment.EjbBundleDescriptor.visit(EjbBundleDescriptor.java:584)
     at com.sun.enterprise.deployment.Application.visit(Application.java:1333)
     at com.sun.enterprise.webservice.codegen.JaxRpcRICodegen.run(JaxRpcRICodegen.java:103)
     at com.sun.ejb.codegen.IASEJBC.doCompile(IASEJBC.java:785)
     at com.sun.ejb.codegen.IASEJBC.ejbc(IASEJBC.java:563)
     at com.sun.enterprise.deployment.backend.EJBCompiler.preDeployApp(EJBCompiler.java:340)
     at com.sun.enterprise.deployment.backend.EJBCompiler.compile(EJBCompiler.java:209)
     at com.sun.enterprise.deployment.backend.AppDeployer.runEJBC(AppDeployer.java:284)
     at com.sun.enterprise.deployment.backend.AppDeployer.deploy(AppDeployer.java:176)
     at com.sun.enterprise.deployment.backend.AppDeployer.doRequestFinish(AppDeployer.java:107)
     at com.sun.enterprise.deployment.phasing.J2EECPhase.runPhase(J2EECPhase.java:146)
     at com.sun.enterprise.deployment.phasing.DeploymentPhase.executePhase(DeploymentPhase.java:71)
     at com.sun.enterprise.deployment.phasing.PEDeploymentService.executePhases(PEDeploymentService.java:633)
     at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:188)
     at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:520)
     at com.sun.enterprise.management.deploy.DeployThread.deploy(DeployThread.java:143)
     at com.sun.enterprise.management.deploy.DeployThread.run(DeployThread.java:171)
|#]
I would appreciate any pointers to resolving this issue.
Thanks,
Satyen

Can you post the WSDL that was generated by the tool
for this interface ?I generate the WSDL using "wscompile -define -nd . -classpath ..\build\classes -f:wsi service-config.xml", and here it is:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="StockService" targetNamespace="urn:stockService" xmlns:tns="urn:stockService" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types>
<schema targetNamespace="urn:stockService" xmlns:tns="urn:stockService" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="StockNotFoundException">
<sequence>
<element name="message" type="string" nillable="true"/></sequence></complexType>
<element name="StockNotFoundException" type="tns:StockNotFoundException"/></schema></types>
<message name="StockServiceIF_sellStocks">
<part name="String_1" type="xsd:string"/>
<part name="int_2" type="xsd:int"/></message>
<message name="StockServiceIF_sellStocksResponse">
<part name="result" type="xsd:boolean"/></message>
<message name="StockNotFoundException">
<part name="StockNotFoundException" element="tns:StockNotFoundException"/></message>
<portType name="StockServiceIF">
<operation name="sellStocks" parameterOrder="String_1 int_2">
<input message="tns:StockServiceIF_sellStocks"/>
<output message="tns:StockServiceIF_sellStocksResponse"/>
<fault name="StockNotFoundException" message="tns:StockNotFoundException"/></operation></portType>
<binding name="StockServiceIFBinding" type="tns:StockServiceIF">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc"/>
<operation name="sellStocks">
<soap:operation soapAction=""/>
<input>
<soap:body use="literal" namespace="urn:stockService"/></input>
<output>
<soap:body use="literal" namespace="urn:stockService"/></output>
<fault name="StockNotFoundException">
<soap:fault name="StockNotFoundException" use="literal"/></fault></operation></binding>
<service name="StockService">
<port name="StockServiceIFPort" binding="tns:StockServiceIFBinding">
<soap:address location="REPLACE_WITH_ACTUAL_URL"/></port></service></definitions>
---------------------------------------------------------------------------------------------------------

Problems for display SAP Library on SAP Menu.

Hi SAP Gurus, I have I problem with SAP Library:
I take the following evaluation path:
Menu SAP - Help - SAP Library
and when a click on this option it appears the following msg:
Error in SAP HTML-Help (SHH.EXE)
Please install /update Microsoft HTML-Help. Using unsopported versions may cause problems in help display. For details please check the entries in the file SAPDOCCD.LOG in hw windows directory.
Can Anybody help me with this issue?
Best Regards to All.

Hi,
Same problem here since we upgraded to Sapgui 7.10.
Any solution?
Thanks,
Jon

Win XP : problems for itune to connect the airport remote speakers

Hi there,
My config is iTunes installed on my PC, a Tecom wifi router and two airport express base stations connected to speakers in different rooms of my flat.
At first, iTunes has no problem for seeing the airport stations and the music goes well through the wifi.
After two or three days, the PC doesn't see the stations anymore in iTunes (they actually still show, but in gray) .
If I want them to be seen again, I need to close iTunes, go to "connexions", disconnect my PC from the network, connect again, run iTunes again, and then... it works !
That's a bit boring. As strange as it could be, the act of shuting down my PC every night and running it "fresh" every morning doesn't help.
Has any one any suggestion on how it could work better ?

