Propagation is not working

Hi,
We're using Asynchronous cache group for a particular table in TimesTen.
Associated oracle table contains several records. When we create a cache group in TT, it gets created successfully. But data inside oracle table is not propagated from oracle to TT.
We've alredy executed ttcachestart() and ttrepstart()....
Any suggestions for the same?

Asynchronous Write-Through (AWT) cache groups are intended for the updates to occur in TimesTen and the committed transactions asynchronously propagated to the Oracle database. Essentially, TimesTen is the master for the cache AWT tables.
If you want updates from the Oracle Database to be refreshed to the cache table in TimesTen, you should be using read-only cache group with autorefresh, where updates from the Oracle database are tracked and refreshed incrementally at the autorefresh interval you specified.
You can have readonly cache groups and updateable cache groups caching different tables.
It is not a good practice to allow updates to the cache in TimesTen and updates to the same tables in the Oracle database.
Susan

Similar Messages

Unscheduling propagation does not work.

When I try to unschedule the propagation, it does not work. I tried as following command:
exec DBMS_AQADM.UNSCHEDULE_PROPAGATION(queue_name => 'TEST_Q1',
destination => 'dbpm.phonon');
So I tried to shutdown the job_queue_process, but it did not performed correctly. I used the command of
alter system set job_queue_processes = 0;
But the snp process did not killed even if the parameter was changed '0' value.
RDBMS version is Oracle8i (8.1.6.3.0) and Platform is SunOS.
Could you give me advice?
Thanks in advance,
Phyllis

Thanks for your reply in advance.
As a result, there's no any error messages.
I tried to unschedule the AQ queueing propagation schedule via
exec dbms_aqadm.unschedule_propagation. It appeared to hang
(nothing response so long time). So hit the key <CTRL-C>.
And I reattempted the previous process. But I haven't got any
message. There's no response even if I attemped it for several
times.

Propagation does not work.

Destination
"STRMADMIN"."STREAMS_CAPTURE_Q"@SATURN.NET
ORA-12170: TNS:Connect timeout occurred
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 1087
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 7616
ORA-06512: at "SYS.DBMS_AQADM", line 631
ORA-06512: at line 1
What I should do?

In source database,
SQL> select destination_dblink,error_message,status,SOURCE_QUEUE_OWNER so ,DESTINATION_QUEUE_OWNER des from dba_propagation;
Database
Link       Error Message                                      Status   SO                             DES
SATURN.NET ORA-12170: TNS:Connect timeout occurred            ENABLED STRMADMIN                      STRMADMIN
           ORA-06512: at "SYS.DBMS_AQADM_SYS", line 1087
           ORA-06512: at "SYS.DBMS_AQADM_SYS", line 7616
           ORA-06512: at "SYS.DBMS_AQADM", line 631
           ORA-06512: at line 1
SQL> select owner,db_link from dba_db_links;
Owner      DB_LINK
STRMADMIN SATURN.NET
SQL> select count(username) from [email protected];
COUNT(USERNAME)
             28Why connecttion timeout happens

Message Propagation within DB not working

Hi,
I am just following steps as depicted in reference manuals, to implement multiple consumer queue. What I found was even though I am enabling propagation message is not trnasferring to another queue.
Can anybody suggest way of working out this.
regards
Navneet

Hi,
There can be many reasons why messages are not getting propagated. First make sure you have atleast 2 job queue processes (init.ora parameter - job_queue_processes).
Check the log directory to see if you have any snapshot trace files. That should give you more info on why propagation is not happening.

SSO not working when launching the InfoView application

We are so close to implementing SSO for BO Edge 3.0 using AD and Kerberos. We can logon to InfoView and CMC using AD authenication and it works fine. When turning on SSO:
    <context-param>
        <param-name>sso.enabled</param-name>
        <param-value>true</param-value>
    </context-param>
in the InfoViewApp web.xml it fails with an error message in the Tomcat stdout.log
Debug is true storeKey false useTicketCache false useKeyTab false doNotPrompt false ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
+          [Krb5LoginModule] user entered username: "at"MYCOMPANY.COM+
User name is missing.
When done through the application logon screen and able to logon it is
Debug is true storeKey false useTicketCache false useKeyTab false doNotPrompt false ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
+          [Krb5LoginModule] user entered username: dennis"at"MYCOMPANY.COM+
The username appears in the log file followed by the debug message for Kerberos key being created.
I am so close, does anyone have an idea?

Hi Tim,
The Vintela SSO document for BOE XI 3.1 is very comprehensive, but it has not resolved my issue.
Under NTLM option I SSO works great with .NET InfoView as long as I have the web site authentication set to Windows Authentication and ASP .NET Authentication enabled. Once the ASP .NET is disabled, SSO does not work.
When using the Kerberos option, .NET InfoView SSO does not work due to the error 'propagating the security context between the security server and the client'.
The Java InfoView SSO does not work either, but I can enter my user credentials and logon fine.
std.out error:
Debug is true storeKey false useTicketCache false useKeyTab false doNotPrompt false ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
          [Krb5LoginModule] user entered username: @OR.PROVIDENCE.ORG
Acquire TGT using AS Exchange
          [Krb5LoginModule] authentication failed
Generic error (description in e-text) (60)
No user name is being passed. I've been through a multitude of documents and forums ensuring settings are correct and I believe they are including no duplicate SPN's.
The only issue on the server is that I cannot open the tomcat confi app. due to it not able to start service BOE120Tomcat. I was able to update the registry with the info for the bsclogin.config and krb5.ini. I was not able to find anything on getting that service started.
Any ideas? Need more info? I have a bunch.
Thanks and have fun,
Phil

Jms is not working properly in clustered environment

Hi all,
i am using the application server oc4j 10.1.3.1.0 enterprise edition . my application is standalone application(thick client)
we are using the jndi.properties as follows ...
java.naming.factory.initial=com.evermind.server.rmi.RMIInitialContextFactory
java.naming.provider.url=opmn:ormi://172.16.1.38:6005:group/Security,opmn:ormi://172.16.1.38:6006:deceval_group/Security
java.naming.security.principal=oc4juser
java.naming.security.credentials=oc4juser
oracle.j2ee.rmi.loadBalance=lookup
we have two application servers in cluster topology as u can see above we have used one instance from one application server and one from another.
i have seen that for every instance there one jms server. at runtime it is taking one application servers services
say opmn port 6005 but when the application is connecting to the another application server say opmn 6006
here jms is not working properly when i send message
As we have clustered environment message must be propagated all the applications who use above jndi.properties.
if i keep use only one application server opmn say
java.naming.provider.url=opmn:ormi://172.16.1.38:6005:group/Security
then its is working excellently
please can u provide any solution ASAP
thanks in advance
Manu

Dear Aravindth
(.*?) means -> Select all contents from where you start and end,
For Ex. <month>(.*?)</month> then Select for start <month> and end last </month> tag.
(?) Match zero or one occurrences. Equivalent to {0,1}.
(*) Match zero or more occurrences. Equivalent to {0,}.
(+) Match one or more occurrences. Equivalent to {1,}.
(.) (Dot). Match any character except newline or another Unicode line terminator.
(.*?) means -> Zero or more times Match any character except newline or another Unicode line terminator + Match zero or more occurrences. Equivalent to {0,}.+Match zero or one occurrences. Equivalent to {0,1}.
Could you please refere the below cite :
http://www.javascriptkit.com/jsref/regexp.shtml
Thanks & Regards
T.R.Harihara SudhaN

Custom DB authentication to an application from Oracle Portal not working.

