Problems locating my .mdb file

I have a SQL server with tables I use in my reports. I was handed an access DB (.mdb file) on a flash drive and told to incorporate that data into my reports along side the data from the tables on the SQL server.
The guy that set up the tables and the server is no longer at my company so we have no idea where we need to put this .mdb file so that Crystal Reports can access it. Our reports are run by users outside of our office via a VPN so the file cannot be local but on the server. We have put it on the SQL server in many different places/folders but when I use the database expert in CR and try to create a new ODBC(RDO) conection the .mdb file is not listed.
Does anyone know where this file should be located??

Aminah,
Since you were handed the .mdb file on a thumb drive, it's probably a safe bet that all of the data on it is now static (no longer being updated by users). Based on that, I would use Access's Upsizing Wizard to migrate the data to your SQL server.
You will see MUCH better performance from your report and you will not have to worry about report users or CR Server having access to the network share file where you would otherwise have to place the .mdb file.
If you don't have write access to your SQL server, ask your network admin of DBA for help on this.
Jason

Similar Messages

Launching Microsoft Access from Internet Explorer to view a downloaded MDB file opens the wrong file (not a problem if I use Firefox)

When clicking on a link (in Internet Explorer 9) to download an Access MDB file and then choosing to open the file directly in Microsoft Access (2007) instead of saving it, the file is copied to Temporary Internet Files but Microsoft Access tries to open
a different file and displays an (Unrecognized database format) error.
When I click on the option to open the file, the MDB file is copied to Temporary Internet Files\Content.IE5 but instead of that file, Access tries to open a different (incorrect) file located in Temporary Internet Files\Content.MSO (e.g. in the above error
message, NativeView.do is an XML file containing an error message).
I don't see this problem with Word, Excel or PowerPoint files. When opening a Word file (without saving) the Word file is copied to Content.IE5 but an identical .tmp file is created in Content.MSO which when opened in Microsoft Word displayed the required file
correctly. The same happens for Excel files. PowerPoint appears to be handled a little differently (no .tmp file created in Content.MSO but the required file is still copied to Content.IE5) but the PPT file is still opened correctly in Microsoft PowerPoint.
I think the Content-Type "application/msaccess" is fine because Internet Explorer does launch Microsoft Access. It just tries to open the wrong file (or so I think). However, it looks like the file type is not being determined. Here is what I noticed
when trying to open different Microsoft Office files using Internet Explorer:
The last one is the MDB file. As you can see, only for this type of file, the "Type" (Microsoft Office Access 2007?) is not displayed in this Open/Save dialog box.
On Firefox, I don't see this problem. When I tried clicking on the link to the MDB file in Firefox, Microsoft Access was launched and the file was opened correctly. Is there something I can do so the MDB file is opened properly using IE? I can add/change headers
in the HTTP response that writes this file to the output stream (on disk) if that helps.
Thanks for your time!

Sounds like a problem symptom to be discussed in either an IE forum or an Access forum, not here. How did you come to post here? ForumsRedesign. That might be an on-topic issue for this forum. <eg>
Can you find your way to either of those other forums easily from here? Another on-topic question for here I think. ; )
Robert Aldwinckle
Oops, my bad. Thanks for letting me know! :)
I've re-posted it here: http://social.technet.microsoft.com/Forums/ie/en-US/1a818501-296c-42fb-8abb-ba914629c962/launching-microsoft-access-from-internet-explorer-to-view-a-downloaded-mdb-file-opens-the-wrong-file?forum=ieitprocurrentver
Hopefully that's the right place for this.
Cheers!

