Problems with url-bindings when redeploying on Oracle 9iAS

Hello!
I'm working on a project where we're having a development server that runs Oracle 9iAS (9.03). This server is used both for system-testing and for continuous integration using Cruisecontrol. The application that we deploy is an ear-application with several web-applications and ejb-components. We have in order to make these two deployments work together defined two different application servers on the console and deployed on both of them. We have also specified prefixes, like /cc/ on the url-bindings so that we can access all the web-applications.
Our problems usually arise when Cruisecontrol does a redeploy of what it has built before it's going to test it. It uses dcmctl for this and it usually runs successfully, but sometimes the application server resets the url-bindings so that all the web-applications go to the root. Other times it removes the whole application and I've even seen it show out-of-memory errors even though it still has about a gigabyte of memory available. I don't think this is related to that single server because I've seen the same thing happening on our production-server the first time I was going to redeploy through the console-application.
Have anyone else had the same problem? (...and hopefully found a solution to it?)
It's quite annoying for us because this screws up Cruisecontrol for us at least once a day and I'm not sure how good this is for a production environment.
Regards,
Bjorn Vidar Boe

Does anybody know if Financial Brokerage Service(FBS) can be deployed on Oracle 9iAS using OEM. I got the following error when I tried to deploy the ear file:
Deployment failed: Nested exception Root Cause: Error loading web-app 'ibfbs-web' at C:\Ora9ias\j2ee\FBS\applications\ibfbs\ibfbs-web: Unknown assembly tag in file:/C:/Ora9ias/j2ee/FBS/applications/ibfbs/ibfbs-web/: <ejb-local-ref>; nested exception is: java.lang.InstantiationException: Error loading web-app 'ibfbs-web' at C:\Ora9ias\j2ee\FBS\applications\ibfbs\ibfbs-web: Unknown assembly tag in file:/C:/Ora9ias/j2ee/FBS/applications/ibfbs/ibfbs-web/: <ejb-local-ref>. Error loading web-app 'ibfbs-web' at C:\Ora9ias\j2ee\FBS\applications\ibfbs\ibfbs-web: Unknown assembly tag in file:/C:/Ora9ias/j2ee/FBS/applications/ibfbs/ibfbs-web/: <ejb-local-ref>; nested exception is: java.lang.InstantiationException: Error loading web-app 'ibfbs-web' at C:\Ora9ias\j2ee\FBS\applications\ibfbs\ibfbs-web: Unknown assembly tag in file:/C:/Ora9ias/j2ee/FBS/applications/ibfbs/ibfbs-web/: <ejb-local-ref>
Thanks ! Hi -
Can you check and see what version of 9iAS are you using?
The ejb-local-ref tag is a new tag introduced in the J2EE 1.3 specification - so you will need to be using the Oracle9iAS v9.0.3 release which is J2EE 1.3 compatible.
If you are using the v9.0.2 release then you will need to upgrade to v9.0.3
cheers
-steve-

Similar Messages

Problem with output data when calling into Oracle stored procedure

I have a problem that I think I've seen posted by others, but I can't find it anywhere on the forum. Here's what it looks like:
I have a application that sends a query parameter called custID in a URL to a JSP page.
http://domain.com/decrypt.jsp?custID=ewsw
The JSP subsequently calls into the method below to run a decryption stored procedure on an Oracle db. The custId parameter works fine from most clients. However, I have seen the decryption stored procedure return invalid information on some clients in the following case:
http://domain.com/decrypt.jsp?custID='eirwx
Here is how I define my call to the DCUSTID (decryption stored procedure):
public long dCustID(String sCustID)throws SQLException {
CallableStatement cs = null;
try {
long nCustID = 0;
if(conn == null || conn.isClosed()) {getLocalConnection();}
String sp = "BEGIN DCUSTID(?,?);END;";
cs = conn.prepareCall(sp);
cs.setString(1, sCustID);
cs.registerOutParameter(2,java.sql.Types.NUMERIC);
cs.execute();
nCustID = cs.getLong(2);
return nCustID;
}finally { release(cs); }
I have not been able to find a problem with the stored procedure (although Im not counting that out). Is there any way that the jsp or the code above is corrupting the data before it gets to the stored procedure? I'm very suspicious of the single quote at the begining of the custID query string parameter.
Thanks

>
The JSP subsequently calls into the method below to
run a decryption stored procedure on an Oracle db.
The custId parameter works fine from most clients.
However, I have seen the decryption stored procedure
e return invalid information on some clients in the
following case:
The back tick doesn't matter.
How do you know that the routine that you posted returns invalid information? Are you printing the value retreived before you return in the code that you posted? That is the only way to tell if that code is the problem vs some translation problem in something else.
And what do you mean by 'invalid'? It does return a numeric value right? Is it negative? Or so large that it couldn't be a key? Or what?
The input parameter to the stored proc is a varchar and not a char correct?