Hi All,
We have a Portal customized and integrated to LDAP for SSO.
From the portal, we have a link that takes to another custom application that requires another level of authentication. We have implemented this authentication as custom Database based authentication.
When user login to the portal and access this link, he will be directed for authentication again. This custom application has been installed on a different OC4J instance while Oracle Portal is running in a different OC4J instance.
Issue is though user details are being propagated to the custom application page, we are receiving an error saying authentication failed.
In the OC4J instance specific for this custom application, we have configured jazn.xml to use custom authentication.
Below is the code:
<?xml version = '1.0' encoding = 'UTF-8' standalone = 'yes'?>
<!DOCTYPE jazn PUBLIC "JAZN Config" "http://xmlns.oracle.com/ias/dtds/jazn-9_04.dtd">
<jazn provider="XML" location="./jazn-data.xml" default-realm="jazn.com">
<property name="role.mapping.dynamic" value="true"/>
<property name="custom.loginmodule.provider" value="true"/>
</jazn>
and in jazn-data.xml, we gave the role mapping.
But the problem is when the link to the custom application is accessed, it seems like the custom autentication mechanism is not working.
Can anyone throw light on this?
Do we need to give the same configuration in the j2ee/home/config directory files also?
Can we use both LDAP and custom DB authentication with in the same OAS setup. Remember as of now, Portal and custom application are running in different OC4J instances but within the same OAS.
Any help in this regard will be highely appreciated.
Thanks,
Sasi Bhushan

Hi All,
We have a Portal customized and integrated to LDAP for SSO.
From the portal, we have a link that takes to another custom application that requires another level of authentication. We have implemented this authentication as custom Database based authentication.
When user login to the portal and access this link, he will be directed for authentication again. This custom application has been installed on a different OC4J instance while Oracle Portal is running in a different OC4J instance.
Issue is though user details are being propagated to the custom application page, we are receiving an error saying authentication failed.
In the OC4J instance specific for this custom application, we have configured jazn.xml to use custom authentication.
Below is the code:
<?xml version = '1.0' encoding = 'UTF-8' standalone = 'yes'?>
<!DOCTYPE jazn PUBLIC "JAZN Config" "http://xmlns.oracle.com/ias/dtds/jazn-9_04.dtd">
<jazn provider="XML" location="./jazn-data.xml" default-realm="jazn.com">
<property name="role.mapping.dynamic" value="true"/>
<property name="custom.loginmodule.provider" value="true"/>
</jazn>
and in jazn-data.xml, we gave the role mapping.
But the problem is when the link to the custom application is accessed, it seems like the custom autentication mechanism is not working.
Can anyone throw light on this?
Do we need to give the same configuration in the j2ee/home/config directory files also?
Can we use both LDAP and custom DB authentication with in the same OAS setup. Remember as of now, Portal and custom application are running in different OC4J instances but within the same OAS.
Any help in this regard will be highely appreciated.
Thanks,
Sasi Bhushan

RBS maintainance job Orphan cleanup not working

The problem are that Orphan cleanup won't start up. He starting up. chekcking pools and always stuck on 5 pool. And can delete other pool data.
The command I'm runing:
> C: cd "C:\Program Files\Microsoft SQL Remote Blob Storage
> 10.50\Maintainer" "Microsoft.Data.SqlRemoteBlobs.Maintainer.exe" -ConnectionStringName RBSMaintainerConnection -Operation GarbageCollection ConsistencyCheck ConsistencyCheckForStores
> -GarbageCollectionPhases rdo -ConsistencyCheckMode r >> SIS_RBS_NOTIME_Maintainer%date%.log
The Error I'm getting:
This task has ended. Processed 334 work units total. 0 Work units were incomplete. Needed to delete 1606751 blobs. Succeeded in deleting 1606751 blobs, 0 blobs were not found in the blob store.
Starting Orphan Cleanup.
Starting Orphan Cleanup for pool <PoolId 25, BlobStoreId 1, StorePoolId 0x19000000>.
Skipping the current unit of work because of an error. For more information, see the RBS Maintainer log.
Starting Orphan Cleanup for pool <PoolId 270, BlobStoreId 1, StorePoolId 0x0e010000>.
Skipping the current unit of work because of an error. For more information, see the RBS Maintainer log.
Starting Orphan Cleanup for pool <PoolId 94, BlobStoreId 1, StorePoolId 0x5e000000>.
Skipping the current unit of work because of an error. For more information, see the RBS Maintainer log.
Starting Orphan Cleanup for pool <PoolId 122, BlobStoreId 1, StorePoolId 0x7a000000>.
Skipping the current unit of work because of an error. For more information, see the RBS Maintainer log.
Starting Orphan Cleanup for pool <PoolId 154, BlobStoreId 1, StorePoolId 0x9a000000>.
Skipping the current unit of work because of an error. For more information, see the RBS Maintainer log.
No work is available at this time.
Other clients, processes or threads may be currently working on other tasks.
This task has ended. Processed 6 work units total. 5 Work units were incomplete. Needed to delete 0 blobs. Succeeded in deleting 0 blobs, 0 blobs were not found in the blob store. Enumerated 0 blobs, 0 blobs are being considered for orphan cleanup.
This task has ended.
The Event viewer shows:
Message ID:2, Level:ERR , Process:8244, Thread:1
Skipping the current unit of work because of an error. For more information, see the RBS Maintainer log.
Operation: WorkExecute
BlobStoreId: 0
Log Time: 2015.02.04 23:43:47
Message ID:3, Level:ERR , Process:8244, Thread:1
Skipping unit of work <PoolId 25, BlobStoreId 1, StorePoolId 0x19000000> because of an error. For more information, see the RBS Maintainer log.
Operation: WorkExecute
BlobStoreId: 0
Log Time: 2015.02.04 23:43:47
Exception: System.Data.SqlClient.SqlException: The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION.
Internal error in RBS. rbs_sp_gc_get_slice did not find any work unit.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Data.SqlRemoteBlobs.SqlOperations.ExecuteNonQuery(RemoteBlobCommand commandObject, SqlCommand command)
at Microsoft.Data.SqlRemoteBlobs.Maintainer.BeginEnumerateCommand.ExecuteDatabaseOperation2()
at Microsoft.Data.SqlRemoteBlobs.RemoteBlobCommand.ExecuteInternal()
at Microsoft.Data.SqlRemoteBlobs.RemoteBlobCommand.Execute()
at Microsoft.Data.SqlRemoteBlobs.Maintainer.OrphanCleanup.ProcessPoolOrSlice(Int32 nestingDepth, SqlRemoteBlobContext context, BlobDetails blobDetails, Request parentRequest)
at Microsoft.Data.SqlRemoteBlobs.Maintainer.WorkExecutor.ExecutePool(Int32 nestingDepth, SqlRemoteBlobContext context)
at Microsoft.Data.SqlRemoteBlobs.Maintainer.OrphanCleanup.ProcessWorkUnit(Int32 nestingDepth, SqlRemoteBlobContext context)
at Microsoft.Data.SqlRemoteBlobs.Maintainer.WorkExecutor.Execute(Int32 nestingDepth)
Also in database for those pools the work_state = 20. To other pools work_state = 30.
Are its possible to repair or just skip that pools to clean up the database?

