Problems with the line chart - dashboard

I have a problem in the line chart in the dashboard SP4.
Clicking on the legend of the graphic , the serie (line) disappears. Clicking again in the legend, the line appears but the markers don’t.
Someone knows how to solve this problem?
Follow the examples.
Thanks.

Hi Jane,
This is definitely the tool problem.
Might be you can try restarting xcelsius or your computer (sometimes it works, really !)
Just out of curiosity, why do you want to clink on legends.

Similar Messages

Intermittent problem with the line

I have an intermittent problem with my line which crackles or you miss parts of a conversation because voices spoken or listened to keep coming and going all the time or the phone cuts out altogether
Telephone the help line which said that the line was OK at that moment as they did the other time I called keeps on happening on a daily basis every time we get a call.
Next door neighbour and other neighbours around this close all linked to the same local bt or open reach cabinet all tell me they have the same problem.
Neighbours called their own phone company who rent the line off of BT who got an open reach engineer out the next day and found that the local exchange or cabinet next to the house across the road from me all the phone line coverings have corroded away and that the wires are all damaged and corroding away or rotting away.
So the local road (culdisack) has to be dug up and the exchange and wires have to be replaced from that junction box to the next junction box or exchange, what i want to know is when will this be done as all the neighbours and i have been reporting it to BT for ages but it was not till next door got their company to investigate was the problem found.
How long till we have to wait for a repair and better lines back to a good service, Months, years. when?
It would not be so bad but i have a lifeline connected to my phone so if i am in trouble it calls for help but with the fault with the line half the time it cannot get a single message or call out and before now i have been left on the floor for ages before someone came back home to get me off the floor as the box just said the phone line was disconected and could not get a dial tone or call out.
Tim

If you would like to contact one of the UK based BT Care Team who moderate this forum, they should be able to find out what is going on.
They can be contacted using this link BT Care Team
They normally respond by phone or e-mail, within three working days, however you should get an immediate confirmation, with a tracking number.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Problems with SVG line charts based on PL/SQL returning SQL

Dear all - I wonder if anyone can tell me whether this problem is likely to be fixed at some point?
It relates to the fact that you can't get more than one series on a chart where the SQL is returned from PL/SQL.
It is a huge issue for us when trying to create complex, dynamic charts, which are simple enough in PL/SQL, but end up quite nightmarish in pure SQL.
Although we have implemented Maani SWF (Flash) charts as a workaround, users don't like them as there's no 'save as...' or copy+paste and they seem to print very badly indeed.
Here's part of a post from last May with more detail:
"If I take a really simple table like this:
CREATE TABLE "CHART_TEST"
( "X" DATE NOT NULL ENABLE,
"Y" NUMBER(5,0) NOT NULL ENABLE,
CONSTRAINT "CHART_TEST_PK" PRIMARY KEY ("X") ENABLE
and populate it with:
X Y
2006-01-01T00:00:00 1
2006-02-01T00:00:00 2
2006-03-01T00:00:00 3
2006-04-01T00:00:00 4
2006-05-01T00:00:00 5
2006-06-01T00:00:00 6
2006-07-01T00:00:00 7
2006-08-01T00:00:00 8
2006-09-01T00:00:00 9
2006-10-01T00:00:00 10
I can create a chart with a single series using syntax something like:
begin
return 'select null link, x label, y value
from chart_test';
end;
and this works fine. However, if I add a second series:
begin
return 'select null link, x label, (y + 1) value
from chart_test';
end;
then the whole of the chart region blanks out.
There's an example at:
http://htmldb.oracle.com/pls/otn/f?p=15491:1"
Many thanks,
John.

On some, but not all SVG line charts, I had trouble when some values are ZERO.
Putting a CASE WHEN var = 0 then 0.05 ELSE var END in the select statement
fixed those situations.
I had missing lines when the number of data points in a series exceeded the default number of 15, and I did not set in the series configuration to a number equal to or higher that the number of data points in that series.
And I had one instance, where a couple missing lines reappeared when I exited
the browser and app completely and restarted the app.
All these comments apply to ver 1.6x and 2.0x

Indesign issues. Impossible to fill a form created by the pen either with color either with an image. The image is there but is invisible. Same problem with the line (impossible to color it or to change the tickness. Is there anything to change in the pre

I have recently installed Indesign CC (I had the CS 5.5). I have some issues in doing simple things such as fill in a forma created with the pen either with a color either with an image. The image is there but is invisible. same issue when I want to draw a line. Impossible to color the line and when I increased the thickness, it was creating a sort of wrap around the shape. have you ever encountered this kind of issue ? Thanking the community for his help.

You will probably get better help in InDesign
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Downloaded Mt Lion. Now my facetime launches then quits with message that there is a problem with the C_L Kernel Plugin. Everything else works just fine. I can get on line etc.

