Program exits when message manager capture an error
Hi Buddies,
I am new to web dynpro for ABAP and now I am doing some exercises.
In method check_input, I coded to capture an error using message manager. However, I find method FLIGHTTAB_FILL continue to run. I am wondering if there are some indicators (I find sy-subrc is still initial...any other indicators??) I could use to stop the program when an error is captured? Please advice. Thanks.
method FLIGHTTAB_FILL .
wd_this->check_input(
endmethod.
Kind Regards,
Clark
Hi,
If you use is_empty method, you can identify.
ABAP_TRUE if Message List Is Empty. So in your case, if messages are populated, space will be the value of the Boolean.
** get message manager
DATA lo_api_controller TYPE REF TO if_wd_controller.
DATA lo_message_manager TYPE REF TO if_wd_message_manager.
data lv_bool type abap_bool.
data lt_messages type if_wd_message_manager=>ty_t_messages.
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_api_controller->get_message_manager
RECEIVING
message_manager = lo_message_manager
.DATA lv_message TYPE string.
DATA lv_message_type TYPE i.
lv_message_type = if_wd_message_manager=>co_type_standard.
* report message
CALL METHOD lo_message_manager->report_success
EXPORTING
message_text = 'Success'.
* report message
"ABAP_TRUE if Message List Is Empty
Similar Messages
-
I have iMac and lion OS. When I try to download (free or not) any program it always message "There was an error in the App Store. Please try again later. (13)
http://www.apple.com/support/mac/app-store/contact.html?form=account
-
Timeout PJC - Problem exiting when Message box or LOV is displayed.
I'm trying to integrate the Timeout PJC into my Oracle Forms. During testing, I noticed that although the timeout expires and Form A displays an expiry message, Form B will not exit if a Message Box or LOV is present requiring a response by a user. Once the user responds and these windows are closed, the user is returned to Form A and the timeout works as expected.
All the code for the Timeout PJC including the Java Bean is in Form A. On Form
B, I'm using the WHEN-TIMER-EXPIRED, WHEN-WINDOW-ACTIVATED and
ON-ERROR triggers to handle the problem with the error message 41355
(Cannot navigate to Form ...) which works fine. Any suggestions will be greatly appreciated.Does anyone have any suggestion to my question below?. Is there a way to exit a Form when the Timeout PJC expires and a Message Box or List of Value (LOV) requires a response by the user. I would like to exit the form and the application when there is no activity after a specified time but I'm having this issue. Thanks for you assistance.
-
when i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program.
i am using office2007 with windows7 premium home edition. i have checked file associations., all DDE settings. i have even tried this in safe mode. the same thing happens. please note once i see the error. i can then go back to the file click on
it a second time and it WILL open. AND i can open any file if i open excel and and find the file from there. i uninstalled and re-installed office 2007 from scratch. And i checked the compatibility mode (all un-checked) still the problem persisits. this is
a real PITA. anyone have any solution for this? Thanks
ken yanowHi,
Have you try to un-select the Ignore other applications that use Dynamic Data Exchange (DDE) setting?
Click the Microsoft Office Button, and then click Excel Options.
Click Advanced, and then click to clear the Ignore other applications that use Dynamic Data Exchange (DDE)
check box in the General area.
Click OK.
If the problem cannot resolve, the Run as administrator may selected.
Go to Office default install location: C:\Program Files\Microsoft Office\Office12.
Right-click EXCEL.EXE > Properties >
Compatibility tab.
Under Privilege Level, uncheck Run this program as an administrator
check box.
Best regards.
William Zhou
TechNet Community Support -
Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem next time it launches". Except that it doesn't, I keep getting the same message and the program closes. Does anyone know what I can do to repair it? Can't back up, can't do anything.
There are dozens of threads in this forum that describe the fix
-
I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: DW041 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 1 error(s)
ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist. ------------------------------------------------------------------------------------- System Requirements and it will not install, It says cant find the path D: im not sure why because as far as I can see its set to install on drive C: which is where I want it!Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs -
When I try to start iTunes, I get the message "program can't start because MSVCR80.dll is missing from your computper. Try reinstalling the program." When I try reinstalling, I get the message Error 7 (Windows Error 126)
Can you help me?????Hello Charleen,
It sounds like you are unable to reinstall iTunes because of this error message 7. I recommend the troublehsooting found in the following article that mentions that error named:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thank you for using Apple Support Communities.