One more problem.
First starting Reference scan:
Reference Scan is complete for this database.
Scanned 39623 blobs. Deleted 163 blobs in the range of 0x000000000437ff8a00000001(exclusive) to 0x0000000004389a5100000001(inclusive).
This task has ended. Processed 619 work units total. 0 Work units were incomplete.
Second is Starting Delete Propagation:
Delete Propagation complete for pool <PoolId 256, BlobStoreId 1, StorePoolId 0xff000000>.
0 Delete for 0 blobs attempted, 0 blobs were deleted. 0 blobs were not found in the blob store. For more information, see the RBS Maintainer log.
Delete Propagation is complete for this database.
This task has ended. Processed 355 work units total. 0 Work units were incomplete. Needed to delete 280542 blobs. Succeeded in deleting 280542 blobs, 0 blobs were not found in the blob store.
Third one is Orphan Cleanup:
Starting Orphan Cleanup.
Starting Orphan Cleanup for pool <PoolId 354, BlobStoreId 1, StorePoolId 0x62010000>.
Enumerated 172683 blobs, 172683 blobs are being considered for orphan cleanup.
Orphan Cleanup complete for pool <PoolId 354, BlobStoreId 1, StorePoolId 0x62010000>.
0 Delete for 0 blobs attempted, 0 blobs were deleted. 0 blobs were not found in the blob store. For more information, see the RBS Maintainer log.
Starting Orphan Cleanup for pool <PoolId 355, BlobStoreId 1, StorePoolId 0x63010000>.
Enumerated 15124 blobs, 15124 blobs are being considered for orphan cleanup.
Orphan Cleanup complete for pool <PoolId 355, BlobStoreId 1, StorePoolId 0x63010000>.
0 Delete for 0 blobs attempted, 0 blobs were deleted. 0 blobs were not found in the blob store. For more information, see the RBS Maintainer log.
Orphan Cleanup is complete for this database.
This task has ended. Processed 2 work units total. 0 Work units were incomplete. Needed to delete 0 blobs. Succeeded in deleting 0 blobs, 0 blobs were not found in the blob store. Enumerated 187807 blobs, 187807 blobs are being considered for orphan cleanup.
This task has ended.
Starting RBS consistency check with attempt to repair.
No RBS consistency issues found.
Consistency check completed.
Initializing consistency check for stores.
Starting basic consistency check on blob store <1:FilestreamProvider_1>.
Consistency check on blob store <FilestreamProvider_1> returned <Success>.
This task has ended.
The problem is that Orphan cleanup cleaning just 2 pool's. At all I have 354 pools. Why orphan not cleaning all pools?
I have a 4TB of data with RBS which is 2,5 TB real data and 1,5 TB need to be deleted with RBS, but RBS not working.
Database recovery model is Simple. After each RBS maitenance I'm running in database SQL Command: checkpoint; and still all files is remaining in filesystem.
RBS config:
config_key config_value
blob_store_operation_retry_attempts 3
column_config_version 1
column_config_version_of_gc_view 1
complete_delete_propagation_start_time 2015-02-26T19:59:19.357
complete_orphan_cleanup_start_time 2015-02-26T19:59:22.343
complete_reference_scan_start_time 2015-02-26T19:47:08.507
configuration_check_period time 00:00:00
db_config_version 11
default_blob_store_name FilestreamProvider_1
delete_propagation_compatibility_level 105
delete_propagation_end_time 2015-02-26T19:59:22.337
delete_propagation_in_progress false
delete_propagation_start_time 2015-02-26T19:59:19.357
delete_scan_period time 00:00:00
disable_pool_slicing false
garbage_collection_slice_duration days 7
garbage_collection_time_window time 00:00:00
gcd_num_blobs_per_iteration 1000
gcd_work_unit_keep_alive_time time 00:10:00
gco_enum_num_blobs_per_iteration 1000
gco_num_blobs_per_iteration 1000
gco_work_unit_keep_alive_time time 00:10:00
gcr_num_blobs_per_iteration 1000
gcr_num_blobs_per_work_unit 100000
gcr_work_unit_keep_alive_time time 00:02:00
history_table_max_size 10000
history_table_trim_size 1000
index_reorganize_min_fragmentation 10
index_reorganize_min_page_count 10000
maintain_blob_id_compatibility false
max_consistency_issues_found 1000
max_consistency_issues_returned 100
min_client_library_version_required 10.0.0.0
min_client_library_version_supported 10.0.0.0
orphan_cleanup_compatibility_level 105
orphan_cleanup_end_time 2015-02-26T19:59:22.610
orphan_cleanup_in_progress false
orphan_cleanup_start_time 2015-02-26T19:59:22.343
orphan_scan_period time 00:00:00
rbs_filegroup PRIMARY
rbs_schema_version 10.50.0.0
reference_scan_compatibility_level 105
reference_scan_end_time 2015-02-26T19:59:19.320
reference_scan_in_progress true
reference_scan_start_time 2015-02-27T07:02:45.193
set_trust_server_certificate true
set_xact_abort false

