Problems with saving and inserting pages

I am using Adobe Acrobat X Standard. After I write a report and PDF it, I always have to insert other information in the report. This additional information is also been PDF. Why is it that sometimes it will not let me save the file after I have inserted new pages? It says the file is “read-only” but I saved the file a few minutes before. I have to save my changes to a new file name.
Other times, I am replacing pages, and it will not let me. I might be able to insert the new page but it will not let me delete the old page. It says the file is open by someone else. I am on a single laptop that is not on a LAN. When this happens I must save what I have and close the file. When I reopen the file I can delete the old page.
Is there something that should be checked or unchecked?

What is the JSP scriptlet code at line 6 ?
By looking at the code we can identify if there are any syntax errors, otherwise we can't really guess what might be the problem.

Similar Messages

Problem with overwrite and insert keyboard commands

I'm a new user, switching from FCP. I edited one project successfully with no trouble a couple of weeks ago. Now I'm in a second project and having a weird difficulty. Using a pretty new Mac 8 core tower.
The insert and overlay keyboard commands (comma and period keys) don't work. They still work in the old project but not this one. If I start a new sequence and copy my timeline to it, the commands will work for awhile but ONLY with video, not with the audio tracks. Drag and drop works fine but that really slows me down.
The clips I'm using are all the same format (H.264 from Canon 5DII and some still photos) as the first project. Only difference in this project is lots of chroma keying and some resizing of background still photos. Nothing unrendered.
I started a new project just now and imported the problem project into it, started a new sequence, copied old sequence, and I get the same problem. I can drop in video with a keyboard command but not audio. Earlier it was not even doing video. Yesterday when I'd start a new sequence and do the same thing, it would give me video on the keyboard command but then eventually that would stop and it would do nothing. At one point the cursor would move over the width of the clip, as if it had been dropped into the timeline, but then that stopped as well.
I've trashed preferences and that didn't work. I did that according to a procedure I found online. It said open up PP while holding down the Shift and Option keys. I did that twice. Nothing.
To summarize: Keyboard commands for overwrite and insert edit do not work in this project but do in an older project.
Any ideas?
Thanks.
Bill Pryor
[email protected]

Well, thanks to an email from another person who was having the same problem, it's all solved not.
Operator error. Dang. Who knew--in FCP you select a track by clicking on the V or A buttons to the far left. In Premiere Pro you have to make sure BOTH the far left button and the one to the right that says Video 1, Audio 1, etc. are also clicked. They BOTH have to be light gray. In my first project, everything was properly activated but in the next project apparently they were not and that carried over to succeeding projects (even though I didn't change anything...at least consciously).
So all as well now. No glitch, no bug. Just good ol' fashioned operator error. I will wear the dunce hat today.

Problems with saving and versions

i know you're all preparing popcorn for the iPhone release, but maybe one or two have got a minute to read this and help me
i'm using lion for a while, and ever since i'm losing files.
my problem is not the system, maybe i just didn't get how to use it, but i'm blaming having lost my files. :/
so, there's versions, and autosave. but simetimes i dran 'n drop a file i'm working on trom my taskbar (the little icon next to the filename) to my desktop. sometimes, but not always, it's corrupted. i don't always notice right away, so when i close the document (without saving of course) it's just a file icon, but there is no possible way to open it without getting a message.
i don't know if i'm not using it right, but "they" say you don't have to save your files, they say your files are saving versions, but so many times i can't go back to a version.
also i'm using a lot of photoshop, and just now something happened, and not for the first time:
i opened up a .psd that i was working on yesterday. when i wanted to save it (with crtl-S), it said "Could not save *documentname*.psd because the file is already in use or was left open."
of course the file is in use and open. how does the mufassa expect me to save a file without opening it up? and why would i save a file without using it before? this is not the first time, and i always have to save it using a different name, and then delete the old file...
i might have a thinking problem, but maybe you can still help me out?
can someone update me on how to optimize my workflow, so i can spend more time working, and less time looking for files or restarting documents?
thx and peace,
Marc

