Proper Flash Builder 4.6 project setup to use AIR3.2 and Stage3D?

I would love to use Flare3D on a mobile app. Im struggling to get FB to get set up for this.
I have overlayed AIR3.2 and added a flash player 11.2 debugger exe in the players folder as well as playerglobal.swcs for 11.2RC.
When I go to make a new actionscript for mobile project the air namespace is already properly 3.2 from the overlay. I set wmode to direct and the same even again in the actionscript [SWF(wmode="direct")].
When I make a mobile config and test on desktop from an emulated android the debug reports my version properly as 11,2 so I know the FlashPlayerDebugger.exe is working.
I make sure my compiler settings target -swf-version 15.
Yet I always have an 'unknown internal problem' using this type of project. If I do a standard MXML mobile project it works just fine.
I can export to a flash web app using stage3d and it works great. I have the 11.2RC debuggers installed in my browsers. But as soon as I try the same as-only for mobile project it wont work with that useless error.
I am new to flash builder, AIR, Stage3D and Flare3D so Im a bit of a fish out of water.
Can I use stage3d from air3.2 in mobile dev from Flash Builder 4.6? Thanks for any tips!

rendermode should be set to direct in the xml, I have only tested with starlng+air 3.2+android but it did work and i didnt do anything with wmode

Similar Messages

[svn:fx-trunk] 12087: Dev only. Checking in Flash Builder 4 " Library Projects" for building Flex SDK SWCs in trunk.

Revision: 12087
Revision: 12087
Author:   [email protected]
Date:     2009-11-21 20:56:09 -0800 (Sat, 21 Nov 2009)
Log Message:
Dev only. Checking in Flash Builder 4 "Library Projects" for building Flex SDK SWCs in trunk. These projects are easier to import and do not require linked resource variables to be specified.
Note: although the trunk does not build textLayout.swc, there appears to be a legitimate compiler error in FlowGroupElement.as as a cast is missing. I'll follow up with TLF.
QE notes: N/A
Doc notes: N/A
Bugs: N/A
Reviewer: N/A
Tests run: N/A
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/build.xml
Added Paths:
    flex/sdk/trunk/frameworks/projects/airframework/.actionScriptProperties
    flex/sdk/trunk/frameworks/projects/airframework/.flexLibProperties
    flex/sdk/trunk/frameworks/projects/airframework/.project
    flex/sdk/trunk/frameworks/projects/airframework/.settings/
    flex/sdk/trunk/frameworks/projects/airframework/.settings/org.eclipse.core.resources.pref s
    flex/sdk/trunk/frameworks/projects/airspark/.actionScriptProperties
    flex/sdk/trunk/frameworks/projects/airspark/.flexLibProperties
    flex/sdk/trunk/frameworks/projects/airspark/.project
    flex/sdk/trunk/frameworks/projects/airspark/.settings/
    flex/sdk/trunk/frameworks/projects/airspark/.settings/org.eclipse.core.resources.prefs
    flex/sdk/trunk/frameworks/projects/flex/.actionScriptProperties
    flex/sdk/trunk/frameworks/projects/flex/.flexLibProperties
    flex/sdk/trunk/frameworks/projects/flex/.project
    flex/sdk/trunk/frameworks/projects/flex/.settings/
    flex/sdk/trunk/frameworks/projects/flex/.settings/org.eclipse.core.resources.prefs
    flex/sdk/trunk/frameworks/projects/framework/.actionScriptProperties
    flex/sdk/trunk/frameworks/projects/framework/.flexLibProperties
    flex/sdk/trunk/frameworks/projects/framework/.project
    flex/sdk/trunk/frameworks/projects/framework/.settings/
    flex/sdk/trunk/frameworks/projects/framework/.settings/org.eclipse.core.resources.prefs
    flex/sdk/trunk/frameworks/projects/halo/.actionScriptProperties
    flex/sdk/trunk/frameworks/projects/halo/.flexLibProperties
    flex/sdk/trunk/frameworks/projects/halo/.project
    flex/sdk/trunk/frameworks/projects/halo/.settings/
    flex/sdk/trunk/frameworks/projects/halo/.settings/org.eclipse.core.resources.prefs
    flex/sdk/trunk/frameworks/projects/osmf/.actionScriptProperties
    flex/sdk/trunk/frameworks/projects/osmf/.flexLibProperties
    flex/sdk/trunk/frameworks/projects/osmf/.project
    flex/sdk/trunk/frameworks/projects/osmf/.settings/
    flex/sdk/trunk/frameworks/projects/osmf/.settings/org.eclipse.core.resources.prefs
    flex/sdk/trunk/frameworks/projects/rpc/.actionScriptProperties
    flex/sdk/trunk/frameworks/projects/rpc/.flexLibProperties
    flex/sdk/trunk/frameworks/projects/rpc/.project
    flex/sdk/trunk/frameworks/projects/rpc/.settings/
    flex/sdk/trunk/frameworks/projects/rpc/.settings/org.eclipse.core.resources.prefs
    flex/sdk/trunk/frameworks/projects/spark/.actionScriptProperties
    flex/sdk/trunk/frameworks/projects/spark/.flexLibProperties
    flex/sdk/trunk/frameworks/projects/spark/.project
    flex/sdk/trunk/frameworks/projects/spark/.settings/
    flex/sdk/trunk/frameworks/projects/spark/.settings/org.eclipse.core.resources.prefs
    flex/sdk/trunk/frameworks/projects/sparkskins/.actionScriptProperties
    flex/sdk/trunk/frameworks/projects/sparkskins/.flexLibProperties
    flex/sdk/trunk/frameworks/projects/sparkskins/.project
    flex/sdk/trunk/frameworks/projects/sparkskins/.settings/
    flex/sdk/trunk/frameworks/projects/sparkskins/.settings/org.eclipse.core.resources.prefs
    flex/sdk/trunk/frameworks/projects/textLayout/.actionScriptProperties
    flex/sdk/trunk/frameworks/projects/textLayout/.flexLibProperties
    flex/sdk/trunk/frameworks/projects/textLayout/.project
    flex/sdk/trunk/frameworks/projects/textLayout/.settings/
    flex/sdk/trunk/frameworks/projects/textLayout/.settings/org.eclipse.core.resources.prefs
    flex/sdk/trunk/frameworks/projects/wireframe/.actionScriptProperties
    flex/sdk/trunk/frameworks/projects/wireframe/.flexLibProperties
    flex/sdk/trunk/frameworks/projects/wireframe/.project
    flex/sdk/trunk/frameworks/projects/wireframe/.settings/
    flex/sdk/trunk/frameworks/projects/wireframe/.settings/org.eclipse.core.resources.prefs

