Problems with phoneline round 2
Its one thing after another with BT I was informed of some changes which would be a major dissadvantage to me on the new calling plan I subscribed to. So because of this I try to alter the plan. Needless to say I would not have changed my plan in the first place if I was aware of the 7-7 change. I phone up was offered anytime plan with 3 months free. So I took the offer.
But as before the order kept failing.
And to top it all I now cant see my plan online and am told some assets have been removed from my account and they carnt see a phoneline active. (even though my phone still works)
I do not want my phone to go off as it is a very importent service to me. My son lives down the road from me and has health issues this service is a lifeline in case he goes to hospital or if I need to be informed of anything.
Well it looks sorted. Just looked up online and everything is as it should be thankfully.
Similar Messages
-
Problem with the round function using Date
Hi,
I have a problem with round function for Date. The input is the four digit year which was picked out from say SYSDATE.
In these scenarios the original value should be rounded up and should get the output as shown under rounded column.
Scenario1
Original Rounded
2020 ---> 2020
2021 ---> 2020
2022 ---> 2020
2023 ---> 2020
2024 ---> 2020
2025 ---> 2025
2026 ---> 2025
Scenario2
Original Rounded
2020 ---> 2020
2021 ---> 2025
2022 ---> 2025
2023 ---> 2025
2024 ---> 2025
2025 ---> 2030
2026 ---> 2030
Scenario3
Original Rounded
2020 ---> 2020
2021 ---> 2020
2022 ---> 2020
2023 ---> 2025
2024 ---> 2025
2025 ---> 2025
2026 ---> 2025
Can anyone help with this....Urgent Please
Thanx for your time1.
SQL> select n,n-mod(n,5) rnd from test;
N RND
2020 2020
2021 2020
2022 2020
2023 2020
2024 2020
2025 2025
2026 2025
2.
SQL> select n,n+(case when mod(n,10) = 0 then 0
2 when mod(n,10) < 5 then 5-mod(n,5)
3 else 10-mod(n,10)
4 end) rnd
5 from test;
N RND
2020 2020
2021 2025
2022 2025
2023 2025
2024 2025
2025 2030
2026 2030
7 rows selected.
3.
SQL> select n,n+(case when mod(n,10) < 3 then mod(n,10)*-1
2 when mod(n,10) < 8 then 5-mod(n,10)
3 else 10-mod(n,10)
4 end) rnd
5 from test;
N RND
2020 2020
2021 2020
2022 2020
2023 2025
2024 2025
2025 2025
2026 2025
2027 2025
2028 2030
2029 2030
2030 2030
11 rows selected. -
Problem with undesired rounding of entity attributes of type Number
Hello,
We have an entity object based on an oracle database table. Some of the columns of the table are of type NUMBER ( without specified precision and scale) and are mapped to attributes of type oracle.jbo.domain.Number as is the oracle recommendation and default behaviour. We have a view object based on this entity. We are using JSF <af:table> component to show and edit the contents of the view object.
In the database table we have values in the NUMBER columns like:
-.0000000000000696421833421346
8029.19708029197
-364.9641231232332
The problems is that these values get rounded to the 3th digit after the decimal point, without to have specified any formatting. The numbers shown in the <af:table> look like:
-0
8029.197
-364.964
We tested the ViewObject with the Business Component Browsers and there the values looked fine. In the JSF page we tried to comment out the <af:converter> but the result is the same.
The problem is where these values are rounded to the 3th digit after the decimal point. Is that an ADF configuration?
Please reply ASAP, the case is urgent, we are waiting on that to move our system to production.Hi
I have a similar problem.
I want to load xml data into a table using the OracleXmlSave class.
There are long numbers to import (7638286488771946140)
When the destination field is of type NUMBER(38), everything is alright. But when there is no precision specified (just NUMBER) the numbers are rounded to 14 digits
7638286488771946140 -> 7638286488771950000
When i insert numbers with TOAD, everything's alright, even with "just-NUMBERs".
Any ideas?
Daniel
Message was edited by:
user548995
Message was edited by:
user548995 -
Problem with demo : Round-Tripping XML with Oracle9i
Hi,
We have recently installed a 9.2.0.1.0 database with the intention of trying some of the new XMLTYPE samples.