I have have an early 2008 imac 8,1 It has been a good machine no problems. UNTIL we downloaded Mt Lion. We can no longer use facetime. We click on the icon it comes up, tries to connect then it disappears with the message that there was a problem with the C_L Kernel Plugin. We can go on line without difficulty, everything else seems to be working. Searching the internet shows that others have had the same problem with Mt Lion. But so far I haven't found a solution. We have wiped the drive reloaded snow leopard then downloaded Mt Lion again. We put in a NEW hard drive and reloaded snow leopard then Mt Lion. We have changed out ram using apple ram. But we still get the same result. Everything works except for Facetime. Is there some patch we have missed? Facetime DOES work on our ipads without a hitch so I doubt it's the internet connection. We've tried the imac both wirelessly as the ipads run and hardwired and get no where fast. So any help at all would be appreciated. We live in the boonies, the nearest mac repair is over 150 miles away so this is pretty nuch a do it myself affair. We know the machine is old by most standards today. But we pretty much run our machines until they can't power up. So we'd like to get this one back on its perch so to speak with its face time working.
Thank you ahead of time for any advise help given.

A log may help determine what the issue is ...
Open the Console app located in HD > Applications > Utilites
Select: System Diagnostic Reports on the left.
Copy and paste the most recent kernel panic or crash log in your Reply.

Hi, I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to c

Hi,
I'm having a problem with the stabilization all of a sudden. I did an analyze. The amount of shake isn't terrible but it's there. There are no squiggly lines in the clip I'm trying to stabilize. As you can see in the screenshot that it allows me to click the "Smooth clip motion" but the slider is not there for zoom. Any ideas why this is happening all of a sudden? It happens on all clips in this event. The entire event was analyzed after importing.

What program are you using for this editing?
We can ask a Host should move your query over to that forum.

Problem with the progress line in MS Project

Hi there,
I have a question about the progress line in MS Project.
My boss asked me to see how far we were with the work, so I inserted the column '% Complete' and then the progress line.
Now my boss has a problem with the layout and I don't know how the fix it. The problem is at line 43 and 44, where the progress line indicates that we are behind on that group of tasks. But is it possible for the progress line to not indicate it on lines
43 and 44 but only on lines 45 to 50? So my question is if it's possible to make the progress line go down (vertically) over line 43 and 44 instead of jumping to the back?
It would be much more simple if I could insert lines 43 ad 44 as text but not as a task, so that it just counts as a title of some tasks but nothing more than that. Is that possible in Project?
(Lines 45 to 50 are subtasks for line 44, and 44 is a subtask for 43. So line 43 is the main task.)
Normally there was a picture here but I couldn't upload it because my account is not yet verified... So hopefully you can understand the problem with the text.
If anyone could give my some advice or the solution, that would be great!
Thanks in advance!

Hi Thunderbal66--
Basically your activity 43 is late because the sub tasks are also late. Thus MS Project shows the situation by moving the progress line backward. The progress line is automatically displayed based on your project progress, there is no way to manually change
it unless you update your project.
I think the question is not there. This is more a matter of project governance and transparency: why not showin that a project is late when it is late and taking the appropriate corrective actions?
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Lightroom 5, Mac. Problem with the Radial Tool. Marquee Lines disappear.

Lightroom 5 Mac. Problem with the Radial Tool. I use this tool a lot. I must have hit a hot key by accident because between photos the marquee lines have disappeared and i don't know how to get them back. Without the marquee lines there I cannot rotate or expand the radial tool.

I have attempted to uninstall, empty trash and a fresh download from Adobe. The problem is still there...

I have an iPad MD371Y. Since when I installed the iOS 6 I'm fading problem with the WiFi connection. The line fall everytime the device go on automatic stand by (if i do not touch it for 5 min). Can somebody be of Help?

I have an iPad MD371Y. Since when I installed the iOS 6 I'm fading problem with the WiFi connection. The line fall everytime the device go on automatic stand by (if i do not touch it for 5 min). Can somebody be of Help?

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Problems with horizontal lines on the iMac. Someone knows the solution?

For several months my Imac has horizontal lines have been growing. Problems with horizontal lines on the iMac. Someone knows the solution?

You have 14 days to return the computer w/no questions asked. Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.
That being said, no new Mac comes w/Snow Leopard which your profile confirms you have.
Mac OS X (10.6.8)

Problems with Flash Line Graphs

I have two problems with the new Flash Line Graphs in APEX 3.1
1. I have created a query that returns a set number of rows. Sometimes the VALUE for a specific row might be null. When this occurs the LABEL data does not show up on the X axis. I want the LABEL data to show up no matter what. How do I accomplish this?
2. Related to the above query. When the VALUE field is null for 3 records (or more) in a row, not only does the LABEL data for those records not display, the VALUE and LABEL data for the records that appear in the set after these 3 records also do not display. If one or even two null VALUE fields appears in a row, things are still OK. What do I need to do to get all my data to display?
Any help would be appreciated.
THANKS
Raymond

Raymond,
For the Interactive report chart issue, could it be related to this?
Re: Apex 3.1. Interactive Report. Questions and Problems.
Interactive Report. Chart. Seems to be bug...
- Christina

Is anyone having problems with the Health App and Withings?

