Profit center group field in profit center

When i create a profit center in ke51 system asking profit center group filed is required. but i donot required filed i need optional field where can i put that.

Hi
Is there a specific reason why you do not want to enter the Profit Center group field? Is it because you do not know them as of now and you want to update later?
The basic rule is the profit centers need to be assigned to a hierarchy.
Karthik
Edited by: Karthik Coneru on Mar 17, 2009 6:16 PM

Similar Messages

MRP group field can not be displayed in MRP1 view

Hi all
MRP group field can not be displayed in MRP1 view
please guide me
thx

Hi avinash
consulte your MM guy material master screen group and selection is done by MM guys in general. There they can do setting for this.
Also why you need MRP group. If it is maintained. It should be done properly otherwise it will create lot of problems.
Regards
J . Saravan

Start Routine to Populate Account Group Field from Master data of 0Customer

Hello Friends. Please help me edit this ABAP code to make it work. I am putting this code in start routine in between two DSO. where I am using the
Start Routine to Populate Account Group Field from Master data of 0Customer. I do not want to use read from master data functionality since that field 0customer is not there in dso but similar field 0debitor is there. so i want to put this code
during the load from source DSO to Target DSO.
Error Explicit length specifications are necessary with types C, P, X, N und
DATA: L_S_DP_LINE TYPE DATA_PACKAGE_sTRUCTURE.
    types: begin of comp,
     CUSTOMER       type /BI0/OICUSTOMER,
     ACCNT_GRP          type /BI0/OIACCNT_GRP,
   end of comp.
    DATA: l_S_comp type comp.
    DATA: L_th_COMP TYPE HASHED TABLE OF COMP WITH UNIQUE KEY customer INITIAL SIZE 0.
IF L_th_COMP[] IS INITIAL.
SELECT CUSTOMER ACCNT_GRP FROM /BI0/PCUSTOMER APPENDING CORRESPONDING FIELDS OF TABLE L_th_COMP.
ENDIF.
LOOP AT SOURCE_PACKAGE INTO L_S_DP_LINE.
READ TABLE L_TH_COMP INTO L_S_COMP WITH TABLE KEY CUSTOMER = L_s_DP_LINE-CUSTOMER
IF SY-SUBRC = 0.
L_S_DP_LINE-/BIC/ACCNT_GRP = L_S_COMP-/BIC/ACCNT_GRP.
MODIFY SOURCE_PACKAGE FROM L_S_DP_LINE.
ENDIF.
ENDLOOP.
soniya kapoor
Message was edited by:
        soniya kapoor

Hello Wond Thanks for Good Answer and good option, But Client does not like this option and does not like Nav Attribute so he does not want to turn on any Nav Attribute, In general also We hav requirement to read a third table while uploading 1 dso table to 2 dso table,
so Please help me edit this ABAP code to make it work. I am putting this code in start routine in between two DSO. where I am using the
Start Routine to Populate Account Group Field from Master data of 0Customer.
No syntax Error But during the load it is updating the source table and not the target table. how to define now target table.
***SOURCE DSO Table
types: begin of typ_tgl1.
    include type /BIC/AZDAFIAR000.
    types: end of typ_tgl1.
    types: begin of comp,
     CUSTOMER       type /BI0/OICUSTOMER,
     ACCNT_GRP          type /BI0/OIACCNT_GRP,
   end of comp.
DATA: L_th_COMP TYPE HASHED TABLE OF COMP WITH UNIQUE KEY customer
INITIAL SIZE 0.
data: wa_itab type COMP.
    data: wa_zdtg type typ_tgl1.
IF L_th_COMP[] IS INITIAL.
***Master Data Table
SELECT CUSTOMER ACCNT_GRP FROM /BI0/PCUSTOMER APPENDING CORRESPONDING
FIELDS OF TABLE L_th_COMP.
sort L_th_COMP by CUSTOMER.
ENDIF.
LOOP AT L_th_COMP into wa_itab.
select * from /BIC/AZDAFIAR000 into wa_zdtg
                    where DEBITOR eq wa_itab-CUSTOMER. *** SOURCE DSO Table
IF SY-SUBRC = 0.
wa_zdtg-ACCNT_GRP = wa_itab-ACCNT_GRP.
MODIFY /BIC/AZDAFIAR000 from wa_zdtg. *** modify SOURCE DSO Table
ENDIF.
endselect.
    endloop.
soniya kapoor