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

Read access mdb file in labview via ADO/DAO problem

Hi guys,
I am now facing one problem that I want to import ACCESS database (ver2000) files into labview and turn it into tables.
but if I use ADO(actually using LABSQL) I have to create the ODBC in control panel, if I use DAO, I don't know how to call the activeX method.
I would like to realize like this:
choose in a directory which mdb file I would like to open, and then open it and show it in a labview table, but using AD0 I have to create connection for each file, does it stand a chance to open it without specify the connection in control panel?
He Liang

You can use a Connection String defined by you like this
You can get the basic connection string by creating a UDL file and editing that file in Wordpad.
Hope this helps
David
Message Edited by David Crawford on 11-27-2006 01:04 PM
Attachments:
Connection String.jpg ‏13 KB

Problems "locating" referenced files after importing from iPhoto.

I recently began importing old iPhoto libraries to Aperture, mostly successfully, but have run into a couple problems locating referenced files. While the locate referenced files function worked for most of the photos, there are a handful of photos that, when I located the original file, the time stamp was different (by 2 hours in most cases) and it was about 15% smaller than the file Aperture was looking for. As a result, even though it was clear from the thumbnails that they were the same images, Aperture doesn't even give me the option to Reconnect them.
Aperture 3.4.5
OS X 10.7.5

. I use the Reconnect All button, but it only finds the one file, even when there are hundreds more in the same folder that are unlinked.
Reconnect all works best, if you select all files that need reconnecting at once, and then select the first file in the list to reconnect. If the other files are in the same folder and are correctly named and match, then "reconnect all" should do it. But if the filenames differ, you will have to do it one by one.
Also, the files are all still correctly linked in iPhoto, but every single link is broken once I import it to Aperture.
You are importing with "File > Import > Library", correct?
That is supposed to work. Have you tried to repair your iPhoto Library before importing to Aperture?
Use iPhotos First Aid Tools to repair:
Try to repair the permissions, followed by repairing the library.
To launch the First Aid Tools, hold down the Command and Option keys ⌥⌘ while double-clicking the iPhoto library or the iPhoto icon in the Dock.
The iPhoto Library First Aid dialog appears. Select the Repair option you want to use - first "permissions", then "database".
Léonie

Problem in updating in MDB file

I am using MDB file to store the user name and password. As per my requirement once user name is matched then password needs be updated. But unfortunatelly it is not working.
In my database col1 is user name and col2 is password.
For Update I am using SQL query File name is Write username and pass - Update Using SQL.vi
But I am able to update using update library
Attached vi and database for reference
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet
Attachments:
Database Update.zip ‏795 KB

Stick to your old thread please.
[http://forums.sun.com/thread.jspa?threadID=5320704&messageID=10371347#10371347]
I'll delete this one soon.

Problem having a MDB connect to a remote JMS Topic

Hi, I am having problem making an MDB listen to a remote JMS Topic. Here's the
scenario:
Two Weblogic servers (6.1 sp3) running on the same machine (W2K) - they arenot part of a cluster......both are independent servers
One WLS is listening on port 7001 (Domain=WLSDomain1; Target=Server1) and thesecond one on 8001 (Domain=WLSDomain2; Target=Server1 {This is not a typo, the
target is Server1})
In WLSDomain1/Server1, I have a JMS Topic defined as follows (in its config.xmlfile):
<JMSServer Name="EventServicesJMSServer"
Store="ESJMSServerFileStore" Targets="Server1">
<JMSTopic JNDIName="jms/EventServicesTopic7001"
Name="jms/EventServicesTopic7001" StoreEnabled="true"/>
</JMSServer>
In WLSDomain2/Server1, I have a JMS Topic defined as follows (in config.xmlfile):
<JMSServer Name="EventServicesJMSServer"
Store="ESJMSServerFileStore" Targets="Server1">
<JMSTopic JNDIName="jms/EventServicesTopic8001"
Name="jms/EventServicesTopic8001" StoreEnabled="true"/>
</JMSServer>
An MDB is deployed on WLSDomain1/Server1 with the following elements in itsweblogic-jar.xml file (I haven't included the entire weblogic-jar.xml file, only
the relevant info):
<message-driven-descriptor>
<pool>
<max-beans-in-free-pool>1</max-beans-in-free-pool>
<initial-beans-in-free-pool>0</initial-beans-in-free-pool>
</pool>

