Problems with Image Disk, fantom CD on desktop and DVD burning

Hello,
I met the last days a lot of problems related with logical volumes.
1) image disk which refuse to disapear when unmount
2) CD which are duplicate once burnt (the both icons disaperar when one is ejected)
3) Servers (anonymous ftp) who stays on desktop after disconnection
4) DVD burning which begin with the message of the end : « completion of engraving » (in french : « finalisation de la gravure ») and the process abort.
5) Asking information about the DVDs: they contains 1,3Go of data (they are new Verbatim DVD-RW!).
If somebody have an idea…

Hello and welcome to Apple Discussions.
1) If you are using a file or application that resides on the Disk Image then it will not unmount.
2) If you burn 2 "sessions" with software like Toast you can end up with two CD icons that both eject when you take the single disk out. This is normal.
3) ?
4) and 5) Try burning disks at a lower speed and use media that is suitable for the older drives the iMac G4 has. You shouldn't be using 16x media.
regards
mrtotes
Bonjour et bienvenue aux discussions d'Apple.
1) Si vous employez un dossier ou une application qui résident sur l'image de disque puis il ne démontera pas.
2) Si vous brûlez 2 « des sessions » avec le logiciel comme pain grillé que vous pouvez finir vers le haut avec deux icônes de CD ces tous les deux éjectent quand vous enlever le disque simple. C'est normal.
3) ?
4) et 5) disques d'essai brûlants à une vitesse inférieure et emploient les médias qui convient aux commandes plus anciennes l'iMac G4 a. Vous ne devriez pas employer les médias 16x.
respect
mrtotes

Similar Messages

Problems with image disk from Idvd

Hi everyone, I've burned some Idvd projects, and before throwing those projects to the trash, i've saved them as an image disk.
Today, when I burn image disk, it burns, but when I play it on a dvd deck the movie doesn't exist.
When I check on my Imac, it shows me the dvd with a file burned on it, but doesn't play like a dvd.
What's going on ?
Thanx for answering
Steve

OK OK I've forgotten to use the "search" option.
I think I've found the answer, I HAVE TO USE DISK UTILITY to burn an image disk, and not :
Open the new dvd
drag and drop the image disk to burn
and click the "burn" button on the top right of the window.
Grrrrr
Here is a post with the answer.
http://discussions.apple.com/thread.jspa?messageID=7907583&#7907583
Sorry for the inconvenience
steve

Disk Copy 6.3.3 reports problem with image - but not always

I have run across a problem with Disk Copy 6.3.3 that looks to me like a bug of some sort, but I can't be sure and want to see if anyone has any additional information. I am running Mac OS 8.1 on a Quadra 950, just in case it is important.
I have saved almost all my old installation floppies as Disk Copy images and now use these images if I have to reinstall software due to failures of several original media. I recently had reason to reinstall software that was stored on multiple disk images and I could never mount them all without receiving the following error after some of the disks were mounted:
+There is a problem with the disk {whatever the disk name is}.+
+Some information may have been lost.+
+Check any recently-used files for data loss, and use a+
+disk-repair program on the disk.+
After further investigation, I found that this problem not only affected this set of installation disks, but others as well. To make a long story short, I have found that I have at least two Disk Copy images that are causing this behavior. I have dozens of other images and they all mount successfully UNTIL I mount one of these two image files (there may be others, but I know of at least two at this time). After I mount either of these two images, many (I estimate more than 50%) of the other images seem to mount, but the message above appears after the mount completes. Some of the images seem to mount without errors, even after one of the two problem images are mounted. Unmounting the problem image does remedy the problem. The only way to mount images without errors again is to reboot.
Has anyone seen this before and have any additional information? In particular I would like to know if I can trust the images that are giving me problems - in particular the two that are causing this situation, but also the ones that indicate data corruption? I'd also like to know if there is a real fix for this problem? If the data in these images is not corrupt, I could make floppies from them every time I want to reinstall software, but I'm not sure the data is good and I really don't want to have to try to find floppies just for an occasional reinstall. Thanks for any help!

