Problems with mobile projects with apache flex 4.8 and an overlay of the latest air sdk

Using flash builder 4.7 beta, apache flex 4.8 and an overlay of the latest air sdk, i got resolution problems while testing the mobile app (windows version on windows 7) with the air (ipad)emulator. That means the emulator is much bigger than my screen (logicaly seen the resolution of my screen and also like this in earlier version), but the app is much smaller than the emulator. As I have no design view with apache flex 4.8, I don't know where to start searching. Can anyone give me some input?
Gert

Hi Crill,
I don't see any error on creating new projects and running the same.
Where did you get the installer from?
What is the framework linkage type? You can check this in project properties -> flex build path. It should be Merged into code for Apache SDK.
thanks,
Sudhir

Similar Messages

Desperately seeking help. mod_jk problem with Apache 2.0.49 and Tomcat 4.1.

Hi All,
I am setting up the connection between Tomcat 4.1 and Apache 2.0.49 since past 3 days without success.
I downloaded the
JK 1.2
JK 1.2 Binary Releases
mod_jk_1.2.5_2.0.47.dll from apache site.(renamed it to mod_jk.dll as instructed). Now the problem is that after making the other settings in server.xml, httpd.conf,workers.properties
My Tomcat does not show any error when i uncomment the following code
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
               port="8009" minProcessors="5" maxProcessors="75"
               enableLookups="true" redirectPort="8443"
               acceptCount="10" debug="0" connectionTimeout="20000"
               useURIValidationHack="false"
               protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
which is the code for mod_jk2. I don't understand this as I have download the file for JK1.2.
I am getting the mod_jk.conf file generated but it is generated with the following code.
<IfModule !mod_jk.c>
LoadModule jk_module C:/Program Files/Apache Group/Apache2/modules/mod_jk.dll
</IfModule>
JkWorkersFile "C:/Program Files/Apache Group/Tomcat 4.1/conf/jk/workers.properties"
JkLogFile "C:/Program Files/Apache Group/Tomcat 4.1/logs/mod_jk.log"
JkLogLevel info
<VirtualHost localhost>
    ServerName localhost
    JkMount /admin ajp13
    JkMount /admin/* ajp13
    JkMount /webdav ajp13
    JkMount /webdav/* ajp13
    JkMount /examples ajp13
    JkMount /examples/* ajp13
    JkMount /tomcat-docs ajp13
    JkMount /tomcat-docs/* ajp13
    JkMount /manager ajp13
    JkMount /manager/* ajp13
</VirtualHost>
AGAIN , here I fail to understand why it is generating the jk_module with forward slash.
(I HAVE GIVEN THE ps=/ property in worker.properties)
Once I add the path in quotes i.e.
LoadModule jk_module "C:/Program Files/Apache Group/Apache2/modules/mod_jk.dll"
I am able to start the apache server. but am failing in the connection test ie. not able to view the examples directory.
Plz. advise me , I am really going crazy over this stuff.
Thanks in advance,
Vishy.

I am confused, you need to pick modjk2 or modjk.
I would not use a precompiled modjk2.dll , I have and had security problems.
I would compile it from source. The instructions are in the source package.
If you use modjk, your on the right steps, modjk is more difficult to setup. than modjk2.
For modjk2 all you need is
LoadModule jk2_module C:/Program Files/Apache Group/Apache2/modules/mod_jk2.dll
and the workers2.properties in /conf directory, that's it.
Tomcat 4 and above come 'stock' with ajp workers turned on port 8009.
First make sure modjk is loaded in Apache.
Make sure all 30 lines of error page is uncommented on http.conf
You can do this by http://servername/SOMEbogusAddress
just go to apache page, then try and load a non-existing page
You should see at bottom of page:
Apache/2.0.49 (Unix) mod_jk2/2.0.4

Am having problems with my Zeppelin music player and iPod classic. The Zeppelin, bought Dec '12, and the iPod, bought same time, used to work fine but now when I attach iPod to Zeppelin I get a message that says the iPod doesn't support the accesory!

I bought a Zeppelin music player and iPod classic in December 2012, and all went well until I last synched the iPod with iTunes, and now I get a message saying that the iPod doesn't recognise the attached accessory when I try to connect it to the Zeppelin. I did recently update to the latest iTunes version-could this be the problem, and if so how do I cure it? All help appreciated.

It's still charging when you plug it in. That just means it won't play music out the speaker. If that's what you were looking to do, they have speakers for iPods.
-Molly

ARQ: Problem with Mitigation of a Risk and Request Rejection at the same time???