Hi there
I'm a bit perplexed and more than a bit concerned with something you said:
mheilZP wrote:
The other person I worked with had no problems accessing and saving new versions of the file, but for some reason it fouled up on me. I've never had this happen before and was wondering why it happened and what I should do to avoid it happening again.
This seems to infer that you are sharing the same project with another person? If I'm correct in my understanding, there are two major things wrong here.
1. You cannot share a project in a fashion where two or more users make edits to it at the same time. Doing so is an open invitation to disaster.
2. In order for two or more users to have access to the same Captivate project, it would have to exist on a network drive. Editing projects while they are stored on a network resource is another open invitation to disaster.
The bottom line here is that Captivate files must be edited from the local C drive by a single author. You may copy them to a network location for the purposes of backing them up, but that's it.
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Problems with facebook and loading page in Safari

When I am chatting on facebook and try to click around on the page, most specifically when I have other tabs running on Safari, facebook will not completely load and i will get the spinning cursor on the facebook tab that will not go away. It continually tries to load with no success. I have to close the window and open a new one for it to go away. It only seems to happen when I am chatting with people on facebook chat...any suggestions?

Ok...
Time to get out your install disc, run the Disk Utility app and check the startup disk for errors.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
(In Mac OS X 10.4 or later, you must select your language first from the installer menu)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your startup disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 15% free space.*

Problems with filters and jsp pages.

I have the following simple filter that checks if there is user information in the session object and redirects accordingly:
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class LoginFilter implements Filter
     public void init(FilterConfig filterConfig) {}
     public void destroy() {}
     public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain)
     throws IOException, ServletException
          System.out.println("filter");
          HttpSession session = ((HttpServletRequest)request).getSession();
          String action = request.getParameter("action");
          if(action != null && !action.equals("login") && !action.equals("wronglogin"))
               if(session.getAttribute("username") == null)
                    ((HttpServletResponse)response).sendRedirect("index.jsp?action=wronglogin");
                    System.out.println("User not OK, kicking out...");
               else
                    chain.doFilter(request, response);
                    System.out.println("User OK, letting in...");
          else
               chain.doFilter(request, response);
}The filter is mapped to an admin page with the name index.jsp. However, I get an error for every <% and %> tag in the file (there are quite a few) when I use the filter with the page. The page works fine without the filter, and the filter seems to work with pages without scriptlets (without the <% and %> tags). Here is the beginning of the error report:
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 6 in the jsp file: /admin/index.jsp
Generated servlet error:
Syntax error on tokens, AnnotationName expected instead
An error occurred at line: 6 in the jsp file: /admin/index.jsp
Generated servlet error:
Syntax error on tokens, delete these tokens
An error occurred at line: 6 in the jsp file: /admin/index.jsp
Generated servlet error:
Syntax error on token ";", [ expected
An error occurred at line: 6 in the jsp file: /admin/index.jsp
Generated servlet error:
Syntax error on token ";", [ expected
An error occurred at line: 6 in the jsp file: /admin/index.jsp
Generated servlet error:
Syntax error on token ";", [ expected
Jasper gives me many errors per <% and %> tag. As you can see there is a <% tag on line 6. Any idea, why this does not work?
Thanks!
Message was edited by:
chincillya

What is the JSP scriptlet code at line 6 ?
By looking at the code we can identify if there are any syntax errors, otherwise we can't really guess what might be the problem.