Problem with URL:s containing scandinavian characters (Office 2013 / Firefox / SP 2010)

We are encountering problems with document opening when URL contains scandinavian characters (ä,ö). This issue occurs only with Office 2013 when using Firefox. With IE it works just fine. And Office 2010 works nicely as well.
Error message: "We can't connect to 'https://intra.../Test powerpoint.pptx' Please make sure you're using the correct web address".
This issue only occurs when document or document set name contains scandinavian characters. If I rename it, document opens without any problems.
Any idea how I could fix this?

Hi Law, try changing the settings in the library to "open in client application." You should also read the following links for solutions:
http://sharepoint.stackexchange.com/questions/16938/why-is-word-document-created-from-template-saved-locally-instead-of-to-the-docu
http://social.technet.microsoft.com/Forums/sharepoint/en-US/ec048a1f-e6cc-481d-8f46-308823568b56/cannot-save-documents-to-sharepoint?forum=sharepointadminprevious
cameron rautmann

Problem with URL File download

Hi every one i am facing a problem with URL File read Technique
import java.awt.Color;
import java.io.DataOutputStream;
import java.io.File;
import java.io.FileOutputStream;
import java.io.InputStream;
import java.net.URL;
import java.net.URLConnection;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JProgressBar;
public class JarDownloader
 boolean isSuccess = false;
 public JarDownloader(String url)
 downloadJar(url);
 public boolean isDownloadingSuccess()
 return isSuccess;
 private File deleteExistingFile(String filename)
 File jarf = new File(filename);
 if(jarf.exists())
 jarf.delete();
 return jarf;
 public static void main(String args[]){
 new JarDownloader("url/filename.extension");
 private void downloadJar(String url)
 try
 URL jarurl = new URL(url);
 URLConnection urlc = jarurl.openConnection();
 urlc.setUseCaches(false);
 urlc.setDefaultUseCaches(false);
 InputStream inst = urlc.getInputStream();
 int totlength = urlc.getContentLength();
 System.out.println("Total length "+totlength);
 // If the size is less than 10 kb that means the linkis wrong
 if(totlength<=10*1024)throw new Exception("Wrong Link");
 JFrame jw =new JFrame("Livehelp-Download");
 JPanel jp =new JPanel();
 jp.setLayout(null);
 JLabel jl = new JLabel("Downloading required file(s)...",JLabel.CENTER);
 jl.setBounds(10,10,200,50);
 jp.add(jl);
 JProgressBar jpbar = new JProgressBar(0,totlength);
 jpbar.setBorderPainted(true);
 jpbar.setStringPainted(true);
 jpbar.setBounds(10,70,200,30);
 jpbar.setBackground(Color.BLUE);
 jp.add(jpbar);
 jw.setContentPane(jp);
 jw.pack();
 jw.setResizable(false);
 jw.setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
 jw.setLocationRelativeTo(null);
 jw.setSize(220,150);
 jw.setVisible(true);
 int readlngth=0;
 int position=0;
 byte[] readbytes = new byte[totlength];
 while(totlength-position > 0)
 readlngth = inst.read(readbytes,position,totlength-position);
 position+=readlngth;
 jpbar.setValue(position);
 File jarf = deleteExistingFile(filename);
 jarf.createNewFile();
 //FileWriter fwriter=new FileWriter(jarf,true);
 FileOutputStream fout = new FileOutputStream(jarf,true);
 DataOutputStream dout = new DataOutputStream(fout);
 dout.write(readbytes);
 dout.flush();
 dout.close();
 inst.close();
 jw.setVisible(false);
 jw.dispose();
 isSuccess=true;
 }catch(Exception ex)
 isSuccess=false;
}From the above code i received the total length of the PAGE content (i.e here url is a file) when i tried to find the size of that file it return -1.
please help me

I think the real problem is that you don't check the return value from read (it's probably less than data.length indicating an incomplete read). Isn't there a readFully somewhere?