Hi All,
I have configured my workflow in such a way that, when a request reaches a certain approver (who is authorized to mitigate), he has following options available (we have configured this way):
1. Submit the Request: This will simply approve the request. But I would NOT want him to approve the request if it has violations. First he should mitigate the risks and then approve the request.
May I know how I can do it? Is this the correct process?
2. Reject the Request: If he is not ok, he can reject the request. I am ok with this and no action is required.
3. Forward the Request: If he needs any business clarifications, he can forward the request to the user's manager before mitigating and approving the request. This is also ok for me.
4. Mitigate the risk: If a request has risk violations, he can mitigate the risks by clicking on "Mitigate" button on "Risk Analysis" tab.
Here is the problem I see. The straight forward what he can do is, mitigate the risks and then approve the request (Submit). However, there is one more option with him and that is, he can mitigate the risks and then changes his mind to reject the request!
If he rejects the request (after mitigating the risks), the mitigation which was done before, is not "UNDONE". Meaning, that user is mitigated though the request is rejected!
This is very confusing and this way users are simply mitigated for no reason!
May I know below things:
1. What is the best way or practice to mitigate risks in a request?
2. How above explained problem (for point#4) can be addressed?
3. How I can stop approving a request if it has violations?
Please advise on this.
Regards,
Faisal

Hi Faisal,
I try to answer your question (as always ).
You can configure that at a specifc stage the approver cannot approve if there are risks. Therefore modify the task settings for all the stages and allow/disallow "approve despite risk". For all stages where approval can be given (like role owner stage) you can activate the button so that it is possible to approve even though risks are coming up.
To make this setting workable you have also to set parameter 1072 (Mitigation of critical risk required before approving the request) to YES.
Regarding the mitigation which was set but is obsolet after rejection. There is actually a simple way to remove invalid controls. Run the risk analysis and gather information for "Invalid Mitigating Controls".
In the result you have the option to change or delete the mitigation.
Does this answer the question(s)?
Regards,
Alessandro

How to setup Flex SDK with latest AIR SDK?

Now the latest AIRSDK web page has a small link at the bottom for Flex users and it states that Flex users should take the SDK version without the compiler. BUT....
the http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html page says to download the SDK from
http://labs.adobe.com/downloads/asc2.html
but this page now redirects to:
http://helpx.adobe.com/air/kb/archived-air-sdk-version.html
which contains a large list of archived SDK's. So that help page never really says which version of the SDK to use - with or without the compiler. But other forum posts have implied its suppose to be the one with the compiler.
Now since we're overlaying the ...plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK folder that would make sense.
But now there's a second overlay instructions page at:
http://helpx.adobe.com/x-productkb/multi/how-overlay-air-sdk-flex-sdk.html
with different instructions.
So my questions are:
   Which overlay instructions are we really suppose to use?
   Which version of the AIR SDK (with or with-out compiler) are we suppose to use?
   What does the Flex Library Project properties -> Flex Library Compiler -> 'Include Adobe AIR libraries' checkbox really do?
        If I've followed the (first) overlay instructions above, does this checkbox now mean I'm using the overlaid AIR SDK 3.6
        with the current Flex SDK I've chosen?
        What if I'm using the Apache Flex 4.9.1 SDK? Will the AIR SDK 3.6 overlay that?
            (Doesn't Apache Flex have AIR 3.4 embedded - will this confuse Flash Builder 4.7 ?)
Is it just me, or is this just getting more and more confusing? Can we perhaps get a AIR SDK combo box to go beside the Flex combo box and when we check the 'Include Adobe AIR libraries' then we can select the AIR SDK we want? And get a 'configure AIR SDKs...' link too? Then perhaps we can get completely away from overlays and all this merged SDK nonsense. I've had nothing but problems with it.
The real reason I need all this info is because I'm trying to use Flash Builder 4.7 to build an Android ANE and I'm having a devil of a time just trying to find my resources. When I use context.getResourceID() I'm not getting the correct resources - and after reviewing other posts here I came to the conclusion that it might be due to bugs in older AIR SDK's. So really, at the moment I could care less about the latest Flex SDK, I just need to know I'm working from the latest AIR SDK.
Thanks in advance.