I downloaded the demo : Round-Tripping XML with Oracle9i.
The first part, Mapping XML into Oracle9i, worked fine.
The second part, Re-composing XML from Oracle9i, doesn't seem to run.
Here is what I get i SQLPLUS :
(Step 1 to 15 is OK)
SQL> create or replace type PURCHASEORDER_TYPE as object
2 (
3 "Reference" VARCHAR2(64),
4 "Actions" SYS.XMLTYPE,
5 "Requester" VARCHAR2(48),
6 "User" VARCHAR2(32),
7 "Reject" PURCHASEORDERREJECTION_TYPE,
8 "CostCenter" VARCHAR2(3),
9 "Vendor" VARCHAR2(32),
10 "PONumber" NUMBER(10),
11 "ShippingInstructions" PURCHASEORDERSHIPINST_TYPE,
12 "SpecialInstructions" VARCHAR2(2048),
13 "LineItems" SYS.XMLTYPE
14 );
15 /
Type created.
SQL> --script 16
SQL> create or replace view PURCHASEORDERDOCUMENTS as
2 select P.REFERENCE,
3 sys_xmlgen(
4 PURCHASEORDER_TYPE(
5 P.REFERENCE,
6 (
7 select
8 sys_xmlagg(
9 sys_xmlgen(
10 PURCHASEORDERACTION_TYPE(
11 A.ACTIONEDBY,
12 A.DATEACTIONED
13 ),
14 sys.xmlgenformattype.createFormat('Action')
15 )
16 ).extract('//Action')
17 from PURCHASEORDERACTIONS A
18 where A.REFERENCE = P.REFERENCE
19 ),
20 P.REQUESTER,
21 P.USERID,
22 PURCHASEORDERREJECTION_TYPE(
23 R.REJECTEDBY,
24 R.DATEREJECTED,
25 R.COMMENTS
26 ),
27 P.COSTCENTER,
28 P.VENDOR,
29 P.PONUMBER,
30 PURCHASEORDERSHIPINST_TYPE(
31 S.SHIPTONAME,
32 S.ADDRESS,
33 S.PHONE
34 ),
35 P.SPECIALINSTRUCTIONS,
36 (
37 select
38 sys_xmlagg(
39 sys_xmlgen(
40 PURCHASEORDERLINEITEM_TYPE(
41 L.LINENO,
42 L.DESCRIPTION,
43 PURCHASEORDERPART_TYPE(
44 L.PARTNO,
45 L.QUANTITY,
46 L.UNITPRICE
47 )
48 ),
49 sys.xmlgenformattype.createFormat('LineItem')
50 ),
51 sys.xmlgenformattype.createFormat('LineItems')
52 )
53 from PURCHASEORDERLINEITEMS L
54 where P.REFERENCE = L.REFERENCE
55 )
56 ),
57 sys.xmlgenformattype.createFormat('PurchaseOrder')
58 ) "PODOCUMENT"
59 from PURCHASEORDERSTORE P,
60 PURCHASEORDERREJECTION R,
61 PURCHASEORDERSHIPINSTRUCTIONS S
62 where R.REFERENCE = P.REFERENCE
63 and S.REFERENCE = P.REFERENCE;
View created.
SQL> --script 17
SQL> set heading off;
SQL> set wrap on
SQL> set pagesize 10000;
SQL> set long 10000;
SQL> select P.PODOCUMENT.getClobVal() from PURCHASEORDERDOCUMENTS P;
select P.PODOCUMENT.getClobVal() from PURCHASEORDERDOCUMENTS P
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at line 1
Has anyone had the same problem ?? I would appreciate any suggestions.
Thanks,
FrankI found the solution :
The database was running with a multibyte characterset (UTF8).
After changing that to WE8ISO8859P1 everything worked fine.
It is strange that Oracle suggest to use UTF8 when installing the new database (9i)
and on the other hand doesn't support multibyte charactersets for several of the XML-products.