Problems with saving and sending info in PDF form

Hi,
I'm trying to make a PDF form in Indesign CS5, exporting it to PDF, opening in Acrobat 9 Pro, and get the form to be able to send the info I type in the fields.
So far I've had no problems making the form, exporting it, opening it in Acrobat 9 Pro, getting Acrobat 9 Pro to recognize the fields and save the form.
However, I'd opened the form and filled it out and attached it to an email, and when I got the email, the form was blank.
How do I get the form to save the data so it can be emailed?
thanks for any help.
Phil

(Acrobat Pro and Pro Extended) Choose Advanced > Extend Features In Adobe Reader.
I have somehow solved the problem. I tried using the above direction and it seems to have fixed the problem. I don't seem to get the message about not being able to save anymore and can send a completed PDF form that retains the information typed into the form.
Thanks for all who made suggestions.
Phil

Really having problems with organising documents in pages. For example, deleting pages deletes the whole section and I cannot insert a section break as its greyed out & sending an object to background deletes several pages - what the **** is going on???

Really having problems with organising documents in pages. For example, deleting pages deletes the whole section and I cannot insert a section break as its greyed out & sending an object to background deletes several pages and trying to insert a text box autmatically creates new pages- what the **** is going on??? Is this programme really this badly thought out? I thought everything apple was supposed to be intuitive!?!?!? Help.

You can not insert a section break into a textbox.
You appear to have a lot of objects with wrap set, that once you take them out of the flow of text (by sending them to the background) causes the text to reflow and contract into fewer pages. Pages is almost unique in the way it forms up pages in Word Processing mode only so long as there is text on them.
I suspect you probably have hammered away at returns, spaces and tabs as well to position things, which only works to add to the mess.
Download the Pages09_UserGuide.pdf available under the Help menu and swot up a bit on how it works.
You may find this a usueful resource as well:
http://www.freeforum101.com/iworktipsntrick/
Peter
PS There is quite a lot of programming in OSX that is far from "intuitive". Pages is easy at one level, when using the templates, otherwise it can be quite frustrating.

Problem with exporting and printing from pages to PDF

I have a problem with my Pages
My font will not be embeded in my pdf files.
I have saved as a ps file and in to the destiller and my fonts are missing.
I need to send my file to the print shop but they will not accept my file and i now understand why.
fonts are missing...
Is there a workaround.
I have no problem in Indesign or quark but pages.....
I need help
thanks a zillion