Status Update - don't know if this is a bug, design flaw, install problem or my misunderstanding.
I got it to work by first changing my Flex library to 4.5.0 - still didn't work with current
app and update mxml files using "2.6" for their namespace versions. But I did at least
get the popup error number 16815 - indicating an error in the update version namespace.
By leaving my application namespace version at "2.6" and changing the update version to "2.5" ... bingo!
I got my new update installed autiomatically.
Is this how it's supposed to work - or are my runtimes mixed up?
Will this work the same using the Flex 4.5.1 SDK? I'll find out shortly
Hope this helps others.

Help deploy flash builder 4.5 project

I need help.
I am trying to deploy my first Flash Builder 4.5 project using the Zend framework. My application runs fine on my localhost (on my home computer). I am having trouble deploying it to my remote server.
The error I receive is ‘Send failed Channel.Connect.Failed error NetConnection.Call.BadVersion: : url:’…’
In the instructions it says that I need to modify the amf-config.ini file as follows:
    Uncomment zend_path and enter the absolute path for zend_path
    Set amf.production to true
    And update webroot with absolute path to the root on the server
Here is the contents of my amf_config.ini file:
[zend]
;set the absolute location path of webroot directory, example:
;Windows: C:\apache\www
;MAC/UNIX: /user/apache/www
webroot =/home4/hiddenp6/public_html/HPD/
;set the absolute location path of zend installation directory, example:
;Windows: C:\apache\PHPFrameworks\ZendFramework\library
;MAC/UNIX: /user/apache/PHPFrameworks/ZendFramework/library
zend_path =/home4/hiddenp6/public_html/HPD/ZendFramework/
[zendamf]
amf.production = true
amf.directories[]=HiddenPointeAdmin-debug/services
Thanks for any help you can offer...

You can disable the asdoc hover by toggling Preferences -> Flash Builder -> Editors -> ActionScript Code -> Show in text hovers.
-Anirudh

How to Build a DC project that makes use of other Projects??