Problems with WAS 6.40 Installation on Oracle - Phase 11 of 34

Hello,
Problems with WAS 6.40 Installation on Oracle (Phase 11 of 34)
with the installation of the Web Application server 6,40 SR1 on a Oracle server I get in phase 11 of 34 (Create Oracle Database) the following error-message:
CJS-00084 - SQL statement or script failed. Diagnosis: Error message: ORA-12547: TNS:lost contact.
error while loading shared library: libodm9.so : cannot open shared object file: No such file or dirctory.
Best Reagrds,
Ralf Steffens

hi Ralf
i've found one composite note for Oracle <a href="https://websmp203.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001366932002">505630</a>
hope this solves...
Symptom
ORA-12547: TNS:lost contact
Brbackup, brarchive, brrestore or brconnect may terminate with errors similar to the following:
BR301E SQL error -12547 at location BrDbConnect-1
BR301E SQL error -12547 at location dbf_info_get-1
Sapdba returns the following error, for example:
SAPDBA: ORACLE error -12547 occurred while checking instance status!
The R/3 work processes or R3trans return the following error at Connect:
C *** ERROR => CONNECT failed with sql error '12547'
Other terms
TNS-12547, TNS-00517
Reason and Prerequisites
As part of the Net8 Connect, a program such as the R/3 kernel, R3trans, svrmgrl, sqlplus or ODMA establishes a connection to the Oracle database. If the connection terminates due to problems at the server end, it can result in ORA-12547.
Additional information for the error is often available in sqlnet.log. In many cases, other messages that are not reported by all tools precede ORA-12547. If ORA-12547 occurs when the ODMA accesses the old Oracle-Home during a database upgrade, for example, it may make sense to temporarily restart ORACLE_HOME on the old Oracle-Home for test purposes and then to execute sqlplus or svrmgrl.
Even if sapdba or the BR tools terminate with an ORA-12547 when calling sqlplus or svrmgrl recursively, you should, for test purposes, call sqlplus or svrmgrl manually with the operating system user that was used.
Hopefully, a more informative error message will appear in addition to ORA-12547, for example:
ld.so.1: oracleC11: fatal: relocation error: file
 /oracle/C11/817_64/libx8.so: symbol ksunsga_:
 referenced symbol not found
If you find accompanying error messages of this type, start a note search with the corresponding search terms since we are often aware of the problem and a solution may already be available. If you do not find any significant error messages or a suitable note, check the following possible causes for ORA-12547:
1. UNIX: Incorrectly linked Oracle tools
2. UNIX: Problems with XPG4 compliance and s-bit
3. Too many requests to the listener at the same time
4. HP-UX, Oracle 8.1: Missing OS patch
5. Use of CRYPTO parameters in sqlnet.ora
6. AIX: I/O Async is deactivated
7. Resource problems
8. The CONNECT_TIMEOUT_LISTENER parameter in listener.ora is too low
9. Activated Oracle trace
10. UNIX: Incorrect oracle executable authorization
11. SOLARIS: LD_LIBRARY_PATH set when you call ODMA
12. AIX: Problem with post/wait kernel enhancement
13. UNIX: Problems with the libobk library
14. SOLARIS: Incorrect search sequence in the path variable
15. UNIX: Conflicts between 32-bit and 64-bit files
Solution
1. Relink the Oracle software as ora<sid> with
cd $ORACLE_HOME/rdbms/lib
make -f ins_rdbms.mk install
 or
relink all
1. See Note 88884.
2. If individual work processes terminate with ORA-12547 when you start an R/3 instance, See Note 131561.
3. See Note 399610.