Cheers,
Frank -
I have a pb of round when I sum 2 doubles ,how can I correct that?
for example in my program :
6.1+3.2=9.3000000001
thanksTwo routes:
1. Use java.math.BigDecimal instead.
2. Display your number using DecimalFormat. -
Problem with Float - round down error
I have to save in database (MySql) amount which is passed by user. For instance user writes 99999999999. But Float.parseFloat(request.getParameter("amoUnit")) returns value 9.9999998E10 . When I save this value in database I receive 99999998000.00. I want to have in database exactly what the user has written. Should I use differen data type? Thanks in advance.
leonkaP wrote:
... I want to have in database exactly what the user has written. Should I use differen data type? Yes.
If you want more precision than float, use double.
If you want exact precision, use BigDecimal. -
Q: Problem related to Rounding of quota
Hi Experts,
My rounding requirement is if Quota less than 0.4999 day is disregarded, 0.4999 and above shall be rounded up to 1 day.
I have a problem with following Rounding rule which is configured by me.
26 001 000000 0.49998 x 000000 x
26 002 0.49999 x 1.00000 1.00000 x
When I am inserting the above rounding rule (26) to selection rule- The quotas are not at all getting not generated.
With out this assignment the quotas are getting generated.
Do I need to configure anything else to get the desired output or is there anything wrong in my rules?
Thx
ThomasWilfred Krens,
Thanks for your time.
Quotas were not getting generated bcos I had given the rounding rule > SELECTION rules>tab accrual entitlement.
Bcos of that, the quota was getting rounded on daily basis and finially output was zero.
*Now I have solved issue.*
By giving the rounding in-> SELECTION rules> Total entitlement tab
Now I changed the rule as
26 001 0.49998 1.49999 x 1.0000 x.
My understanding is as follows -
The decimal part of the lower limit and upper limit should be same .
Regards
Thomas
Edited by: Thomas Padiyara on Nov 19, 2008 8:19 AM -
Problem with rounding in standard cost estimate.
Hi All,
Happy 4th of July!
I have a problem with the standard cost estimate where the system try to calculate overhead costs (from costing sheet) with a fix percentage (9.7%) to the value coming from material consumption costs element.
Let say I have $1.71 material consumption and the overhead rate of 9.7%
The real calculation should be (1.71*0.097) = $0.16587
But at CK11N screen, it shows only $0.16 (two decimal rounding)
Is there a way that I can bump the rounding to at least 3 decimal point to make it more accurate?
Very appreciate any input you guys can share. Thank you.
CharithaHi Chari ,
My experience says that you can use only 2 decimals ..
Moreover , please have a look into SAP Note : 639410 - CK11N, CK13N: Message CK869 due to rounding
differences.
There a some source code corrections also on rounding differences- check if it helps you also...
Regards
Sarada -
Hi!!!
I have a dude. When I use select round((9013.99/12)*6,2) from dual; the result is 4506.99. Why?? I think it should be 4507. Is it a problem with sqlplus? or I should set a parameter?
Regards.Just assuming, these might be the reasons for differing in results. Not sure, what oracle is doing inside! Check below scenarios.
-- Check 1(Pass computation value then change it to NUMBER for assuring ROUND() of understanding to treat the exact display value!)
select val, round(to_number(val), 2) res
from
(select (9013.99/12)*6 val from dual)
VAL RES
4506.995 4507
-- Check 2 ( Pass a static number)
select val, round(val, 2) res
from
(select 4506.995 val from dual)
VAL RES
4506.995 4507
-- Check 3 ( Initial oracle computation might not be the exact number value which round is getting here as parameter!)
select val, round(val, 2) res
from
(select (9013.99/12)*6 val from dual)
VAL RES
4506.995 4506.99 -
Round Trip problems with FCP, Motion and 16:9
Hello all-
I've been having some problems with FCP5 and Motion 2. I am working with anamorphic footage (mini dv), and my problem lies in trying to use the "send to" feature in FCP to Motion 2. If I send some footage to Motion 2, edit it, and then go back to FCP to look at my edit, the anamorphic flag has been removed... the video is squished and there are black bars on the right and left sides of the film. I can easily fix this if I find the clip in the FCP browser and check the anamorphic flag, then drag and drop that clip over the original in the sequence, but I was wondering if there was an easier way. Is there a way to make it be anamorphic when it comes back into FCP from Motion 2?