Well, I've got some additional information. I have a Macintosh LC running 7.5.5 that also has Disk Copy 6.3.3. I didn't copy the image files to the LC, but instead mounted them over the network, in a half-hearted attempt to rule out issues with disk I/O errors causing this problem. All images mounted without any errors. This pretty much eliminates any problems with the disk image itself being corrupt or with it being a problem with the content of the disk image causing a problem with Disk Copy 6.3.3.
I had been having some signs that my current system disk on the Quadra may be ready to fail, so I added another disk, formatted it, and installed a fresh install of 8.1 on it. Before doing much of anything to customize the installation (no software other than on the 8.1 install disk, almost no settings other than the default, etc...), I tested the images again and they failed again. This eliminates any problems with third party software that I had installed previously. I even booted with extensions disabled and still got the error message.
When I look in the Disk Copy log file, there are NO signs that any errors have ever occurred. This leads me to beleive that the message I'm seeing is not the fault of Disk Copy, but either the System or the Finder. My best guess right now is that once the image file is mounted by Disk Copy, that it is asking the System/Finder to do something that is either failing and produces the error message, or is returning an unexpected return code and causing Disk Copy to produce this message (which for some reason isn't being logged). If nobody has any clues from the additional information, I'll try reinstalling again with only a minimal install and see if I can figure something out. Thanks for any help that anyone might have!

Experiencing problem with image display in LR5

I have an intermittent problem with images displaying and exporting in LR. It just began a couple of months ago and is totally random - will do it with RAW (CR2) or JPG. It displays this way in all modules - Library, Develop, Slideshow....The image displays fine in a non-Adobe image viewer (Faststone or Windows Viewer). I've reloaded LR5 and PSCC and is still persists. I know the image file is fine. It also has begun effecting older images that were showing up just fine a while ago. I just loaded about 200 images and maybe 3 or so have this viewing problem in LR & PS. Has anyone else experienced it and have a suggested fix? My graphics card has the latest drivers and shows no problems with other applications. Here is the same image - one a jpg export from Lighroom, the other a save as jpg from Faststone. HELP!

This is almost always a hardware problem, causing corruption of the file. The difference you see between Lightroom and other software is that Lightroom is accessing the full RAW image, while the other software is trying to read the embedded JPG preview.
To figure out exactly what hardware is the problem, you need to try different transmission paths and hardware ... different camera cards, different card readers or USB cables/USB ports, different hard disks, etc. Eventually you should be able to isolate the problem.

Problem with Image file

Hi,
Iam facing with one problem.I have one swing interface through which I can upload files(back end servlet programme).Now I can upload all types of file but problem with image file it uploading perfectly that means size of the uploaded file is ok but its format damaged.It can not be open.My backend servlet programme is ok coz i tested it with html form it is working perfectly.Problem with swing interface.Plz guide me where I done a mistake.Below r my codes:-
ImageIcon Upload=new ImageIcon("images/Upload.gif");
     Button=new JButton(Upload);
     Button.setToolTipText("Upload");
Button.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
          int returnVal = fc.showOpenDialog(ActionDemo4.this);
          if (returnVal == JFileChooser.APPROVE_OPTION) {
          File file = fc.getSelectedFile();
String aa=file.getAbsolutePath();
          textArea3.append(aa);
               textArea2.append("Local URL:");
long l=file.length();
          try
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff);
          String str1=textArea10.getText();
url = new URL ("http://127.0.0.1:7001/servletUpload?x="+str1);
     urlConn = url.openConnection();
     urlConn.setDoInput (true);
     urlConn.setDoOutput (true);
     urlConn.setUseCaches (false);
     urlConn.setRequestProperty("Content-Type","multipart/form-data;boundry=-----------------------------7d11e410e500f2");
     printout = new DataOutputStream (urlConn.getOutputStream ());
String content ="-----------------------------7d11e410e500f2\r\n"+"Content-Disposition: form-data;"+"name=\"upload\"; filename=\""+aa+"\"\r\n"+"Content-Type: application/octet-strem\r\n\r\n\r\n"+conffile+"-----------------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);
printout.flush ();
printout.close ();
Best Regards
Bikash