<destination-jndi-name>jms/EventServicesTopic8001</destination-jndi-name>
<initial-context-factory>weblogic.jndi.WLInitialContextFactory</initial-context-factory>
<provider-url>t3://localhost:8001</provider-url>
<connection-factory-jndi-name>weblogic/jms/ConnectionFactory</connection-factory-jndi-name>
</message-driven-descriptor>
An MDB is deployed on WLSDomain2/Server1 with the following elements in itsweblogic-jar.xml file (I haven't included the entire weblogic-jar.xml file, only
the relevant info):
<message-driven-descriptor>
<pool>
<max-beans-in-free-pool>1</max-beans-in-free-pool>
<initial-beans-in-free-pool>0</initial-beans-in-free-pool>
</pool>

<destination-jndi-name>jms/EventServicesTopic7001</destination-jndi-name>
<initial-context-factory>weblogic.jndi.WLInitialContextFactory</initial-context-factory>
<provider-url>t3://localhost:7001</provider-url>
<connection-factory-jndi-name>weblogic/jms/ConnectionFactory</connection-factory-jndi-name>
</message-driven-descriptor>
After starting both the WLS servers, I've verified that they have made connectionsto each other; the Topics are defined in the JNDI tree of the respective servers;
and the MDBs have been deployed in their respective servers. But the MDBs can't
see/connect to their respective JMS destination. Here's the error message and
stack trace from one the WLS server's trace file:
<Apr 17, 2003 4:58:25 PM GMT> <Warning> <EJB> <The Message-Driven EJB: com.manu.
common.server.objectServices.CSMEventListenerMDB_8001 is unable to connect to
the JMS destination: jms/EventServicesTopic8001. The EJB container will automatically
attempt to
re-establish the connection with the JMS server. This warning may occur during
WebLogic Cluster start-up if the JMS destination is located on another server.
When the JMS server connection is re-established, the Message-Driven EJB will
again receive JMS messages.
The Error was:
weblogic.jms.common.JMSException: Connection not found
at weblogic.jms.dispatcher.InvocableManager.invocableFind(InvocableManager.java:121)
at weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.java:509)
at weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:272)
at weblogic.jms.client.JMSConnection.sessionCreate(JMSConnection.java:268)
at weblogic.jms.client.JMSConnection.createTopicSession(JMSConnection.java:245)
at weblogic.ejb20.internal.JMSConnectionPoller.createJMSConnection(JMSConnectionPoller.java:522)
at weblogic.ejb20.internal.JMSConnectionPoller.connectToJMS(JMSConnectionPoller.java:418)
at weblogic.ejb20.internal.JMSConnectionPoller.trigger(JMSConnectionPoller.java:348)
at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:238)
at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:229)
at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:6
9)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Have you run into a similar problem? Any suggestion?
Thanks,
Farook

Hi, I am having problem making an MDB listen to a remote JMS Topic. Here's the
scenario:
Two Weblogic servers (6.1 sp3) running on the same machine (W2K) - they arenot part of a cluster......both are independent servers
One WLS is listening on port 7001 (Domain=WLSDomain1; Target=Server1) and thesecond one on 8001 (Domain=WLSDomain2; Target=Server1 {This is not a typo, the
target is Server1})
In WLSDomain1/Server1, I have a JMS Topic defined as follows (in its config.xmlfile):
<JMSServer Name="EventServicesJMSServer"
Store="ESJMSServerFileStore" Targets="Server1">
<JMSTopic JNDIName="jms/EventServicesTopic7001"
Name="jms/EventServicesTopic7001" StoreEnabled="true"/>
</JMSServer>
In WLSDomain2/Server1, I have a JMS Topic defined as follows (in config.xmlfile):
<JMSServer Name="EventServicesJMSServer"
Store="ESJMSServerFileStore" Targets="Server1">
<JMSTopic JNDIName="jms/EventServicesTopic8001"
Name="jms/EventServicesTopic8001" StoreEnabled="true"/>
</JMSServer>
An MDB is deployed on WLSDomain1/Server1 with the following elements in itsweblogic-jar.xml file (I haven't included the entire weblogic-jar.xml file, only
the relevant info):
<message-driven-descriptor>
<pool>
<max-beans-in-free-pool>1</max-beans-in-free-pool>
<initial-beans-in-free-pool>0</initial-beans-in-free-pool>
</pool>