Take care,
Sterling -
Error when executing the program RBDMIDOC with Message type HRMD_ABA
Hello All
I finished the integration between CRM and HR
Now I am able to replicate the employees and the organizations, but when I created a schedule job for the program RBDMIDOC and message type HRMD_ABA the system gives me warning and message: no data selected for distribution even if I try to run the program using SE38 I am getting the same error message
I already activated the message type using BD50 and activated the Change pointers using BD61
Regards
Jacopo Fransoiceus the program
RHALEINI -
I have Acrobat 10 (10.1.9) that came in the Creative Suite CS5. I have received numerous messages about failed updates so finally did what was recommended by Adobe and uninstalled the program. Now I can't re-install it. These are the error messages I get. Help!
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DW065, DW066 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 2 warning(s)
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
WARNING: DW065: Display requirements not met for {53CF3920-648B-4F99-8D05-6A6C5298F57B}
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1328.Error applying patch to file C:\Config.Msi\PTDB05.tmp. It has probably been updated by other means, and can no longer be modified by this patch. For more information contact your patch vendor.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1328.Error applying patch to file C:\Config.Msi\PTDB05.tmp. It has probably been updated by other means, and can no longer be modified by this patch. For more information contact your patch vendor.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failedI did it through CS, I think. I used the installation disk and selected Acrobat. It loads and then gives me all kinds of error messages and then uninstalls itself.
-
Error Message "Lightroon encountered an error when reading from its preview cache and needs to quit"
Error Message "Lightroon encountered an error when reading from its preview cache and needs to quit"
It says thes everytime I try to open Lightroom and then quits the program.
Help please--thanksUsing your system browser, go to your catalog folder and look for a folder with the extension .lrdata and delete that folder. You will have the same name as your catalog but with the different extension. DO NOT make the mistake and delete your catalog. After you delete that folder Lightroom should start and will begin building a new previews folder.
-
Error message is 'The Request Error : 400' with SAP Download Manager
Hello,
The authorization object SWDOWNLOAD (download software) is assigned to the My user ID.
But I could not download below that file.
SAP_ABA 710 (4~8)
SAP_BASIS 710 (4~8)
PI_BASIS 2006_1_710 (4~8)
SAP_BW 710 (4~8)
Error message is 'The Request Error : 400' with SAP Download Manager
I logged on to SAP Service Marketplace, software download area /swdc.
I have created objects in the download basket and have received approvals (->Maintenance-Optimizer) where required.
I start the SAP Download Manager and the objects from the download basket are visible in the object list of the program window.
After I choose "Objects for Download", the system starts the download.
In the info-line (in the lower part of the window), the system displays the message 'Processing object...' and then 'The request failed: 400'.Hello,
In these cases the following things should be checked:
1.- Please be sure that you are using the latest Donwload Manager version
2.- S-User and password should be active
3.- Specify the proxy. Please refer to SAP Note 155954
4.- It might be that you are not licensed for the product you want to download.
If the checkings above are correct and the problem is still alive, I would recommend you to open an SAP customer message under component XX-SER-SAPSMP-SDM providing the following information:
1.- The exactly software product name and package or stack number you try to download.
2.- Attach to the message the results of the trace file generated as per note 574885:
574885 - Download Manager: Generate trace file for analysis
I hope this helps you.
Regards,
Blanca -
How to capture Exception error message in Odata ?
Hi,
I am new to sap gateway. Currently i am creating a Odata Service through the transaction SEGW. In the query i have mapped a RFC. When i execute the service sometimes the RFC throws exception like 'No data Found'. But i dont know how to capture the exception returned from the RFC.
I read some threads which says use
RAISE EXCEPTION TYPE /IWBEP/CX_MGW_BUSI_EXCEPTION
EXPORTING
textid = /iwbep/cx_mgw_busi_exception=>business_error
message = lv_text
message_container = io_message_container.
My doubt is since i have not done any code in the DPC method. As said in many threads should i go to DPC_EXT method and redefine the method or how to capture the exception.