Thanks!
Dual 1.8 G5/2GB & 12 PB G4/1.25GB Mac OS X (10.4.4)Yes, it loses the anamorphic flag on round trip. Just
ctrl/right-click on the Motion project in your
timeline, select Properties/Format and click on the
anamorphic setting column.
Patrick
Patrick-
Thanks for the reply. That's exactly what I've been doing, but I was just wondering if this was an actual bug or not. I guess we will have to wait for Apple to fix it...
BTW- Whenever I check the anamorphic culumn, I always have to re-drag and drop the clip in the timeline again. Is this right? Or should it go ahead and change it in the timeline automatically?
Thanks again!
Dual 1.8 G5/2GB & 12 PB G4/1.25GB Mac OS X (10.4.4) -
Hi everbody,
First of all, sorry for my bad englisch. I'm German
Here's my problem: step 1: i'm writing a word and then i'm using the effect ‘create outlines‘ in the type menu.
step 2: after that i'm using the filter ‘round corners‘
But not all corners are round after that. I've problems with the letter ‘S‘. Just 2 corners are round and the ohter two are unchanged.
Does anyone know what the problem could be?
Thank you very much!
SimonSimon,
I see what you see.
Unless you have CS6, you should be able to use the free Round Any Corner script on the relevant Anchor Points, available here:
http://park12.wakwak.com/~shp/lc/et/en_aics_script.html -
HT4111 Logitech K810 UK layout problem with @ and " being the wrong way round.
I have tried this keyboard on Windows 7 devices and they work just fine, but on IOS7, either the first version or the version released today, it remains the wrong way around - i.e. US spec.
Hi,
I have a problem with the same keyboard when I start up and hold the ALT key you can select a startup disk this is not working by my keyboard when I use a old keyboard I'ts working again do you have that problem also.
Best regards Garry -
IDES installation problem with DDIC password
Hello everybody,
After hours of searching and trying..
I have here a problem during a local installation of IDES ECC 6.0 on Windows Server 2008 with MAXDB. The installation stops in phase 27 of 29 u201Ccheck DDIC passwordu201D - test logon to SAP system failed, with the error message FRF-00007 "Unable to open RFC connection" in sapinst.
The MMC shows in the process list that the following processes stands oon "green": igswd, mag_Server and disp+work are running. The message of servers connection is OK, acts dialogue queue time is 0.00 sec.
I have already searched the forum, but I am not able to logon as user SAP* with u201C060. u2026u201D or as user DDIC with the password u201C199. u2026u201D to change the DDIC password to my password set during the installation (transaction -S000 / SU01). The login fails over the MMC as well as over the SAP GUI 7.10. I have tried this on the client 000, 001 and 800. The error message is u201CSAP Logon Failed - connection closed without message (CM_NO_DATA_RECEIVEDu201D). The SAP GUI gets down with "Work process restartet, session terminated".
What can help to solve the problem? Can it be a problem with the ms loop adaptor? Which static address IP must assign to the loop adaptor? Did i have to update the kernel of the data bank or is this not necessary? Can the information from dev_w help?
Can this link help me: BI 7.0 Installed but errored out during DDIC password check !!!!!!!
Thanks in advance
Lenvy
Edited by: Lenvy Gee on Sep 6, 2009 2:30 AM
Edited by: Lenvy Gee on Sep 6, 2009 2:34 AMGood Morning everybody,
I started a next try, the mmc is running on green, the login starts up and......failed.
So the network setting seems to be correct.
The log files included following:
..........................................(just the last lines).............................