The font is coming from a notation software Sibelius 4 and is namned opus
Hmmm ... Sibelius is a music notation software and notations are marked up in MusicXML. Presumably the font file is an SFNT with TrueType splines, but it is probably not installed in OS X system folders - rather in an internal Sibelius application font folder. So presumably you do not see the font in FontBook and OS X font auditing does not apply to the font.
Sibelius exports EPS files, right? If memory serves, an EPS is still legal even if the font resource is not embedded. And in any case, we know from the behaviour that the font resource is not embedded for some reason. So how do you get Sibelius to put the font resource inside the graphic ... normally there is a button in the EPS export procedure that gives you the option to Embed All Fonts.
You do not seem to get this button, though. Or why else would you not have checked it already and the problem would have gone away already.
The next point in troubleshooting this is that you are not following the path that would let OS X detect that an external font resource is not embedded.
I go from pages-print-printer- acrobat Pro 8-save as Pdf-x
What you are doing here is telling Pages to tell OS X to generate a PostScript program within which is nested your Encapsulated PostScript program with the call to an unresolved external font resource.
So why does Acrobat Pro not detect the unresolved external font resource? Hmm ... did you try the Preflight option in Acrobat 8 Pro? It should provide information on unresolved embeddings.
I have also tried pages-print-printer- acrobat Pro 8 and save pdf as postscript and put the postscript file in destiller 8 pro with defalt setting high quality print
The whole problem with EPS and PS is that this sort of situation is possible in the first place (plus, what is worse, the PS program can include custom additions to the graphics model that then fail in the PS interpreter whence Apple GX normalizing, Adobe Distiller normalizing, and Apple Quartz normalizing). You want to get as far away from EPS and PS as possible, believe me.
So, you have not done what I posted that you should do in the first place. If I were you, I would first get rid of the problem that the EPS is making a call to an external font and then get rid of the problem that the PostScript is preserving the external call.
To get rid of the problem that the EPS is preserving an external call, simply open the EPS in Apple Preview which includes a NORMALIZER for EPS/PS, and then save out the graphic as PDF. Alternatively, if you don't trust Quartz for some reason, set up a hotfolder for Distiller, make sure the option to embed all fonts is enabled, and convert the EPS to PDF.
Now replace your EPS in Pages with PDF in Pages, and don't save PostScript to disk but save PDF to disk through the proper procedure which is File > Print > PDF > Save as PDF/X [for your custom configuration of the PDF/X-3 filter considering that no sane person in North Europe prints lowend US SWOP, we use ISO].
If you begin by telling OS X that you want PDF within which fonts are supposed to be embedded ALWAYS, then you have started the right way. Otherwise, you have not told the operating system what you want to do, and this then leads you into places where you are unlikely to have the expertise to troubleshoot problems.
So, forget placing EPS in the first place, place PDF. And forget saving PostScript to disk, save PDF to disk. If that does not sort your problem, here is the dirty solution for professional prepress.
Adobe Photoshop has an EPS rasterizer that has wide tolerances for poor PostScript programming (so does Adobe Illustrator 6 and higher by the way).
Therefore, if an EPS is posing problems, one workaround is to rasterize the EPS at high resolution in Photoshop and place that high resolution PDF in your layout.
Take care that you rasterize as 1 bit at the required resolution of the print provider, probably 2450 dpi. When you save the 1 bit as PDF, Photoshop automatically compresses to a very, very small file (don't be surprised if 15Mb compresses to something like 0.5Mb).
Rasterizing in Photoshop should not be necessary if you simply start by telling the operating system what it is you are trying to do. Then the operating system should be able to take the right decisions for you, and tell if you if finds problems it cannot resolve without turning to you.
Good luck,
Henrik
would-be technical writer

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/

Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter

Problem with Frameset and page session

All,
I am having a problem with Framesets and page session attributes. I
have a client who's application uses a three frame frameset. They
have a requirement on several pages that when a button is pushed two
different pages load into the right and left frames. The way they
are accomplishing this is that on the pages were this is required,
they are adding target="_top" to the form declaration in their JSP.
Then they store the page names they want to display in session,
forward the request to the frameset, the frameset then determines
which pages to display based on the session variables. This works
exactly how they want it to.
Here is our problem. We need to store some information in page
session attributes. We have tried to get a handle to the desired
view bean and call the setPageSessionAttribute method. However,
since we are forwarding to the frame and the frame handles displaying
the desired JSP, that view bean we had the handle to is not the one
that is created to hand the display of the JSP.
The next thing I tried was to use the request object. In the
handleBtnRequest method, I set an attribute in the request object. I
then query the request object in the beginDisplay event of the view
bean. When the frame is reset the request object does not contain
the attribute that I have set. I'm confused by this because I
thought the request object would be available to me throughout the
life of the request.
Given the above information, does anyone have any suggestions? Also,
am I going about this in the wrong manner.
The client had been storing this information in user session, which
seemed to work. However, since the data being stored dealt
specifically with data for the requested page, we felt that storing
it as page session was more appropriate.
Thanks,

The script on your page web page has some obvious bugs.. Best
fix those
first before looking to blame Flash.
Jeckyl

Whatsnew page for 3.6.17 has formatting problems with Firefox and I.E.