4. You can set security parameters that begin with SQLNET.CRYPTO_ in sqlnet.ora as part of the Advanced Security Option. Oracle releases < 8.1.7 cannot process these parameters correctly and result in ORA-12547. In this case, delete these types of parameters from sqlnet.ora.
5. If I/O is deactivated on AIX Async, the Net8 Connect fails with ORA-12547. In this case, activate I/O Async by using smitty.
6. Insufficient resources such as available memory on the database server can cause ORA-12547. For more information, see 384839.
7. In individual cases, it may make sense to increase the CONNECT_TIMEOUT_LISTENER parameter in listener.ora (for example, by 5 seconds, so from 10 to 15). Although a value of 10 seconds should usually be sufficient to establish a connection.
8. Delete the log files written by the Oracle trace in accordance with Note 92537.
9. Check to see whether the executable in $ORACLE_HOME/bin has the "rwsr-s--x" authorizations and the ora<sid> owner and correct this if necessary.
10. If you call ODMA on SOLARIS as part of a database upgrade and if LD_LIBRARY_PATH is set explicitly (on the lib directory of the target release), calling the old Oracle software through ODMA may fail with ORA-12547. If you use the old ORACLE_HOME to list sqlplus or svrmgrl, you get the following error:
ld.so.1: oracle<sid>: fatal: relocation error:
 file /oracle/<sid>/817_64/libx8.so: symbol ksunsga_:
 referenced symbol not found
ORA-12547: TNS:lost contact
 In this case, permanently delete LD_LIBRARY_PATH from the environment. This does not have any negative effects since the libraries are automatically found in the correct directories as of Oracle 8.1.
 If problems occur with the post/wait extension on AIX, the following type of errors will be displayed:
exec(): 0509-036 Cannot load program oracleC11 because of the
following errors:
 0509-130 Symbol resolution failed for oracle because:
 0509-136 Symbol pw_post (number 2524) is not exported
 from dependent module /unix.
 0509-136 Symbol pw_wait (number 2525) is not exported
 from dependent module /unix.
 0509-136 Symbol pw_config (number 2526) is not exported
 from dependent module /unix.
 0509-192 Examine .loader section symbols with the
 'dump -Tv' command.
ORA-12547: TNS:lost contact
1. If the libobk library was created incorrectly, the following type of errors may occur:
/oracle/C11/817_64/bin/oracle: /sbin/loader:
 Fatal Error: Cannot map library libobk.so
/usr/lib/pa20_64/dld.sl: Unable to find library
 '/oracle/C11/lib64/libobk.sl
exec(): 0509-036 Cannot load program oracleC11 because of the
 following errors:
0509-150 Dependent module /oracle/C11/817_64/lib/libobk.a(shr.o)
 could not be loaded.
0509-152 Member shr.o is not found in archive
ORA-12547: TNS:lost contact
 Check to see whether libobk exists and, if it is a link, that it points to a valid object. Note 142635 contains more information about this. The libobk link may point to this if a libsbtsh8.* file exists in the Oracle library directory. If you are using a third-party Backint tool, contact the relevant supplier, since libobk often has to point to a backint-specific library.
1. If an error such as
ld.so.1: ./svrmgrl: fatal: libucb.so.1: open failed:
 No such file or directory
ORA-12547: TNS:lost contact
 occurs, the PATH has probably been set incorrectly. For more information, see Note 44361.
1. If an error such as
ld.so.1: oracle<sid>: fatal: <library> wrong ELF class: ELFCLASS64
ORA-12547: TNS:lost contact
 concerning "wrong ELF class" occurs, check whether the <library> mistakenly has a different bit size than the tool that was called. You can determine this using
file <library>
file <tool>
 All the files involved must uniformly be either 32-bit or 64-bit.

