Project Code Update after AR Invoice posted

Dear Experts,
I have AR Invoices with blank Project Codes on the rows. Is there anyway to updated these?
Holding thumbs,
Adriaan

Hi,
You can update, its journal entry if you want to update,
First clicking its Journal Mark,
Where the screen shows the entry of AR invoice, There you can update the project code.
try this, and not possible at A/R invoice itself.
Regrds
Sadhik
Edited by: sadhikmba2006 on Nov 22, 2010 3:28 PM

Similar Messages

  • Project code from A/P Invoice and GRPO to Journal

    Dear Friends,
    Could you please specify the reasons for the following problem in SAP B1
    The assigned Project code in A/P Invoice and Goods Receipt PO is not getting into its corresponding Journal Entries. But in the same company for other documents this functionality is working.
    Edited by: Paul Finneran on Oct 15, 2009 12:37 PM

    it comes in the row level (line items) of the journal.

  • Project  code updation in JE

    Hai,
    While creating an A/R invoice - Project is getting updated in JE if we set the same in Settings - A/R Invoice (Project) in row lever & header level except the GL Accounts related to  Service Tax, Ces & Ecess. Even if we set the project in COA -> Accounts Details -> Project it is not getting updated in Project column in JE.
    Pl. help to solve this issue as the project code should be updated automatically in all the rows  in JE while creating A/R Invoice
    Thanks & Regards
    Narayanan

    hi,
    I tried that option also it is getting updated only in row level and BP but not in service tax GL A/c. Only service tax GL are not being updated.
    below is the JE
    Particulars           Dr.             Cr.              Project
    Vendor A/c       1011                             Unit 1 Sales                                 900.00         Unit 1
    Ser.Tax 12%                       108.00        Not updated
    Cess @ 2%                            2.00        Not updated
    E Cess @ 1%                         1.00        Not updated
    Can anybody address how to update the project in Ser.Tax A/c.
    Regards
    Narayanan

  • Business place/Section code updation after postings from FI

    Hi,
    i want to update the documents with business place/section after postings the  documents. for MIRO documents there is a t code JNINPP  to update the  business place/section code after documents postings, but i need to update for FI documents like..SA,KZ documents types. Can anybody share me the solution to resolve the issue.
    Thanks & Reg
    Nagesh

    Hi Nagesh,
    You can update the Business Place and Section Code with the help of ABAPer. The posted TDS Documents would be stored in table WITH_ITEM and there you can do change accordingly.
    Regards
    PG

  • Tax code update after new pricing in Purchase order (me22n)

    hello,
    I have implemented the badi's ME_CHECK_ALL_ITEMS, ME_DEFINE_CALCTYPE
    to make a new pricing when the country of Sales Tax id (STCEG_L) changes.
    Everything works fine, except the TAX CODE won't be updated on the tab 'invoice'
    Daoes anyone know how I can handle this?
    thanks
    Werner

    Hello Ajit
    Please understand the question before answering.
    The requrement is, to get updation of tax code in PIR, when a PIR is created first time through info update from PO item.
    warm regards
    ramSiva

  • MIRO - Copy Code from PO during Invoice posting

    Hi,
    I need to copy Company code from PO ie line item to the header in MIRO transaction during saving. I saw all the enhancements and BADI and feel I cannot change company code at header. Can any one tell me if I am correct or if it can done? How ?.
    thanks,
    ~Hemanth

    You are correct. It can not be done.

  • Table updation after Invoice parking/ posting through FBV1

    Hello Everybody,
    Can anybody help me to know what are the tables are updating after parking and posting the FI invoice through transaction code FBV1 and what is the process to check what tables are updated ..
    thanks a lot in advance..
    Regards,
    Umakanta

    Hi Any views
    Suresh

  • SP to work in AR Invoice row for Project Code excluding One Document Series

    Hi Experts,
    I have a SP and its working fine to check wether project code is entered in the row level of the invoice. Now I have 4 document series named 1) Wholesale 2) Trading 3) Manufacturing 4) General
    I want this this stored procedure should only check and give error for the series 1) Wholesale 2) Trading 3) Manufacturing and not for series General. Can it be done for SP to warn for specific series and if there is no Project Code given in General Series then the document should be added to the system.
    My SP is as under :
    ----Project Code
    IF @transaction_type IN ('A', 'U') AND @object_type = '13'
    begin
    if exists (SELECT DISTINCT ISNULL(T0.Project,'') FROM [dbo].[inv1] T0 WHERE T0.Docentry=@list_of_cols_val_tab_del)
    begin
    SELECT @error = 10, @error_message = N' Project Code is missing....'
    end
    end
    Is there any options by which I can use the same SP for all marketing document by making a single Stored Procedure or I have to make seperate for each individual marketing document.
    Regards,
    Kamlesh
    Edited by: Kamlesh Gupta on Mar 21, 2009 1:15 AM