I just updated from 3.6.16 to 3.6.17n and the whatsnew page, displayed after Firefox restarted, has formatting problems in the lower right hand corner.
I checked it with I.E. 8 and it also shows the formatting problem.
Why wasn't this caught before the page was put into "production"?
The URL is http://www.mozilla.com/en-US/firefox/3.6.17/whatsnew/
There is a line with the text "Release Notes » Firefox Features » Firefox Help »" that is being displayed on top of other material.
I wonder what a new Firefox user or an inexperienced user would think of this? They might think that they did something wrong or, worse, they might consider Firefox had problems and they won't use it.
This reflects badly on Firefox.
One more thing, could someone make this textarea taller and wider. It is so small as to cause problems typing and proofing the material.
The URL is https://support.mozilla.com/en-US/questions/new?product=desktop&category=d6&search=whatsnew+page+for+3.6.17+has+formatting+problems+with+Firefox+and+I.E.&showform=1
How about upping the cols and rows values? They are currently rows="10" cols="40"

As you have a Power Mac you also have a alternative option to consider which is a third-party build from http://tenfourfox.blogspot.com/2011/08/601-now-available.html

Problem with Class and Classpath

Hello ME Windows Users, now before you place a wry smile on your face, I have a problem with path and classpath. Stop it, I can see you smiling!
By visiting the the last 10 pages of the forum and reading Sun installation notes, some tooldocs and by given some answers by some nice people, I have become an expert in turning off my computer, about 10 times/hr. I still am trying to make my first cup of java.
With the ME computer,
I'm unable to right click on the desktop and go to properties, advanced,
I'm unable to go go start, run, sysedit,
I'm unable to change the ms-dos window of autoexec.bat, it just shuts down.
Now before you tell me, I should of bought a different computer, the only place I can find to modify the path and classpath is in the environment which is in system configuration under tools. Here I have placed numerous configurations, like
C:\java>set path=%path%;c:\j2sdk1.4.2\bin
C:\java>set classpath=%classpath%;.;
;java_dir\bin where ;java_bin is c:\j2sdk1.4.2
.; java_dir\bin; %path% where ;java_bin is c:\j2sdk1.4.2 and the list goes on.
But, I know you are still smiling, the % signs comes up in a dialog box, saying too many, and will not convert the text to the environment to be saved when I close down for the tenth time in the last hour.
Can someone help me before I make a real cup of coffee and accidentally drop it on the ME box.
Have a laugh on me Mik.

C:\java>set path=%path%;c:\j2sdk1.4.2\binGood
But it is no good because it has to many % and a dialog box appears, saying you have too many parameters.
Are you saying I have to shutdown again to answer your ?
From the HELP menu-
To confirm startup commands line by line
Click Start, and then click Shut down.
Click Restart, click OK, and then press and hold the CTRL key until the Windows Startup Menu appears.
Enter the number for Step-by-step confirmation, and then press ENTER.
For each command you want to run, press Y.
If the command runs successfully, you are prompted with the next command.
If the command does not run successfully, you receive an error message.
To skip a command, press N.
Mik

Problems with Saved Watermarks - Wrong Font Size

Hi,
I am having problems with "Saved" Watermarks, as when I selected them they have the wrong font size.
I created a Watermark (Draft) to be placed on the lower right
corner of a PDF, using font Arial-10. This watermark has been save using the "Save Settings..." in Watermarks.
When I add this this "saved" watermark to a new PDF, the font size is wrong
(much much bigger), even though the Add Watermark windows reports Arial-10. Only by a selecting a different font size and changing it back to the saved font size (10) I get the correct Font Size in the PDF.
I had a similar problem with the placement, but managed to solve that by setting the Preference>User&Guide to the used Unit (Page&Ruler = centimeters). But for the font size I can't find anything in the preference.
Any Help or Suggestions ?