Hi all,
I am trying to build a DC project that makes use of two other projects in my workspace, one is a java class project, the other one is a EJB project where it takes care of database access.
if i right click on the Application and use "Deploy new Archive and Run" it deploys and runs ok.
but if i right click on the DC project and use "Development Component -> Build", it gives me a lot of errors like below, as if it doesn't know where my reference projects are, but i have set them into my java build path.
Can anyone give me some advice?
Thanks.
Here comes the error msg:
008-11-26 14:52:42 /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: test2: Build failed for ecenta.com/test2(MyComponents) in variant "default": The Build terminated with errors
------------------------------------- Build log ------------------------------------------------------
Development Component Build (2008-11-26 14:52:40)
Component name: test2
Component vendor: ecenta.com
SC compartment: MyComponents
Configuration: LocalDevelopment
Location: local
Source code location: ecenta03@LENOVO-73231993
DC root folder: C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\DCs\ecenta.com\test2\_comp\
DC type: Web Dynpro
Host: LENOVO-73231993
DC Model check:
   All used DCs are available locally
   validating dependency to build plugin "sap.com/tc/bi/bp/webDynpro"
   validating dependency to public part "default" of DC "sap.com/tc/cmi"
   validating dependency to public part "default" of DC "sap.com/tc/ddic/ddicruntime"
   validating dependency to public part "default" of DC "sap.com/tc/ddic/metamodel/content"
   validating dependency to public part "default" of DC "sap.com/tc/wd/webdynpro"
   validating dependency to public part "default" of DC "sap.com/tc/logging"
   validating dependency to public part "default" of DC "sap.com/tc/wdp/metamodel/content"
   validating dependency to public part "default" of DC "sap.com/com.sap.aii.proxy.framework"
   validating dependency to public part "default" of DC "sap.com/com.sap.aii.util.misc"
   validating dependency to public part "default" of DC "sap.com/com.sap.exception"
   validating dependency to public part "default" of DC "sap.com/com.sap.mw.jco"
   validating dependency to used DC "sap.com/com.sap.security.api.sda"
   validating dependency to public part "JxlLibAssembly" of DC "ecenta.com/jxl/jar"
   validating dependency to public part "JxlLibCompilation" of DC "ecenta.com/jxl/jar"
   DC model check OK
Start build plugin:
   using build plugin: sap.com/tc/bi/bp/webDynpro
   starting build plugin from : D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP_BUILDT\DCs\sap.com\tc\bi\bp\webDynpro\_comp\gen\default\public\webDynpro\
Build Plugin 'WebdynproPlugin', Version 7.00 SP 14 (645_VAL_REL, built on 2007-11-10 18:28:29 CET, CL76041)
   development component: test2 (ecenta.com)
      software component: MyComponents (demo.sap.com)
                location: local
                    type: Web Dynpro
           build variant: default
         output location: C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\DCs\ecenta.com\test2\_comp\gen\default
       generation folder: C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\t\0EAFE51A1CEEAA916A875CFE652599FE
       plugin start time: 2008-11-26 14:52:40 GMT+08:00 (CST)
                 Java VM: Java HotSpot(TM) Client VM, 1.4.2_18-b06 (Sun Microsystems Inc.)
General options:
convert *.xlf to *.properties: yes
include sources for debugging: yes
Warning: Source folder "META-INF" exists but is empty and will be ignored.
Checking path lengths for sources
Path length checks finished in 0.016 seconds
Preparing data context..
No public part descriptor found for component "tc/cmi" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "tc/ddic/ddicruntime" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "tc/ddic/metamodel/content" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "tc/wd/webdynpro" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "tc/logging" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "tc/wdp/metamodel/content" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "com.sap.aii.proxy.framework" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "com.sap.aii.util.misc" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "com.sap.exception" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "com.sap.mw.jco" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "com.sap.security.api.sda" (vendor "sap.com"), public part "default", using legacy mode.
No 'default' JDK defined, will use running VM.
Data context preparation finished in 0.078 seconds
Creating Ant build file..
Creating output file: C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\DCs\ecenta.com\test2\_comp\gen\default\logs\build.xml
Using macro file:     D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP_BUILDT\DCs\sap.com\tc\bi\bp\webDynpro\_comp\gen\default\public\webDynpro\macros\build.vm
Build file creation finished in 0.109 seconds
Starting Ant..
Using build file:     C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\DCs\ecenta.com\test2\_comp\gen\default\logs\build.xml
Using build target:   build
Using Ant version:    1.6.2
compile:
      [echo] Starting dictionary generator
     [ddgen]
     [ddgen] [Info]    Property deployment is true: Deployment information is provided!
     [ddgen] [Info]    Property sourcepath: C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\DCs\ecenta.com\test2\_comp\src\packages
     [ddgen] [Info]    Property targetpath: C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\t\0EAFE51A1CEEAA916A875CFE652599FE\gen_ddic
     [ddgen] [Info]    Property archivename: ecenta.com~test2
     [ddgen] [Info]    Property vendor: ecenta.com
     [ddgen] [Info]    Property dcname: test2