<destination-jndi-name>jms/EventServicesTopic8001</destination-jndi-name>
<initial-context-factory>weblogic.jndi.WLInitialContextFactory</initial-context-factory>
<provider-url>t3://localhost:8001</provider-url>
<connection-factory-jndi-name>weblogic/jms/ConnectionFactory</connection-factory-jndi-name>
</message-driven-descriptor>
An MDB is deployed on WLSDomain2/Server1 with the following elements in itsweblogic-jar.xml file (I haven't included the entire weblogic-jar.xml file, only
the relevant info):
<message-driven-descriptor>
<pool>
<max-beans-in-free-pool>1</max-beans-in-free-pool>
<initial-beans-in-free-pool>0</initial-beans-in-free-pool>
</pool>

<destination-jndi-name>jms/EventServicesTopic7001</destination-jndi-name>
<initial-context-factory>weblogic.jndi.WLInitialContextFactory</initial-context-factory>
<provider-url>t3://localhost:7001</provider-url>
<connection-factory-jndi-name>weblogic/jms/ConnectionFactory</connection-factory-jndi-name>
</message-driven-descriptor>
After starting both the WLS servers, I've verified that they have made connectionsto each other; the Topics are defined in the JNDI tree of the respective servers;
and the MDBs have been deployed in their respective servers. But the MDBs can't
see/connect to their respective JMS destination. Here's the error message and
stack trace from one the WLS server's trace file:
<Apr 17, 2003 4:58:25 PM GMT> <Warning> <EJB> <The Message-Driven EJB: com.manu.
common.server.objectServices.CSMEventListenerMDB_8001 is unable to connect to
the JMS destination: jms/EventServicesTopic8001. The EJB container will automatically
attempt to
re-establish the connection with the JMS server. This warning may occur during
WebLogic Cluster start-up if the JMS destination is located on another server.
When the JMS server connection is re-established, the Message-Driven EJB will
again receive JMS messages.
The Error was:
weblogic.jms.common.JMSException: Connection not found
at weblogic.jms.dispatcher.InvocableManager.invocableFind(InvocableManager.java:121)
at weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.java:509)
at weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:272)
at weblogic.jms.client.JMSConnection.sessionCreate(JMSConnection.java:268)
at weblogic.jms.client.JMSConnection.createTopicSession(JMSConnection.java:245)
at weblogic.ejb20.internal.JMSConnectionPoller.createJMSConnection(JMSConnectionPoller.java:522)
at weblogic.ejb20.internal.JMSConnectionPoller.connectToJMS(JMSConnectionPoller.java:418)
at weblogic.ejb20.internal.JMSConnectionPoller.trigger(JMSConnectionPoller.java:348)
at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:238)
at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:229)
at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:6
9)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Have you run into a similar problem? Any suggestion?
Thanks,
Farook

Problem having a MDB connect to a remote JMS Topic (WLS 6.1 sp3)