The errors are here:
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff); (conffile is a String object containing the image)
and here:
String content ="-----------------------------7d11e410e500f2\r\n"+"Con
ent-Disposition: form-data;"+"name=\"upload\";
filename=\""+aa+"\"\r\n"+"Content-Type:
application/octet-strem\r\n\r\n\r\n"+conffile+"--------
--------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);conffie is sent to the server but
it's non possible to treat binary data as String!
Image files must be sent as byte[] NOT as String ......

Problem with images opened in Photoshop CS 5

Hi, I have a problem with images that I open in Photoshop CS 5. F. ex. I opened
the following image:
The image appears with a purple color in Photoshop. If I hover over the image
with a tool like lasso, it temporarily regains it´s original color. The image mode is RGB Color, 8 Bits/Channel.
I resetted the start settings of Photoshop with the CTRL-Shift-Alt-combination, which had no effect.

The confusion arises from the imprecise error message in the Preferences > Performance dialog box, to wit:
OK, that seems to be open to misunderstanding indeed.
The video card: Citrix Systems Inc. Display Driver.
Could not find a list for CS6 specifically, but the card may fall short.
http://helpx.adobe.com/photoshop/kb/tested-video-cards-photoshop-cs5.html
If I invoke View > Proof Colors, the only thing that changes is that the text in the brackets
Also if you set View > Proof Setup to something different?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

Problem with image url

Hello,
today I have a problem with image url. I wanted Image to change when mouse dragged over it. But nothing happened. Any ideas?
def maxIco: ImageView = ImageView{
image: Image{
url: "{__DIR__}ikony/max.png"
onMouseDragged: function(event: MouseEvent){
maxIco.image = Image{
url: "{__DIR__}ikony/max2.png"
}

This is working for me:
src/main/Main.fx
src/main/icon/image1.bmp
src/main/icon/image2.bmp
//Main.fx
package main;
import javafx.stage.Stage;
import javafx.scene.Scene;
import javafx.scene.image.Image;
import javafx.scene.image.ImageView;
import javafx.scene.input.MouseEvent;
var changed = false;
def imgView: ImageView = ImageView {
    image: Image {
        url: "{__DIR__}icon/image1.bmp"
    onMouseDragged: function (e: MouseEvent): Void {
        if (not changed) {
            imgView.image = Image {
                url: "{__DIR__}icon/image2.bmp"
            changed = true;
            println(imgView.image.url);
    onMouseReleased: function (e: MouseEvent): Void {
        imgView.image = Image {
            url: "{__DIR__}icon/image1.bmp"
        changed = false;
        println(imgView.image.url);
Stage {
    title: "ImageTest"
    scene: Scene {
        width: 700
        height: 600
        content: [
            imgView
}I've changed few things to switch image only one time on mouseDragged event.
It print the image URL.

Problem with Image.createImage()

Hi all!
I'm writing a simple midlet just to display an image on the screen and I'm having some problems with Image.createImage()
Here is my code
Image bg_img;
ImageItem imageItem1;
imageItem1 = new ImageItem("", null,ImageItem.LAYOUT_DEFAULT, "");
try{
bg_img = Image.createImage("/image.png");
imageItem1.setImage(bg_img);
catch(java.io.IOException e){
e.printStackTrace();
I'm getting an exception on bg_img = Image.createImage("/image.png");
I can't understand what is it...:(
I know for sure that the problem is not "file not found"
Any one can help me???