How to update a People and group field using a sandbox solution

Hi,
I am creating a sandbox solution for office 365 and creating a custom form using visual web part, which will allow users to enter data in a custom list.
And that list also have a user field. I am able to get SharePoint user field on the form (using javascript) which is searching for the user and get a value (working fine).
Issue: But I am not able to save the user value. Because to save user value I require web, UserID and login name, to construct SPFieldUserValue object or string in "111;#TestUser" format. Moreover that user should be present in
SiteUserInfoList.
I tried web.EnsureUser() but did not work under sanbox solution.
Can you please provide any pointer or workaround to the problem? I may be missing something here.
Thanks,
Himanshu

Hi,
According to your description, my understanding is that you want to update the people and group field in Sandbox solution.
In the sandbox solution, you can still use the web.EnsureUser() function to get the user information, see the thread below:
EnsureUser in sandboxed solution
In additional, there is a demo with your similiar requirement for your reference:
Using the People Picker Control in Sandbox Solutions / Office 365
Thanks
Best Regards,
Jerry Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

InfoPath - Populating People/Group field works on Create, but not on Edit

Hi- I have a scenario where there are a few data connections hooked up to a primary form. One of those data connections is connected to an assignment list. It consists of 3 columns (Warehouse(Text), Primary
User(People/Group), Secondary User(People/Group). This list is meant to be a dynamic source that my main form uses to determine assignments. I have a button that pulls in the data from that list onto my form. I am assigning the DisplayName to my DisplayName,
the Account ID to my AccountID and the AccountType to My AccountType. This works just fine when I go to create an item--> all values populate correctly, I can save my form with all of the newly brought in values.
For some reason, every time I open the form after that and try to use the same button, the query runs as normal, but my people/group fields do not populate - assuming they are not already populated. I
have validated that the rules are running and they are running with the values I want (I have written the values from the people/group fields to text fields and they appear to be correct).
I did look at the SP logs and it gave me this: Failed to get SPGroupName from GroupID. Error Message: Group cannot be found. Callstack: at Microsoft.SharePoint.SPGroupCollection.GetByID(Int32 id) at Microsoft.SharePoint.WebControls.PeopleEditor.set_SharePointGroupID(Int32
value).The StateManager is disposing and calling ReleaseLockedStates() (Count=0).
Any thoughts? I have not gotten any errors when interacting with the form. I had to pull this from the ULS logs.
Thanks, Jesse
Jesse A. Brandenburg

The rules go as following:
1) Switch Views to a more specific view (less fields showing)
2) Query Data Connection for assignments
3-12) Set primary contacts
This looks at my assignment list and based on the location sets the display name, account id and account type on
my form, based on what exists on the other list
*I have the same thing happening for 10 fields based on location. I am using a filter for each one to identify the correct location populates that person field.
13) I am setting a field to true that identifies that the rule was just run with a sign and date of username.
I have verified that the values are trying to be populated by looking at bothe the default values of the display name, account id, and account type of my people picker fields, however they are not showing anything within the picker itself. Additionally
I have a view that shows my assignments data connection that is populated correctly.
Thanks for your response -
Jesse
Jesse A. Brandenburg

Pulling user/group field data from SharePoint list using REST, jQuery, Knockout.js Sharepoint 2013

