Problems in screen exit of COR1 and COR2

Hi Experts
I have enhanced the cor1 or cor2 screen using the enhancement PPC00020 AND APPENED THEtwo fields IN AUFK table
and CAUFVD and i am passing the value through EXIT_SAPLCOKO_006
and i have added the code like this
tables : caufvd.
move-corresponding caufvd to e_coci_aufk
But it is not saved in the aufk table.
Please help me
Regards
Manoj

Hi ,
Write the code in
MODULE status_0900
it will creates new include program. In that include program you will definetly get the field you require.
Syntax :--
loop at screen .
      if screen-name = '*******'                     " Name of the screen element to deactiive...
               screen-input = 0.   OR   screen-active = 0.
               MODIFY SCREEN.
      endif.
endloop.
Put a BREAK-POINT at the screen-name statement & check.
Regards,
Venu.

Similar Messages

Problem in Screen Exit

Hi all,
I have a problem in Screen Exit. My requirement is to create one new field in ME21N transaction code, I did that using screen exit, which offers me a tab of Customer Data. That is working fine. My problem here is when the user enters the value in that(costcenter) field tax jurisdication code should populate automatically for the particular entry. I used user exit for this purpose to update taxjurcode field in the table. But after the user exit execution the rest of the program code executes and it updates the EKPO table which over writes the entries which i was updating using my user exit code. How can i get rid off this problem. Please throw some light on that. Thanks.

You are right. My user exit is also triggering that place only for the ME22n and ME23n...........it is strange for me as it is not working for ME21n. Which is not updating with the statements that i provided in User exits.
When i am debugging the program after the user exit it is taking me to some std program where the entries were overwritten. That is where i face the problem.
Any suggestions.

Screen Exit for MI01 and LI01N

Hi,
I need a screen exit for MI01 and LI01N. Please reply ASAP

Hi Nishu,
For MI01 below are the exits:-
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MB_CF001 Customer function exit for update of material document
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read From RESB and RKPF For Print List in MB26
MBCFC003 Maintenance of batch master data for goods movements
MBCFC004 Maintenance of batch specifications for goods movements
For LI01N :-
MWM2S001 Exit to Determine 2-Step Picking Characteristic
MWMBAP01 Enhancement for BAPI WarehouseTransOrder.GetDetail
MWMBAP02 Enhancement for BAPI WarehouseStock.GetDetail
MWMD0001 Transfer order print via RLVSDR40
MWMD0002 Transfer order print as multiple process with RLKOMM40
MWMIDI07 Enhancement for Output WMPIHU (Create Pick-HU) Inbound
MWMIDO11 Enhancement for message WMTORD: TO with several items
MWMIDO12 Enhancement for Output WMPIHU (Pick-HUs) Outbound
MWMIDO13 Extension for WMMBXY (subsequent tasks after goods movement)
MWMPP001 Enhancement WM/PP Interface (automatic TR generation)
MWMRF001 RF: Influence Display of material description
MWMRF100 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0100)
MWMRF101 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0101)
MWMRF102 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0102)
MWMRF104 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0104)
MWMRF105 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0105)
MWMRF106 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0106)
MWMRF107 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0107)
MWMRF108 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0108)
MWMRF151 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0151)
MWMRF152 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0152)
MWMRF153 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0153)
MWMRF170 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0170)
MWMRF202 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0202)
MWMRF203 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0203)
MWMRF204 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0204)
MWMRF205 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0205)
MWMRF212 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0212)
MWMRF213 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0213)
MWMRF221 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0221)
MWMRF302 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0302)
MWMRF303 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0303)
MWMRF304 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0304)
MWMRF305 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0305)
MWMRF312 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0312)
MWMRF313 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0313)
MWMRF321 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0321)
MWMRF400 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0400)
MWMRF402 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0402)
MWMRF403 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0403)
MWMRF404 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0404)
MWMRF405 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0405)
MWMRF406 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0406)
MWMRF410 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0410)
MWMRF411 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0411
MWMRF412 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0412)
MWMRF502 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0502)
MWMRF503 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0503)
MWMRF504 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0504)
MWMRF505 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0505)
MWMRF600 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0600)
MWMRF601 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0601)
MWMRF630 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0630)
MWMRF631 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0631)
MWMRF632 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0632)
MWMRF633 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0633)
MWMRF634 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0634)
MWMRF650 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0650)
MWMRF651 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0651)
MWMRF700 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0700)
MWMRF701 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0701)
MWMRF702 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0700)
MWMRF703 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0703)
MWMRF704 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0704)
MWMRF705 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0705)
MWMRF760 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0760)
MWMRF761 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0761)
MWMRF762 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0762)
MWMRF763 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0763)
MWMRF764 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0764)
MWMRF765 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0765)
MWMRF766 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0766)
MWMRF767 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0767)
MWMRF768 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0768)
MWMRF769 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0769)
MWMRF777 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0777)
MWMRF800 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0800)
MWMRF801 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0801)
MWMRF802 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0802)
MWMRF803 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0803)
MWMRF804 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0804)
MWMRF805 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0805)
MWMRF806 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0806)
MWMRF807 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0807)
MWMRF888 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0888)
MWMRF889 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0202)
MWMRF998 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0998)
MWMRF999 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0999)
MWMRFCOD Enhancement for function codedisabling
MWMRFDLV select delivery by user criteria
MWMRFPRT Enhancement for printing
MWMRFSSG user exit for sorting TOs in RF system-guided transaction
MWMRFUP Customer defined general purpose pushbutton called from scr.
MWMRP001 Cust. Exit for Fixed Bin Replenish.: Delivery Item Selection
MWMRP002 Cust. Exit for Fixed Bin Replenishment: TR Quantity Distr.
MWMRP003 Customer Exit for Replenishment using RLLNACH1
MWMRP004 User Exit for Replenishment using RLLNACH4
MWMTO001 Enhancements for end of transfer order generation
MWMTO010 Exit: Calculation of Total Planned TO Processing Time
MWMTO011 Correction of Planned Processing Time for TO Item
MWMTO012 Correction of Sorting and Split Transfer Order
MWMTO013 Stock Removal for Sev. Storage Types as in Stringent FIFO
MWMTOAU3 Separate selection of posting changes for autom.TO creation
MWMTR001 Exits at the end of transfer rqmnt creation (IM,PP interf.)
Choose the approriate one which suits your requirement.
Hope it helps you.
Regards
Abhii...