          Hi, I am having problem making an MDB listen to a remote JMS Topic. Here's the
          scenario:
          > Two Weblogic servers (6.1 sp3) running on the same machine (W2K) - they are
          not part of a cluster......both are independent servers
          > One WLS is listening on port 7001 (Domain=WLSDomain1; Target=Server1) and the
          second one on 8001 (Domain=WLSDomain2; Target=Server1 {This is not a typo, the
          target is Server1})
          > In WLSDomain1/Server1, I have a JMS Topic defined as follows (in its config.xml
          file):
          <JMSServer Name="EventServicesJMSServer"
          Store="ESJMSServerFileStore" Targets="Server1">
          <JMSTopic JNDIName="jms/EventServicesTopic7001"
          Name="jms/EventServicesTopic7001" StoreEnabled="true"/>
          </JMSServer>
          > In WLSDomain2/Server1, I have a JMS Topic defined as follows (in config.xml
          file):
          <JMSServer Name="EventServicesJMSServer"
          Store="ESJMSServerFileStore" Targets="Server1">
          <JMSTopic JNDIName="jms/EventServicesTopic8001"
          Name="jms/EventServicesTopic8001" StoreEnabled="true"/>
          </JMSServer>
          > An MDB is deployed on WLSDomain1/Server1 with the following elements in its
          weblogic-jar.xml file (I haven't included the entire weblogic-jar.xml file, only
          the relevant info):
          <message-driven-descriptor>
          <pool>
          <max-beans-in-free-pool>1</max-beans-in-free-pool>
          <initial-beans-in-free-pool>0</initial-beans-in-free-pool>
          </pool>
          
          <destination-jndi-name>jms/EventServicesTopic8001</destination-jndi-name>
          <initial-context-factory>weblogic.jndi.WLInitialContextFactory</initial-context-factory>
          <provider-url>t3://localhost:8001</provider-url>
          <connection-factory-jndi-name>weblogic/jms/ConnectionFactory</connection-factory-jndi-name>
          </message-driven-descriptor>
          > An MDB is deployed on WLSDomain2/Server1 with the following elements in its
          weblogic-jar.xml file (I haven't included the entire weblogic-jar.xml file, only
          the relevant info):
          <message-driven-descriptor>
          <pool>
          <max-beans-in-free-pool>1</max-beans-in-free-pool>
          <initial-beans-in-free-pool>0</initial-beans-in-free-pool>
          </pool>
          
          <destination-jndi-name>jms/EventServicesTopic7001</destination-jndi-name>
          <initial-context-factory>weblogic.jndi.WLInitialContextFactory</initial-context-factory>
          <provider-url>t3://localhost:7001</provider-url>
          <connection-factory-jndi-name>weblogic/jms/ConnectionFactory</connection-factory-jndi-name>
          </message-driven-descriptor>
          > After starting both the WLS servers, I've verified that they have made connections
          to each other; the Topics are defined in the JNDI tree of the respective servers;
          and the MDBs have been deployed in their respective servers. But the MDBs can't
          see/connect to their respective JMS destination. Here's the error message and
          stack trace from one the WLS server's trace file:
          <Apr 17, 2003 4:58:25 PM GMT> <Warning> <EJB> <The Message-Driven EJB: com.manu.
          common.server.objectServices.CSMEventListenerMDB_8001 is unable to connect to
          the JMS destination: jms/EventServicesTopic8001. The EJB container will automatically
          attempt to
          re-establish the connection with the JMS server. This warning may occur during
          WebLogic Cluster start-up if the JMS destination is located on another server.
          When the JMS server connection is re-established, the Message-Driven EJB will
          again receive JMS messages.
          The Error was:
          weblogic.jms.common.JMSException: Connection not found
          at weblogic.jms.dispatcher.InvocableManager.invocableFind(InvocableManager.java:121)
          at weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.java:509)
          at weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:272)
          at weblogic.jms.client.JMSConnection.sessionCreate(JMSConnection.java:268)
          at weblogic.jms.client.JMSConnection.createTopicSession(JMSConnection.java:245)
          at weblogic.ejb20.internal.JMSConnectionPoller.createJMSConnection(JMSConnectionPoller.java:522)
          at weblogic.ejb20.internal.JMSConnectionPoller.connectToJMS(JMSConnectionPoller.java:418)
          at weblogic.ejb20.internal.JMSConnectionPoller.trigger(JMSConnectionPoller.java:348)
          at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:238)
          at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:229)
          at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:6
          9)
          at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          Have you run into a similar problem? Any suggestion?
          Thanks,
          Farook


