Problems with integrated video files, some videos working, others not

Hello,
I have pdf files where video clips are integrated. Most of them are in the AVI container format with FFODIVX codec and without audio. These can be played within the pdf file.
I tried to convert the video clips that are not working to the same format and also to many different other codecs and combinations of codecs. But it didn't help. Some clips are just not working. Are there any additional limitations that I have to consider. Or does anybody has an idea, what the problem could be?
Best regards and thanks in advance,
Daniel N

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

Similar Messages

  • The error, "Restart Required. Lightroom has encountered a problem with its menus. Some menu commands will not work until Lightroom has been restarted" appears in Lightroom.

    I updated to 5.7 a few days ago and I just now encountered this problem while importing some photos. Is this a common problem?

    Hey Guy's, Thank you for the recommendations to fix his problem and I did restart my browser, etc.. and all was corrected. But, I have been with Lightroom for a while, starting with LR3. I can not remember having one problem, except for my errors, until I started with LR5 and I have some kind of problem hourly! I do not have many presets or plug-ins so I don't think that was really a problem. It crashes constantly, I can edit 4-6 photos and then it starts slowing down and I have to do a restart. It does, on occasion, jump around from the develop controls and even changes modes, crashes and sometimes I just wait it out and it will open in the print mode or slideshow! I find photos all over my computer that it sent on its own. I did download and check for malware and other viruses and none were found so I am still troubleshooting everything from my fairly new computer and everything else but I always think when they come out with a newer version to download, it will correct my problems but they only get worse.

  • Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use  cmd+ r  when restarting. Is this the right way?

    Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r  when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

    Your Mac runs maintenance in the background for you.
    Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
    No idea why that was suggested.
    You may have a third party video player installed that's causing an incompatibility issue.
    Check these folders:
    /Library/Internet Plug-Ins/
    /Library/Input Methods/
    /Library/InputManagers/
    /Library/ScriptingAdditions
    ~/Library/Internet Plug-Ins/
    ~/Library/Input Methods/
    ~/Library/InputManagers/
    ~/Library/ScriptingAdditions
    The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
    To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

  • Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

    Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

    haben
    From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
    A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
    Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
    User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
    presets there for the QuickTime choice there.
    What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30)  or something else? Do you know if this camera is recording with a variable or
    a constant frame rate?
    Please review and consider and then we will decide what next.
    Thank you.
    ATR

  • Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

    please help problem with importing a file error output "there was an error decompressing audio or video"

    this is related to what adobe program/version?

  • I'm having problem with exporting video from premiere pro cc 2014

    I'm using Adobe Premiere Pro CC 2014 and I'm having problem with exporting video.
    When I click Export and media, the window for exporting appears and it starts exporting video.
    But after a few minutes, it looks like it has completed exporting video and says there's a bug in exporting.
    It literally says it has a problem with compiling, but I don't know what the real problem is.
    I tried many things like restarting computer and Premire Pro but it's no use.
    But it works when I use Adobe Media Encoder CC 2014 for exporting video.
    If anyone knows any possibilities about why this problem happens, please let me know.

    I'm having a similar issue.  When I go to export my project, I add it to the render queue, set it up with the h.264 settings that I've used with countless past versions of the program, and then hit render.  Randomly, at some point in the process, the render just stops and the ETA just keeps climbing.  I actually had to save an XMF file of the CC 2014 project and bring it into the previous CC version of Premiere just to finish it.  Even a clean re-install of CC 2014 doesn't work.

  • Itunes 7.0.1 still has major problems with jerky video

    I thought the newest update to Itunes 7 would fix my problems with jerky video that have begun since this Itunes 7 came out. At first I thought maybe my computer was too old (powerbook 12" 1.5 Ghz, with maxed out RAM) to play the new resolution, but then I realized that even my old TV shows had jerky playback. It doesn't seem to matter what size. The audio works fine, but the video freezes every few seconds. This is not really acceptable and I'm thinking about uninstalling Itunes 7 until apple issues a fix that address this video playback issue. Anyone have any suggestions or heard anything? Thanks!
    - Tpetdoctor