I'm trying to make an interactive task board based on the task list app in SharePoint 2013. The task lisk includes fields like "Title","Description","Status","% Complete","Due Date","Assigned To",
etc. I used knockout.js to bind "Title","Description", and "Status" to my HTML controls. Here is some of the code:
var ViewModal = function(items, listname){
var self = this;
self.sortBy = ko.observableArray(sortBy);
self.tasks = ko.observableArray(items);
self.listname = ko.observable(listname);
self.auto = ko.observable(false);
self.getTasks = function() {
clearTimeout(self.getTasks);
// server relative url to REST service endpoint
var ajaxurl = _spPageContextInfo.webServerRelativeUrl + "/_vti_bin/listdata.svc/" + self.listname() + "?$orderby=PriorityValue";
$.ajax({
type: "GET",
url: ajaxurl,
contentType: "application/json; charset=utf-8",
dataType: "json",
cache: false,
processData: true,
success: function (data, status, xhr) {
if (status == "success" && data) {
ko.mapping.fromJS(data.d.results, mapping, self.tasks)
$(".task-item").draggable();
error: alert
if (self.auto()) {
setTimeout(self.getTasks, 10000);
<div class="tasks-column">
<div class="column-header">Not Started</div>

<div class="task-item">
<div class="view" data-bind="visible: !IsEditing()">
<button class="edit" data-bind="click: $root.editTask">edit</button>
<h2><span data-bind="text: Title"></span></h2>
<div data-bind="html: Description"></div>
<span data-bind="text: PriorityValue"></span>
</div>
<div class="edit" data-bind="visible: IsEditing">
<button class="save" data-bind="click: $root.saveTask">save</button>
<input type="text" data-bind="value: Title"></input>
</div>
</div>
I'm having trouble displaying the data from the "Assigned To" user/group field. I tried:
<span data-bind="text: AssignedTo"></span>
But it displays the field as [object Object]
I tried using $select/$expand
?$select=Title,AssignedTo/Id,Assignedto/Title&$expand=AssignedTo/Id,AssignedTo/T‌itle";
But it still returns the [object Object]

Hi,
Please use the REST URI below:
/_api/lists/getbytitle('ListName')/items?$select=Title,AssignedTo/ID,AssignedTo/Title&$expand=AssignedTo/ID,AssignedTo/Title
More information for your reference:
How to get User Details and User Group Details in SharePoint 2013 REST API with Knockout for SharePoint Js (KoSpJs)
http://www.ashokraja.me/post/How-to-get-User-Details-and-User-Group-Details-in-SharePoint-2013-REST-API-with-Knockout-for-SharePoint-Js-(KoSpJs).aspx
How to Get Login Name and Display Name using SharePoint 2013 REST API
https://www.nothingbutsharepoint.com/sites/devwiki/articles/pages/how-to-get-login-name-and-display-name-using-sharepoint-2013-rest-api.aspx
Best Regards
Dennis Guo
TechNet Community Support

Search criteria is not working in Responsible Group field in sap crm could you please help me this how to achieve.

search criteria is not working in Responsible Group field in sap crm could you please help me this how to achieve.I have writen code on EH_ONSEARCH .as per below...what changess i need to do..and through partner function and adding the selection params please send the sample .
code. partner funtction - ZRG DATA :
DATA : lv_partner_fct type .
types: begin of ty_resp,
       partner    type but000-partner,
       name_last type but000-name_last,
       name_first type but000-name_first,
       mc_name1   type but000-mc_name1,
       mc_name2   type but000-mc_name2,
       end of ty_resp.
DATA: lv_resp_bp type STANDARD TABLE OF ty_resp INITIAL SIZE 0,
       lw_resp_bp type ty_resp.
IF lv_attr_name = 'Rgroup'.
lr_entity->get_property_as_value( EXPORTING iv_attr_name = if_crm_srqm_uiu_const=>gc_attr_low
                                   IMPORTING ev_result = lv_low ).
IF lv_low IS INITIAL.
SELECT partner
       name_last
       name_first
       mc_name1
      mc_name2
FROM but000 INTO table lv_resp_bp
WHERE mc_name2 = lv_low and bu_group = '0010'.
loop at lv_resp_bp into lw_resp_bp.
    lv_low = lw_resp_bp-mc_name2.
lr_query_service2->add_selection_param( iv_attr_name = 'Rgroup'
                                            iv_sign = lv_sign
                                            iv_option = lv_option
                                            iv_low = lv_low
                                            iv_high = lv_high ).
ENDLOOP.
if lv_partner_fct = 'ZRG'.
lr_entity = lr_iterator->get_next( ).
CONTINUE.
ENDIF.
lv_attr_name = 'BU_PARTNER'.
ENDIF.

