Product category exists more than once

Hi,
We are using SRM 7.0/ECC 6.0 (Ext classic)
Our SRM was earlier connected to ECC100 and was working perfectly. Now it is connected to ECC200 and working.
But area of concern is while creating limit SC, when I select a product category, the system displays a message "Product category exists more than once. Use input help". I have deleted all product categories of old ECC system from COMM_HIERARCHY too. This does not occur when I create a normal SC.
Anyone can please advise?
Thanks

hi,
Check the Material Group in ECC 6.0
Check in SRM in the Extended attribute tab whether the backend logical system and the product category are correct
In creation of shopping cart for the user it is picking from here
G.Ganesh Kumar

Similar Messages

Performance... Why a function column in a view is executed more than once...?

Why a function column created inside a view is executed more than once when called more than once?
EXAMPLE:
create or replace view aux1 as
date_column,
any_function(date_column) column1
from any_table
create or replace view aux2 as
column1 c1,
column1 c2,
column1 c3
from aux1
select * from aux2
It will execute 3 times the function any_function... logically the value will be the same for all columns...
I understand why!... are 3 calls... but...
Why not to create a "small" verification and if the function column was execute replace the second, the third... value? ... instead of execute 3, 4... times...
tks
Braga

Actually, this is more than a performance issue. This is a consistency problem. If the function is NOT deterministic then you may get different values for each call which is clearly not consistent with selecting 3 copies of the same column from a row. Oracle appears to have fixed this in 9i...
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.2.0 - Production
With the Partitioning option
JServer Release 8.1.7.2.0 - Production
create view v1 as select dbms_random.value(1,100) r from dual;
create view v2 as select r r1, r r2 from v1;
select * from v2;
          R1           R2
          93           74
Connected to:
Oracle9i Enterprise Edition Release 9.0.1.3.0 - Production
With the Partitioning option
JServer Release 9.0.1.3.0 - Production
create view v1 as select dbms_random.value(1,100) r from dual;
create view v2 as select r r1, r r2 from v1;
select * from v2;
          R1           R2
          78           78Richard

Button/click box click more than once

Hi, I'm hoping you guys can point out what I'm doing wrong...
I have an image where the user can click on certain parts of
it to display a callout. However, I want them to be able to click
on the area of the image more than once if requried. I suppose you
can say it's a bit like an image map.
First I used click boxes to achieve this, then I tried using
transparent buttons. However for both of these methods you can only
click on each part once during playback. Clicking again does not
show the callout.
I thought about copying the contents to another slide and add
a 'Reset' button the user could click on. This would move to the
other slide, but this seems a bit on the 'clunky' side, so I
thought there must be a setting or something really obvious that I
have missed. I was unable to find the relevant informaiton in the
help file or elsewhere in the forum, so if it does exist I would
appreciate someone pointing me in the right direction.
How can I allow the user to click on parts of the image more
than once to show the callout?
Thanks for your help,
Liz

Thanks for your reply Rick.
I started the activity using rollovers, but I wanted the user
to do something more definite than just hovering over each part of
the image. So essentially, I want the rollover functionality but
with the ability to click instead of just hovering the cursor over.
I thought this would be easy!
I've tried using both buttons and click boxes without any
success. I ventured a little into slidelets, but I want the callout
to appear in a very specific place and this did not appear to
satisfy my requirements. The 'click to stick' sounds intriguing so
I'll take a look into this, but I'm not convinced it's what I want.
Any more suggestions are most welcome.
Regards
Liz

Inbound interface was found more than once

Hi All,
Currently I'm working on a scenario wherein an invoice file is generated and created on FTP server, PI system picks up invoice (xml file) and sends to customer via EDI 810. The scenario failed in sxmb_moni and below is the error message.
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
<SAP:P1>Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xyz:sap:components. 810_Outbound_Async_MI</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when determining the inbound interface: Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xyz:sap:components. 810_Outbound_Async_MI Inbound interface was found more than once (for same sender and receiver) for outbound interface
Can anyone help me out and provide some valuable suggestions.
Regards
Faisal

Hi Abdul,
Try to run the scenario in the ID.
There is one test tool to in directory for this, login to ID --> go to Tools --> Test configuration.
This will show you the error in the exact step.
-Supriya.