Hi,
Sorry forgot to add, I am using
Acrobat Professional 8.1.2 on Windows XP Prof.
Cheers
Johannes

Problem with trigger and entity in JHeadsart, JBO-25019

Hi to all,
I am using JDeveloper 10.1.2 and developing an application using ADF Business Components and JheadStart 10.1.2.27
I have a problem with trigger and entity in JHeadsart
I have 3 entity and 3 views
DsitTelephoneView based on DsitTelephone entity based on DSIT_TELEPHONE database table.
TelUoView based on TelUo entity based on TEL_UO database table.
NewAnnuaireView based on NewAnnuaire entity based on NEW_ANNUAIRE database view.
I am using JHS to create :
A JHS table-form based on DsitTelephoneView
A JHS table based on TelUoView
A JHS table based on NewAnnuaireView
LIB_POSTE is a :
DSIT_TELEPHONE column
TEL_UO column
NEW_ANNUAIRE column
NEW_ANNUAIRE database view is built from DSIT_TELEPHONE database table.
Lib_poste is an updatable attribut in TelUo entity, DsitTelephone entity, NewAnnuaire entity.
Lib_poste is upadated in JHS table based on TelUoView
I added a trigger on my database shema « IAN » to upadate LIB_POSTE in DSIT_TELEPHONE database table :
CREATE OR REPLACES TRIGGER “IAN”.TEL_UO_UPDATE_LIB_POSTE
AFTER INSERT OR UPDATE OFF lib_poste ONE IAN.TEL_UO
FOR EACH ROW
BEGIN
UPDATE DSIT_TELEPHONE T
SET t.lib_poste = :new.lib_poste
WHERE t.id_tel = :new.id_tel;
END;
When I change the lib_poste with the application :
- the lib_poste in DSIT_TELEPHONE database table is correctly updated by trigger.
- but in JHS table-form based on DsitTelephoneView the lib_poste is not updated. If I do a quicksearch it is updated.
- in JHS table based on NewAnnuaireView the lib_poste is not updated. if I do a quicksearch, I have an error:
oracle.jbo.RowAlreadyDeletedException: JBO-25019: The row of entity of the key oracle.jbo. Key [null 25588] is not found in NewAnnuaire.
25588 is the primary key off row in NEW_ANNUAIRE whose lib_poste was updated by the trigger.
It is as if it had lost the bond with the row in the entity.
Could you help me please ?
Regards
Laurent

The following example should help.
SQL> create sequence workorders_seq
2 start with 1
3 increment by 1
4 nocycle
5 nocache;
Sequence created.
SQL> create table workorders(workorder_id number,
2 description varchar2(30),
3   created_date date default sysdate);
Table created.
SQL> CREATE OR REPLACE TRIGGER TIMESTAMP_CREATED
2 BEFORE INSERT ON workorders
3 FOR EACH ROW
4 BEGIN
5 SELECT workorders_seq.nextval
6    INTO :new.workorder_id
7    FROM dual;
8 END;
9 /
Trigger created.
SQL> ALTER SESSION SET NLS_DATE_FORMAT = 'DD-MON-YYYY HH24:MI:SS';
Session altered.
SQL> insert into workorders(description) values('test1');
1 row created.
SQL> insert into workorders(description) values('test2');
1 row created.
SQL> select * from workorders;
WORKORDER_ID DESCRIPTION                    CREATED_DATE
           1 test1                          30-NOV-2004 15:30:34
           2 test2                          30-NOV-2004 15:30:42
2 rows selected.

Problem with dreamweaver and Flash

Hi, maybe someone can help me, i have any problem with
dreamweaver and flash, i have a page and i have a menu and
sub-menu, and the same page i have a category en flash 550 x 700 (
photography and more... ) but when the menu to unfold
the menu to see under flash and it cant see ( sorry my
english is bad.... i hope you can understand me, and help me.. )
i dont now why always flash ever stay up, or first, and
another information under flash... this a problem... if you have
menus...
thanks.... have nice day.....

This is a drawback of using flash or any other active
content. By default, all active content including flash will
display over every other content and thats why your menu stays
under the flash movie. Some people make the flash background
transparent to show content under the flash movie, but that will
not work for menu items.
I would suggest that you make the menu such that it does not
overlap with the flash movie.

Problems with saving and inserting pages

Similar Messages

Maybe you are looking for