<b>You can acheive   this .... first by creating the search help exit    ... by creating the maintaince view   then   using it in the   Creation of the search help </b> ...
see the link for attaching the view   to the serach help .
<a href="http://">http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_elementary.htm</a>
reward points if it is usefull...
Girish

Sales Group field should come in to S_ALR_87012178 AR report

Hi,
1.Is it possible to bring the *Sales Group field from billing document to S_ALR_87012178 AR report. Actually we have pulled Sales group field from billing document to FBL5N report.But client dont want that.He wants Sales group field in S_ALR_87012178 report.please help me whether it is possible or not.
2. Is there any report in SD module which will show the sales group wise report.
Please help me...
Thanks
Suvarna

Hi,
You can go to F.99 in order to see all the reports for Customers.
Hope you will find the best suitable report.
When you are using "Drill down reports" do not forget to select
"Object list (more than one lead column)" this would give you a option to sort them the line items as you want.
Just for your information: SAP1 is the transaction code for all the reports in SAP.
Regards,
Ravi

Plug-in Request Group field into the external authentication plug-in

Hi all,
I'd like to know if anyone has already tried to filter who can have the permission to call the external authentication plug-in setting it into Plug-in Request Group field.
I've made some tests adding some users into groups OracleDASAdminGroup, OracleUserSecurityAdmins and groups that I've created under my DC settings. Unfortunatly, I've had no success.
Is possible to do this?
Thank you.
Message was edited by:
user571491

Hi all,
I'd like to know if anyone has already tried to filter who can have the permission to call the external authentication plug-in setting it into Plug-in Request Group field.
I've made some tests adding some users into groups OracleDASAdminGroup, OracleUserSecurityAdmins and groups that I've created under my DC settings. Unfortunatly, I've had no success.
Is possible to do this?
Thank you.
Message was edited by:
user571491

How to modify person or group field value with new value

Hi
I have person or group field having property Person Only.
Thsi firls already have one value. Now I want to update it but this code to update value is not working.
string myName = @"ABC\myname";
web.EnsureUser(myName);
SPUser myUser = web.SiteUsers[myName];
SPFieldUserValue myNamevlaue = new SPFieldUserValue(web, myUser.ID, myUser.LoginName);
oSplistItem["My_x0020_User"] = myNamevalue;
oSplistItem.Update();
I am getting myNamevalue correct in the veriable. But why its not updating in the list?
is there any issue in the above code?
Do I need to delete previous value and then update new value in this field? How?

Hi,
The format of the user value in people/Group field must be
ID;#Name, you can use the following code snippets to update the people/group field.
string loginName = "ABC\\myname";
SPUser user = web.SiteUsers[loginName];
SPList list = web.Lists.TryGetList("ListName");
if (list == null)
Console.WriteLine("list is not exist!");
return;
SPListItem item = list.GetItemById(3);
item["My_x0020_User"] = user.ID.ToString() + ";#" + user.Name;
item.Update();
Thanks,
Jason
Please remember to mark the reply as answer if it help, and unmark the answer if it provide no help.

Solved - Group Fields for Vendor Master Records in IMG

This was the solution.
The new field's data element I added to LFB1 did not have the "change document" field checked. I made that change and now that field shows up in IMG.
Hello all,
I added an append structure to the table LFB1. This structure has 1 field. I then created a "Modification-Free Enhancement of Vendor Master Record" to add the new LFB1 field to the vendor master screen, edit and display screens. This is the 3rd time I have done this. So far so good.
Now our functional analyst went into IMG to add this new LFB1 field to a "Group Fields for Vendor Master Records" which we have done 2 other times.
The new LFB1 field does not show up in the list of possible Table-fields.
There must be some other step I am missing.
Does any of this ring a bell? We are on version 4.7.
Thanks
Bruce
p.s.
This is the IMG path for adding 'Field Groups' to vendor master fields.
Financial Accounting/
Accounts Receivable and Accounts Payable/
Vendor Accounts/
Master Data/
Preparations for Creating Vendor Master Data/
Group Fields for Vendor Master Records
Edited by: Bruce Tjosvold on Nov 21, 2008 1:18 PM