Getting the same text more than once

I keep getting the same numerous texts more than once from my friends and one of my friends even said that they were getting my texts out of order. Is it my phone or the network?

It's easy to burn another copy of a DVD if you have already burnt a copy of it before. Just click the "Format" icon in the toolbar. It will pop up with a window with some options. You shouldn't have to change any of these options, just make sure that the Output Device is set to your DVD drive, which it should be set to by default. Just click the "Burn" button, pop in a DVD, and you're good to go.
If you've made a few changes to the DVD, you can use the "Build/Format" button in the toolbar. It will pop up with a window similar to that of the Format window. Click "Build & Burn." It will tell you that a VIDEO_TS directory already exists, and it can reuse as much of it as possible. You can then click "Reuse" to build the new portions of the DVD, and then it will burn it on a DVD.
Hope this helps.

Custom Administrative Template Error 53 Key name specified more than once

Hi All,
Hope I've picked the correct forum. I am making my first foray into setting up a custom administrative template for some software that is developed in house. The current deployment method is to merge a reg file on each computer that requires the registry
settings. I am trying to set this up so that it is controlled via GPO.
My idea is that in the a GP can set the registry settings for one or more areas that are controlled by the software.
The problem I have - I get Error 53 Keyname specified more than once on Line 9 (second KEYNAME). In total I will have about 30 different sites this needs to be set up for.
Does this mean that I can't set more than one registry key per "Policy" setting in the GPO?
The adm file I have so far is below
TIA
Jason
---------------------------------------------CUT---------------------------------------------
CLASS User
CATEGORY "App Site Settings"
POLICY !!Site1Policy
EXPLAIN !!Site1Explain
KEYNAME "Software\ApplicationCompany\Site1\Access"
VALUENAME "SystemDatabase"
VALUEON "D:\\App\\Data\\App.mdw"
VALUEOFF DELETE
KEYNAME "Software\ApplicationCompany\Site1\Arbitration"
VALUENAME "ConfigPath"
VALUEON "D:\\Site1\\Data"
VALUEOFF DELETE
KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
VALUENAME "ConfigFile"
VALUEON "D:\\App\\Data\\App_Comms.mdb"
VALUEOFF DELETE
VALUENAME "SysConfig"
VALUEON "D:\\Site1\\Data\\SITE1_SYS.mdb"
VALUEOFF DELETE
END POLICY
POLICY !!Site2Policy
EXPLAIN !!Site2Explain
KEYNAME "Software\ApplicationCompany\Site2\Access"
VALUENAME "SystemDatabase"
VALUE "D:\\App\\Data\\App.mdw"
KEYNAME "Software\ApplicationCompany\Site2\Arbitration"
VALUENAME "ConfigPath"
VALUE "D:\\Site2\\Data"
KEYNAME "Software\ApplicationCompany\Site2\Common Settings"
VALUENAME "ConfigFile"
VALUE "D:\\App\\Data\\App_Comms.mdb"
VALUENAME "SysConfig"
VALUE "D:\\Site2\\Data\\Site2_SYS.mdb"
END POLICY
END CATEGORY
[strings]
Site1Policy = "Site1 settings"
Site1Explain = "Enabling this setting configures the registry settings for dummy Site1."
Site2Policy = "Site2 settings"
Site2Explain = "Enabling this setting configures the registry settings for dummy Site2."