FAQ. Naming conflict. To interop between domains make sure:
          All WL Servers are named differently.
          All JMS Servers are named differently.
          All JMS Stores are named differently.
          Tom
          Farook Wadia wrote:
          > Hi, I am having problem making an MDB listen to a remote JMS Topic. Here's the
          > scenario:
          >
          >
          >>Two Weblogic servers (6.1 sp3) running on the same machine (W2K) - they are
          >
          > not part of a cluster......both are independent servers
          >
          >
          >>One WLS is listening on port 7001 (Domain=WLSDomain1; Target=Server1) and the
          >
          > second one on 8001 (Domain=WLSDomain2; Target=Server1 {This is not a typo, the
          > target is Server1})
          >
          >
          >>In WLSDomain1/Server1, I have a JMS Topic defined as follows (in its config.xml
          >
          > file):
          >
          > <JMSServer Name="EventServicesJMSServer"
          > Store="ESJMSServerFileStore" Targets="Server1">
          > <JMSTopic JNDIName="jms/EventServicesTopic7001"
          > Name="jms/EventServicesTopic7001" StoreEnabled="true"/>
          > </JMSServer>
          >
          >>In WLSDomain2/Server1, I have a JMS Topic defined as follows (in config.xml
          >
          > file):
          >
          > <JMSServer Name="EventServicesJMSServer"
          > Store="ESJMSServerFileStore" Targets="Server1">
          > <JMSTopic JNDIName="jms/EventServicesTopic8001"
          > Name="jms/EventServicesTopic8001" StoreEnabled="true"/>
          > </JMSServer>
          >
          >>An MDB is deployed on WLSDomain1/Server1 with the following elements in its
          >
          > weblogic-jar.xml file (I haven't included the entire weblogic-jar.xml file, only
          > the relevant info):
          >
          > ..
          > <message-driven-descriptor>
          > <pool>
          > <max-beans-in-free-pool>1</max-beans-in-free-pool>
          > <initial-beans-in-free-pool>0</initial-beans-in-free-pool>
          > </pool>
          > 
          > <destination-jndi-name>jms/EventServicesTopic8001</destination-jndi-name>
          > <initial-context-factory>weblogic.jndi.WLInitialContextFactory</initial-context-factory>
          > <provider-url>t3://localhost:8001</provider-url>
          > <connection-factory-jndi-name>weblogic/jms/ConnectionFactory</connection-factory-jndi-name>
          > </message-driven-descriptor>
          > ...
          >
          >
          >>An MDB is deployed on WLSDomain2/Server1 with the following elements in its
          >
          > weblogic-jar.xml file (I haven't included the entire weblogic-jar.xml file, only
          > the relevant info):
          >
          > ..
          > <message-driven-descriptor>
          > <pool>
          > <max-beans-in-free-pool>1</max-beans-in-free-pool>
          > <initial-beans-in-free-pool>0</initial-beans-in-free-pool>
          > </pool>
          > 
          > <destination-jndi-name>jms/EventServicesTopic7001</destination-jndi-name>
          > <initial-context-factory>weblogic.jndi.WLInitialContextFactory</initial-context-factory>
          > <provider-url>t3://localhost:7001</provider-url>
          > <connection-factory-jndi-name>weblogic/jms/ConnectionFactory</connection-factory-jndi-name>
          > </message-driven-descriptor>
          > ...
          >
          >
          >>After starting both the WLS servers, I've verified that they have made connections
          >
          > to each other; the Topics are defined in the JNDI tree of the respective servers;
          > and the MDBs have been deployed in their respective servers. But the MDBs can't
          > see/connect to their respective JMS destination. Here's the error message and
          > stack trace from one the WLS server's trace file:
          >
          > <Apr 17, 2003 4:58:25 PM GMT> <Warning> <EJB> <The Message-Driven EJB: com.manu.
          > common.server.objectServices.CSMEventListenerMDB_8001 is unable to connect to
          > the JMS destination: jms/EventServicesTopic8001. The EJB container will automatically
          > attempt to
          > re-establish the connection with the JMS server. This warning may occur during
          > WebLogic Cluster start-up if the JMS destination is located on another server.
          > When the JMS server connection is re-established, the Message-Driven EJB will
          > again receive JMS messages.
          > The Error was:
          > weblogic.jms.common.JMSException: Connection not found
          > at weblogic.jms.dispatcher.InvocableManager.invocableFind(InvocableManager.java:121)
          > at weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.java:509)
          > at weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:272)
          > at weblogic.jms.client.JMSConnection.sessionCreate(JMSConnection.java:268)
          > at weblogic.jms.client.JMSConnection.createTopicSession(JMSConnection.java:245)
          > at weblogic.ejb20.internal.JMSConnectionPoller.createJMSConnection(JMSConnectionPoller.java:522)
          > at weblogic.ejb20.internal.JMSConnectionPoller.connectToJMS(JMSConnectionPoller.java:418)
          > at weblogic.ejb20.internal.JMSConnectionPoller.trigger(JMSConnectionPoller.java:348)
          > at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:238)
          > at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:229)
          > at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:6
          > 9)
          > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
          > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          >
          >
          > Have you run into a similar problem? Any suggestion?
          >
          > Thanks,
          >
          > Farook