    Hi,
    I am trying to write a SP as under :
    ----Project Code
    IF @transaction_type IN ('A', 'U') AND @object_type IN ('13','15','16','17')
    begin
    if exists (SELECT DISTINCT ISNULL(T0.Project,'')
    FROM [dbo].[inv1] T0 INNER JOIN [dbo].[OINV] T1 ON T0.DocEntry = T1.DocEntry,
    FROM [dbo].[dln1] T0 INNER JOIN [dbo].[ODLN] T1 ON T0.DocEntry = T1.DocEntry,
    FROM [dbo].[rdn1] T0 INNER JOIN [dbo].[ORDN] T1 ON T0.DocEntry = T1.DocEntry,
    FROM [dbo].[rdr1] T0 INNER JOIN [dbo].[ORDR] T1 ON T0.DocEntry = T1.DocEntry
    WHERE T0.Docentry=@list_of_cols_val_tab_del
    begin
    SELECT @error = 10, @error_message = N' Project Code is missing....'
    end
    end
    to block documents which does not have poject code but I am getting an error while executing it as under :
    Msg 156, Level 15, State 1, Procedure SBO_SP_TransactionNotification, Line 275
    Incorrect syntax near the keyword 'FROM'.
    Also note that when I am having only one SP as under :
    AR Invoice Project Code
    IF @transaction_type IN ('A') AND @object_type = '13'
    begin
    if exists (SELECT DISTINCT ISNULL(T0.Project,'') FROM [dbo].[inv1] T0 WHERE T0.Docentry=@list_of_cols_val_tab_del)
    begin
    SELECT @error = 10, @error_message = N' Project Code is missing....'
    end
    end
    then if in AR invoice there is No project Code then its giving an error to put to project code but after putting the project code in the row level also the AR invoice is not getting added to the system. It gives me the error as
    [ADOC] Project Code is missing....'
    What might be the problem please let me know.
    regards,
    kamlesh
    Edited by: Kamlesh Gupta on Mar 21, 2009 11:25 AM
    Edited by: Kamlesh Gupta on Mar 21, 2009 12:28 PM

  • Aging report - detailed needs invoice project code

    Dear All,
    Would it be possible for us to have project code (on A/R invoice header) on Aging report - detailed print layout? I found all fields in Aging report - detailed PLD are sys var. Is there a way for us to figure out which sys var is for project code of the invoice? Thanks a lot.
    Regards,
    Yuka

    Unfortunately you can't, you have to recreate it using crystal. In all SAP std reports you only able to show/print what it already shows.

  • Stock not updating after doing MIGO (gr) for third party sales

    i am doing third party sales, after creating PO with PR and updating stock through Migo , i am not able find the stock, but i can see through MB51 only , i am see the stock through MMBE or MB52

    Dear friend
    Hope you are clear about third party process
    In  third party process vndor supplies the goods directly to customer and the goods does not come to our premises at all
    In many of the scenarios that i have seen there is no MIGO itself done
    To have MIGO is purely optional in third party
    I am enclosing here with the threads which were discussed on the same
    Forum post in ERP - Sales and Distribution (SD) General: MIGO- why we do it in third party sales?
    MIGO- why we do it in third party sales?
    Forum post in ERP - Sales and Distribution (SD) General: Why MIGO is required in thirdparty scenarion?
    Why MIGO is required in thirdparty scenarion?
    The stock updation after MIGO is posted directly to consumption account and we dont keep the stock
    So it is not seen in MMBE or MB52 (which is a physical inventory orstock report)
    The stock is not there? How can you see that ?
    If still you want to see the stocks this is entirely against business logics and consult with your MM and FI colleagues (as this query is their area of operation)
    If the third party process is happening with item category TAB then stock updation will take place after MIGO and you can see the same in MMBE/MB52
    If not happening means there is some customization error with the PO from MM side Check with MM colleague
    Make sure if the item category is TAB then schedule line category is CB
    In VOV6 for schedulle line category CB
    NB is the order type
    0 is the item category
    E is the account assignment category
    Regards
    Raja

  • Reverse goods receipt after invoice posted

    Hi experts,
    I have a PO that was goods receipted and invoiced receipted (work was done). Someone has then un-goods receipted the PO, and now that entry needs to be reverse (the work order has status closed).
    What would be the way to fix this? Re-open the work order? Is it OK that the goods receipted may be reversed after invoice receipted.. i.e. after an invoice has been posted?
    I am starting to get familiar with this, so bear with me.
    Regards,
    Andres.

    Andres,
    First check whether the PR/PO has been created within the workorder at Operation level or it is created outside the work order and just the account assignment in the PR/PO has been done to the workorder.
    Since PO is the superior purchasing document and preceeds the PR , standard application dont have any dependancy between PO and work order..Dependency stops at PR release and when Quotation/PO has been created and released..So i dont think u need to undo TECO...
    For any reversal of the material documents after posting, subsequent Fi document should be revresed only then reverse Goods movement becomes effective as it needs to update the stock levels and inventory value in the systemm.
    However u need to check the way system has been configured and Mapped...
    For better response please post this question in MM---Inventory management forum.....
    If u r satisfied with this answer please close and rate..
    Thanks,
    Shaikh Murad....