Well - I ended up sorting this out - and no - you can't have the Keyname keyword twice - unless you enclose the the setting in a PART statement. Below is what I ended up with:
---------------------------------------------CUT---------------------------------------------
CLASS USER
CATEGORY "ApplicationSettings"
KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
POLICY !!SITE1Policy
#if version >= 3
EXPLAIN !!PolicyExplain
#endif
KEYNAME "Software\ApplicationCompany\Site1\Access"
PART !!ConfigFilePolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
VALUENAME ConfigFile
DEFAULT !!ConfigFileDefault
END PART ;!!ConfigFilePolicy
PART !!SystemDBPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Access"
VALUENAME SystemDatabase
DEFAULT !!SystemDBDefault
END PART ;!!SystemDBPolicy
PART !!SysConfigPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Common Setting"
VALUENAME SysConfig
DEFAULT !!SysConfigDefault
END PART ;!!SysConfigPolicy
PART !!ArbitrationPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Arbitration"
VALUENAME ConfigPath
DEFAULT !!ArbitrationDefault
END PART ;!!ArbitrationPolicy
END POLICY
POLICY !!SITE2Policy
#if version >= 3
EXPLAIN !!PolicyExplain
#endif
KEYNAME "Software\ApplicationCompany\Site2\Access"
PART !!ConfigFilePolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Common Settings"
VALUENAME ConfigFile
DEFAULT !!ConfigFileDefault
END PART ;!!ConfigFilePolicy
PART !!SystemDBPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Access"
VALUENAME SystemDatabase
DEFAULT !!SystemDBDefault
END PART ;!!SystemDBPolicy
PART !!SysConfigPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Common Setting"
VALUENAME SysConfig
DEFAULT !!SysConfigDefault
END PART ;!!SysConfigPolicy
PART !!ArbitrationPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Arbitration"
VALUENAME ConfigPath
DEFAULT !!ArbitrationDefault
END PART ;!!ArbitrationPolicy
END POLICY
END CATEGORY
[Strings]
ArbitrationDefault =D:\SITE\Data
ArbitrationPolicy =Arbitration path
ConfigFileDefault =D:\App\Data\App_Comms.mdb
ConfigFilePolicy =Application configuration file
PolicyExplain =Enter Explainition of the Registry settings here
SysConfigDefault =D:\SITE\Data\SITE1_SYS.mdb
SysConfigPolicy =Application site system configuration file
SystemDBDefault =D:\App\Data\App.mdw
SystemDBPolicy =Application system database path
SITE1Policy =Site1 Application Settings
SITE2Policy =Site2 Application Settings

Using firefox 5 - when ever I try to use the same key more than once in a row, it does not work. Hitting the multiple times does nothing at all. How can this be corrected. HELP!!!

everything that needs to be done on the keyboard is effected - letters, numbers, backspace, directionals, delete, home, end, page up, page down, '''all keys that are pressed more than once''' It does not matter what webpage I am on.
PLEASE HELP
this is very frustrating

You may have switched on an accessibility feature called FilterKeys by keeping the Shift key pressed for too long.
* http://www.microsoft.com/enable/products/windowsxp/default.aspx
*http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/access_filterkeys_turnon.mspx?mfr=true

Bug! Hot-deploying the same bean more than once results in a DeploymentException!

