Profile "BOM:Configurator URL of UI Manager" after SSL

Hi All,
We made our EBS as SSL enable. After SSL we are not able to book Sales order giving error "Configuration validation resulted in error(s)"
According to me some profile is not set correct that's why its giving error. If anyone has SSL enable instance please let me what will be the value of these two:
1)
profile : "BOM:Configurator URL of UI Manager"
2)
select value from cz_db_settings where setting_id='AltBatchValidateURL';
Now we have,
SQL> select value from cz_db_settings where setting_id='AltBatchValidateURL';
VALUE
https://hostname:4443/configurator/oracle.apps.cz.servlet.UiServlet,'file:wallet_directory','password'
Note : we have imported the certificate by wallet manager.
Thanks in advance..
Shekhar..
Edited by: LetMeKnow on May 14, 2010 3:29 AM

Hi,
https://hostname:4443/configurator/oracle.apps.cz.servlet.UiServlet,'file:wallet_directory','password'
Change the value to http and see if it helps -- See (Note: 565882.1 - Configuration Validation Resulted In Errors).
Thanks,
Hussein

Similar Messages

  • The URL in Solution Manager for SRM Standard Configuration

    Hi Experts,
    We all know that after SRM 5.0, all standard configuration guid are presented as URL in SAP Solution Manager like below:
    http://help.sap.com/SCENARIOS_BUS2005/helpdata/EN/ac/136341acd3001de10000000a155106/frameset.htm
    My question is: is there any other way to find these configuration url? If I don't have solution manager enviroment, how can I find these urls? Many thanks.

    Hi Dinesh,
    Thank you for your reply.  I checked this site before(maybe one year ago). At that time, there was no configuration guide for 5.0. Now it's great...
    My question is there any place contained those urls in solution manager. I can't find those urls in any configuration guide. SAP make such a configuration online help, why it doesn't open for those peopel who don't use solution manager. It confused me...
    Anyway, thank you very much for your reply.

  • Sql Server 2014 showing no services in the configuration manager after install?

    I'm using Windows 8. Recently I downloaded sql server management studio 2014 from the official website. But when I open the Sql server 2014 Configuration Manager there are
    no services listed.
    During installation, there were no any errors.
    See pic from here -> http://stackoverflow.com/questions/26159248/sql-server-2014-showing-no-services-in-the-configuration-manager-after-install?noredirect=1#comment41009151_26159248
    I did search everywhere but still I didn't find anything, please help me resolve this issue. I downloaded Sql server management studio 2014 from here-> http://msdn.microsoft.com/en-in/evalcenter/dn434042.aspx
    Inside `win+r` as i type `services.msc` I'm unable to see any sql or service into it.

    I downloaded sql server management studio 2014 from the official website. But when I open the Sql server 2014 Configuration Manager there are
    no services listed.
    Of course not, SSMS = SQL Server Management Studio is just a tool/frontend, not a Service. You have to install SQL Server database engine.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Single Sign On is not working when deploying a Wi-Fi profile from Configuration Manager 2012 R2

    Hello,
    Trying to deploy a wireless profile to a user collection everything works except for the single sign on.
    The user will get the wireless profile and be able to connect successfully but when the user signs on again to the same device the Wi-Fi will not connect before the logon process starts. 
    So GPO processing and home drive mappings are not occurring. The Wi-Fi profile is configured for "Single Sign On - Perform immediately before user logon" 
    These same settings can be managed successfully by GPO.  It would be really nice to be able to use ConfigMgr though!
    Thank you.

    Hi,
    Please refer to the links below:
    Single Sign-On Profile Sample
    http://msdn.microsoft.com/en-us/library/windows/desktop/aa369849(v=vs.85).aspx
    Wireless Single Sign-On
    http://technet.microsoft.com/en-us/magazine/2007.11.cableguy.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I don't Configuring Access Manager in SSL Mode

    i only install am7.1 and ws7.0 in windows2003 pack 1.
    then, i read "Sun Java SystemAccess Manager 7.1 Postinstallation Guide" .
    it said that "Login to theWeb Server console.The default port is 8888." but i can't find the default port .
    i think my web server console's default port is 8989.