If you are not using Flash Builder go here: http://www.adobe.com/devnet/air/air-sdk-download.html
At the bottom it says:
Note : Flex users will need to download the original AIR SDK without the new compiler. Mac Windows.
Download the proper one for your OS and then extract it over your existing Flex SDK directory.
EDIT: Just read your post again and noticed you mentioned Flash Builder. In that case you want to follow these directions: http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html and grab the version with the compiler at http://www.adobe.com/devnet/air/air-sdk-download.html

Compiling Errors with latest air sdk

Not sure if any is having similar issues but here it is:
Using latest Apache Flex SDK (4.9.1) -- used the installer.
After that I overlayed the latest AIR SDK (did this three times to make sure I did right -- have done multiple times before)
Updated the application descriptor (with 3.7) and -swf-version=20 in compiler settings.
Now I am getting these errors when compiling (compiling completed 100% successfully before the upgrade).
Any suggestions or solutions would be greatly appreciated (note that I require the mx.controls.HTML class as well as the mx List and mx Canvas classes for very good reason).

Hi,
This article starts with how to overlay AIR SDK's over Flex. http://www.adobe.com/devnet/air/articles/ane-android-devices.html
Please try and update if this will work for you.
Regards,
Nimit

Right problem with apache and tomcat

Bonjour;
I use a user login "apache" to stop/start Apache and tomcat. Because never launching apache et tomcat as root.
But I have the following problem with apache (file error.log) :
[Tue May 6 17:26:22 2003] [error] Connection "warpConnection" cannot connect
[Tue May 6 17:26:22 2003] [error] Cannot open connection "warpConnection"
[Tue May 6 17:27:01 2003] [error] Re-Trying to deploy connections
As root the error msg does'nt exists (lost)
Best regards;
A+;

Run it from the shell to see whats wrong:
# httpd

Is anyone else having problems with syncing photos on ipad - seems to be fragmenting the events

Is anyone else having problems with syncing photos on ipad - seems to be fragmenting the events

Here's the problems I'm having with iPad 2 and iOS 5.1:
Okay ... so, because I had less than a 1 Gig left (as reported by iTunes) on my 64Gig iPad, and the majority of the space was being used by "Photos" ... I decided to not keep my PC photos directory in sync with my iPad (Windows 7). So, in iTunes, I unchecked the option to sync computer photos to the iPad. I got the standard popup warning message that my iPad would not contain those albums after the next sync. I clicked OK and proceeded to sync expecting to have lots of space freed up.
But weird things happened after syncing.
(1) I still have all my photos on my iPad .... nothing disappeared at all. (And performed multiple syncs to try to force the change ... still nothing has been removed from my iPad.)
(2) Somehow, I gained 20 Gigs of free space, as reported by both iTunes and my iPad as well.
Anyone know what's going on here?
I do have iMovie and another movie making app, Avid. Both of these contain projects that refer to photos in albums that were supposed to be removed after the sync ... but I can't imagine that would keep them there. Anyone have any ideas?
I also installed the iPad app, iPhoto. I noticed that it build a directory listing and continuously want to update that listing from time to time.
Would any of these things cause the iTunes photo sync changes to be ignored? And, how did I get free space to report back with an additional 19Gig or so, when there's no change at all.
Unsure what's going on ...

Problems with creation of catalogue XPGrpwise and temporary

Problems with creation of catalogue XPGrpwise and temporary files.
I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

Cvetaev,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
Marcelo

If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac

Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

HT4009 Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I wan

Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?

Contact iTunes Store Support.

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

Performance Problems with MS IE 6.0 and EP 7.0 (2004s)

Hello,
we have a problem with ie 6.0 webbrowser and EP 7.0 (2004s). When we open for example the theme editor in the ep-system-administration site we must wait with MS ie 6.0 webbrowser ~ 18s for the site opening. With firefox 2.0 we can open the theme editor with ~ 1s.
Have/Had anybody the same problem? - Or is this a knowing problem with ie 6.0.
We used for the network analyse the tool: httpwatch 3.2. We can see, that the ie 6.0 must wait into the all-time of 18sec. 13sec for opening the site: emptyhover.html.
- Thanks in advance for a tip !
Best Regards,
Ralf

Hello Ameya and hello Shao,
we use the version SP12 NW 2004s. We have the this problems with a base application of portal: theme editor.
We can see in the httpWatch 3.2 analysis tool, that the ie 6.0 load a much of cache files from the client webbrowser. Could it be this problem? - I red in this forum problems with the webbrowser-parameter: "Empty Temporary Internet Files folder when browser is closed"
Thank you for your helping.
Best Regards,
Ralf

I have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

Will u help me or not?

Problems with mobile projects with apache flex 4.8 and an overlay of the latest air sdk

Similar Messages

Maybe you are looking for