Regards
Arunkumar

Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it drops a message again and again, preventing me to do anything about the setting.

Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it dropps the message again and again, preventing me to do anything about the setting.

A Fix for "Your network preferences have been changed by another application" Error
In the Library/Preferences/SystemConfiguration/ folder delete the following:
com.apple.airport.preferences.plist
NetworkInterfaces.plist
preferences.plist
com.apple.nat.plist
You will have to re-configure all your network settings since deleting.
(10.4.10)
Use Software Update to update your OS to last version of Tiger. Install all the other updates that goes along w/it.

I am suddenly having a problem with my iMac - when I try to restart or shut down, it hangs on a gray screen, and I have to hard reset to turn it off. How do I fix this?

I am suddenly having a problem with my iMac - when I try to restart or shut down, it hangs on a gray screen, and I have to hard reset to turn it off. How do I fix this?

http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup

Hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

Try reinstalling Combo Update.
http://support.apple.com/kb/DL1676
Best.

I have a problem with my ipad when choosing software update it is continously loading the message checking for updates without showing any results

I have a problem with my ipad when choosing software update it is continously loading the message checking for updates without showing any results

Hello SuzMiller
Check out the article for the troubleshooting steps for issues with email on your iPhone and iPad.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Problems with color matching when printing...

Hi, I work for a small family business in the P.O.P. industry. We currently have myself and one other designer, we both take illustrator files that have come from the graphic design firm that we contract with and get them ready to print on our Vutek QS3200. However ever since acquiring the printer we have begun to run into problems with the colors when printing. When the files are exported off of my computer, I use either .tif or .pdf files, they print as they should, the colors seem to match the proof and everything goes smoothly. However when the other designer exports a file, he tends to do mainly pdfs, the colors tend to be extremely different from where we want them. Also we will get very strange results, such as yesterday he kept getting a faint yellow 1/2" border around his prints. After I believe 3+ hours of him trying, I was given the original CD and instructed to try. After 15-20 minutes of making the changes that we needed to make (adding a new price point) and ripping, mine printed perfectly.
We both use Macs, both have CS3 Design standard, only differences between the computers are mine is newer and a bit faster, and I'm running OS 10.5.6 and he has 10.4. He has also at some point loaded various color profiles, whereas my CS package is just whatever the default is when I loaded it. When we were being trained he grabbed the color profile off of the Colorburst RIP server and loaded onto his computer, plus I believe he has a couple for freelancing purposes on there as well. My thought is that these profiles are somehow corrupting the files that are going through that computer, but I honestly am lost with it at the moment. He believes the problem lies within the fact that he does not have the newer OS, I honestly cannot see that as having any effect on this at all. I was wondering if anyone has run into any similar problems, or if anyone might have any advice on this issue? I would really like to be able to solve this, as I was hired to do mainly structural design for the P.O.P. and I'm having to put in a lot of overtime to get my work done along with the additional work that I'm having to do.
Thanks for your time

I've got a few years experience calibrating large format printers. First, the Yellow sounds like a file problem. I used to work with two workstations, one PC ( RIP station ), and one Mac ( file prep station ). I tend to agree with you in that the OS is probably not the problem. But, any Colorburst profiles should remain in the RIP, not in the originator application. My workflow consisted of creating EPS files that were based on established color settings in their given applications ( i.e., Illustrator, Photoshop ) which were interpreted by the RIP which had it's own calibrated profile ( perhaps more than one based on how many different substrates were being used ). Your partner may be complicating things by incorporating a RIP profile prematurely. If there are deviations big enough to be noticed, there has to be something in the application color settings that is causing some type of corruption. This could lead back to the operating system, but I would think it lies somewhere in Bridge or the application color settings. Start there. You should seriously consider implementing a calibration system if you do not have one already. Another slight possibility is the driver's ability to interpret files coming out of Leopard vs. files coming out of Tiger. It may benefit you both to be in the same operating system dynamics, using the same driver versions and RIP profiles. At the very least, match everything that is currently working successfully and put them on both machines. If there is still a noticeable problem in color matching, then something is seriously wrong and you should call in a prepress profiling expert. Hope this helps.

Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

Is there a bug or problem with increased noise when exporting pictures out of Lightroom 4?

Is there a bug or problem with increased noise when exporting pictures out of Lightroom 4?

As you are asking about it, looks like you do see a problem. So if googling does not provide a solution, you should describe the issue in detail so we can try to help out.

Problem with a design when open in firefox like

problem with a design when open in firefox like http://3a6aayer.com/Default.aspx

What kind of problems do you have?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.

I have a problem with Apple store when installing large application: The system crashes. Any suggestion?

I have a problem with Apple store when installing large application (example xCode): The system crashes.
It begun with 10.8 usualy with few tries it work but with 4.6 no succes.
Any suggestion?

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

I have problem with my mic when i make call the others cannot hear me but the mic is ok

i have problem with my mic when i make call the others cannot hear me but the mic is ok i checked it out and it works dont know what to do help me !!

Hello Sabbir Khan,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Can't hear through the receiver or through speaker, and can't be heard
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Best of luck,
Mario

Problems with url-bindings when redeploying on Oracle 9iAS

Similar Messages

Maybe you are looking for