System startup Problem grey screen is going regularly and automatically shutdown

Hi
kindly resolve us this problem urgently
error msg. :- System startup Problem grey screen is going regularly and automatically shutdown
thanks
Dhaval Oza

Use RECOVERY MODE.
Boot from another drive with a copy of OS X too is always good.
A Safe Boot at a minimum.

Want to find the screen exits in VA01 and VA02

Hi All,
I want to find the screen exits in VA01 and VA02.
How to find these screen exits.
Actually i wnat to add a new custom field to the Additional data B tab on the header of VA01 transaction code.
Now intially i want to know whether there are screen exits in VA01 transaction code ?If yes please provide the names?
Please help me regarding this.

Please check this
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
The SAPMV45A , 8309 screen is the Additional Data B tab to add your custom fields . To capture the data from this custon field you can use
the user exit MV45AFZZ, USEREXIT_SAVE_DOCUMENT_PREPARE OR
USEREXIT_SAVE_DOCUMENT depening on your functionality.
Thanks
Vinod

Screen exit for co11n and problems in writting the PBO and PAI Logic ?

Hi People,
I am developing a screen exit for transaction co11n. I have found the exit ( CONFPP07 ) ... I created a project and have
assigned this exit and activated the project. I have created a field named SHIFT on clicking this field i have to give three
possible values (a,b,c ) and i have to store these values in some table .......... now my problem is in which include i
have to write PBO and PAI logic ... should i have to write pbo logic in the include provided in the exit
EXIT_SAPLCORU_S_100 and PAI in EXIT_SAPLCORU_S_101.......or .........Can any tel me what should i have to do to
meet the requirements... and in which structure i have to add this field so that it gets stored in some table.
Thanks in Advance.

Hi,
Use the includes in the program SAPLXCOF given in CONFPP07 Exit.
You may use include zxcofzzz ( for Subprograms and Modules )
by creating it upon double click.
Regards,
Wajid Hussain P.