Hello Deb Parks. Welcome to the Apple Discussions!
I'm not sure if, by product key, you mean the encryption password for your 802.11n AirPort Extreme Base Station's (AEBSn) wireless network. Is your AEBSn's wireless network currently running encryption (WEP or WPA)? If so, temporarily disable it, and then, see if the PC can connect.

Address For Customer Services in the

Hi All,?I bought a Zen Vision:m 60GB in January 2007 and applied for the Free Docking Station under a promotion that they were doing.Sent it off 5 weeks ago Recorded Deli'very. It was signed for at their end, but so far nothing. I've kept a copy of all the paperwork which I intend to send off again, however I can't find an address for their Customer Services Dept in the UK.Can anybody point me in the right direction. Thanks?

Hi,with me the same thing happened!! Half december I applied for this free docking station (they had the same promotion in the?Netherlands). However I never received anything (it wasn't recorded deli'very). Now the url for this promo isn't functioning anymore. Did anybody receive the docking station?Because I couldn't find an e-mail adress for customer services I just send an e-mail to support. I wonder if?Creative will?reply. If not I?'m afraid?some people at Creative?are misleading customers.

Problems generating multiple services from the same EAR using servicegen

I have a single EJB JAR that contains multiple stateless session beans. I
want to expose each of these individually as a service. So I have defined
the following in my build file:
<servicegen destEar="${ear.file}" warName="${war.file.name}"
contextURI="web_services">
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="AService"
serviceURI="/AService" includeEJBs="AService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="BService"
serviceURI="/BService" includeEJBs="BService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="CService"
serviceURI="/CService" includeEJBs="CService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="DService"
serviceURI="/DService" includeEJBs="DService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="EService"
serviceURI="/EService" includeEJBs="EService" generateTypes="True"
expandMethods="True"/>
</servicegen>
I execute the task and it runs without issue. However, when I attempt to
deploy the EAR I get some odd results (there are multiple jars listed all
with my original name and then a number appended, for example MyApp.ear2).
The deployment fails because each of these JARs contains the same session
beans.
So, I'm wondering if my only option is to package each session bean in a
separate EJB JAR or if there is another way I could get this to work.
Thanks,
Rob

Thanks, Neal. I'll do as you suggest.
Just a little feature enhancement request, as well. It would be nice if the
option existed to break out the webservices for all the session beans in a
ejb rather than creating one all-encompassing interface of all the methods.
I think this would be a useful feature.
Thanks, again,
Rob
"Neal Yin" <[email protected]> wrote in message
news:[email protected]...
I am not sure what can cause this. But I will make servicegen check for
duplicate.
For now, in order to make sure your automatic build process, you can use
ant's build in task "jar" to update your application.xml with a correctone
after servicegen.
-Neal
"Rob Moore" <[email protected]> wrote in message
news:[email protected]...
Neal,
After discussing this issue with a coworker, I found that when he buildsthe
ear on his machine using the servicegen entries I specified previously,the
application.xml is generated correctly. Mine, as you guessed, puts in
multiple module entries all containing references to the same jar. I'm
puzzled because we are apparently running in the same environment. Anyidea
what might be causing it?
Thanks,
Rob
"Neal Yin" <[email protected]> wrote in message
news:[email protected]...
Hi Rob,
There is something wrong during generating application.xml for the
ear.
After servicegen, if you open generated application.xml, you probablycan
see duplicate entries for one module. Please go ahead delete thoseredundant
entries. Let me know if this works.
-Neal
"Rob Moore" <[email protected]> wrote in message
news:[email protected]...
I have a single EJB JAR that contains multiple stateless session
beans.
I
want to expose each of these individually as a service. So I havedefined
the following in my build file:
<servicegen destEar="${ear.file}" warName="${war.file.name}"
contextURI="web_services">
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="AService"
serviceURI="/AService" includeEJBs="AService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="BService"
serviceURI="/BService" includeEJBs="BService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="CService"
serviceURI="/CService" includeEJBs="CService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="DService"
serviceURI="/DService" includeEJBs="DService" generateTypes="True"
expandMethods="True"/>
<service ejbJar="${ejbc.jar.file}"
targetNamespace="http://www.acme.com/xauto" serviceName="EService"
serviceURI="/EService" includeEJBs="EService" generateTypes="True"
expandMethods="True"/>
</servicegen>
I execute the task and it runs without issue. However, when I
attempt
to
deploy the EAR I get some odd results (there are multiple jars
listed
all
with my original name and then a number appended, for exampleMyApp.ear2).
The deployment fails because each of these JARs contains the samesession
beans.
So, I'm wondering if my only option is to package each session bean
in
a
separate EJB JAR or if there is another way I could get this to
work.
>>>>
Thanks,
Rob

I have been billed for a service under the wrong wireless number. Please contact me.

I have a charge for a service that is clearly not mine and is a duplicate to mine. It is referenced to an unknown wireless number...not mine. Please credit my account for $20.00.
Thanks,

This is a peer to peer customer forum. No one has access to your account here or anyone else's. Call customer service and sort it out with them.

Problems for display services in the subarea personnel information

Similar Messages

Maybe you are looking for