Profit segement is reqd

Hi All,
I am new to Controlling.
My end user has created one gl account i.e, 5005116 (same created as cost element). For this gl, in OBC4 profitability segment made as reqd field.
Now, when they are posting MIRO system threws error message like "Field Prof.Segmt is a required field for G/L account 5005116" hence, accounting doc does not generate.
- Is there any assignments in OBYC
- Is there any config in OKB9
Looking forward your valuabl replies/thoughts
Thanks
ani
Edited by: Anifi on Sep 1, 2008 12:15 PM

Hi Anifi,
Goto FS00.. click on the GL 5005116.
Check the field status variant.
The profitability segment tab must have been suppressed.
Make it optional and you can then generate the accounting document.
Good Luck!
Lucid-Mind...

Similar Messages

  • Field profit segement is a reqd. field for G/L account

    Hi Everybody,
    I know its a very simple thread but functionality would be different
    When i am doing GR in MIGO system gives an error message "Field profit segement is a reqd. field for G/L account XXXXXX". I know field status needs to be change but do not want to change it. is there any other way to resolve this issue? is it realted to OKB9 or 3KEH config?
    Adv thanks
    VK

    Hi Dianne,
    Thanks for your quick response
    We already have been maintained profit center in material master. In PO we have maintained acct. assign category is K and given GL account and cost center. in cost center we have maintained profit center.
    Still it be reqd in OKB9?
    error message no. is. F5808
    Thanks

  • Profit Segment through IDOC Acc_document02

    Hi all,
    We are not implementint module FI-PA. I'm trying to add fields from the profit segment (trasc. FB50) through idoc acc_document02. The fields ofcourse are not in any segment of the idoc. I wanted to add them throught the extension idoc like I did with other fields but the fields of the profit segement are not in structure ACCIT.
    Can anyone help?

    Dear Tomer
    U can use segment type E1BPACKEC9 there you can add fiekd from the profit segment via FIELDNAME and its desired value via CHARACTER,
    Enjoy,
    Eyal

  • Error-M2O-Settlement rule for assembly order for item...could not be genera

    Hi,
    When I am creating Sales Order (VA01) for M2O, I am able to do the costing and copy the EK02 condition type. I have verified the the incompletion log, it indicates that document is complete.
    But while saving the sales order, the below error message is displaed:
    Settlement rule for assembly order for item 000010 could not be generated. Should the order still be saved?
                    Yes/No
    1. If No is choosen the following error message is displayed
           Error when processing Production order
          Error when processing Production order
          Message no. V1380
          Diagnosis
            A technical error has occurred. On calling up the assembly interface, exception 5 was triggered. The exceptions have the  following meanings:
    1 = External block,  2 = General error,  3 = Insufficient data for the interface,  4 = Order was not found, 5 = Update has been rejected, 6 = Final document number for Production order is not issued.  Procedure: Inform your system administrator.
    2. If Yes is choosen, it is creating Production Order without settlement rule. Able to perform GI & Gr. If I try to enter settelement rule (Settlement receiver SDI - Sales document item) in production order (CO02), the belwo error message is displayed
    "Distribution rule for Sales document item can only be created automatically Message no. KD063"
    We are using the requierement class with below details:
    Reqmts class: ZSO- for M2O
    AAC = E, Valuation = A, Settlement profile =SD1, RAKey = 000004, Assembly type = 3.
    Settlement profile contain:
    Allocation structure, PA structure, Default object type = SDI. Valid receivers: Optional -Sales Order / Prof. seg.
    If I make the Valuation field as blank in Reqmts class, there is no error while creating Sales order. And also Settelemnt rule with sales document item as receiver is successfully creating for the production order. Since the Valuation is blank in requirement class, it is Non valuated Sales order stock. All GIs & GR are non valuated
    The business requirement is it should be valuated sales order stock and the production varinaces has to be settled to Sales order. Then Sales order has to be settled to COPA.
    Need your valuable inputs to meet this requirement.
    Let me know if you need any further details.
    Thanks in advance.
    Regards,
    ADI

    Dear SAP PP Consultant ,
    What is the strategy group you are maintained in the material master ?