     [ddgen] [Info]    Property projectlanguage: zh_CN
     [ddgen] [Info]    Property language: Available languages are automatically determined!
     [ddgen] [Info]    Property addpaths ...
     [ddgen] [Info]       SapMetamodelWebdynproContent.zip - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_BUILDT/DCs/sap.com/tc/bi/extwd/_comp/gen/default/public/def/lib/model
     [ddgen] [Info]       SapMetamodelDictionaryContent.zip - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_BUILDT/DCs/sap.com/tc/bi/extddic/_comp/gen/default/public/def/lib/model
     [ddgen] [Info]       aii_util_misc.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_JTECHS/DCs/sap.com/com.sap.aii.util.misc/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       _cmi_api.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_JTECHS/DCs/sap.com/tc/cmi/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       exception.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/com.sap.exception/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       SapMetamodelWebdynproContent.zip - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_JTECHS/DCs/sap.com/tc/wdp/metamodel/content/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       logging.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/logging/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       logging.perf.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/logging/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       _webdynpro_admin.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       _webdynpro_basesrvc.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       _webdynpro_runtime_repository.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       _webdynpro_runtime_repository_pmr.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       _webdynpro_services.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       _webdynpro_clientserver.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       _webdynpro_model_dynamicrfc.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       _webdynpro_modelimpl.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       _webdynpro_pdfobject.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       _webdynpro_portal.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       _webdynpro_progmodel.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       _webdynpro_runtime_designtime_coupling.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       _webdynpro_runtime_designtime_coupling_api.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       SapMetamodelDictionaryContent.zip - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_JTECHS/DCs/sap.com/tc/ddic/metamodel/content/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       jdsr.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/com.sap.mw.jco/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       jrfc.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/com.sap.mw.jco/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       SapDictionaryTypeServices.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_JTECHS/DCs/sap.com/tc/ddic/ddicruntime/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       SapDictionaryTypesRuntime.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_JTECHS/DCs/sap.com/tc/ddic/ddicruntime/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       aii_proxy_rt.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_JTECHS/DCs/sap.com/com.sap.aii.proxy.framework/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       jxl.jar - C:/Documents and Settings/ecenta03/.dtc/LocalDevelopment/DCs/ecenta.com/jxl/jar/_comp/gen/default/public/JxlLibCompilation/lib/java
     [ddgen] [Info]       com.sap.security.api.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/com.sap.security.api.sda/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       com.sap.security.api.perm.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/com.sap.security.api.sda/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]    Initialize generation templates from configuration jar:file:/D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_BUILDT/DCs/sap.com/tc/bi/extddic/_comp/gen/default/public/def/lib/java/SapDictionaryGenerationCore.jar!/DictionaryGenerationConfigurationCompiled.xml
     [ddgen] [Info]    Generating dbtables/sdmDeployDd.xml
     [ddgen] [Info]    Generation finished (0 seconds)
     [ddgen]
     [timer] Dictionary generator finished in 0.469 seconds
     [mkdir] Created dir: C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\t\0EAFE51A1CEEAA916A875CFE652599FE\gen_ddic\datatypes
      [echo] Starting WebDynpro generator
     [wdgen]
     [wdgen] [Info]    Property deployment is true: Deployment information is provided!
     [wdgen] [Info]    Property sourcepath: C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\DCs\ecenta.com\test2\_comp\src\packages
     [wdgen] [Info]    Property targetpath: C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\t\0EAFE51A1CEEAA916A875CFE652599FE\gen_wdp
     [wdgen] [Info]    Property archivename: ecenta.com~test2
     [wdgen] [Info]    Property vendor: ecenta.com
     [wdgen] [Info]    Property dcname: test2
     [wdgen] [Info]    Property projectlanguage: zh_CN
     [wdgen] [Info]    Property language: Available languages are automatically determined!
     [wdgen] [Info]    Property addpaths ...
     [wdgen] [Info]       SapMetamodelWebdynproContent.zip - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_BUILDT/DCs/sap.com/tc/bi/extwd/_comp/gen/default/public/def/lib/model
     [wdgen] [Info]       SapMetamodelDictionaryContent.zip - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_BUILDT/DCs/sap.com/tc/bi/extddic/_comp/gen/default/public/def/lib/model