Hi all,
Anyone else having this problem? When re-deploying an EJB within a
running WL server 4.5.1 w/ sp9 more than once results in the following
DeploymentException. The first time we re-deploy it works fine, but any
re-deployments after that fail.
This is potentially fatal in that if we have to make more than one
change to a bean over time and re-deploy those changes, we have to cycle
the server, which is NOT acceptable for a production environment!
Any clues or workarounds would be greatly appreciated.....Thanks!
BP
[xxxx.xxxx.com] < /pkg/bea > java -classpath
/pkg/bea/classes:/pkg/bea/lib/weblogicaux.jar weblogic.deploy -redeploy
xxxxxxx file:/pkg/bea/classes/OurSessionBean.jar
weblogic.ejb.common.DeploymentException: Unable to create bean
classloader:
weblogic.ejb.common.DeploymentException: loading EJB JAR
/local/pkg/bea/depot/weblogic-4.51/classes/OurSessionBean.jar; nested
exception is:
java.io.EOFException
java.io.EOFException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.io.IOException.<init>(IOException.java:35)
at java.io.EOFException.<init>(EOFException.java:43)
at java.io.DataInputStream.readUnsignedShort(Compiled Code)
at
weblogic.utils.classfile.LineNumberTable_attribute$line_num_struct.read(Compiled
Code)
at
weblogic.utils.classfile.LineNumberTable_attribute.read(Compiled Code)
at weblogic.utils.classfile.AttributeTable.read(Compiled Code)
at weblogic.utils.classfile.Code_attribute.read(Compiled Code)
at weblogic.utils.classfile.AttributeTable.read(Compiled Code)
at weblogic.utils.classfile.ClassMember.read(Compiled Code)
at weblogic.utils.classfile.MethodTable.read(Compiled Code)
at weblogic.utils.classfile.ClassFile.read(Compiled Code)
at weblogic.utils.classfile.ClassFile.<init>(Compiled Code)
at weblogic.ejb.internal.EJBJarLoader.computeExclude(Compiled
Code)
at weblogic.ejb.internal.EJBJarLoader.initialize(Compiled Code)
at weblogic.ejb.internal.EJBJarLoader.<init>(Compiled Code)
at weblogic.ejb.internal.EJBJarLoader.<init>(Compiled Code)
at weblogic.ejb.internal.EJBJarDeployment.setup(Compiled Code)
at weblogic.ejb.internal.EJBJarDeployment.redeploy(Compiled
Code)
at
weblogic.ejb.internal.EJBJarDeployment.redeploy(EJBJarDeployment.java:629)
at
weblogic.ejb.internal.EJBManagerImpl.redeploy(EJBManagerImpl.java:266)
at
weblogic.ejb.common.EJBManager_WLSkel.invoke(EJBManager_WLSkel.java:169)
at
weblogic.rmi.extensions.BasicServerObjectAdapter.invoke(Compiled Code)
at
weblogic.rmi.extensions.BasicRequestHandler.handleRequest(Compiled Code)
at
weblogic.rmi.extensions.BasicRequestDispatcher$BasicExecuteRequest.execute(Compiled
Code)
at weblogic.t3.srvr.ExecuteThread.run(Compiled Code)
at java.lang.Throwable.fillInStackTrace(Native Method)
at
weblogic.rmi.extensions.BasicRequest.sendReceive(BasicRequest.java:44)
at
weblogic.ejb.common.EJBManager_WLStub.redeploy(EJBManager_WLStub.java:312)
at weblogic.deploy.deploy(deploy.java:129)
at weblogic.deploy.runBody(deploy.java:79)
at weblogic.utils.compiler.Tool.run(Tool.java:55)
at weblogic.deploy.main(deploy.java:140)

how about undeploy an already deployed bean first and then trying to redeploy.
becoz i know there's an option like that with DDDeploy. I am talking of 5.1 but the
logic should probably work in 4.5 too.
Try doing it and see what happens.
-Vikas
Blah Blah wrote:
Hi all,
Anyone else having this problem? When re-deploying an EJB within a
running WL server 4.5.1 w/ sp9 more than once results in the following
DeploymentException. The first time we re-deploy it works fine, but any
re-deployments after that fail.
This is potentially fatal in that if we have to make more than one
change to a bean over time and re-deploy those changes, we have to cycle
the server, which is NOT acceptable for a production environment!
Any clues or workarounds would be greatly appreciated.....Thanks!
BP
[xxxx.xxxx.com] < /pkg/bea > java -classpath
/pkg/bea/classes:/pkg/bea/lib/weblogicaux.jar weblogic.deploy -redeploy
xxxxxxx file:/pkg/bea/classes/OurSessionBean.jar
weblogic.ejb.common.DeploymentException: Unable to create bean
classloader:
weblogic.ejb.common.DeploymentException: loading EJB JAR
/local/pkg/bea/depot/weblogic-4.51/classes/OurSessionBean.jar; nested
exception is:
java.io.EOFException
java.io.EOFException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.io.IOException.<init>(IOException.java:35)
at java.io.EOFException.<init>(EOFException.java:43)
at java.io.DataInputStream.readUnsignedShort(Compiled Code)
at
weblogic.utils.classfile.LineNumberTable_attribute$line_num_struct.read(Compiled
Code)
at
weblogic.utils.classfile.LineNumberTable_attribute.read(Compiled Code)
at weblogic.utils.classfile.AttributeTable.read(Compiled Code)
at weblogic.utils.classfile.Code_attribute.read(Compiled Code)
at weblogic.utils.classfile.AttributeTable.read(Compiled Code)
at weblogic.utils.classfile.ClassMember.read(Compiled Code)
at weblogic.utils.classfile.MethodTable.read(Compiled Code)
at weblogic.utils.classfile.ClassFile.read(Compiled Code)
at weblogic.utils.classfile.ClassFile.<init>(Compiled Code)
at weblogic.ejb.internal.EJBJarLoader.computeExclude(Compiled
Code)
at weblogic.ejb.internal.EJBJarLoader.initialize(Compiled Code)
at weblogic.ejb.internal.EJBJarLoader.<init>(Compiled Code)
at weblogic.ejb.internal.EJBJarLoader.<init>(Compiled Code)
at weblogic.ejb.internal.EJBJarDeployment.setup(Compiled Code)
at weblogic.ejb.internal.EJBJarDeployment.redeploy(Compiled
Code)
at
weblogic.ejb.internal.EJBJarDeployment.redeploy(EJBJarDeployment.java:629)
at
weblogic.ejb.internal.EJBManagerImpl.redeploy(EJBManagerImpl.java:266)
at
weblogic.ejb.common.EJBManager_WLSkel.invoke(EJBManager_WLSkel.java:169)
at
weblogic.rmi.extensions.BasicServerObjectAdapter.invoke(Compiled Code)
at
weblogic.rmi.extensions.BasicRequestHandler.handleRequest(Compiled Code)
at
weblogic.rmi.extensions.BasicRequestDispatcher$BasicExecuteRequest.execute(Compiled
Code)
at weblogic.t3.srvr.ExecuteThread.run(Compiled Code)
at java.lang.Throwable.fillInStackTrace(Native Method)
at
weblogic.rmi.extensions.BasicRequest.sendReceive(BasicRequest.java:44)
at
weblogic.ejb.common.EJBManager_WLStub.redeploy(EJBManager_WLStub.java:312)
at weblogic.deploy.deploy(deploy.java:129)
at weblogic.deploy.runBody(deploy.java:79)
at weblogic.utils.compiler.Tool.run(Tool.java:55)
at weblogic.deploy.main(deploy.java:140)