  • CC app manager update  failed with error code 50 after reaching about 35%

    Trying to update the CC app manager. The update is always very slow  (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?

    Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks.  I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
    The user suggested fix that worked for me was:
    1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
    2) Started the creative cloud desktop app.
    3) The app said it needed to be updated. I hit the update button.
    4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
    5) Restarted computer in normal mode.
    6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
    So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time.

  • Invoice posting not permissible after posting MIGO

    Dear Experts
    I don't want to make MIGO ( Goods Receipt ) after making Invoice (MIRO) date.
    Suggest me steps for the same.
    Regards
    viral.

    Hi Viral,
    You need to incorporate the logic of "System should not allow while doing the MIRO before the Posting date of GRN posting date in the enhancement"
    The logic is to take the GR document number from the table DRSEG-LFBNR - Document No. of a Reference Document,  retreive the GR posting date from table MKPF, compare the same with the Invoice Posting date. if the invoicing posting date is smaller than the GR posting date then give the error message as "System should not allow while doing the MIRO before the Posting date of GRN posting date" if it is not then no message.This will be applicable only if GR-Based IV is flagged in the PO line item or else the invoices without GR's will not be posted.
    You will need an ABAPer to develop the same in the sytem.
    U may write the above code in
    Exit Function Module : EXIT_SAPLMRMP_010
    Include : ZXM08U16
    Regards,
    Kiran

  • Wrong Vendor Invoice Posting Due To Wrong Excise Tax Code

    Hi:
    We have created a Purchase Order as per below:
    Qty     10
    Price     100
    Value     1000
    Excsie 10%     0
    Cess     0
    SECess     0
    Value+Excise     1000
    VAT 5%     50
    ValueExciseVAT     1050
    (Please note that the PO was to be created in the following fashion as the Material was excisable)
    Qty     10
    Price     100
    Value     1000
    Excsie 10%     100
    Cess     2
    SECess     1
    Value+Excise     1103
    VAT 5%     55.15
    ValueExciseVAT     1158.15
    We did the Goods Receipt and the FI Document is as follows:
    24340000     Paper Stock     BSX     1,000.00
    13110100     GR/IR-ext proc     WRX     1,000.00-
    We did the Vendor Invoice Posting as follows:
    100183     SIEGWERK INDIA PVT LTD (SICPA)     KBS     1,050.00-
    13110100     GR/IR-ext proc     WRX     1,000.00
    24638100     VAT Recoverable     JP5     50.00
    The Material was issued to Cost Centre
    Later at the time of Excise Invoice posting, we came to know that the Tax Code in the Purchase Order was wrong. Here in our case, we have created separate Tax Code based on Excise Percentage. For example, V1 for VAT 5%, E1 for VAT %+Excise 10.3%.
    To post the excise invoice, we changed the Tax Code in the Purchase Order and did the Excise Posting as follows:
    24820020     CENVAT Inp SHEcess     1.00
    24820000     CENVAT Inp BED     100.00
    24820010     CENVAT InpEcess     2.00
    13113920     CENVAT clearing     103.00-
    My Question:
    a. Is this the correct way?
    b. What about the following FI Entries which got generated when we do the MIRO with actual Tax Code:
    100183     SIEGWERK INDIA PVT LTD (SICPA)     KBS     1,158.15-
    13110100     GR/IR-ext proc     WRX     1,000.00
    13113920     CENVAT clearing     JI1     100.00
    13113920     CENVAT clearing     VS9     2.00
    13113920     CENVAT clearing     JI6     1.00
    24638100     VAT Recoverable     JP5     55.15
    Please guide.
    Regards,

    Thanks Sanjoo for the reply.
    Here my worry is the all the postings have been made in SAP in Production Client.
    The User has already done the postings for MIRO & J1IEX without informing to us, and the volume of transactions is huge.
    We are in the back-log mode and at this stage, we can't go for any reversal . I am Just exploring the alternatives.
    Our MM & FI Users are little bit smart, when ever they do some mistake, they simply say "we will pass a JV" and we are not able to educate them that the JV is not a Solution. Please guide.
    Regards,
    PK

  • Error 'No tax code found for difference' in Posting Vendor Invoice IDOC

    Hi All,
    I am getting error message 'No tax code found for difference' while posting Vendor Invoice IDOC into SAP. IDOC type is INVOIC02. There is no difference in PO price, Invoice price and even Standard price. then why this  error message? Other Vendor EDI settings are done ( OBCA, OBCD, OBCE etc). Is there any thing specific to be done in the config for this error?
    IDOC has PO  as reference document.
    I looked into several threads in SDN forum but could not find proper solution
    Can any ine help me with this issue?
    Thanks in advance
    Hari

    Hi
    You might be  missing the tax code for uploding through IDOC
    so you can use the t.code we02 and give the doc and find the error
    go to the WE19 to edit the tax  code
    and USE the t.code  BD87  to select the doc and process it
    thanks
    Madhu

Maybe you are looking for