If you are catching IOException, then u may have problem with ur image path. "image not found on the specified path." if ur image is not in the current directiry then put it into current directory. otherwise, If u are using resouce folder and it is already included into the resouce path, then put ur image in that folder..try this..
Still not get, then please give some detail about ur development toolkit. and ur apllication packaging scheem. are you using ANT?
Pranav

Problem with image gallery

Hi to all.
With ios 5.01 I have a little problem with image gallery. As you can see I have only 1 image, but there is always this **** message "download 0 of 46) (sorry, but I'm Italian )
I've removed my icloud account from settings, but there is nothing to do, this message don't goes away. What I can do? Thanks in advance

Hello,
Just adding a gallery I want to do the same slideshow WoodWing's, but in InDesign, if anyone knows of?
Thank you
Link video slideshow WoodWing's: http://www.youtube.com/watch?v=Xt6gNaEZ0-M&feature=relmfu
The first slideshow shown

Problems with image scaling

I'm facing a real problem with image scaling
I've used several algorithms but it all has defects but the most common thing is the out of memory error after several enlargments...
does any one know a solution...
note:
I've used several packages to do so,but I'm looking for a solution from the jdk itself
JAlexscorpio

Did you take into account that the getScaledInstance() -method creates a completly new Image?
So if you use it like in
ImageIcon icon1=new ImageIcon("Blah.gif");
ImageIcon icon2=new ImageIcon(icon1.getImage().getScaledInstance(400,400,SCALE_FAST);
you will end up with 2 different Images which have their own data and memory requirements.
even if you use something like
ImageIcon icon1=new ImageIcon("Blah.gif");
Image i=icon1.getImage();
icon1.setImage(i.getScaledInstance(200,200,SCALE_FAST));
You will need enough memory to store the data for the original image, as well as the data for the scaled
version of the image, at least for the time that it take the JRE to create the scaled version. You never know when the garbage collector kicks in to delete you old data so it could be that this takes some time and until
that moment your memory is not available. If your now doing several of the scaling operations, and there is no chance for the garbage collector to do its work, you will run out of memory.
I hope that might help, if not feel free to post again

Problems with Image Variants

I got two problems with Image Variants:
1. catalogCache.GetImagePath("Images", id) doesnt work for some id. The error message is GetImageVariant error.
2. catalogCache.Preload("Images", Original)
    catalogCache.Preload("Images", Thumbnails)
    catalogCache.Preload("Images", null)
   catalogCache.Preload("Images", "")
get failed, the status code is -2147483647
Anyone know how to setup image variants?
Thanks.
Forrest

status code: -2147483647 is RC_BADPARAM.

Copy and Paste Problems with Images

I'm having the strangest problems with images. I copy an image off of the web for one of my art history classes and I go to paste into another program but, whether it's Keynote, Powerpoint, Photoshop, or Graphic Converter, something always goes wrong: the images definitely lose some of their quality, become brighter in appearance, and get jagged on the edges. This is starting to drive me nuts, especially since it never happened in 10.4 on my iBook G4. Any suggestions?

Make it an 8-bit file (Image menu > mode).

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

I think that may be a consequence of the email provider she is using. Some services (AOL is one example) inspect and modify email attachments, particularly photos, resulting in reduced resolution compared to the email that was sent.
The iPod does not do this. The resolution of the picture in the email she receives will be identical to what is imported.

Is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

I had been having a similar problem on Lion with Safari pdf files despite downloading the latest Adobe Reader XI.
I would constantly get the same messages - There was an error opening this document. The file is damaged and could not be repaired. And I would get a blank page when I tried to print the pdf if I tried printing from the Safari web page using File - Print from the top toolbar on my laptop.
Then I came across the grey Safari lozenge with action icons.
This allowed me, without downloading the pdf, to print the pdf file direct from the Safari page by using the Print icon on the grey lozenge that appears centrally three quarters down the screen.
Then I discovered that if I save the pdf using the Save icon from this same grey lozenge on the Safari page I can open and print this pdf version from my desktop.
I've tested it with a couple of different pdf files and these methods work using the grey lozenge icons but the same pdfs files don't work using File - Save As on the Tool Bar.

Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

- Go to Settings>General>Usage>Storage>and under apps select FBM and try to delete it.
Next:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Problems with Image Disk, fantom CD on desktop and DVD burning

Similar Messages

Maybe you are looking for