    Hi,
    As a part of my requirement, I need to Configure Access Manager in SSL Mode. For that, I followed all the steps(Change http to https in web server instance in Access Manager, Install Certificate, Modify AMConfig.properties) mentioned in the PostInstallation Guide of Sun Access Manager to configure the SSL using Selfsigned certificate. so, after doing all these steps, as soon as the hit the Access Manager URL httsp://machinename:portno/amserver/UI/Login, it shows "page cannot be displayed" error. I have checked the web server with SSL enabled in it and its running fine.
    On one of forum post, I read that you need to set this property to true "com.sun.am.jssproxy.trustAllServerCerts" if you are not installing the ROOTCA certificate however this is not listed in the AM documentation.
    Any help on this would be highly appreciated. Let me know if am missing any steps.

  • Can't connect to the Hyper-V manager after upgrading to Windows Hyper-V 2012 R2

    I have some Hyper-V server based on the free version (Windows Hyper-V 2012). I want to upgrade to the new version (Windows Hyper-V 2012 R2). So I begin to test it with
    an already working server (aka I was able to totally manager the server remotely without problem) and so upgrade it to the R2.
    After the upgrade, remote management and Hyper-V manager does not work anymore. So I redo my usual configuration steps (enable remote management, open firewall, uses
    latest hvremote.wsf, etc.). I was able to regain access to Computer Manager but not the Hyper-V manager which still can't connect at all. I can't access the Task Scheduler too without having a lot of XML error like "The task XML contains a value which
    is incorrectly formatted or out of range" (see below for screenshot).
    Is there a new step to do to be able to manage Hyper-V 2012 R2 from a Windows 7 computer?
    It's not a network problem as I can access RDP and MMC Computer Manager.
    To be sure the problem is coming from the R2, I have taken an old computer, install Windows Hyper-V 2012, do my usual configuration step, and
    tada: it works perfectly. I can access the Hyper-V manager from my client.
    Technical details:
    - Client is a Windows 7 SP1 x64 English member of a domain with latest RSAT (Windows6.1-KB958830-x64-RefreshPkg.msu).
    - Servers are in a workgroup (not a domain's member). And no, I can't add them to the same domain as the client.

    HI,
    Can we upgrade HyperV 2012 to hyper v 2012 R2.
    Thanks
    Atul

  • Agent disappeared automatically and it appeared in pending management after 6 months.

    We had a server (Windows server 2003 64 bit) which was installed and was working fine. Suddenly it disappeared automatically and it appeared in pending management after 6 months. We noticed it only when it came to pending management that the server disappeared
    from Agents managed TAB. When we checked the server and found that SCOM was uninstalled or disappeared or what ever. We re installed SCOM now and now from past 1 week we see that the agent is fine.
    We are using SCOM 2007R2 CU4 in our environment.
    I want to know the reason for this. Post installation of SCOM after this incident we checked the event logs and found the data for the last working of SCOM in that server and found the below events. I was not able to get that much old data in the SCOM Management
    server. But got the data from the Agent.
    Screen shot:
    ===========================
    Event id: 21033
    103
    101
    21403
    21402
    5399
    1000
    45
    Below are the contents of the event log
    21033:
    ========
    The Management Group CINSCOM was removed from the Microsoft Operations Manager Agent.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    =======================================================================
    Event id: 103
    ==========
    HealthService (2912) Health Service Store: The database engine stopped the instance (0).
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    ======================================================================
    Event id:101
    =========
    HealthService (2912) The database engine stopped.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    ==========================================================================
    Event id :21403
    ============
    The process started at 12:22:31 PM was terminated because the HealthService requested the workflow to stop, some data may have been lost.
    Command executed: "C:\WINDOWS\system32\cscript.exe" //nologo "C:\Program Files\System Center Operations Manager 2007\Health Service State\Monitoring Host Temporary Files 112\4723\AD_Replication_Partner_Op_Master_Consistency.vbs"
    cinmlgc25.e2k.ad.ge.com false
    Working Directory: C:\Program Files\System Center Operations Manager 2007\Health Service State\Monitoring Host Temporary Files 112\4723\ 
    One or more workflows were affected by this.  
    Workflow name: AD_Replication_Partner_Op_Master_Consistency.Monitor 
    Instance name: CINMLGC25 
    Instance ID: {E49A1DCD-88C3-5615-102B-E8321298AEFF} 
    Management group: CINSCOM
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    ================================================================================
    Event id:21402
    =============
    Forced to terminate the following process started at 12:22:31 PM because it ran past the configured timeout 120 seconds.
    Command executed: "C:\WINDOWS\system32\cscript.exe" //nologo "C:\Program Files\System Center Operations Manager 2007\Health Service State\Monitoring Host Temporary Files 112\4723\AD_Replication_Partner_Op_Master_Consistency.vbs"
    cinmlgc25.e2k.ad.ge.com false
    Working Directory: C:\Program Files\System Center Operations Manager 2007\Health Service State\Monitoring Host Temporary Files 112\4723\ 
    One or more workflows were affected by this.  
    Workflow name: AD_Replication_Partner_Op_Master_Consistency.Monitor 
    Instance name: CINMLGC25 
    Instance ID: {E49A1DCD-88C3-5615-102B-E8321298AEFF} 
    Management group: CINSCOM
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    =================================================================================
    Event id 5399
    ==========
    A rule has generated 50 alerts in the last 60 seconds.  Usually, when a rule generates this many alerts, it is because the rule definition is misconfigured.  Please examine the rule for errors. In order to avoid excessive load, this rule will be
    temporarily suspended until 2013-10-21T12:32:11.0039243-04:00. 
    Rule: Unexpected_SAM_Failure_5_Rule 
    Instance: CINMLGC25 
    Instance ID: {E49A1DCD-88C3-5615-102B-E8321298AEFF} 
    Management Group: CINSCOM
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    ===================================================================================
    Eventid: 1000
    ==============
    AD Replication Partner Op Master Consistency : The script 'AD Replication Partner Op Master Consistency' failed to executethe following LDAP query: '<LDAP://loumlgc02.e2k.ad.ge.com/DC=e2k,DC=ad,DC=ge,DC=com>;(&(objectClass=infrastructureUpdate)(fSMORoleOwner=*));fSMORoleOwner;Subtree'.
    The error returned was 'Table does not exist.' (0x80040E37)
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    ======================================================================================
    Event id:45
    ============
    AD Replication Partner Op Master Consistency : Unable to determine infrastructure Op Master on domain controller 'loumlgc02'.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    =======================================================================================
    Can any one please help...