Problem with Screen EXITS.

Hi,
I need to to some enhancements to my std screen for T.code IE03.
I found screen exits and Function exits for that .
I create the subscreen in screen exit and linking to the functional exit,
Whem i am activiting it raises the error
"Incorrect nesting Before the Statement module structure introduced by function must be conclude by endfunction."
Can any one suggest the solution for this problem.
Points will be awarded.
regards,
Jayasimha

The Problem can be due to incorrect closing of syntex.. either in function module or in PBO or PAI module. i.e you might have started by saying function but endfunction is missing or same goes for PBO / PAI module do check it and let us know
No Rewards Pz..

Problem in Screen Exit for me21

Hi,
I have developed Screen Exit in ME21N ..and facing a problem where to write the code...I have a little bit confused with all the function exits...
i used move-corresponding...in the function exit but i am getting errors ..if i am trying to activate the code it is activating...
could you plz help me out guys ..
points will be rewarded..
Regards,
Ravi Ganji

hi,
if u want to add new fields in the transaction, this is sample code for CNEX0006 enhancement.
First create a project in cmod and attach the enhancement CNEX0006 to the project.
1.go to se11 and in the PROJ table u will find ci_proj include , in this add ur custom fields.
2.go to se51 give SAPLXCN1 in the program name with screen number 0600 , create the subscreen and in the layout choose Dict./Program fields and drag and drop in the screen .
3. if u want to write any logic before the screen is displayed do it in PBO.
4. now in the function exit EXIT_SAPLCJWB_002 , go in the INCLUDE ZXCN1U11 and write this logic
move-corresponding sap_proj_imp to proj.
5.4. now in the function exit EXIT_SAPLCJWB_003 , go in the INCLUDE ZXCN1U12. and write this logic
move-corresponding proj to cnci_proj_exp.
Activate the project .
Hope this helps
Regards
Syed

Screen Exit for ME51N and ME52N ??

Hi all,
I have to replace the standard Field "Requisitioner" in the CONTACT Tab with a Z table field with Search help and I have to make it mandatory, so that the user MUST enter the Requisitioner and its F4 help can be used from the Z Table field.
For this i need to modify standard program's screen using screen exit.
How can i meet the requirement?
Any sugegstions are welcomed...Helpful answers will be rewarded for sure..
Thanks in advance,
Regards,
Tejas

Check the threads -
User Exit or BADI for ME21N or ME51N
ME51N user exit
Screen Exit for ME51N
Regards,
Amit

Problem with screen going suddenly blurry and no controls working

Allo everyone,
I bought a brand new iMac a few months ago and twice I've had the problem of the computer freezing with the screen going completely blurry and none of the controls working. No mouse clicks, no keyboard taps, nothing.
The last time it happened is tonight, and I had Firefox, Safari and Quicktime running at the same time. I can't remember what I had open the first time, I think it was just Firefox.
Nothing short of hitting the power button and switching off the computer can solve the problem. After rebooting it works perfectly.
It's got me a little worried as my partner and I work on some quite major projects, and I'd hate to think it's going to do that in the middle of our work.
Is this a software or possible hardware malfunction? Or am I doing something wrong here?
Many thanks in advance.

Definitely take it back, quickly. Most likely, by symptoms, you have a failing motherboard. Seems to be an issue with HP with many of their models. If your warranty expires your goose is cooked. I'd recommend you show the repair facility the actual symptoms before you leave the store, and get them to write up the problem accurately at time of drop off and get a copy. Get a paper trail. If you ship it in include a detailed description and keep a copy.