Powershell and Client Object Model - no error thrown if user is added more than once to same site or group

Hello All -
I am trying to add a user to a SharePoint site using PowerShell like below:-
New-SPUser -UserAlias MyDomain\jan20a -Web http://SPServer/sites/MySite
If I execute the above more than once, SharePoint does not throw that user already exists or something. This is not the same behavior in AD/Exchange PowerShell cmdlets.
Also, even the client object model behaves the same way.
Another interesting thing I noticed, I tried to remove a user from group in which the user was not part of it at all and still no error..!!
Looks like SharePoint does not care of invalid input and just ignores it.
Can anyone please confirm this and also the reason behind it ?

It's not really invalid input, since the user exists and that is how SharePoint behaves (will behave same way in browser). Try to input a user that and misspell the name, e.g. say you didn't have a MyDomain\Jan21a, then try to use same script above,
only with invalid data. It will bark at you. Or try using a web that it cannot find, one that does not exist. You'll get what I like to call, the red badge of courage if you enter invalid data.
you can test that sharepoint will let you enter a user twice in the browser, and nothing bad comes from it. Powershell is just unable to tell that the user was not in the site, when you removed it the second time.
Hope that confirms it, if it does please mark this reply accordingly. thanks
Stacy Simpkins | MCSE SharePoint | www.sharepointpapa.com

Duplicate entries / Employee is appearing twice in report (OR more than onc

Duplicate entries / Employee is appearing twice in report (OR more than once)
When I hire an employee, I assign the position, and based on the positions other values get defaulted /assigned to that employee.
I have one case where employee has been assigned to one position, but with different position descriptions, and in report it is showing duplicate entries for the same personnel number, now client need for one personnel number only one row to display in report
Also I tries to run , Birthday list standard report , it is also showing 2 entries (Or sometime more than 2)for the same personnel number , May I know why this is happening?
And how to fix this bug
Thanks and Regards
Jaydeep Jadhav

Hi,
Can you check where the code is written to get employees from position, there may be two cases where multiple records exists for single person.
1) When getting data for pernr assigning to a position they may missed out date condition. If so we need to bring only active positions assigned to that employee.
2) There may be multiple positions assigned to a single person. In this case you need to ask the client what you need to do.
Delete adjacent duplicate is may not be correct solution as which position we need to delete is not sure. You check above two cases and go head.
Hope this information will help you.
Regards,
Narendra.Soma

