Problems with Creating Real-Time InfoCube in BI 7.0

Hello, Everybody,
I try to create Real-Time cube for BW-BPS planning, but when i want to insert a key figure into real-time info cube i get error:
Short dump has not been completely stored(too big)
Exception condition "Node_related_missing" raised.
Could You help me?
Thanks in advance,
Best Regards,
Arunas Stonys

Hi Arunas,
I think you are not on SP10. you may need to implement the SP10 or advance correction as in this note:
Note 968097 - Error in BI metadata maintenance (InfoCube, MultiProvider)
Symptom
Note that the attached corrections cause follow-up errors. You must also implement the corrections from Note 971918.
You are in the maintenance dialog for an InfoCube or a MultiProvider. When you enter new key figures in this provider, a program termination occurs with message "NODE_RELATED_MISSING" in class CL_RSO_DATA_TREE.
This problem occurs because the InfoProvider does not contain a unit dimension yet and the system tries to insert the relevant unit into the unit dimension (that does not exist).
Other terms
Transaction RSA1, RSDCUBE, RSDMPRO
Reason and Prerequisites
This problem is caused by a program error.
Solution
SAP NetWeaver 2004s BI
Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package is available once Note 0914304 "SAPBINews BI 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can implement the correction instructions.
To provide information in advance, the note(s) mentioned above may already be available before the Support Package(s) is/are released. In this case, the short text of the note still contains the words "Preliminary version".
Thanks,
Raj

Similar Messages

MultiProvider with two real-time InfoCubes?

Hi,
I created a multiprovider with two real-time Infocubes. I need to create a formula in FOX editor where I have to update only one InfoCube. Is it possible? If so, I am looking for syntax with InfoCube name in the formula. The KeyFigures have the same names in both InfoCubes.
Any help would be appreciated.
Thank you,
Vidya

Hi Pratyush,
I am using IP. I created Aggregation Level, Filter, etc. It created a characteristic "0INFOPROV" and I used that cha. to read data and to write the data. It did not work.
Here is the problem.
- We have one basic cube (history data: HCUBE) and two transactional cubes (actual data: ACUBE and plan data: PCUBE)
- Created a multiprovider (MULTI) for HCUBE, ACUBE, PCUBE
- Also created Agg level and filter
- Note: Three cubes have the same Key Figure (0Amount)
- Created a planning function and tried something like {KF, PCUBE} = {KF, MULTI} (as suggested by Andrey)
- Task is to read data from HCUBE and ACUBE and only write to PCUBE.
- I am able to read data but unable to write data.
Any ideas?
Thank you,
Vidya

How to create Real Time Infocube in BW

Hi BW Experts,
We got one requirement. We need to create one Real Time Infocube.
Our Users will enter the data in Query Analyzer later.
Please can anyone tell me the step by step.
Is there any settings we need to give..
Thanks & Regards
Anjali

Hi,
Creating a Real-Time InfoCube
When creating a new InfoCube in the Data Warehousing Workbench, select the Real-Time indicator.
Converting a Standard InfoCube into a Real-Time InfoCube
Conversion with Loss of Transaction Data
If the standard InfoCube already contains transaction data that you no longer need (for example, test data from the implementation phase of the system), proceed as follows:
1. In the InfoCube maintenance in the Data Warehousing Workbench, from the main menu, choose InfoCube ® Delete Data Content. The transaction data is deleted and the InfoCube is set to inactive.
2. Continue with the same procedure as with creating a real-time InfoCube.
Conversion with Retention of Transaction Data
If the standard InfoCube already contains transaction data from the production operation that you still need, proceed as follows:
Execute ABAP report SAP_CONVERT_NORMAL_TRANS under the name of the corresponding InfoCube. Schedule this report as a background job for InfoCubes with more than 10,000 data records because the runtime could potentially be long.
Try
http://help.sap.com/saphelp_nw04s/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm
Hope this helps.
Thanks,
JituK