Propagate wsseHeaders not working

Hi,
In a BPEL 10131 process I call a Web Service that is secured via OWSM. The secured service including OWSM policies works fine.
In order to call the secured service from the BPEL process I want to propagate to the secured service the security credentials that were passed to the BPEL process. In line with the BPEL Admin guide, I specify the following property for the secured partner link:
<property name="wsseHeaders">propagate</property>
This does not work. Specifying the additional property:
<property name="wsseOASIS2004Compliant">true</property>
does not make a difference.
When I 'hard code' the credentials like this:
<property name="wsseHeaders">credentials</property>
<property name="wsseUsername">un</property>
<property name="wssePassword">pw</property>
everything works like a charm.
Has anyone seen this before? I suspect a bug in the product for propagation of the credentials.
BTW: I already tried substituting wsseHeaders with basicHeaders and being desperate, have also tried httpBasicHeaders. No luck.
Help appreciated.
Thx, Sjoerd

Hi Rajesh,
No, I have not checked this with basicHeaders. Your best option is to log a Service Request through Metalink. If patches are available to fix your problem (there are close to 100 BPEL patches right now, many people anxiously await the 10.1.3.3 patch set ;-)) Oracle Support should be able to tell you straight away.
Best of luck.
Hth, Sjoerd

Remote Desktop not working on client after crash

I was installing the ARD Client along with some other OS upgrades on two client computers. My main ARD console was busy copying some files so I set up ARD to install the pkgs via the task server on another Mac. During the install my main ARD console crashed. Now the clients show up with the status that Screen sharing is allowed but they show the old version of the ARD client is installed. I manually installed the new ARD client but it still shows up on my console as the old version. Sometimes I can connect to the clients and sometimes I cannot. I can't do anything other than screen sharing and that is not working well either. I went to the client computer and stopped and started ARD through system preferences. When that didn't work I used the terminal command to kickstart ARD on the client. No change on the admin side. I've also noticed when I am able to connect to the client that it is constantly reconnecting to it like it is dropping the connection. I ran Activity monitor on the client and ARDAgent shows up there but keeps disappearing like its starting and stopping on its own. Has anyone had anything similar happen to them?

When I looked in this folder, I saw the "Client" folder with the red "no access" icon on it. I did a GetInfo and changed the permissions for this folder to include Administrators with read/write (why it wasn't already like this as I was logged into the server through ARD as admin [server is headless], I'll never know).
I propagated this perm changes down through the folder's children and all seems well. Its likely that because of the access issue, ARD could not initiate any connections (vnc://serverIP did not work either initially).
YMMV.

Distributed transactions across RMI-IIOP client to RMI-IIOP server do not work

Hi,
          Based on the links below:
          http://e-docs.bea.com/wls/docs61/jta/trxrmi.html#1018506
          http://e-docs.bea.com/wls/docs61/jta/gstrx.html#1067532
          It appears that is possible to have distributed transactions across RMI-IIOP
          clients and RMI-IIOP applications (servers).
          I followed up the "Transactions Sample RMI Code" section but it appears that
          the transaction context is not propagated from client to server. I am also
          surprised by the note:
          Note: These code fragments do not derive from any of the sample applications
          that ship with WebLogic Server. They merely illustrate the use of the
          UserTransaction object within an RMI application.
          The above note suggests that there is no sample code available.
          Is there anyone who successfully had RMI-IIOP applications (servers)
          participating in distributed transactions?
          Is there any sample code that illustrates RMI-IIOP applications (servers)
          participating in distributed transactions?
          If anyone thinks that this should work I will post my code that does not
          work.
          Regards,
          Dan Cimpoesu


But if you look to the diagram:
http://e-docs.bea.com/wls/docs61/jta/gstrx.html#1040200
it suggests that transactional context is passed from clients to RMI-IIOP
servers.
Am I wrong?
Dan
"Andy Piper" <[email protected]> wrote in message
news:[email protected]..
"Dan Cimpoesu" <[email protected]> writes:
Transactions over IIOP are not supported or implemented in WLS 6.1 or
previous. This is a feature of WLS 7.0. In 7.0 we implement OTS.
andy
Hi,
Based on the links below:
http://e-docs.bea.com/wls/docs61/jta/trxrmi.html#1018506
http://e-docs.bea.com/wls/docs61/jta/gstrx.html#1067532
It appears that is possible to have distributed transactions across
RMI-IIOP
clients and RMI-IIOP applications (servers).
I followed up the "Transactions Sample RMI Code" section but it appearsthat
the transaction context is not propagated from client to server. I amalso
surprised by the note:
Note: These code fragments do not derive from any of the sampleapplications
that ship with WebLogic Server. They merely illustrate the use of the
UserTransaction object within an RMI application.
The above note suggests that there is no sample code available.
Is there anyone who successfully had RMI-IIOP applications (servers)
participating in distributed transactions?
Is there any sample code that illustrates RMI-IIOP applications(servers)
participating in distributed transactions?
If anyone thinks that this should work I will post my code that does not
work.
Regards,
Dan Cimpoesu

Distributed transactions across RMI-IIOP client to server do not work

Hi,
Based on the links below:
http://e-docs.bea.com/wls/docs61/jta/trxrmi.html#1018506
http://e-docs.bea.com/wls/docs61/jta/gstrx.html#1067532
It appears that is possible to have distributed transactions across RMI-IIOP
clients and RMI-IIOP applications (servers).
I followed up the "Transactions Sample RMI Code" section but it appears that
the transaction context is not propagated from client to server. I am also
surprised by the note:
Note: These code fragments do not derive from any of the sample applications
that ship with WebLogic Server. They merely illustrate the use of the
UserTransaction object within an RMI application.
The above note suggests that there is no sample code available.
Is there anyone who successfully had RMI-IIOP applications (servers)
participating in distributed transactions?
Is there any sample code that illustrates RMI-IIOP applications (servers)
participating in distributed transactions?
If anyone thinks that this should work I will post my code that does not
work.
Regards,
Dan Cimpoesu