  • CO-PA Automatic Account Assignmet

    Dear Co Experts,
    I created accrual condition in pricing procedure. In my company only costing based co-pa is active.When i do billing system is flashing KI183 error(creation of prof.seg to primary cost elements is not advisable in costing based co-pa).Then i deleted this error in my company code.Now at the time of billing system is not flashing error.it is creating 3 documents one each for fi, controlling area & co-pa. but the value of accrual condition is not flowing to copa. i already assigned this condition to Value field. Can any one explain me how to bring the value to CO-PA.
    regards,
    siva

    Hi Siva,
    Cost-element type 01 is for primary costs
    Cost-element type 11 and 12 is for postings to CO-PA. It is possible without problems to use 01, but when you use 11/12 you have to fill in the co-pa segment with your posting
    Paul

  • Accounting Document and Sales Order No

    We have an accounting document number. And while putting the document number in FB03, I am getting the entry view of thr document. And while clicking on a particular line item, there is an additional assignment block, in that block there is a field Profit Segement. And in that, there is a field Sales Order. How I can access that value with correspondance to accounting document number. Is there any table, from where I can get that data directly?

    I just want to know when we done PGI against sales order it genetrate an acconting document .
    Can any one tell me in which  fi and sd tables this entry filled.

  • FI Link with MARA

    Hi Friends,
    I need a link in FBL3N or BSEG or another table that gives me all the FI line item information and a key field by line that I can link to the MARA table.
    Best Regards
    Prashant

    Thanks for the information,
    I think I did not mention the correct problem ,
    I am looking for Product ( ADRNR ) which is in MARA table.
    BSEG doesn't have the material in my data.
    But when I go in Profit segement , I see the product.
    there is a COPA related table CE10001 , I think this table I need to join.
    <b>I want the Product number based on the Accounting document  </b>
    I hope this helps.
    Thanks

  • COPA Charcteristic group for assignment screen --KE4G/ FBCJ

    Hi,
    We have Account based COPA. I have created one Charcteristic group and have assigned this group to Business Transactions  which are RFBU, RFBV,RFIG,RKU2(T code KE4G).  In entry aid,only cost center and profit center is required in Profitability segment being real cost object while posting any revenues. (SD module is not implemented).
    In invoice posting (T code FB70) user has to first specify Cost center and has to click on Prof seg tab being real cost object . Here the profit center  gets automatically picked up as it is defined in Cost center master.
    Now the problem is , in Tocde FBCJ, (Cash receipts) if I select business transaction type "other Receipts" and use the same GL of revenue which I use in FB70, system is not deriving Profit center automatically even if  I am specifying cost center first and clicking on Prof seg tab
    What could be the problem? Do i need to add any other Business transaction in Tcode KE4G or any setting is required in FI.
    Request for the help.
    regards,
    makrand

    Hi
    I dont know why in FBCJ it should behave differently...
    Can you try the below steps and see if PC gets derived from CC in FBCJ
    1. Try to post the entry just be entering a CC..
    2. System would give an error that real object is required for posting
    3. Convert this error into warning in OBA5...
    4. Now try to repost the doc right from start in FBCJ
    Once the doc gets posted, check if PC is derived or not... Ofcourse, you can do this only in a test client
    Regards
    Ajay M

  • IO settlement rule logic

    Dear Experts,
    We wanted to settle a IO to G/L account (COGS).
    Distribution rules:
    Acct. assig. cat: G/L
    settlement receiver: 51110003 (COGS)
    100%
    We also maintained detail distribution rules in settlement receiver.
    CTR: 101019
    Profit seg.: Customer/Sales Group/Sales employee ...etc.
    However, after excuting IO settlement, we can only find all expense settle to G/L account.
    "CTR & Profit seg.: Customer/Sales Group/Sales employee" are all blank.
    Is that correct?
    Thanks in advance.

    Hi,
    In settlement receiver key you can assign cost center order combination, GL Bus. Area combo or else Profit center.
    You cannot settle the internal order on GL and cost center at the same time.
    Regards,
    Divraj
    ...........Check if that GL is assigned to any cost center in OKB9 that what happens.
    Edited by: Divraj Agarwal on Aug 25, 2011 9:48 AM

  • Problem while creating Sale Order with Reference

    Hi Friends,
    While creating a Sale Order with Reference, I am unable to copy few fields from Profit Segement(CO - PA Data) in Account assignment Tab.
    Any solution how to copy all field values which are in Reference Sale Order Number.
    Regards,
    sg.

    Hi,
    Go to VOFM you will find out data transfer routine.
    Over here go for the order data transfer routine and select your data transfer routine which you use.
    Now check you field name and table name for that particular field which was not copying.
    It will be better if you ask your abaper for this.
    You have to make changes over here only for data transfer routine.
    Hope so this will help you out.
    Regards
    Raj.