After upgrading to ios 8.1 I am still having a problem getting my Withings Health Mate data to correctly update my Healt Dashboard. The information that does show up on the different Dashboard widgets is way off. For example, I today walked 2400 steps according to Withings, but the Health Dashboard shows 10,700 steps (720,000 in smaller print on another line). It further shows my daily average at 313,000 steps! Ridiculous.
Walking/Running distance for the days shows 22.5 miles with a daily average of 108 miles.....I'm not Barry Allen/The Flash.

My problems with the Healt App are all over the map. The information on Withings Health Mate is totally accurate, and updates immediately. I have their scale (since 2011) and wireless blood pressure monitor. Also, I find the heart rate senson on the iPhone 6 to work well, every time.
This issue for me is with Apple's Health app. I get ridiculous readings on the Dashboards. For example, it shows my daily average in steps as 170,688, and miles walked at 80. Hardly! Additionally, the Dashbord widgets will disappear/reappear for no reason. I have tried switching the priority of data sources for the steps dashboard between Withings and my iPhone 6 (because it is indicated that the top source governs the dashboard info), to no avail.
Lastly, I don't know how to interpret the infomration on the individual dashboards. On the same line as the word "Steps" there is a number, i.e. 14,272 steps, and just under it the word "Today." However, when I switch from "Day," "Week,," "Month," and "Year," those number don't change. Below the word Today is a number (which changes all the time), and at the bottom of the widget, just above the month (October now) is the number 1,149,749. Nice.
I would like to get the Apple Watch next year, but if the Health App cannot be fixed I may not.

Many problems with the 'Export to Text' (.txt) in CR Xi

Hi,
I have listed many problems with the 'Export to Text' (.txt) function of CR Xi.
These problems are related to this export format only (meaning everything works fine in the Viewer or in the 'Export to PDF')...
- Multi-columns layout do not export as Multi-column (export only a one column);
- Numeric values with parenthesis for negative values or with a fix currency sign at the leftmost position are not exported correctly;
- Fields having a Suppress formula which is "WhilePrintingRecords" do not appears when exported;
- Fields with 'Suppress double value' checked are not always suppressed when exported to Text.
- 'Keep Group Together' flag is not working.
- 'Reset Page Number After' simply does not works when exported to text;
- 'Keep object together' on TextBox/Section is not working.
- Whenever a group is ending on the last line of a page, the the following page as the same Group header as the previous group with no records until the page is filled, then the PageBreak and PageHeader is missing but the records of the following group appears.
I would like to know what is the status of the 'Export to Text' function (is it a deprecated function not supported anymore???).
If still supported, when will these bugs be fixed???
Thanks

Hi Rene
Export to Text is supported till date. Crystal Reports 2008 also supports this with Keep together working however when I tried with format with multiple columns, it didnot show up in the exported text file.
Regards
Sourashree

Communication Problem with the second battery

Hello,
In Lenovo Solution Center it says that there is communiction problem with the second battery. I already had this problem some months ago, back then it didn't charge the second battery. I got a new one and it worked again. Now it says the same thing "communication problem", but i can charge the battery and I also can't find any other sign of something not working. But still- it seems weird that the program tells me something is wrong. Can somebody help me?
Thanks Lina

Hi, Lina
What is the machine type and model of your computer? Also, what operating system are you running?
Thanks in advance,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Problem with the hierarchial fields in a Purchase order xml report

Hi,
I am having a problem with the hierarchy problem. We are populating attribute 15 of a PO header. some times it can be null. FYI, we are using 11.5.10 instance where oracle supports direct PO template rather than having a rdf file.
And now in the xml report, if attribute15 of po header is not null then it is fine.
But if attribute15 is null, then the template is picking from the next available attribute15 that is from the po lines. As the line level group of "LINES" is between the "PO_DATA" (header group), hence the template is checking for next available attribute15.
Can any one please suggest how to design the template where we can make the template to check only for that tag at the header level group rather than the line level group tag?
Thank You in advance.
Regards,
Srinivas.

Hi
Incase you want to transfer attachements from SRM to R/3, then you try implementing the BADI in SRM side. The BADI which will help in this case is
BBP_CREATE_PO_BACK BADI.
Please read the standard SAP documentation of this BADI using SE18 Transaction, before making any code changes.
Few Important SAP OSS notes to refer in this case ->
Note 989184 - Transferred shopping cart with internal attachments
Note 550071 - FAQ: EBP - Shopping Cart
Note 916347 - Transfer shopping cart with internal attachments
Note 1001130 - FAQ - Attachment questions (Buyside)
Few useful links ->
http://help.sap.com/saphelp_srm50/helpdata/en/49/b32640632cea01e10000000a155106/frameset.htm
Re: Attachments to backend
Re: Document Attachments in Shopping Cart
Re: Attachment in SRM
Re: SRM Documents and Attachments
Re: Limit in Attachments of an item in Shopping Cart
Re: return delivery text from material document is not passed to SUS

Do let me know, incase you face any problems.
Regards
- Atul

Problems with the line chart - dashboard

Similar Messages

Maybe you are looking for