But if you look to the diagram:
http://e-docs.bea.com/wls/docs61/jta/gstrx.html#1040200
it suggests that transactional context is passed from clients to RMI-IIOP
servers.
Am I wrong?
Dan
"Andy Piper" <[email protected]> wrote in message
news:[email protected]..
"Dan Cimpoesu" <[email protected]> writes:
Transactions over IIOP are not supported or implemented in WLS 6.1 or
previous. This is a feature of WLS 7.0. In 7.0 we implement OTS.
andy
Hi,
Based on the links below:
http://e-docs.bea.com/wls/docs61/jta/trxrmi.html#1018506
http://e-docs.bea.com/wls/docs61/jta/gstrx.html#1067532
It appears that is possible to have distributed transactions across
RMI-IIOP
clients and RMI-IIOP applications (servers).
I followed up the "Transactions Sample RMI Code" section but it appearsthat
the transaction context is not propagated from client to server. I amalso
surprised by the note:
Note: These code fragments do not derive from any of the sampleapplications
that ship with WebLogic Server. They merely illustrate the use of the
UserTransaction object within an RMI application.
The above note suggests that there is no sample code available.
Is there anyone who successfully had RMI-IIOP applications (servers)
participating in distributed transactions?
Is there any sample code that illustrates RMI-IIOP applications(servers)
participating in distributed transactions?
If anyone thinks that this should work I will post my code that does not
work.
Regards,
Dan Cimpoesu

Spotlight Not Working on Xserve with Large Storage

We're using Xserve (Mac OS X Server 10.6.7) with ~6TB storage as our AFP fileserver. The spotlight searching is not working well, neither at the server console nor client side.
I have tried rebuid the spotlight index with the following commands,
sudo mdutil -i on /
rm -rf /.Spotlight*
sudo mdutil -E /
The spotlight engine seems working. But we can't find things accuractly. It seems that we can find things in the past but not the ones recently added to the server. We have clients from 10.4.11 to 10.6.7, and there is no luck for all.
Does spotlight has storage size limit?
Thank you!

Same fundemental issue here. Config a little diff: Serve 10.5.8 with 5 shares from a mirrored RAID. mix of 10.4.11 and 10.5.8 desks. Of all the shares the find problem exists on ONLY ONE SHARE.
One 10.4.11 system can execute find successfully, while all 10.5.8 and one 10.4.11 do not. Some days all systems return results successfully.
Weird observation 1: CONSOLE sometimes does not display contents of unsearchable volume even though user (admin) has RWE to that share.
Shell into 10.5.8 toggle mdutil against the problematic mounted volume does not resolve the problem. Add/removing volume via Spotlight security does not resolve the problem. Tried rm .Spotlight-V100 from workstation command line does not resolve the problem. Tried rm .Spotlight-V100 from console command line does not resolve the problem.
Weird observation 2: All users same group with RWE set and custom ACL. Privs have been propagated recursively. Correct user and group have ownership to .Spotlight so it's not an issue of write failure while indexing.
An identifiable pattern of failure remains elusive.

BPEL invocation securely from client using JAZN security not working.

HI,
We are trying to invoke the BPEL process securely from the client application using JAZN security settings, this is not working, with any credentilas or with out providing the security credentilas BPEL invocation is happening. Need the solution for this security credentials while invoking the BPEL process.
Please provide the update at the earliest. Thanks in advance. Your quick update is greatly appreciated.

Hi James,
Thanks for the update.
Please find the attached docs.
Bpel.xml:
<?xml version = '1.0' encoding = 'UTF-8'?>
<BPELSuitcase>
<BPELProcess id="HelloWorld" src="HelloWorld.bpel">
<partnerLinkBindings>
<partnerLinkBinding name="client">
<property name="wsdlLocation">HelloWorld.wsdl</property>
</partnerLinkBinding>
</partnerLinkBindings>
<configurations>
<property name="role">oc4j-administrators</property>
</configurations>
</BPELProcess>
</BPELSuitcase>
orion-application.xml: folder location: C:\product1\10.1.3.1\OracleAS_1\j2ee\home\applications\orabpel\META-INF\orion-application.xml
<?xml version="1.0"?>
<orion-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/orion-application-10_0.xsd"
schema-major-version="10"
schema-minor-version="0" component-classification="internal-BPEL">
<connectors path="./oc4j-connectors.xml"/>
     <ejb-module remote="false" path="ejb_ob_engine.jar" />
     <ejb-module remote="false" path="ejb_services.jar" />
     <web-module id="httpbinding" path="httpbinding.war" />
     <web-module id="admin_war" path="admin_war" />
     <web-module id="startup_war" path="startup_war" />
     <web-module id="console_war" path="console_war" />
     <persistence path="persistence" />
     <principals path="principals.xml" />
     <jazn provider="XML" location="../../config/system-jazn-data.xml" jaas-mode="doAsPrivileged">
     
</jazn>
<imported-shared-libraries>
     <inherited-shared-libraries/>
     <import-shared-library name="oracle.bpel.common" parent="api" />
     <import-shared-library name="oracle.ws.client" parent="oracle.ws.jaxrpc" version="10.1.3" />
     <import-shared-library name="oracle.ws.jaxrpc" />
     <import-shared-library name="oracle.toplink" />
     <import-shared-library name="oracle.ws.testpage" />
     </imported-shared-libraries>
     <log>
          <file path="application.log" />
     </log>
     <namespace-access>
          <read-access>
               <namespace-resource root="">
                    <security-role-mapping name="oc4j-administrators">
                         <group name="oc4j-administrators" />
                    </security-role-mapping>
               </namespace-resource>
          </read-access>
          <write-access>
               <namespace-resource root="">
                    <security-role-mapping name="oc4j-administrators">
                         <group name="oc4j-administrators" />
                    </security-role-mapping>
               </namespace-resource>
          </write-access>
     </namespace-access>
     <security-role-mapping name="PUBLIC">
          <group name="{{PUBLIC}}" />
     </security-role-mapping>
</orion-application>
web.xml file: C:\product1\10.1.3.1\OracleAS_1\j2ee\home\applications\orabpel\startup\WEB-INF\web.xml
<?xml version="1.0" ?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app id="StartupWebApp_Id">

<servlet id="BPEL_OC4J_Servlet_Id">
<servlet-name>BPEL_OC4J_Servlet</servlet-name>
<display-name>BPEL OC4J JAX/RPC Servlet</display-name>
<description>BPEL endpoint Provider Port via oc4j jax/rpc</description>
<servlet-class>com.collaxa.cube.ws.soap.oc4j.BPELOC4JServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet id="LoaderServlet_Id">
<servlet-name>cxloader</servlet-name>
<servlet-class>com.collaxa.cube.admin.CXLoaderServlet</servlet-class>
<load-on-startup>3</load-on-startup>
</servlet>
     