    I located the problem of the jerky (1 to 2 frames per second) video that started after updating to iTunes7 and 7.0.1!
    Dragging (copying) the file "ATIRadeon9700GLDriver.bundle" from system/library/extensions/ to the desktop and deleting it from the extensions folder (or else simply deleting it and then dragging it from the trash to the desktop) returns normal smooth video to non-H.264 mpeg video on my second generation iMac (ATI Radeon 9600). Unfortunately, this also makes Coverflow stop working with the message "iTunes is unable to browse album covers on this computer". I'm not sure what else will be disabled by moving this file.
    Obviously, this is not a solution, or even a feasible workaround. Where can I get a "good" ATI driver? I went to the ATI site "https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&fold erID=27" and tried installing "macosx-ati-displays-4-5-7.dmg", but to no avail.

  • Memory leak problems with loading videos over and over.

    I'm having memory leak problems with loading videos into a VideoPlayer aswell as FLVPlayback.
    What the flash should do:
    - Should be running for 7 days without having to restart the projector.
    - Interface that shows people around a 360 3D model with 5 different parts and at the stops it makes during the rotation you can click to zoom in on a location which plays a movie for that aswell.
    - Shows a video out of 5 parts for a 360 rotation in 3D in mp4 video (added each time and cleaned up, see code below).
    - Still images are used when the video clips are done playing (MovieClip in stage).
    - Should run automatically when there is no user interaction for X minutes.
    What the problem is:
    - The flash (as a exe and swf i guess) starts to consume memory over time (say 10 hours) until the projector crashes. This usually at around 1.75 GB of memory.
    I cannot see why the Flash cannot garbage collect this and free up the memory. Mabye there is something I don't understand about the garbage collection in flash?
    Here is some code from the video loading and playing:
    var fVideo:VideoPlayer;
    VideoCreate();
    function VideoReady(pEvent:VideoEvent):void
    trace("VideoReady()");
         // start playing video
    fVideo.play();
    function VideoLoad(pUrl:String):void
         trace("VideoLoad(" + pUrl +
         VideoCreate();
         if (pUrl != "")
              if (fVideoFolder + pUrl == fVideo.source)
                   fVideo.seek(0);
    VideoReady(null);
              } else {
    trace(fVideo.state);
                   if (fVideo.state !=
    VideoState.DISCONNECTED) fVideo.stop();
    fVideo.close();                                
    fVideo.load(fVideoFolder + pUrl);
         } else {
    // error no url
    function VideoCreate():void
         trace("VideoCreate()");
         // remove old one
         if (getChildAt(0) == fVideo)
              removeChildAt(0);
         fVideo = new
    VideoPlayer(1024, 768);
         addChildAt(fVideo, 0);
         fVideo.autoRewind = false;
    fVideo.addEventListener(VideoEvent.COMPLETE, VideoDonePlaying);
    fVideo.addEventListener(VideoEvent.READY, VideoReady);

    Hmm. It's in connection with Dropbox. Så apparantly you can only use one of the two at the same time if you want the programs integrated in Finder.

  • Problems with Flash Video

    OK - I have had intermittent problems with Flash video, basically it gets choppy, usually after about 20 minutes - half an hour of watching - recently this problem has gotten worse - coinciding with a recent system update perhaps? - it's more or less anytime I stream something, and it happens on all browsers, even when the movie has clearly downloaded and is buffered way in advance of the playhead.
    On 2 occasions recently leaving the movie to play just to see what happens has led to a kernel panic.
    I've heard alot about Flash video generally being a resource hog and not playing ball sometimes - is there a way to solve this issue? Things I have tried - reset sound to 16 bit 44.1 khz in audio/midi manager; fixed permissions; run Tech Tool - everything seems to be fine hardware wise - I think there are some incompatible driver issues that are meesing up RAM usage but have no idea what or how to solve this... Any ideas anybody?
    Thanks.

    If, as you show, you are running 10.5.2, that is out of date. You need to install the 10.5.8 combo updater.
    It is also possible that your FlashPlayer is out of date.
    The latest version of Adobe FlashPlayer can be obtained from here:
    http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
    (You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

  • Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

    Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

    Hi,
    yes I have big problems as soon as I open the video app i get a total black screen, even the upper bar with the time disappears. I already tried to:
    1. closing the app and reopen it
    2. restart the iPad
    3. restore the iPad via iTunes
    4. Begging the app to work again.