When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

Anyone can help to advice how to solve this issue ?

How to read accdb and mdb files using JDBC or File Adapter

Hi,
How to read and extract the .accdb and .mdb files from FTP server and parsing into xml by using FTP or JDBC Adapter in SAP PI7.11 With linx Os.
Regards
Upendra

Hi,
As per SAP note:1681420 i have to install the below driver from Microsoft
Our SAP PI installed under Unxi OS ,how to install the driver (.exe file) .
Driver name :AccessDatabaseEngine_x64.exe
Url:Download Microsoft Access Database Engine 2010 Redistributable from Official Microsoft Download Center
1681420 - PI : Where to locate the JDBC Driver for Microsoft Access
Regards
Upendra

Cannot OpenDatabase (MSAccess mdb file) using VB6 code on windows8 64 bit machine using office 2013.

I have a "mdb" file which is created long back in MSAccess 97 or 2000. I am using Office 2013.
When I tried to open the mdb file from my application using below code written in VB6, It works fine in Windows 7 64 bit machine but It is not working in Windows 8 64 bit machine.
If I use office 2010 again same code works fine in both Windows 7 and 8 64 bit machines.
Set gWork = DBEngine.CreateWorkspace("", "admin", "", dbUseJet)
Set gCache = gWork.OpenDatabase(DataPath & fFilePath & "\connec00.mdb")
I have a referenced "Microsoft DAO 3.51 Object Library" for the code.
I tried changing it to "Microsoft DAO 3.6 Object Library" also but still the problem is not resolved.
Can anyone please help me in figuring this out ??