    Hi,
    Based on my understanding, that you re-installed your SCOM, and now everything works fine. You want to know that why your SCOM run into problem 6 months before, right?
    According to the event logs in your agent, we could not tell what happened to your Operation manager. What I can see is that the management group was removed from the agent then. And there are some errors when moniored by the former management group.
    I would like to suggest you check out what actions have you do on your former management group 6 months before. Maybe we can check the operation manager logs on your management server.
    Regards,
    Yan Li
    Regards, Yan Li

  • T61p - Please wait while Windows configures Client Security Password - Manager

    My T61p system is fully updated, however I continue to get "Please with while windows configures Client Security Password - Manager." and then the computer trys to install
    css_manager_vista_tpm.exe
    over and over again.
    What is the problem here and how can I solve?
    How can I contact Lenovo-Thinkpad to assist?
    The problem has reoccured even after I did a system restore to an earlier date.
    It seems to initiate when I first boot up and then open up "Pictures"
    Please help.
    Thanks

    Well, I take everything back. After removing all password entries and re-installing/rebooting, it worked for a while. But now it is doing it all over again. I tried to call techincal support, but they then said I would have to pay for software support and they only support hardware, and to re-install the OS. Great, jeez, I couldn't have tried that myself, and that is so simple and takes no time at all (detecing sarcasm yet?)
    I do a lot of work for large corporations that are watching the IBM=>Lenovo takeover very closely to see if they are going to drop Thinkpads altogether and go with another laptop vendor. This type of weak support does not bode well. The person I was on the phone with was rude, hard to understand, and even told me there was no place to escalate the call to.
    There is no replacement for customer support. It is sad to see no Lenovo involvement in this forum, and don't make the mistake of thinking this is an isolated problem at this time. It is growing.
    Though Thinkpads are great Laptops, Toshiba used to have the market, but their support or should I say lack of it led to their downfall and position of leadership loss.
    It will be no different if Lenovo continues to act like a machine churner.