Hi Vandana,
There are several tables that are contain Vendor Master related data which can be used for extraction to BW. Some of the tables which can be useful for you are:
LFA1 : Vendor Master (General Section)
LFM1 : Vendor master record purchasing organization data
LFBW : Vendor master record (withholding tax types) X
WYT3 : Partner Functions
LFBK : Vendor Master (Bank Details)
LFB1: Vendor Master (Company Code)
ADRC: Addresses (Business Address Services)
ADR3: Fax Numbers (Business Address Services)
ADR6: SMTP Numbers (Business Address Services)
ADRT: Communication Data Text (Business Address Services)
You may use the Data sources mentioned in the previous update from Venky above namely :
0VENDOR_ATTR --- for master data attributes
0VENDOR_TEXTS -- For texts
Since the fields that you are using are from different tables so its better if you go for a Generic Data source where you can use the fields as per your requirement.
Thanks
Pawan
Edited by: pawan190187 on Aug 19, 2011 12:40 PM

G/L Account Group field in FI

HI all,
I need a report based on the G/L account group from ECC. in BI. I have searched all the datasources in FI like AR ,AP and GL ,but couldn't find the datasource which has G/L account group field.
Actually my requirement is I need to pick some specific G/L accounts based on G/L account groups.I found the G/L accounts and chart of accounts but not the G/L account group.
Thx

Hi Srikanth,
Thanks for reply,
You are right we need to load hierarchy for G/L then we can see all the G/L's for all G/L groups.
I have one more question when I check in RSA3 for the G/L account numbers, I could not find them.
I am using the datasource fi_gl_4 and in rsa3 I can see 1000 records data and when I put filter on G/L account and search for the G/L number I needed I cant see it, but it is there in the functional transaction(f.01)?
How to check for the required G/L's in rsa3 ?
Thx

FB03 display restrictions by using corporate group field of Vendor master

We had new requirement for the FB03 Transaction display.
1> In vendor master data we are assigning the Secure and non-secure for the corporate account group field. Based on the Secure and non-secure, we have to restrict the FB03 transaction display.
2> If itu2019s secure vendor, then no one should have authorization to display the documents belongs to these vendors of any transactions (Fb03 or FBL1N).
So based on this criteria we need to restrict the display for FB03 transaction.
thanks and regards
Prathap

Hello Pratap
Please seek help from your SAP BASIS
How it works is
1. You have a T code
2. You see which roles use it
3. Then accordingly you can tag that role to the User
4. Moreover when basis works they check in SUIM t code as to which roles the T code is tagged to and then they go ahead and assign the same to the user
5. There is another t code PFCG where they create z roles as well since standard roles are not used by them. And in this t code the authorisation objects are handled as well and profiles and roles are created. This is then tagged to a user.
6. then this authorisation is visible in SU01 in the user
Thanks and Regards

Vendor Master Management - How to make 'Corporate Group' field an autoupdat

Vendor Master Management - How to make 'Corporate Group' field an automatically updated field
Frnz,
I am doing a Spend Analysis and thereby restructring some aspects of SAP and business processes. One of the intiatives is to leverage the 'Corporate Group' field in Vendor Master for getting the consolidated spend visibility at the corporate group level of vendors. So far this field wasn't been used to effect. I can update it manually, but the question remains is how do I do with the change management of the corporate group of large vendor base in the scenario of everhappening Mergers and Acquisitions. Are there any alternatives anybody can suggest ? (Like linking D&B numbers etc)
Thanks in advance for your suggestions..

Hi Shiv,
Let me elaborate the purpose of using this field. I want to have a consolidated spend visibility across a corporate group which has multiple vendor codes. Its difficult everytime to group the spends of these vendors manually especially when the number of vendors are too high. Also sometimes the names of vendor companies may not indicate that these are from same corporate group but in fact they could be. In order to have the reports generated on corporate groups, I must maintain this field in vendor master or a Z table. But the problem here is, it should be possible to update this field as and when there are any mergers or acquisitions at vendor side and the corporate group of a particular vendor gets changed due to this. So this has to be effected in vendor master or Z-table automatically. I do know that there are certain agencies like Dunn & Brad (DNB) which provide possibly the details on corporate group of a company but its not fully effective for Indian Vendors as its not mandatory on them to have DNB number & also its a disconnected process and I was looking to connect it seamlessly to Corporate Group field so that I need not bother to update these things manually everytime. I also wanted to explore various possibilities of doing this.
I hope I have spelled it out correctly.