  • Profit Center Master Data- Segement need to be changed

    Hello Gurus,
    We have somehow set wrong segment in Profit Center Master Data, We need to change the segment. Transction is posted to the profit center what is the easy way out to change the segment for profit Center master data?
    Any help will be apreciated? i have gone through the SAP Note
    940721  - KE52: Segment in prof center master record cannot be changed
    Or a work around solution.
    Thanks
    Prasad

    Hi Prasad,
    As you already find out, once there is transaction data on a profit center, the segment field is no longer changeable in order to prevent inconsistencies and incorrect result from the segment reporting point of view. This is standard system behaviour!
    You can try with the the following *Notes. It will provide further corrections relevant for your issue.
    *Notes:1373616    Segment in profit center changed despite transaction data
                1037986    KE52: Changing the segment in the profit center master data
    Regards
    Eugene

  • Bal field "Profit Center" in line item 001 not filled at the time of F-53

    We are in ECC6
    I have posted a vendor document.  The entry is shown as under.
         GL                           CC     PC     Segment
    Dr     Expense GL-1     RV01     RGV1     Hyderabad
    Dr     Expense GL-2     RV02     RGV2     Mumbai
    Cr     Vednor a/c               
    but when i am posting a payment document (Dr Bank GL and Cr vendor a/c) to this vendor I am getting the following error. 
    Balancing field "Profit Center" in line item 001 not filled.
    I have check ed the configuration setting in this regard.  Zero balance, mandatory fields for profit center and segement check box is enabled.  And also the inheratence check box is also enabled.
    Pls suggest soulution soon for the above problem.

    Hi,
    Try to default the profit center in FAGL3KEH for the Bank account and try posting.
    In SAP, the vendors and customers cannot be assigned to any profit center. They derive the profit center from the profit center picked from the GL as in the case of the expense entry that you mentioned.
    Try to assign a default profit center and check.
    Regards
    Hari

  • Business area, segment or profit center

    I have following situation. My customer is a company which is situated all over the country. So, this 'parts' of the company are acting like companies inside a company. There is a need for producing balance sheet and P&L statement per this parts. Next topic is that this customer has a need for producing balance sheet and P&L statement per line of businesses.
    My question is what to use. First idea was to create this 'parts' of company as a business areas and line of businesses to present as profit centers. My concern here is reconciliation between business areas and that now I have to include BA as an organizational element in the structure (every cost center belongs to BA, etc...). But I was reading about New GL and Segments and I came to an idea to use segment instead BA. But I can not find report, for ie. which should present AR or AP per Segment? Also, I don't know are segments sufficient for 'internal invoicing' which occurs in the company.
    My question is, can this needs be fulfilled with segments + profit centers approach, or I must use BA. 
    Thank in advance!

    Hello,
    whether you use BA, profit center or segment, you have to carefully assess whether you activate or not the NewGL setting that requires FI documents to match (debet=credit) by segment, for example.  If not activating, you can not easily guarantee that all line items are assigned to segement. If activating, there is a lot of spefication and testing to make sure that segment information is derived or entered.
    Good luck,
    Auvo Ahola

  • FF7B - Cash management Profit centre in the line item

    Hi,
    We are facing one problem at our end.
    We have upgraded our system to ECC 6 with new gl activated.
    Also activation of cash management (lequidity forecast) exist since 4.6C .
    Now with New GL activation in place and When we run FF7B -  ( Transaction to check the lequidity forecast ) it shows the summary details but when we drill-down to a line item level and copy profit centre as well as segment field from the layout for the line items the fields are appearing blank.
    Is anybody have the idea how to populate or update the profit centre as well as segement field in the same line item data in future and also for the past data.
    Thanks & Regards
    Mahesh

    this is available in Enhancement Pack 5.

  • Profit Center picking wrongly during billling

    Hi SAP Experts,
    We have one issue where wrong profit center is getting picked during the time of billing.
    The SD flow is Customer Contract>Exchange customer order>Purchase Order>Billing Invoice> Accounting Doc.
    Till Purchase Order the profit center is 100000 which is correct and is entered in customer contract & in material master data also. but in billing the profit center is changing to 400000.
    When i futher analyse this issue, i found out that the line item in the accounting doc for profit center 400000 is coming from COPA assignment. In OKB9 also Proft Seg is ticket for that Cost Element which is having profit center as 400000
    So is how to check where is this profit center 400000 assinged in value fields or some where else in COPA.
    Pls advice.

    Hi Gabriel
    I asked you when is the COPA doc generated? Is it generated out of SD Invoice (VF01) or is it generated out of MM Invoice?
    I would like to know your scenario in as many steps as you can describe...
    If the COPA doc is generated out of SD Invoice - Then record type of the document is F.. Usually, this picks up the PRCTR correctly from the originating document and there is no means of specifying a default profit center in this case...
    If the COPA doc is generated from MM, it will have record type B and this record type can take the default PRCTR from OKB9
    Regards
    Ajay M

Maybe you are looking for