Problems with creating a Time Machine backup on external HDD

Hello!
I tried to make a new Time Machine backup file on my external harddrive today.
Unfortunately it stopt after about 6 or 7 gb with the popup:
''the backup was not performed because an error occurred while copying files to the backup disk. The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk''
I'm certain that the HDD (Western Digital 1Tb) was correctly formatted (Mac Os Extended (Journaled)). It's the same type as my internal harddrive.
I also have a Time Machine Buddy logfile. Maybe that will help in finding the problem.
Also noticable is that after the backup failure, I can't seem to restore or format the external HDD. Once I connect it to a regular pcc and remove and reinstall the driver, I can use it again.
here is the logfile from the latest backup try:
Starting manual backup
Error determining directory contents for /Volumes/Time Machine: Error Domain=NSCocoaErrorDomain Code=256 "The file “Time Machine” couldn’t be opened." UserInfo=0x7faa73422f70 {NSFilePath=/Volumes/Time Machine, NSUserStringVariant=(
Backing up to: /Volumes/Time Machine/Backups.backupdb
Error -36 applying backup protections to /Volumes/Time Machine/Backups.backupdb/MacBook Pro van Rolf Perdok
Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine/Backups.backupdb/MacBook Pro van Rolf Perdok size:37
Error -36 applying backup protections to /Volumes/Time Machine/Backups.backupdb/MacBook Pro van Rolf Perdok
Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine/Backups.backupdb/MacBook Pro van Rolf Perdok size:37
Backup failed with error: 2
Thanks in advance!

And I spoke too soon, backup just failed with:
22/10/2012 15:44:24.266 com.apple.backupd[555]: Stopping backup.
22/10/2012 15:44:24.267 com.apple.backupd[555]: Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Invalid argument
22/10/2012 15:44:24.267 com.apple.backupd[555]: Error: (-47) SrcErr:NO Copying /Applications/Xcode.app/Contents/Developer/Documentation/DocSets/com.apple.ADC_ Reference_Library.DeveloperTools.4_5.docset/Contents/Resources/Documents/recipes /xcode_help-project_editor/Art/BuildingTargetsintheCorrectOrder.m4v to /Volumes/Storage/Backups.backupdb/cizin/2012-10-22-152514.inProgress/ED608989-4 CF3-4713-8E62-3A32E8CC3917/Cizin/Applications/Xcode.app/Contents/Developer/Docum entation/DocSets/com.apple.ADC_Reference_Library.DeveloperTools.4_5.docset/Conte nts/Resources/Documents/recipes/xcode_help-project_editor/Art
22/10/2012 15:44:28.221 com.apple.backupd[555]: Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Invalid argument
22/10/2012 15:44:28.222 com.apple.backupd[555]: Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Invalid argument
22/10/2012 15:44:28.222 com.apple.backupd[555]: Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Invalid argument
22/10/2012 15:44:28.222 com.apple.backupd[555]: Copied 249786 files (10.64 GB) from volume Cizin.
22/10/2012 15:44:28.222 com.apple.backupd[555]: Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Invalid argument
22/10/2012 15:44:28.222 com.apple.backupd[555]: Copy stage failed with error:11
22/10/2012 15:44:31.231 com.apple.backupd[555]: Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Resource busy
22/10/2012 15:44:34.239 com.apple.backupd[555]: Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Resource busy
22/10/2012 15:44:34.239 com.apple.backupd[555]: Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Invalid argument
22/10/2012 15:44:34.358 com.apple.backupd[555]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Storage/Backups.backupdb/cizin size:37
22/10/2012 15:44:44.739 com.apple.backupd[555]: Backup failed with error: 11
Time fo a bug report.

How to create real time chart with candle stick for displaying Open, High, Close, Low values from BSE/NSE EOD data

Please help with sample windows form C#.Net Example

Hi Goutam,
Please refer to the following link with examples: http://www.codeproject.com/Questions/234865/create-real-time-chart
Hope this helps you!
Regards,
Mitch!

Remote Extractor and Real Time Infocube for SEM BCS

Hi Experts,
I have somes doubts about the integration between SEM and BW.
There is a cycle that have the next processes:
1.- begin in R/3 with the movements in FI, CO and/or general ledgers
2.- Activate the extractors standards for replicate/extract data to BW. For example, 0FI_GL_XXXX.
3.- Configure a method for take the information from BW to SEM.
4.- My doubt begin here... For take the information from SEM to the real time infocube, where I configure? What Have I for configure?
The real time infocube, What is the proposal? Where take the data? Here, Do the remote extractor begin to apply?
Thank you very much for your collaboration.
Regards,
Jeysi Ascanio

We're using 0FI_GL_20 to read directly from FAGLFLEXT into SEM-BCS via a BI remote cube. There are some basic transformations in BI to "populate" the remote cube, then a standard Load from Data Stream in BCS to do final mappings. In the BCS workbench, just create a source data basis off the remote cube.
This works at my current project due to fairly low ECC data volumes. If you are doing any complex mapping on the Company or Fiscal Year / Period infoobjects, you may need to create a inverse mapping routine in the remote cube to transfer selection criteria. If you see messages in the monitor following a data load such as "xx,xxx of xxx,xxx records ignored", that means that you are reading too much data from ECC and it is only getting filtered on the BCS side. We had this problem with a custom extractor and adding an inverse mapping routine cut the load from ~5min to 30sec. (Basically, the custom, template-delivered, extractor only had 0FISCPER, not 0FISCPER3 and 0FISCYEAR, so we would read all 17 K4 periods into BI, map them into BCS, then BCS would throw out the unneeded periods. Unfortunately, we did not have the option to change the extractor, so this was the best approach.).
If I had large data volumes, I would use a regular BI basic cube for staging (or possibly a multi-cube with a mix of basic and realtime, depending on the load requirements to BCS).
If you use 0FI_GL_20, I would strongly recommend you implement OSS Note 1245822, or be on SAP_APPL 603.0002 or later.
Hope that helps,
- Chris