  • Document for configuration of the spend management in SAP E-Sourcing

    Hi All
    Is there any document for configuration of the spend management in SAP E-Sourcing 5.1
    I have checked the RG section of the application and also all the documentation delivered as a part of the ESO software download
    Unable to locate this, request you to redirect me to the link on the service marketplace from where I can download this, as far as I know, its not available there.
    Currently I get the following error mentioned below for every menu option clicked under the spend and Compliance Tab
    Error: The spend analysis environment is not ready to provide spend data
    Request feedback
    Regards
    Tridip

    Hi Kamalakar
    This is great piece of information, I checked the same place i found the following
    Module Name
    Auctions License       
    BOM License       
    Contracts License       
    Demand Aggregation License       
    Frictionless SRM Product License       
    Optimization License       
    Projects License       
    RFQuick License       
    RFx License       
    SRM Explorer License       
    XPress Print License
    Do you think am missing the spend license, whats that called, request you to let me know
    Regards
    Tridip
    Edited by: Tridip Chakraborthy on Apr 15, 2009 8:48 PM

  • Local client copy profile SAP_CUSV: Configuration not working

    Dear Experts,
    My configuration client is 350 and my new client is 100 in same DEV system. Client 100 is copied from client 000 with profile SAP_ALL. Then I created a local copy from 350 using profile SAP_CUSV into same client 100. After that I am facing issues under HCM module. All the HCM configuration that works well in 350 does not work in client 100 even the standard header configuration of PA30 does not work. All the customizing entries are however present in HCM configuration tables but system seems not to read anything from HCM configuration. Apart from screen headers, the configuration done by consultant also has conflicts and system shows an error to maintain entries in tables which are already maintained and visible in configuration tables in 100. An example of error in which system gives error of maintaining Payscale Type and Payscale Area in table T510 is attached where as the entries are maintained in given table.
    Best Regards,

    Hi,
    Please check the following notes.
    1946003 - Client copy completed with Dictionary error
    1171306 - Error with pooled tables when copying a client
    686357 - Table pool has incorrect length following Unicode conversion
    Please close the thread if this address your issues.
    Thanks 
    Adil

  • Mail configuration in SAP SOLUTION MANAGER 7.1

    Hi All,
    I am working on SMTP (Mail)Configuration in SAP Solution Manager 7.1. And our mail host is GOOGLE APPS.
    Does any one had configured mail in SAP for hosted on GOOGLE APPS? 
    Does SAP will support this as it is external (mail) server?
    I read note 455140, related notes and configured accordingly.
    Steps I followed:
    1. parameters maintained:
    icm/server_port_2 = PROT=SMTP,PORT=25000,TIMEOUT=180
    is/SMTP/virt_host_0 = *:25000;
    2. User maintained: Dialog user with S_A.SCON profile with user address as username@<companyname>.com
    3.Client Assignment: (SICF): a. Host Data:Profile Parameter Number: is/SMTP/virt_host_0
    b. Service data: Client 100, user: username, password: ***, language: EN.
    c. Handler List: CL_SMTP_EXT_SAPCONNECT in the first position
    Saved Changes n Activated.
    4.SAPconnect administration (SCOT):
    a. Default domain: <companyname>.com
    b. Nodes: SMTP Under node:
    Mail Host: smtp.gmail.com
    Mail Port: 25 and also tried 587
    In Internet Address Area: *
    5.Scheduled periodic Job with SAP&CONNECTALL variant
    6. telnet <HOSTNAME> 25000 is successful
    In both cases I am getting error as:
    No delivery to ishan.sangai@<companyname>.com, authentication required
    Message no. XS853
    Diagnosis
    The message was processed successfully in the SAP system. The mail server that is supposed to receive the message for further processing requires authentication. The SAP system does not support this procedure. As a result, the message was not delivered to recipient ishan.sangai@<companyname>.com.
    Information from External System
    _530 5.7.0 Must issue a STARTTLS command first. p1admin@<companyname>.com
    Procedure
    The administration settings must be changed. The specified mail server must not request authentication.
    7. I tried to telnet smtp.gmail.com 25 and 587 also
    I am getting following output:
    220 mx.google.com ESMTP ds5sm2193379ibb.5
    HELO <HOSTNAME>
    250 mx.google.com at your service
    HELO <companyname>.com
    250 mx.google.com at your service
    MAIL FROM solman_admin@<companyname>.com ENVID=12345
    530 5.7.0 Must issue a STARTTLS command first. ds5sm2193379ibb.5
    Does we need to talk with Google Apps provider for any modifications to be made for this.
    if yes, which changes should I request them?
    Please help me to solve this problem.
    Please provide links,guides.notes etc. for this scenario
    Thanks & Regards,
    Ishan