M
M *****************************************************************************
M *
M * LOCATION SAP-Server BASIS_A23_00 on host BASED (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Mon Nov 26 08:06:26 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 10688
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M Entering ThSetStatError
M ThIErrHandle: incomplete previous roll out, do a full roll out
M ThRollOut: roll out T17/U25/M0/I0 (level=7, short_roll_out=0)
M ThRollOut: call rrol_out (1)
M ThRollOut: act roll state = DP_ROLLED_OUT
M ThRollOut: roll level <> 0, don't call ab_rollout
M ThRollOut: full roll out of U25 M0 I0 (Level 7) ok
M ThIErrHandle: prv_action of W0: 0x8
M ThCallDbBreak: use db_sqlbreak
C CANCEL rejected, because there is no SQL statement active
M ThIErrHandle: don't try rollback again
M ThIErrHandle: call ThrCoreInfo
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
M ThContextId: context_id = >0001700020019C010D31F2D5BD12D1714B103838<
M ThContextId: context_id_uuid = {29019C01-7F24-F235-BD12-D1714B103838}
M ThGetTransId2: got trans id (spa) >29019C017F24F239BD12D1714B103838< (32)
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
M RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 000000000F67D3C8/0000000000000000/0/0/1
M RmCleanUpResources3: no resources registered
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_RETURN
M ThIErrHandle: ThrCoreInfo o.k.
M ThIErrHandle: Entering ThReplyToMsg
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (11)
M ThErrHdlUser: save context
M ThEmContextDetach2: detach T17/M0 from em memory (em_hdl=0, force=0)
M ThEmContextDetach2: reset local em info
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE YES YES NO 000 255 255 20401126 080533 BASIS
C Disconnecting from connection 0 ...
C Now I'm disconnected from SAP DB
B Disconnected from connection 0
B statistics db_con_commit (com_total=4, com_tx=0)
B statistics db_con_rollback (roll_total=1, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 816) [dpnttool.c 327]
M return from clean-up function ...
and:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid A23
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2928
Mon Nov 26 08:03:01 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2928) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Nov 26 08:03:10 2040
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 9 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >BASIS_I23_00 <
DpShMCreate: sizeof(wp_adm) 25168 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000D800050, size: 6348592)
DpShMCreate: allocated sys_adm at 000000000D800050
DpShMCreate: allocated wp_adm at 000000000D802150
DpShMCreate: allocated tm_adm_list at 000000000D8083A0
DpShMCreate: allocated tm_adm at 000000000D808400
DpShMCreate: allocated wp_ca_adm at 000000000DD6C2A0
DpShMCreate: allocated appc_ca_adm at 000000000DD72060
DpShMCreate: allocated comm_adm at 000000000DD73FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000DDFAC30
DpShMCreate: allocated gw_adm at 000000000DDFACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000DDFACE0
DpShMCreate: allocated wall_adm at 000000000DDFACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 4093MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 4096MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( BASIS) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >BASIS_I23_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Nov 26 08:03:11 2040
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 144
Release check o.K.
Mon Nov 26 08:03:17 2040
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Mon Nov 26 08:04:26 2040
SoftCancel request for T17 U18 M0 received from IC_MAN
SoftCancel request for T19 U20 M0 received from IC_MAN
ERROR => DpWpKill(3092, SIGUSR2) failed [dpxxtool.c 2496]
Mon Nov 26 08:04:30 2040
ERROR => DpHdlDeadWp: W0 (pid 3200) died [dpxxdisp.c 14532]
Mon Nov 26 08:04:31 2040
ERROR => DpHdlDeadWp: W1 (pid 3220) died [dpxxdisp.c 14532]
DpHdlDeadWp: restart wp (pid=3092) automatically
ERROR => DpHdlDeadWp: W3 (pid 3296) died [dpxxdisp.c 14532]
DpHdlDeadWp: restart wp (pid=3268) automatically
ERROR => DpHdlDeadWp: W10 (pid 2032) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W15 (pid 3312) died [dpxxdisp.c 14532]
Mon Nov 26 08:04:45 2040
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c 6971]
Mon Nov 26 08:05:10 2040
ERROR => DpHdlDeadWp: W4 (pid 3260) died [dpxxdisp.c 14532]
Mon Nov 26 08:05:30 2040
ERROR => DpHdlDeadWp: W0 (pid 3788) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 2108) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W6 (pid 3108) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W15 (pid 464) died [dpxxdisp.c 14532]
Mon Nov 26 08:05:33 2040
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c 6971]
The kernel is not patched. I just (try) to install the kernel files from the sap market place
IDES download destination. The install kernel file was: 51033508_7 - NW7 SR3 Kernel 7.00 for Windows / LNX X86_X64. I got an update / upgrade file, which is called: 51033508_8 - NW7 SR3 Kernel .... Upg ABAP.