How to copy data from a Input query to real time Infocube

Hi All, I need some help on IP related stuff. The details are as below:
I am using two real time infocubes and one Multiprovider on them.
First Infocube u2018PRODUCTu2019 with the following Objects:
Product Group ,Product,Region ,Fiscal Year , Fiscal Year Varient ,0currency
Gross Sales
Second Infocube u2018C_PRODUCT u2018 with the following Objects:
Product Group ,Product,Region ,Fiscal Year , Fiscal Year Varient ,0currency
Gross Sales and Forecast Sales
( u2018Forecast Salesu2019 in the extra object in the second Infocube. Remaining objects are same in the both the cubes)
First Infocube u2018Productu2019 has data but the second cube does not have any data.
I have created a Multiprovider ZMulti and in that I have included these two cubes. On this Multi Provider, I have created a Aggrigation Level(The details of the aggregation level is provided in the next page).
On this Aggrigation level I have built a Input Query by which I run the report.
(In the Rows area, I have taken Product Group, Product, Region and Fical year.
In the Key Figure section, I have taken Gross Sales and Forecast Sales( which is part of the second Infocube C_Product). These two Key Figures are made Input as Input ready. And the Query is Input ready query. In the Filter, I have taken Fiscal Year Variant. )
Data available in the first cube and no data currently in the second cube. Now executed the report and report displayed information from the first cube.
EX:
Product     Product     Region          Year     Gross Sales     Forecast Sales
Group
PG01           Beer           North           2008           10000           u2026u2026u2026
PG01           Beer          South          2008          20000           u2026u2026u2026
PG01          Beer          East          2008          15000           u2026u2026u2026
The second column is empty and there is no data for the Forecast sales Key Figure in the column.
Things look OK till the above.
Now based on the Gross Sales, I am entering forecast Sales values and I need to save the entire record to the second cube.
For this in the report, I have given the Forecast sales values in the second column and right clicked the mouse and form the menu which I got, selected the u2018SAVEu2019 Option to save the data. For some time, I can see u2018Processingu2019 message and later values at u2018Forecast Salesu2019 are disappearing.
Data is not saving to the cube second cube.
====================================================
Am I missing any thing?
In the Query, Do I need to provide InfoProvider and restrict it to specific value?
In the query, Do I need to include, 0currency object?
Could you please guide me on this?
=============================================
Details of the Aggrigation level.
            I have created an Aggrigation Level ZAL_Prod on MultiProvider.
            Selected all the objects and activated.
            In the Filter, I have taken 0Fiscal Year Variant and saved it.

Restrict Forecast sales to the Plan cube in the Query.
that should fix it.

Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q with a real time mode but it is not working but when i run it with uploading it into the PXI it save in to the file

Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
Attachments:
PWMs.vi ‏130 KB

other problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

Apple ID FAQ http://support.apple.com/kb/HE37

Problem with create universe on Business Objects XI 3.1 base on SAP Query

Hello,
I have a problem with create universe on Business Objects XI 3.1 base on SAP Query.
The problem is hierarchy. Massage on Busines Objects is :
OWBS_ELEMT__ISTKOSZT(cube ICPC01/BEX_ICOC01):Exception condition "HIERARCHY NOT FOUND" raised.(WIS 10901)
Query in BEX run OK.
Best regards.
Ela.

Hello,
Thanks for response.
When I run BEX QUERY, all works OK.
All hierarchies was created and activated on system BW.
This situation appears after upgrade BW to SAP NetWeaver 7.3.
Before upgrade I created universe without any problems.
Regards Ela

Problem with creating new user in portal = portlet is not visible

Hi,
I've got a problem with creating new users in portal. In the Administer tab of the builder is the user portlet not visible.
How can I make this portlet visible?
Please Help
thank you...
Gilbert

Hi..my problem slightly similar.
I created one new user, and didn't select anything from "Public Groups Assignment" and "Privilege Assignment" for him.
I expect the user will be a public user.
But, when he try to logged in the portal,
He cannot see all the PORTLETS related to database values..
All he can see just LINKS -that all in my portal right now beside the report from database that the user cannot see :)
So, what did i do wrong?
Plz Advise, and thanks.