    Hi we are configuring Google SMTP getting below error..
    No delivery to xxx.com, authentication required
    Message no. XS856
    Diagnosis
    The message was processed successfully in the SAP system. The mail server that is to receive the message for further processing requires authentication. Probably there is no logon data specified in the SAPconnect configuration.
    Information from external system (if available)
    smtp.gmail.com:587
    530 5.7.0 Must issue a STARTTLS command first. i91sm11178241qgd.25 - gsmtp
    Procedure
    Enter the logon data in the SAPconnect node.
    Using Gmail SMTP server using "smtp.gmail.com" with port 587
    Please advise.
    Regards,
    Sudarshan

  • Difference between Web Service URL and Report Manager URL

    What is the difference between Web Service URL and Report Manager URL in Reporting Service configuration manager in SQl Server 2008 Reporting Setrvices

    Another way to put it is the Web Service URL is just that, its used for services that are connecting to issue API calls.  The Report Manager URL is the nice GUI that users should use.  If you click the links, you should see the difference.  I
    am sure you have likely done that, but functionally one is for programmatic purposes and the other to be the front end graphical user interface.
    Sometimes pictures help as well...
    http://bretstateham.com/reporting-services-architecture-diagram%E2%80%A6/

  • How to configure FM module in BW after ECC6.0

    Can someone advice me on how to configure FM Module in BW after ECC6
    My company just upgrade R/3 system from 4.6C to ECC6.0. Before this Fund Management(FM) reside under 0FI (Financial Accounting) after ECC6.0 the FM reside in 0PSM (Public Sector Management).
    In 4.6C,  there is only 2 extractor for FM but for ECC6.0 there are a lot of extractor listed such as.
    - FM_BW_BUDGET
    - FM_BW_ACTUAL
    ECC6.0
    - FM_BW_BUDGET_DELTA_ISPS       
    - FM_BW_BUDGET_ENTRY_DOCUMENTS  
    - FM_BW_BUDGET_ISPS             
    - FM_BW_BUDGET_LINE_ITEMS       
    - FM_BW_BUDGET_TOTALS           
    - FM_BW_ACTUAL_CO_LINE_ITEMS_IS 
    - FM_BW_ACTUAL_FI_LINE_ITEMS_IS 
    - FM_BW_ACTUAL_ISPS             
    - FM_BW_ACTUAL_OI_LINE_ITEMS_IS 
    I need to know how to configure this new FM in BW and the 0PSM are not in BW System.

    Is there a different in configuration between BI7 and BW 3.5?
    Before this in 4.6C the query for FM read from BW3.5 but since the R/3 has upgrade to ECC6 and our BW System also has upgrade to Netweaver 2004s, so we'll be using BI7

  • Sales order BOM configuration - CU51

    Hi,
    I am using with Variant configuration. I will be configuring the FERT into Sales Order for the characteristic.
    Then I tried for CU51 t code for BOM configuration (for adding or removing of materials for some special cases) in the sales order,
    But I am not able to do so, and I am getting an error as  -> Order BOM processing not possible - owner MARC not allowed
    In CHANGE CONFIGURATION PROFILE(CU42) for KMAT material I had given  -> Order BOM -> result oriented- in configuration parameters.
    Is there any settings is to be made
    Please your advices will be appreciated.
    Thank you.

    Thank you for replies,
    I checked it, in CU41order BOM was selected, it was configured the fert materials in MRP 3 VIEW, was also assigned the relation in CS40.
    Still in CU51, I am not able to enter into sales order BOM. The error was - Order BOM processing not possible - owner MARC not allowed.
    Here I am having 10 FG variants and 1 KMAT material, during sales order creation KMAT material will be repleced by FG variant by variant matching.
    With respect to SD module TAN - item category was selected.
    What about TAC, is there any diiference.
    Or is it any settings I have to maintain.
    Regards,
    B C Gudageri

  • How to restrict profile manager to SSL?

    I have just setup Profile Manager 3.0.2 on OS X 10.9.1 (Mavericks). The setup works fine, but I noticed that I can access profile manager over SSL and regular HTTP. I would like to restrict access to using SSL, but I don't know. Can someone please direct me to how I restrict access to profile manager to only allowing secure connection. Please be clear as I am new to OS X. Thanks.

    Authentication and everything after the login page should be SSL (https://).
    If you login via the page at http:// does it not redirect to https:// ?

Maybe you are looking for