<servlet-mapping id="BPEL_OC4J_Servlet_Mapping_Id">
<servlet-name>BPEL_OC4J_Servlet</servlet-name>
<url-pattern>/*</url-pattern>
</servlet-mapping>
<security-constraint>
     <web-resource-collection>
          <web-resource-name>Default Domain Pages</web-resource-name>
          <description>These pages are only accessible by authenticated users.</description>
          <url-pattern>*orabpel/default/HelloWorld/v2010_05_02__62961</url-pattern>
     </web-resource-collection>
     <auth-constraint>
     <role-name>oc4j-administrators</role-name>
     </auth-constraint>
</security-constraint>
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>jazn.com</realm-name>
</login-config>
<security-role>
<description>BPEL Admins</description>
<role-name>oc4j-administrators</role-name>
</security-role>
<distributable/>
<resource-ref id="ResRef_BPELContainerDataSource_Id">
<res-ref-name>jdbc/BPELServerDataSource</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>

<ejb-ref id="EjbRef_CubeFinder_Id">
<ejb-ref-name>ejb/collaxa/system/CubeFinderBean</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<home>com.collaxa.cube.engine.ejb.interfaces.ICubeFinderBeanHome</home>
<remote>com.collaxa.cube.engine.ejb.interfaces.ICubeFinderBean</remote>
</ejb-ref>
<ejb-ref id="EjbRef_Dispatcher_Id">
<ejb-ref-name>ejb/collaxa/system/DispatcherBean</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<home>com.collaxa.cube.engine.ejb.interfaces.IDispatcherBeanHome</home>
<remote>com.collaxa.cube.engine.ejb.interfaces.IDispatcherBean</remote>
</ejb-ref>
<ejb-local-ref>
<ejb-ref-name>ejb/local/CubeEngineLocalBean</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<local-home>com.collaxa.cube.engine.ejb.interfaces.ICubeEngineLocalBeanHome</local-home>
<local>com.collaxa.cube.engine.ejb.interfaces.ICubeEngineLocalBean</local>
<ejb-link>CubeEngineBean</ejb-link>
</ejb-local-ref>
<ejb-local-ref>
<ejb-ref-name>ejb/local/ProcessManagerLocalBean</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<local-home>com.oracle.bpel.client.ejb.interfaces.IBPELProcessManagerLocalBeanHome</local-home>
<local>com.oracle.bpel.client.ejb.interfaces.IBPELProcessManagerLocalBean</local>
<ejb-link>ProcessManagerBean</ejb-link>
</ejb-local-ref>
<ejb-local-ref>
<ejb-ref-name>ejb/local/CubeDeliveryLocalBean</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<local-home>com.collaxa.cube.engine.ejb.interfaces.ICubeDeliveryLocalBeanHome</local-home>
<local>com.collaxa.cube.engine.ejb.interfaces.ICubeDeliveryLocalBean</local>
<ejb-link>CubeDeliveryBean</ejb-link>
</ejb-local-ref>
<ejb-local-ref>
<ejb-ref-name>ejb/local/KeyGeneratorLocalBean</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<local-home>com.collaxa.cube.engine.ejb.interfaces.IKeyGeneratorLocalBeanHome</local-home>
<local>com.collaxa.cube.engine.ejb.interfaces.IKeyGeneratorLocalBean</local>
<ejb-link>KeyGeneratorBean</ejb-link>
</ejb-local-ref>
<ejb-local-ref>
<ejb-ref-name>ejb/local/MessageLocalBean</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<local-home>com.collaxa.cube.engine.ejb.interfaces.IMessageLocalBeanHome</local-home>
<local>com.collaxa.cube.engine.ejb.interfaces.IMessageLocalBean</local>
<ejb-link>MessageBean</ejb-link>
</ejb-local-ref>
<ejb-local-ref>
<ejb-ref-name>ejb/local/ServerLocalBean</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
     <local-home>com.oracle.bpel.client.ejb.interfaces.IServerLocalBeanHome</local-home>
<local>com.oracle.bpel.client.ejb.interfaces.IServerLocalBean</local>
<ejb-link>ServerBean</ejb-link>
</ejb-local-ref>
</web-app>
jazn.xml : C:\product1\10.1.3.1\OracleAS_1\j2ee\home\config
<?xml version = '1.0' encoding = 'UTF-8' standalone = 'yes'?>
<jazn xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/jazn-10_0.xsd" schema-major-version="10" schema-minor-version="0" provider="XML" location="./system-jazn-data.xml" default-realm="jazn.com" persistence="ALL">
     <property name="custom.sso.url.login" value="/jsso/SSOLogin"/>
     <property name="custom.sso.key.alias" value="{AES-128}dpvTz49oIQWnM1gZfdpZ1w=="/>
     <property name="idm.token.asserter.class" value="oracle.security.jazn.sso.SSOCookieTokenAsserter"/>
     <property name="idm.token.collector.class" value="oracle.security.jazn.sso.SSOCookieTokenCollector"/>
     <property name="idm.token.type" value="HTTP_COOKIE"/>
     <property name="idm.token.collector.cookie.1" value="ORA_OC4J_SSO"/>
     <property name="custom.sso.url.logout" value="/jsso/SSOLogout"/>
     <property name="idm.authentication.name" value="JavaSSO"/>
</jazn>
system-jazn-data.xml
<?xml version="1.0" encoding="UTF-8" standalone='yes'?>
<jazn-data
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/jazn-data-10_0.xsd"
schema-major-version="10"
schema-minor-version="0"
>

<jazn-realm>
     <realm>
          <name>jazn.com</name>
          <users>
               <user>
                    <name>Bharani</name>
                    <guid>99116C7155E211DFBFB59D7811B59628</guid>
                    <credentials>{903}26NFSvxAeBAo3nBkbvJ/e2BCD+actZzi</credentials>
               </user>
          </users>
               <role>
                    <name>oc4j-administrators</name>
                    <display-name>OC4J Admin Role</display-name>
                    <description>Administrative role for OC4J</description>
                    <guid>8A00C8701A0511DFBF99734349FF0592</guid>
                    <members>
                         <member>
                              <type>user</type>
                              <name>oc4jadmin</name>
                         </member>
                    </members>
               </role>
          </roles>
     </realm>
</jazn-realm>