  • Problem with Nokia Video Manager - No video, only ...

    Hi all,
    I have a problem with nokia video manager. I have been converting movies to mp4 and watching with my cell phone for a while now. But all the videos I have converted were less than 30 min. long.
    When I tried to watch a video longer than 36 minutes, the picture froze some time around 36th minute and only the sound continued to play. I have tried several other videos with similar lenghts and all seem to freeze at the same exact point. The player continues to play the sound after picture freezes.
    Could someone please help ???
    Regards
    /Cenk

    Hi davidf
    Thanks for the information,I must confess that I always use:
    http://www.slysoft.com/en/clonedvd-mobile.html
    when transferring movies to the N95, but that is just a personal choice!
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Having PROBLEM with playing videos on my 5800

    Hi all,
    I bought my nokia 5800 2 days ago, and i am havig a problem with my videos.
    When i try to play a video (MP4) SOMETIMES it plays it without a problem, but SOMETIMES it plays a black screen with sound. And the most strange thing is it can play a video and in few hours it will just play sound on the same video!!
    Please try to help..

    pavilion_alex wrote:
    phones like 5800 and other similar must be updated because a new update solves the existing problems on the device.
    download and install this http://www.nokia.co.uk/get-support-and-software/download-software/device-software-update/download and carefully read the instructions it gives you before the update.
     ...Or return the phone and replace it with something from another manufacturer that either A) works out of the box, or B) doesn't require such an awkward and painful update procedure. Nokia seem incapable of either.
    Message Edited by garnett on 26-Oct-2009 12:49 PM

  • I'm having problems with Flash Videos (Youtube and ESPN)

    I have been having this problem for the last couple of days now and it is really annoying. Whenever I watch a flash video like on youtube or espn my computer freezes up and the audio will make a loud buzzing sound. I have attached a video with the post so you can see what happens. I don't have problems with anything else except this. I also get this error no matter what browser I use. I have system restored my PC as far as I can go, and I've ran a ton of scans and driver update checks and nothing seems to work.

    merci a tous pour les nombreuses réponse. j'ai dû mal a les lire vue que je ne lit que le français. je vous remercié encore une fois amicalement. Blanchette 2.
    Date: Mon, 25 Jul 2011 19:50:19 -0600
    From: [email protected]
    To: [email protected]
    Subject: Re: I'm having problems with Flash Videos (Youtube and ESPN)
    What I meant is Hardware Acceleration off (disabled).
    >

  • Defect MacBook 2011. Problems with the video chip.

    I was faced with the legendary defect MacBook 2011. Problems with the video chip. Heard about what Apple makes replacement chips for free. My friend a year ago made the change in the service center. Is this true now?

    Since Apple says that some copy protected DVD's will not function with Disk Sharing, you may need to "clone" the DVD, using the MBP, to a flash drive, and use the flash drive to perform the installation of the software.
    Another alternative is to download and install the Trial version from the Microsoft Office For Mac website, and then use the activation code provided with the DVD to activate the full version install of the trial.

  • Problems with Flash video playback

    I'm having a problem with Flash video playback, hoping
    someone here can help.
    I have several movies which I have converted to .flv using
    the Flash authoring tool. I have then created an .swf for each
    movie, embedding the .flv along with the playback component,
    playback controls, etc.
    I can open these .swfs using Flash Player and everything
    displays and plays as expected. However, when I embed the .swf into
    a web page and open it using a browser, the playback controls don't
    show up, and the movie will only play if it has been encoded to
    autoplay. I am on an Intel Mac, using the latest Flash Player
    plug-in, and am having this problem in both Firefox 2.0.0.11 and in
    Safari 2.0.4.
    I'm guessing that the problem lies in how I have encoded the
    .swfs into the web page? Hoping someone has a solution, or at least
    a good suggestion!
    thanks,
    - sounddevisor

    Yes, that is exactly what I needed. Thanks!
    Just to clarify for anyone else who stumbles across this -
    the extra .swf files (which contain the skin for the player) need
    to be in the same directory as the .html doc which is displaying
    the video .swf. Hope that helps someone else!

Maybe you are looking for