     [wdgen] [Info]       aii_util_misc.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_JTECHS/DCs/sap.com/com.sap.aii.util.misc/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       _cmi_api.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_JTECHS/DCs/sap.com/tc/cmi/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       exception.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/com.sap.exception/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       SapMetamodelWebdynproContent.zip - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_JTECHS/DCs/sap.com/tc/wdp/metamodel/content/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       logging.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/logging/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       logging.perf.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/logging/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       _webdynpro_admin.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       _webdynpro_basesrvc.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       _webdynpro_runtime_repository.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       _webdynpro_runtime_repository_pmr.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       _webdynpro_services.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       _webdynpro_clientserver.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       _webdynpro_model_dynamicrfc.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       _webdynpro_modelimpl.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       _webdynpro_pdfobject.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       _webdynpro_portal.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       _webdynpro_progmodel.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       _webdynpro_runtime_designtime_coupling.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       _webdynpro_runtime_designtime_coupling_api.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       SapMetamodelDictionaryContent.zip - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_JTECHS/DCs/sap.com/tc/ddic/metamodel/content/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       jdsr.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/com.sap.mw.jco/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       jrfc.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/com.sap.mw.jco/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       SapDictionaryTypeServices.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_JTECHS/DCs/sap.com/tc/ddic/ddicruntime/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       SapDictionaryTypesRuntime.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_JTECHS/DCs/sap.com/tc/ddic/ddicruntime/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       aii_proxy_rt.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_JTECHS/DCs/sap.com/com.sap.aii.proxy.framework/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       jxl.jar - C:/Documents and Settings/ecenta03/.dtc/LocalDevelopment/DCs/ecenta.com/jxl/jar/_comp/gen/default/public/JxlLibCompilation/lib/java
     [wdgen] [Info]       com.sap.security.api.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/com.sap.security.api.sda/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       com.sap.security.api.perm.jar - D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP-JEE/DCs/sap.com/com.sap.security.api.sda/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]    Initialize generation templates from configuration jar:file:/D:/Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_BUILDT/DCs/sap.com/tc/bi/extwd/_comp/gen/default/public/def/lib/java/SapWebDynproGenerationCore.jar!/WebDynproGenerationConfigurationCompiled.xml
     [wdgen] [Info]    cn.ykjt.dbtest1.DBtest1View --> TextView DefaultTextView: UIElement does not have a label
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/IPrivateDBtest1View.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/DBtest1View.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/InternalDBtest1View.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/IPublicDBtest1.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/IPrivateDBtest1.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/DBtest1.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/InternalDBtest1.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/IPublicDBtest1Interface.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/IExternalDBtest1Interface.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/IPrivateDBtest1Interface.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/DBtest1Interface.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/InternalDBtest1Interface.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/DBtest1Interface.wdcontroller
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/IPublicDBtest1InterfaceCfg.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/IExternalDBtest1InterfaceCfg.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/IPrivateDBtest1InterfaceCfg.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/DBtest1InterfaceCfg.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/InternalDBtest1InterfaceCfg.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/DBtest1InterfaceCfg.wdcontroller
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/IPublicDBtest1InterfaceView.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/IPrivateDBtest1InterfaceView.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/DBtest1InterfaceView.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/InternalDBtest1InterfaceView.java