HT1222 Having problem with Notes at time will not record dictation on iPhone?

Having problem with Notes at time will not record dictation on iPhone?

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that doesn't help have your phone examined by an apple technician. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

How come you can not use more than 126GB of a 1.5TB diskdrive with LabVIEW Real Time?

How come you can not use more than 126GB of a 1.5TB diskdrive with LabVIEW Real Time?
This is only 8.3% of the available disk drive space!
http://digital.ni.com/public.nsf/allkb/E7E2F5657B6026358625750B007201A6?OpenDocument
National Instrument's solution is either reformat you drive to less than 126GB or replace the drive with one less than that size.
Please NI, tell me you are going to fix your LabVIEW Real Time soon, and that we won't have to wait for LabVIEW RT 9.2.1 in 2011 for this one to be fixed.
http://upload.wikimedia.org/wikipedia/commons/9/90/Hard_drive_capacity_over_time.svg
Drives as large as 126GB or more have been around since about mid 2002. That's about 7 Years now and LabVIEW Real Time STILL can't use drives larger that 126GB! Please NI. Do something.
We deserve fixes to the old versions of LabVIEW RT. How about updates to LabVIEW RT. Such as 7.0.2, 7.1.2, 7.6.2, 8.0.2, 8.2.2, 8.6.2.
We don't need new features or versions of LabVIEW RT such as 9.0 until we have some of bugs fixed in the existing versions.
Kevin.
Message Edited by kmcdevitt on 05-29-2009 03:39 PM
Solved!
Go to Solution.

Coq rouge wrote:
NI is not making the Real Time OS in house. I do not remember which firm that is making it. Anyway you are allowed to use a hard drive that has been partitioned. And 126GB is some space is it not? I remember Bill Gates declared one time that 640Kb ram should be more than enough for any PC application also in the future
Coq Rouge (formerly t06afre),
The RealTime OS is an NI Product that is purchased from NI.
NI may or may not outsource design, developement, or manufacturing of the products that it sells under its own Company name.
For this reason I would be concerned if I were a PXI Embedded Controller designer/developer in the United States.
Yes, 126GB is some space. I see that there are now 2TB drives available. 126GB would be 6.3% of a new 2TB drive. Should we all be happy with being able to use 6.3% of the available drive space. Moore's Law seams to be alive and well. Drives larger than 126GB have been readily available for 5 or 6 Years. This should not be a surprise to NI. Why don't they do something about it.
Thanks for the trivia on Bill Gates. I must have missed that one since I don't try to keep up with Microsoft. I believe that he is a wonderful person and he and his family are doing wonders for the world in their "retirement". The world needs more like him.
What I do remember is Steve Jobs telling us that we would never need more that 128MB and that we would never to need to do anymore software development because everything was already in the "ToolBox".
McKevin.

Synchronise time in array with the real time from computer

i need help in syrnchonising my array and the real time running in my computer
As stated in the text file attached,
12:32:30 AM 0.38 1.14
2nd column is wind speed, 3rd is gust speed.
i would like to display the wind speed in a gauge with the right values. like for example, at 12:32:30 AM OF REAL TIME, NOT BASED ON THE TEXT, i would like to display the 0.38m's of wind speed in the gauge.
how do i sync the time in array with the real-time?
i have attached a program i made so far. its abit messy. im still a student, need a lil help
Attachments:
Wind Speed and Gust Speed.txt ‏13 KB
Time and MaxMin.vi ‏18 KB

wali123 wrote:
wat u mean duplicate?
Don't continually post the same question over and over. If you have new information, add it to the original thread. Did you actually click the link under the word "duplicate"?
Chopping up a discussion about the same thing into several threads (like here is this thread, but also here and here) serves no useful purpose. It will not increase the chance of a good answer, in fact most people will simply ignore it.
Imagine if everybody else would post like you! Every discussion would be if three different places and we would have three times more threads.
LabVIEW Champion . Do more with less code and in less time .

Can I use third party DAQ boards with Labview real time?

I have an Adlink DAQ 2010 card that I curently use with labview. Will this card also work with Labview real time? What requironments are there for 3rd party cards to work with Labview real time?
Thanks!

Hello George,
Here is a great link for you to take a look at: Can I Use a Third-Party Device with LabVIEW RT?
Have a great day,
NathanT

Problems with Creating Real-Time InfoCube in BI 7.0

Similar Messages

Maybe you are looking for