Problem with screen exit CNEX0008

Hello,
Some one activated the exit CNEX0008,because of that it is going short dump.
Could you please let me know, how to deactivate the exit.
Thanks and regards,
Pavan Meda

HI Pavan,
Goto SMOD and give this EXIT name there you willl find the function modules when you go into the include programs you find the code, if you want you can comment the code over here or find the project from here in the where used list and take the Project and goto CMOD and deactive the Exit.
Srini

Problem with Screen Exit (CO01)

Hello all,
I implemented screen exit (PPCO0012) for CO01. When I try to open customer screen tab in CO01 it is giving an error " screen SAPLXC01 100 must be an include type (screen error)".
Can anybody put light on this.
Thanks..
Apps

Hi,
you need to change screen type of that window. You just need to change it from Normal to Subscreen in SE80. It's writtent in the ehancement documentation.
Create subscreen SAPLXCO1 0100 with your own fields.
Cheers

Problem in screen exit for Production Order

Hi ,
Created a screen with one field RESB-POTX1 and called it from dictioanry directly so the field defaultly assigned as RESB-POTX1. As it is a item text field and am creating in header level screen .
in PAI functional module exit am capturing value for this field enter by the user and updating directly to RESB table but the problem is while retreiving data in CO03 am not getting value for this field .
In PBO when i pass value from varaible ( got through from RESB ) directly like RESB-POTX1 = l_potx1 ( variable )
it throws an error resb-potx1 not declared . but i declared as tables : resb in pai exit .
as am updating directly resb am not created in field aufk structure ...how to pass this value

hi,
if u want to add new fields in the transaction, this is sample code for CNEX0006 enhancement.
First create a project in cmod and attach the enhancement CNEX0006 to the project.
1.go to se11 and in the PROJ table u will find ci_proj include , in this add ur custom fields.
2.go to se51 give SAPLXCN1 in the program name with screen number 0600 , create the subscreen and in the layout choose Dict./Program fields and drag and drop in the screen .
3. if u want to write any logic before the screen is displayed do it in PBO.
4. now in the function exit EXIT_SAPLCJWB_002 , go in the INCLUDE ZXCN1U11 and write this logic
move-corresponding sap_proj_imp to proj.
5.4. now in the function exit EXIT_SAPLCJWB_003 , go in the INCLUDE ZXCN1U12. and write this logic
move-corresponding proj to cnci_proj_exp.
Activate the project .
Hope this helps
Regards
Syed

Problems sharing screen w/ iMac Intel and macbook

'm new to networking, so I hope someone can lead me in the right direction. I have a new iMac Intel running Leopard. I also have a MacBook2,1 running Tiger. They both are on my Airport Extreme network.
I can screen share from my iMac to my MacBook, but not the other way around. When I try to access my iMac from my MacBook I get the dreaded beachball for about a minute then it won't connect. I have "file sharing" and "screen sharing" enabled in my system prefs on my iMac.
Am I missing something here?

I have a similar problem. I screen share with my friend who's across the Atlantic ocean. We both have Macbooks (mine is a Pro).
I can share my screen to his account but not the other way around. The option to share his screen is always grayed out. HOWEVER, if he quits his account and logs into say the "Guest" account, all of a sudden I can share his screen.
All the Sys Prefs options are the same for both accounts, so I have no idea why this is happening. We both upgraded our previous Tiger installations so I'm not sure why his is causing so much trouble.
Last thing: last nite I was able to share his screen but NOT by click on the little icon at the bottom of iChat. A totally different, long horizontal bar showed up on the screen asking me to choose either sharing my screen or his. If anyone can point me back to that option, I would appreciate it because it was the only thing that actually did work.

Problem in Screen exit for MIGO using MB_MIGO_BADI?

hi all,
I have customized the MIGO screen to add two fields and the data entered in these fields is saving in a custom data base table using the POST_DOCUMENT method of the BADI.
The problem is i am unable to write the code to display these values in the MIGO, while displaying the material document.
Please help me on how to solve this problem by suggesting the method or sample code?
Thanks,
Vamshi.

Hi,
Under the line modify method declare a flag and set to u2018Xu2019 checking for material document number by which we can set the fields to be in display mode when we open MIGO for display of material document created after doing goods receipt.
in method IF_EX_MB_MIGO_BADI~LINE_MODIFY
if not cs_goitem-mblnr is initial.
flag = 'X'.
endif.
Do write the code in PBO of the screen.......which you have created ....
In order to make the fields to be in display mode during the display of material document, create a module under PBO and import the flag value and the production order number details in the method LINE_MODIFY and if that flag = u2018Xu2019, use
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZZGBAGS'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Thanks,
Shailaja Ainala.

Problems in screen exit of COR1 and COR2

Similar Messages

Maybe you are looking for