Statechart module: Using a master statechart to launch a slave statechart more than once without getting Error 1100 at Obtain Queue (No object of that name was found)

Hello,
I am trying to create a project using the statechart module, and one of the techniques I am trying to use is a "master-slave" statechart structure, illustrated by the code I have attached to this post (you probably need the statechart module installed to look at my example code). The problem I have recently discovered is that the slave statecharts cannot be launched more than once without raising an Error 1100 at Obtain Queue. I have gathered from a few other posts that the cause of this error is the fact that the First Call primitive is used by the Statechart module to initialize the statechart when it is first run. This works fine for the first launch of the slave statechart, but the second launch and subsequent launches of the statechart fail on Error 1100, since the First Call primitive won't let the statechart initialize (the First Call primitive tells the statechart it has already been initialized (this isn't the first call), and the External Trigger function then tries to send an external trigger to a queue that doesn't exist).
What I can't gather from those posts is the correction I need to make to get this design to work. I tried to send the slave statecharts a boolean flag for the "Init?" terminal, to force a reinitializing of the slave statechart. I couldn't get that to work. I tried to not load the slave sub VI as a slave sub VI, and launch it using some VI Server code, so that maybe the slave sub VI would be loaded and unloaded, therefore causing the statechart to properly initialize, but I couldn't get that to work either. What correction should I make? How do I get this to work?
I really want to use this design pattern, first of all since I wrote a lot of code already with this structure, and second of all, it makes a lot of sense to me. How do I make it work? If someone could post a version of my code that functions the same, but without the error, I would appreciate that. If you don't have time for that, but would be able to outline the steps I need to take to get it to work, that would be helpful, as well.
Thanks to anyone for any assistance they can provide. If you need any other information, please let me know.
Attachments:
Statechart Sample.zip ‏431 KB

Thanks, Deborah. I tried this approach out, and it turns out you can't just wire a TRUE to the "Init?" terminal. You have to wire a TRUE for the first run of the slave statechart, and then it has to become a FALSE. If you wire a TRUE, it will constantly try to reset the statechart, which doesn't work.
The master statechart has to keep track of whether it has called the slave statechart, and communicate that to the slave statechart. On the very first call of the slave statechart, the "First Call?" function inside of the "Run Statechart" function will give a TRUE, which initializes the statechart properly, and then gives a FALSE from that point after. After that, the "First Call?" function doesn't work anymore (it will always return FALSE), and an initial TRUE, with subsequent FALSE values, has to be provided manually.
I attached a version that does this, which appears to work. Let me know if it doesn't work for someone, or if you have a better idea to implement the correction.
Thanks to everyone for the replies!
Attachments:
Master-Slave Statechart Sample.zip ‏439 KB

Importing an email more than once from notes into the webclient...Possible?

Hi!
Is it possible to import an email more than once from a lotus notes account into my webclient?
I don't have a working sample so:
Is there a lock to prevent it... in notes... in my webclient?
Are there optical signs in my webclient that an email is already imported?
Thanks in advance for your hints in this case.
Cheers, Ingo

The Member Feedback forum is for suggestions and feedback for OTN Developer Services. This forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions will not be answered. We recommend that you post this thread to the appropriate Database forum.
The main URL is:
http://forums.oracle.com/forums/index.jsp?cat=18

Archiving same data more than once due to overlapping variant values

Hi all,
i had accidently run 2 archiving jobs on the same data. For instance, job 1 was archiving for company code IN ( where the company code was from IN00 till ZZ00), which was the unwanted job. The second archive job archived data from IN99 till INZZ ( not the whole IN company code ).
These 2 jobs failed due to log fulll ( the data was too huge to be archived), however when i expand the jobs in the failed SARA session, the archive files has up to 100 MB size.
Below are some of the problems which will incur if we archive the same data more than once ( which i found from my online search )
- some archiving objects require that data only exists once in the archive therefore duplicate data can lead to erroneous results in the totals of archived data
- Archiving the data again will affect checksum. Checksum normally conducted before and after archiving process and its purpose is to validate whether the same file contents exist in the newly created archive files as compare the original data.
Could anyone advice me on how to overcome this multiple archiving on the same data issue. Apart from above stated impact, what are the other problems of multiple archiving on same data?
The failed archived sessions are currently in "Incomplete Archiving Session" and in 1 week time they will be deleted by archive delete jobs and will be moved to "Completed Archive Session". I highly appreciate if anyone could help
Source of finding:
http://help.sap.com/saphelp_nw73/helpdata/en/4d/8c7890910b154ee10000000a42189e/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/en/8d/3e4fc6462a11d189000000e8323d3a/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/8d/3e4fc6462a11d189000000e8323d3a/content.htm