Kindly advise. Thanks in advanceHello Velsankar,
You need not to capture the error messages explicitly by writing custom code in you DPC_EXT if you are using service builder when the return error message table is of type BAPIRET2.
GW itself will handle and return the error messages.
If at all the return error message table is of different type , i mean to say if it is not of type BAPIRET2 then you need to capture explicitly.
The below is the code you need to write in DPC_EXT to capture.
DATA: LO_MECO TYPE REF TO /IWBEP/IF_MESSAGE_CONTAINER.
DATA: LX_BUSI_EXC TYPE REF TO /IWBEP/CX_MGW_BUSI_EXCEPTION.
LO_MECO = MO_CONTEXT->GET_MESSAGE_CONTAINER( ).
LO_MECO->ADD_MESSAGES_FROM_BAPI( IT_BAPI_MESSAGES = LT_ERR_RET_TAB ).
CREATE OBJECT LX_BUSI_EXC
EXPORTING
MESSAGE_CONTAINER = LO_MECO.
RAISE EXCEPTION LX_BUSI_EXC.
Note : where LT_ERR_RET_TAB is your internal table where you would have captured all the error messages.
That is it. You will be able to see the messages .
Regards,
Ashwin -
File Error: Unkown File when attempting to capture
I teach an intro to video production course and my students keep getting this error:
File Error: Unkown File
when trying to capture footage. It doesn't matter if they're using capture now or batch capture. This error message comes up and they can't capture. I've tried different machines and shutting down and restarting, but have had no success. They're using FCP 6 and most of the computers are dual processor G5s.
Any thoughts? I've seen other discussions about this error, but none where it happens when trying to capture.
Thanks.I suppose you chose easy setup DV PAL 48khz
Audio to capture in FCP should always be 16bit 48khz.
Are you saying that sound was recorded at 32khz (12 bit)?
If so then there might be indeed problems with FCP. -
Error 8 while upload the program : row 425 message
Can any one answer this ?
I am not using Any lower case letters any special characteristics in the flat file.
But still i am getting the same error "Error 8 while upload the program : row 425 message "
Thankshi padma
or chk this
In case of the flat file datasource, when you assign flat file source system again, the system assign IS to the old transfer structure! Because of the same DS name.
There are 2 remedies.
1. Log off the system. During the current session the system may keep deleted IO, TRs, URs etc and propose them again. Log off should wipe deleted objects.
2. If the #1 didn't help. - Recreate an infosource with a new name. Create all other structures as needed.
reg
ashwin -
Acrobat X problem updating.
ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
MSI Error message: Ugyldigt drev: K:\
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
I have uninstalled my AcrobatX and now This message appear when I try to reinstall:
ERROR: Install MSI payload failed with error: 1603 - Alvorlig feil under installasjonen.
MSI Error message: Ugyldigt drev: K:\
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Is there anybody who know how to solve it?Hi Patricia ,
For error 2203 ,please refer to the following link.
https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
For error 1603 ,refer to this link.
https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Let us know if this solves the issue .If required ,we"ll surely assist you further.
Regards
Sukrit Dhingra
Maybe you are looking for
-
I have had problems with my broadband connection for over a week now. I have rung BT on two occasions and spent up to 45 mins and 30 mins respectively and been passed around all the departments as no-one appears to have any idea what is the problem.
-
Photos from iPhone direct to Drive?
I take hundreds of photos and videos while on vacation. Is there any way to get photos and video off of my phone (to make room for more) while on the road without my Macbook or using the internet/data transfer?
-
A problem with java program(reset problem in java GUY)
I do not know how to make the button reset,my program only could reset diagram but button.If any one who could help me to solve this problem.The problem is When the reset button is pressed, the image should immediately revert to the black square, and
-
DVD wont be recognised on iMac
I was given a happy snap holiday dvd, It plays on my sony dvd Player and looks great on the TV. I need to copy it and found that my iMac cannot recognise the disk. I think it has not been finalised. Can I play it though my dvd player, connected someh
-
5200 ONLY ALLOWS for 960 X 1280 resolution in Windows XP
The driver for my GeForceFX 5200 isn't letting me use my monitor to its full capacity of 1024 x 1280 resolution. Before I installed the driver, it would. Running Mandrake 9.2 Linux and Fedora core lets me run it in 1024 x 1280 Windows limits it to