<jacc-repository>
</jacc-repository>
<jazn-policy>
     <grant>
          <grantee>
               <principals>
                    <principal>
                         <realm-name>jazn.com</realm-name>
                         <type>role</type>
                         <class>oracle.security.jazn.spi.xml.XMLRealmRole</class>
                         <name>jazn.com/oc4j-administrators</name>
                    </principal>
               </principals>
          </grantee>
          <permissions>
               <permission>
                    <class>oracle.security.jazn.policy.AdminPermission</class>
                    <name>oracle.security.jazn.realm.RealmPermission$jazn.com$createrole</name>
               </permission>
               <permission>
                    <class>oracle.security.jazn.policy.AdminPermission</class>
                    <name>oracle.security.jazn.realm.RealmPermission$jazn.com$modifyrealmmetadata</name>
               </permission>
               <permission>
                    <class>oracle.security.jazn.policy.AdminPermission</class>
                    <name>oracle.security.jazn.policy.RoleAdminPermission$jazn.com/*$</name>
               </permission>
               <permission>
                    <class>oracle.security.jazn.policy.AdminPermission</class>
                    <name>oracle.security.jazn.realm.RealmPermission$jazn.com$createrealm</name>
               </permission>
               <permission>
                    <class>oracle.security.jazn.policy.AdminPermission</class>
                    <name>oracle.security.jazn.realm.RealmPermission$jazn.com$droprealm</name>
               </permission>
               <permission>
                    <class>oracle.security.jazn.policy.AdminPermission</class>
                    <name>oracle.security.jazn.realm.RealmPermission$jazn.com$droprole</name>
               </permission>
               <permission>
                    <class>oracle.security.jazn.policy.RoleAdminPermission</class>
                    <name>jazn.com/*</name>
               </permission>
               <permission>
                    <class>com.evermind.server.AdministrationPermission</class>
                    <name>administration</name>
                    <actions>administration</actions>
               </permission>
               <permission>
                    <class>oracle.security.jazn.realm.RealmPermission</class>
                    <name>jazn.com</name>
                    <actions>modifyrealmmetadata</actions>
               </permission>
               <permission>
                    <class>oracle.security.jazn.realm.RealmPermission</class>
                    <name>jazn.com</name>
                    <actions>createrealm</actions>
               </permission>
               <permission>
                    <class>oracle.security.jazn.realm.RealmPermission</class>
                    <name>jazn.com</name>
                    <actions>dropuser</actions>
               </permission>
               <permission>
                    <class>oracle.security.jazn.realm.RealmPermission</class>
                    <name>jazn.com</name>
                    <actions>droprealm</actions>
               </permission>
               <permission>
                    <class>com.evermind.server.rmi.RMIPermission</class>
                    <name>login</name>
               </permission>
               <permission>
                    <class>com.evermind.server.rmi.RMIPermission</class>
                    <name>subject.propagation</name>
               </permission>
          </permissions>
     </grant>
     <grant>
          <grantee>
               <principals>
                    <principal>
                         <realm-name>jazn.com</realm-name>
                         <type>role</type>
                         <class>oracle.security.jazn.spi.xml.XMLRealmRole</class>
                         <name>jazn.com/ascontrol_admin</name>
                    </principal>
               </principals>
          </grantee>
          <permissions>
               <permission>
                    <class>oracle.security.jazn.policy.AdminPermission</class>
                    <name>oracle.security.jazn.realm.RealmPermission$jazn.com$createrole</name>
               </permission>
               <permission>
                    <class>oracle.security.jazn.policy.AdminPermission</class>
                    <name>oracle.security.jazn.realm.RealmPermission$jazn.com$modifyrealmmetadata</name>
               </permission>
               <permission>
                    <class>oracle.security.jazn.policy.AdminPermission</class>
                    <name>oracle.security.jazn.policy.RoleAdminPermission$jazn.com/*$</name>
               </permission>
               <permission>
                    <class>oracle.security.jazn.policy.AdminPermission</class>
                    <name>oracle.security.jazn.realm.RealmPermission$jazn.com$createrealm</name>
               </permission>
               <permission>
                    <class>oracle.security.jazn.policy.AdminPermission</class>
                    <name>oracle.security.jazn.realm.RealmPermission$jazn.com$droprealm</name>
               </permission>
               <permission>
                    <class>oracle.security.jazn.policy.AdminPermission</class>
                    <name>oracle.security.jazn.realm.RealmPermission$jazn.com$droprole</name>
               </permission>
               <permission>
                    <class>oracle.security.jazn.policy.RoleAdminPermission</class>
                    <name>jazn.com/*</name>
               </permission>
               <permission>
                    <class>com.evermind.server.AdministrationPermission</class>
                    <name>administration</name>
                    <actions>administration</actions>
               </permission>
               <permission>
                    <class>oracle.security.jazn.realm.RealmPermission</class>
                    <name>jazn.com</name>
                    <actions>modifyrealmmetadata</actions>
               </permission>
               <permission>
                    <class>oracle.security.jazn.realm.RealmPermission</class>
                    <name>jazn.com</name>
                    <actions>createrealm</actions>
               </permission>
               <permission>
                    <class>oracle.security.jazn.realm.RealmPermission</class>
                    <name>jazn.com</name>
                    <actions>dropuser</actions>
               </permission>
               <permission>
                    <class>oracle.security.jazn.realm.RealmPermission</class>
                    <name>jazn.com</name>
                    <actions>droprealm</actions>
               </permission>
               <permission>
                    <class>com.evermind.server.rmi.RMIPermission</class>
                    <name>login</name>
               </permission>
               <permission>
                    <class>com.evermind.server.rmi.RMIPermission</class>
                    <name>subject.propagation</name>
               </permission>
          </permissions>
     </grant>
     <grant>
          <grantee>
               <principals>
                    <principal>
                         <realm-name>jazn.com</realm-name>
                         <type>role</type>
                         <class>oracle.security.jazn.spi.xml.XMLRealmRole</class>
                         <name>jazn.com/oc4j-app-administrators</name>
                    </principal>
               </principals>
          </grantee>
          <permissions>
               <permission>
                    <class>com.evermind.server.rmi.RMIPermission</class>
                    <name>login</name>
               </permission>
          </permissions>
     </grant>
     <grant>
          <grantee>
               <principals>
                    <principal>
                         <realm-name>jazn.com</realm-name>
                         <type>role</type>
                         <class>oracle.security.jazn.spi.xml.XMLRealmRole</class>
                         <name>jazn.com/users</name>
                    </principal>
               </principals>
          </grantee>
          <permissions>
               <permission>
                    <class>com.evermind.server.rmi.RMIPermission</class>
                    <name>login</name>
               </permission>
          </permissions>
     </grant>
     <grant>
          <grantee>
               <principals>
                    <principal>
                         <realm-name>jazn.com</realm-name>
                         <type>user</type>
                         <class>oracle.security.jazn.spi.xml.XMLRealmUser</class>
                         <name>jazn.com/anonymous</name>
                    </principal>
               </principals>
          </grantee>
          <permissions>
               <permission>
                    <class>com.evermind.server.rmi.RMIPermission</class>
                    <name>login</name>
               </permission>
          </permissions>
     </grant>
     <grant>
          <grantee>
               <principals>
                    <principal>
                         <realm-name>jazn.com</realm-name>
                         <type>role</type>
                         <class>oracle.security.jazn.spi.xml.XMLRealmRole</class>
                         <name>jazn.com/BPMSystemAdmin</name>
                    </principal>
               </principals>
          </grantee>
          <permissions>
               <permission>
                    <class>com.collaxa.security.ServerPermission</class>
                    <name>server</name>
                    <actions>all</actions>
               </permission>
          </permissions>
     </grant>
     <grant>
          <grantee>
               <principals>
                    <principal>
                         <realm-name>jazn.com</realm-name>
                         <type>role</type>
                         <class>oracle.security.jazn.spi.xml.XMLRealmRole</class>
                         <name>jazn.com/BPMDefaultDomainAdmin</name>
                    </principal>
               </principals>
          </grantee>
          <permissions>
               <permission>
                    <class>com.collaxa.security.DomainPermission</class>
                    <name>default</name>
                    <actions>all</actions>
               </permission>
          </permissions>
     </grant>
     <grant>
          <grantee>
               <principals>
                    <principal>
                         <realm-name>jazn.com</realm-name>
                         <type>role</type>
                         <class>oracle.security.jazn.spi.xml.XMLRealmRole</class>
                         <name>bpel_users</name>
                    </principal>
               </principals>
          </grantee>
          <permissions>
               <permission>
                    <class>com.evermind.server.AdministrationPermission</class>
                    <name>administration</name>
                    <actions>administration</actions>
               </permission>
               <permission>
                    <class>com.evermind.server.rmi.RMIPermission</class>
                    <name>login</name>
               </permission>
          </permissions>
     </grant>
     <grant>
          <grantee>
               <principals>
                    <principal>
                         <class>sun.security.acl.PrincipalImpl</class>
                         <name>oc4j-administrators</name>
                    </principal>
               </principals>
          </grantee>
          <permissions>
               <permission>
                    <class>java.lang.RuntimePermission</class>
                    <name>setContextClassLoader</name>
               </permission>
          </permissions>
     </grant>
</jazn-policy>