Hello,
There are several issues here. In this case it seems pretty clear cut that you did not want the first variant to be executed. Hopefully none of the deletions have taken place for this archive run.
In cases where you have overlapping selection criteria and some of the deletions have been processed you can be in a very difficult situation. The best advise that I have would be to check your archive info structure CATALOG definition and make sure that both the archive file and the offset fields are set to DISPLAY fields and not KEY fields.
If your file and offset are key fields then when you use the archive info structure you would pull up more than one copy of the archived document.
Example: FI document 12345 was archived and deleted in archive run 1 and archive run 2.
The search for the archive info structure when the file and offset are keys fields would return two results.
12345 from run 1
12345 from run 2
If the CATALOG has the file and offset as display only fields you would only return one result
12345 from (whichever deletion file was processed first)
The second deletion process would have a warning message in the job log that not all records were inserted.
Please note that any direct access of the data archive file that bypasses the archive info structure and goes directly to the data archiving files would still show two documents and not a single document.
Regards,
Kirby Arnold

'PortfolioBacklogs' cannot appear more than once if content model type is "all"

I'm trying to add another level above feature and have followed these instructions https://msdn.microsoft.com/en-us/library/dn217880.aspx
The project is setup as scrum not agile, maybe that is why???, but I get the following error:
'PortfolioBacklogs' cannot appear more than once if content model type is "all"
and haven't been able to find where to change the content model type.

Hi Dckennedy1,
Thanks for your post.
What’s the version of your TFS? TFS 2013 Update 4? Your current team project created using default Scrum 2013.4 process template?  After which step you received this error? You can share your error screenshot(s) here.
I created a new Scrum 2013.4 template team project in my TFS 2013 Update 4 Server, and followed the steps in that document to add Initiatives work item type in my TFS Web Access, the Initiatives work item type be added into portfolios successfully, you can
refer to the below screenshot:
The only difference with steps in that document is I edited the PortfolioBacklogs section as below in my ProcessConfiguration.xml file.
   <PortfolioBacklog category="MyCompany.InitiativeCategory" pluralName="Initiatives" singularName="Initiative">
      <States>
        <State value="New" type="Proposed" />
        <State value="In Progress" type="InProgress" />
        <State value="Removed" type="InProgress" />
        <State value="Done" type="Complete" />
      </States>
      <Columns>
        <Column refname="System.WorkItemType" width="100" />
        <Column refname="System.Title" width="400" />
        <Column refname="System.State" width="100" />
        <Column refname="Microsoft.VSTS.Common.BusinessValue" width="50" />
        <Column refname="Microsoft.VSTS.Scheduling.TargetDate" width="100" />
        <Column refname="System.Tags" width="200" />
     </Columns>
      <AddPanel>
        <Fields>
          <Field refname="System.Title" />
        </Fields>
      </AddPanel>
    </PortfolioBacklog>
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Since I updated to iCloud, Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 has no problems. What's wrong?

Since I updated to iCloud, (which may or may not be related) Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 and my old iMac has no problems. When there is no service a yellow warning triangle appears adjacent to the Inbox and Connection Doctor reports,"Trying to log into this MobileMe IMAP account failed. Verify that username and password are correct." Since it does fetch Mail from time to time they cannot be wrong.... can they? Should I update to 10.7 and if so what does that entail?

You have been using MobileMe's email settings, which sometimes continue to work for a time after migration but then get turned off. iCloud's mail server settings are different. Strictly speaking Lion 10.7.2 is required for iCloud, and on that Mail is set up automatically.
Snow Leopard cannot access most of iCloud's facilities, however you can set Mail up manually to access your email. The method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
The situation with iCloud and Snow Leopard is described in detail here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html

Product category exists more than once

Similar Messages

Maybe you are looking for