Dear Bruce,
Thanks for your reply.
Code was written in VB6. My VB6 application will try to open a "connec00.mdb" file and will read the data in it for displaying in the application.
For opening the database by the application the code was written like below
On Error GoTo Herr
Set gWork = DBEngine.CreateWorkspace("", "admin", "", dbUseJet)
FLog.Addlog "File exists: Connecting to database..."
Set gCache = gWork.OpenDatabase(DataPath & fFilePath & "\connec00.mdb")
Herr:
FLog.Addlog "Error(Class_Initialize - DataConnector): " + Err.Description + " in " + Err.Source + Chr(10) + Chr(13) + "Init: Going on execution..."
If I manually open the "mdb" file both in windows 7 64 bit and windows 8 64 bit using MSAccess 2013, I will get the error
"cannot open a database created with previous version of your application".
On Windows 7 64 bit
Through my VB6 code the mdb file is opened (does not launch MSAccess) by my application and reading is done perfectly which inturns helps the application to display the data in the mdb file. (even though manually if I cannot open)
On Windows 8 64 bit
Through my VB6 code the mdb file is not able to open the database by my application.
It is going to Herr: part when it tries comes to that "OpenDatabase" step and it prints nothing in the log (Err.Description )also.
(This is seen only for Windows 8 64 bit) . In Windows 7 64 bit Herr part does not even hit.
Configuration wise I have checked both are same. Please let me know in case of furthur clarification or anything if I miss..
Thanks for your co-operation.

Itunes can not locate my music files.

I have just moved the whole of 'My Documents' to a new internal drive as i was running out of space in the old drive. Then after doing this, i deleted my original 'My Documents' off the old drive.
However, now about 80% of my music all needs locating. This means i would have to locate each individual file of over 2000 songs. This would take years and do not want to do this. (am not sure if this is relevant, but i have my files in various places on the computer, so not all in one folder.)
Have you any suggestions? I would really appreciate your help!
Thanks.

I am experiencing this problem also, I can see all 1336 of my songs, but it only plays about 30 of them. the rest it keeps saying cannot find music. Also It will not connect to the store due to no internet connection...I am always connected via broadband. I can access the store thru the internet but not itunes...please help!!!!!

Cannot Locate the Original File ? ?- Help Please

Hi ,
I have Consolidated my Library to New folder on my External Hard-Drive. so i Know that all my music is in One palce..
I have a Problem, If i try and play a Track, It Now get a message saying Cannot Locate the Original File..& has this ! against the track..???
What has gone wrong ?
Many thanks

Unfortunately I'm in the same boat. Somehow I cannot locate over 30 GB of music that just disappeared?!
Moved the iTunes folder from my Music folder from the HD to my 250 GB external drive. I did not rename it. Kept it the same name. Went into the Advanced folder in iTunes Preferences and chose to use the external drive as my source for music. However, I noted that an iTunes folder always reappeared in my Music folder on the HD. Didn't realize that I had to Consolidate libraries until later on, but did so the next day as I attempted to figured out why it wasn't working ("cannot locate original file"). When I open iTunes, all of my songs and playlists are listed (I assume this is cache), but none will play except for a few random artists (most have "!"). When I go back and look at the actual iTunes Music folder, it has only these random artists listed (I assume these are the (only?) original files?).
Not sure where everything else went when I haven't deleted any iTunes files? I've read quite a few threads with this same problem without any real answers. When I use Spotlight to locate the original songs, I get zero found.
Is there any easy answer as to where my songs went or am I looking at taking this Mac in for some file retrieval.
Many thanks to anyone that can help.

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use cmd+ r when restarting. Is this the right way?

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

Powershell script to search a network drive for .mdb files and export them to CSV file

Hello all,
I'm trying to search one of our network drives for old .mdb files, I want to write the name, location and date last modified to a csv file.
Get-WmiObject -Class CIM_DataFile -Filter "Drive='S:' And Extension='mdb'
AND ObjFile.drive
AND objFile.FileName
AND objFile.FileSize
AND objFile.LastWriteTime" |
Export-CSV c:\mdb_search\mdbfiles.csv\
Obviously this isn't working or I wouldn't be posting. I've tried many different examples from the net with no joy for now.
Thanks for any help you can offer.

Thanks, that did the job.
Cheers, you're welcome.
How do I get the powershell cursor to return to C:> ?
Should I use "exit" or "break" ?
Neither, the console will return to a prompt when the search has been completed.
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

Problems locating my .mdb file

Similar Messages

Maybe you are looking for