<jazn-loginconfig>
     <application>
          <name>oracle.security.jazn.oc4j.CertificateAuthenticator</name>
          <login-modules>
               <login-module>
                    <class>oracle.security.jazn.login.module.X509LoginModule</class>
                    <control-flag>required</control-flag>
                    <options>
                         <option>
                              <name>addAllRoles</name>
                              <value>true</value>
                         </option>
                    </options>
               </login-module>
          </login-modules>
     </application>
     <application>
          <name>oracle.security.jazn.tools.Admintool</name>
          <login-modules>
               <login-module>
                    <class>oracle.security.jazn.login.module.RealmLoginModule</class>
                    <control-flag>required</control-flag>
                    <options>
                         <option>
                              <name>addAllRoles</name>
                              <value>true</value>
                         </option>
                    </options>
               </login-module>
          </login-modules>
     </application>
     <application>
          <name>oracle.security.jazn.oc4j.WebCoreIDSSOAuthenticator</name>
          <login-modules>
               <login-module>
                    <class>oracle.security.jazn.login.module.coreid.CoreIDLoginModule</class>
                    <control-flag>required</control-flag>
                    <options>
                         <option>
                              <name>coreid.name.attribute</name>
                              <value>your credential mapping variable name</value>
                         </option>
                         <option>
                              <name>addAllRoles</name>
                              <value>true</value>
                         </option>
                         <option>
                              <name>coreid.resource.operation</name>
                              <value>your oreid resource operation</value>
                         </option>
                         <option>
                              <name>coreid.resource.type</name>
                              <value>your coreid resource type</value>
                         </option>
                         <option>
                              <name>coreid.name.header</name>
                              <value>your http header name variable</value>
                         </option>
                         <option>
                              <name>coreid.resource.name</name>
                              <value>your coreid resource name</value>
                         </option>
                         <option>
                              <name>coreid.password.attribute</name>
                              <value>your password authentication variable</value>
                         </option>
                         <option>
                              <name>coreid.password.header</name>
                              <value>your http header password variable</value>
                         </option>
                    </options>
               </login-module>
          </login-modules>
     </application>
     <application>
          <name>oracle.security.wss.jaas.SAMLAuthManager</name>
          <login-modules>
               <login-module>
                    <class>oracle.security.jazn.login.module.saml.SAMLLoginModule</class>
                    <control-flag>required</control-flag>
                    <options>
                         <option>
                              <name>issuer.name.1</name>
                              <value>www.oracle.com</value>
                         </option>
                         <option>
                              <name>addAllRoles</name>
                              <value>true</value>
                         </option>
                    </options>
               </login-module>
          </login-modules>
     </application>
     <application>
          <name>oracle.security.jazn.oc4j.DigestAuthenticator</name>
          <login-modules>
               <login-module>
                    <class>oracle.security.jazn.login.module.digest.DigestLoginModule</class>
                    <control-flag>required</control-flag>
                    <options>
                         <option>
                              <name>addAllRoles</name>
                              <value>true</value>
                         </option>
                    </options>
               </login-module>
          </login-modules>
     </application>
     <application>
          <name>oracle.security.jazn.oc4j.JAZNUserManager</name>
          <login-modules>
               <login-module>
                    <class>oracle.security.jazn.login.module.RealmLoginModule</class>
                    <control-flag>required</control-flag>
                    <options>
                         <option>
                              <name>addAllRoles</name>
                              <value>true</value>
                         </option>
                    </options>
               </login-module>
          </login-modules>
     </application>
     <application>
          <name>oracle.security.wss.jaas.JAASAuthManager</name>
          <login-modules>
               <login-module>
                    <class>oracle.security.jazn.login.module.WSSLoginModule</class>
                    <control-flag>required</control-flag>
                    <options>
                         <option>
                              <name>addAllRoles</name>
                              <value>true</value>
                         </option>
                    </options>
               </login-module>
          </login-modules>
     </application>
</jazn-loginconfig>
<jazn-permission-classes>
</jazn-permission-classes>
</jazn-data>
It is huge to check all these files, but for reference providing all the files for checking the security details.
Thanks for your help...

Not work tablet UI on Prestigio 5080 PRO tablet

I read that browser.ui.layout.tablet = "1" can fix this problem. But it not works. I can work only in pnone interface that is not good for my 8'' tablet.

Would it be possible for you to share the problematic pdf and OS information with us at [email protected] so that we may investigate?
Thanks,
Adobe Reader Team

Propagation is not working

Similar Messages

Maybe you are looking for