Can anybody give me an adwise by reading those logfiles? Is the file ok for updating the kernel?
How do I upgrade the kernel by having no .exe - file? May the installation go on after patching the kernel?
Thanks you really much
Lenvy -
Problems with dating downloaded images using Image Browser
When I download a day's pictures with Image Browser to my Mac, and some images were taken before 5 p.m. and some after 5 p.m., any of them taken after 5 p.m. are kicked into the next day's folder on my computer.
My camera and computer dates are correct. Time zone (Pacific) is correct. Even my tech savvy son can't figure this one out. Can anyone help me? Thanks!Hey RJ, I was able to create it no problem using either Rectangle Tool with 10px roundness (left), or the the Rounded Rectangle Tool (right).
See live example here with drop shadow.
Download original sample file here.
Couple of tips to remember.
- Use .jpg (100 quality) or png for each of the slices for them to show 'smoothly'. (I notice your screen example uses .gif, and it's not recommended when drop shadows are used)
- For the top/bottom make sure the slice extends just a tab bit beyond where the 'corner' on the shape occurs. Thats why your seeing a little 'extra' graphic on your edges.
hope this helps
h -
Spry menu problems with Internet explorer
Hi everyone
I'm having ongoing problems with my horizontal menus and
internet explorer. They work fine in other browsers and with the
generous help of others at these forums I've managed to sort out
most of the problems. But I've hit a real wall with this one. The
menus drop down showing the links OK but you cannot highlight or
click on the options that drop down, they just appear as text. Any
help would be appretiated. My appologies for posting in other
threads also but just hoping for a response.
I am very new to this side of design so simple answers would
be very helpful. Thanks
BobI have 2 similar problems to the prior posts:
1) I run IE7 and FF and the positioning of my submenus are
skewed in IE only.
2) I am not sure, but I believe I have a problem with my
iframe appearing in my IE7 browser behind all of my submenus. Well,
I know I have a problem with something, but whether or not it's the
iframe I don't know. What I do know is that the box shows up like a
border around my submenus and I can't get rid of it. I suspect that
it may be caused by the fact that my menu buttons are imported
gif's in the shape of rounded rectangles which allows for the
corners to be visible. I actually just thought about it and my
gif's are set to have a white index transparency, but maybe If I
export the gifs without transparency, then that issue will be
resolved. Well I will try that part and see, but any and all
suggestions are welcome. Oh and I just remembered, that problem
with the border around my submenus also has another problem with
the word "false" inside of that border behind my submenus. This
problem again is only in my IE browser, and it is hard to see it,
but I have no idea why that is there or what it's from. I ran a
search in my SpryMenuHorizontal.css page and in my html page for
the word 'false' but nothing turned up. The only document related
to this issue that contains the word 'false' is the
'SpryMenuBar.js' document.
CSS
Layout file
HTML Demo
link
Thank you,
Danny
Maybe you are looking for
-
okay so a few days ago i received and email for one of my colleagues to do some final editing to a music video. the folder contained 2 videos a rough chops and the main which was about 2-3GB which i dragged on to my external hard drive . and at the t
-
PUMP process is Running. Not generating message in report.No replication
Hi, I am using GoldenGate 11g with Oracle database 11g on IBM AIX server at source and Linux at destination. I have created the extract process and the pump process but the pump process is not responding. The report of my PUMP process is as below. I
-
Itunes sync music to ipod but music not visible in ipod once disconnected
Hi, my ipod nano refuses to show any songs I've synchronized. it all started last week, I connected the nano to charge the battery and change my music selection. Itunes (v 8.1 (50)) told me something like it had to erase the ipod for some reasons. I
-
When downloading to my nook, only get first 10 pages.
When transferring a book to my nook, I only get the first 10 pages. The entire book is in my digital editions. Any suggestions?
-
[JS] Updating a dropdownlist
In ScriptUI, let's say I have a window that's current;y displayed with a dropdownlist in it. is there anyway to add items to the menu while the window is open? I've been able to use removeAll() to remove the items from the menu, but I want to add thi