Set "peoples or groups" field with current user "login name" in sharepoint list form using javascript

hi friends
i am trying to set peoples or groups field in sharepoint list form with current user login name
here my code
<script src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.9.0.js"></script>
<script type="text/javascript">
$(document).ready(function NewItemView () {
var currentUser;
   if (SP.ClientContext != null) {
      SP.SOD.executeOrDelayUntilScriptLoaded(getCurrentUser, 'SP.js');
   else {
      SP.SOD.executeFunc('sp.js', null, getCurrentUser);
   function getCurrentUser() {
      var context = new SP.ClientContext.get_current();
      var web = context.get_web();
      currentUser = web.get_currentUser();
      context.load(currentUser);
      context.executeQueryAsync(onSuccessMethod, onRequestFail);
   function onSuccessMethod(sender, args) {
      var account = currentUser.get_loginName();
      var accountEmail = currentUser.get_email();
      var currentUserAccount = account.substring(account.indexOf("|") + 1);
   SetAndResolvePeoplePicker("requester",account);
// This function runs if the executeQueryAsync call fails.
   function onRequestFail(sender, args) {
      alert('request failed' + args.get_message() + '\n' + args.get_stackTrace());
function SetAndResolvePeoplePicker(fieldName, userAccountName) {
   var controlName = fieldName;
    var peoplePickerDiv = $("[id$='ClientPeoplePicker'][title='" + controlName + "']");
    var peoplePickerEditor = peoplePickerDiv.find("[title='" + controlName + "']");
    var spPeoplePicker = SPClientPeoplePicker.SPClientPeoplePickerDict[peoplePickerDiv[0].id];
    peoplePickerEditor.val(userAccountName);
    spPeoplePicker.AddUnresolvedUserFromEditor(true);
</script>
but it is not working
please help me

Hi,
According to your post, my understanding is that you wanted to set "peoples or groups" field with current user "login name" in SharePoint list form using JavaScript.
To set "peoples or groups" field with current user "login name”, you can use the below code:
<script src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.9.0.js"></script>
<script type="text/javascript">
function SetPickerValue(pickerid, key, dispval) {
var xml = '<Entities Append="False" Error="" Separator=";" MaxHeight="3">';
xml = xml + PreparePickerEntityXml(key, dispval);
xml = xml + '</Entities>';
EntityEditorCallback(xml, pickerid, true);
function PreparePickerEntityXml(key, dispval) {
return '<Entity Key="' + key + '" DisplayText="' + dispval + '" IsResolved="True" Description="' + key + '"><MultipleMatches /></Entity>';
function GetCurrentUserAndInsertIntoUserField() {
var context = new SP.ClientContext.get_current();
var web = context.get_web();
this._currentUser = web.get_currentUser();
context.load(this._currentUser);
context.executeQueryAsync(Function.createDelegate(this, this.onSuccess),
Function.createDelegate(this, this.onFailure));
function onSuccess(sender, args) {
SetPickerValue('ctl00_m_g_99f3303a_dffa_4436_8bfa_3511d9ffddc0_ctl00_ctl05_ctl01_ctl00_ctl00_ctl04_ctl00_ctl00_UserField', this._currentUser.get_loginName(),
this._currentUser.get_title());
function onFaiure(sender, args) {
alert(args.get_message() + ' ' + args.get_stackTrace());
ExecuteOrDelayUntilScriptLoaded(GetCurrentUserAndInsertIntoUserField, "sp.js");
</script>
More information:
http://alexeybbb.blogspot.com/2012/10/sharepoint-set-peoplepicker-via-js.html
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Profit center group field in profit center

Similar Messages

Maybe you are looking for