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/IMessageDBtest1.java
     [wdgen] [Info]    Generating configuration/Components/cn.ykjt.dbtest1.DBtest1/DBtest1.xml
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/ResourceDBtest1.properties
     [wdgen] [Info]    Generating packages/cn/ykjt/dbtest1/wdp/ResourceDBtest1_zh_CN.properties
     [wdgen] [Info]    Generating portalapp.xml
     [wdgen] [Info]    Generating wd.xml
     [wdgen] [Info]    Generating application.xml
     [wdgen] [Info]    Generating application-j2ee-engine.xml
     [wdgen] [Info]    Generating PublicPartFileList.properties
     [wdgen] [Info]    Generating PublicPartFileList.xml
     [wdgen] [Info]    Generation finished (0 seconds)
     [wdgen]
     [timer] WebDynpro generator finished in 0.734 seconds
      [echo] Starting Java compiler
      [echo] Settings:
      [echo]         debug: on
      [echo]      optimize: off
      [echo]   deprecation: default
      [echo]       verbose: default
      [echo]      encoding: UTF8
      [echo]        source: default
      [echo]        target: default
      [echo] source paths:
      [echo]       C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\DCs\ecenta.com\test2\_comp\src\packages
      [echo]       C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\t\0EAFE51A1CEEAA916A875CFE652599FE\gen_ddic\datatypes
      [echo]       C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\t\0EAFE51A1CEEAA916A875CFE652599FE\gen_wdp\packages
      [echo]    class path:
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP_JTECHS\DCs\sap.com\com.sap.aii.util.misc\_comp\gen\default\public\default\lib\java\aii_util_misc.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP_JTECHS\DCs\sap.com\tc\cmi\_comp\gen\default\public\default\lib\java\_cmi_api.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\com.sap.exception\_comp\gen\default\public\default\lib\java\exception.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP_JTECHS\DCs\sap.com\tc\wdp\metamodel\content\_comp\gen\default\public\default\lib\java\SapMetamodelWebdynproContent.zip
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\tc\logging\_comp\gen\default\public\default\lib\java\logging.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\tc\logging\_comp\gen\default\public\default\lib\java\logging.perf.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_admin.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_basesrvc.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_runtime_repository.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_runtime_repository_pmr.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_services.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_clientserver.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_model_dynamicrfc.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_modelimpl.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_pdfobject.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_portal.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_progmodel.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_runtime_designtime_coupling.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_runtime_designtime_coupling_api.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP_JTECHS\DCs\sap.com\tc\ddic\metamodel\content\_comp\gen\default\public\default\lib\java\SapMetamodelDictionaryContent.zip
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\com.sap.mw.jco\_comp\gen\default\public\default\lib\java\jdsr.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\com.sap.mw.jco\_comp\gen\default\public\default\lib\java\jrfc.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP_JTECHS\DCs\sap.com\tc\ddic\ddicruntime\_comp\gen\default\public\default\lib\java\SapDictionaryTypeServices.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP_JTECHS\DCs\sap.com\tc\ddic\ddicruntime\_comp\gen\default\public\default\lib\java\SapDictionaryTypesRuntime.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP_JTECHS\DCs\sap.com\com.sap.aii.proxy.framework\_comp\gen\default\public\default\lib\java\aii_proxy_rt.jar
      [echo]       C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\DCs\ecenta.com\jxl\jar\_comp\gen\default\public\JxlLibCompilation\lib\java\jxl.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\com.sap.security.api.sda\_comp\gen\default\public\default\lib\java\com.sap.security.api.jar
      [echo]       D:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\com.sap.security.api.sda\_comp\gen\default\public\default\lib\java\com.sap.security.api.perm.jar
      [echo]    output dir: C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\t\0EAFE51A1CEEAA916A875CFE652599FE\classes
     [javac] Compiling 22 source files to C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\t\0EAFE51A1CEEAA916A875CFE652599FE\classes
     [javac] ERROR: C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\t\0EAFE51A1CEEAA916A875CFE652599FE\gen_wdp\packages\cn\ykjt\dbtest1\DBtest1View.java:22: package com.ecenta.materialplan does not exist
     [javac] ERROR: import com.ecenta.materialplan.MaterialPlanProcessor;
     [javac] ERROR:                                ^
     [javac] ERROR: C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\t\0EAFE51A1CEEAA916A875CFE652599FE\gen_wdp\packages\cn\ykjt\dbtest1\DBtest1View.java:23: package com.ecenta.materialplan does not exist
     [javac] ERROR: import com.ecenta.materialplan.MaterialPlanProcessorHome;
     [javac] ERROR:                                ^
     [javac] ERROR: C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\t\0EAFE51A1CEEAA916A875CFE652599FE\gen_wdp\packages\cn\ykjt\dbtest1\DBtest1View.java:105: cannot resolve symbol
     [javac] ERROR: symbol : class MaterialPlanProcessorHome
     [javac] ERROR: location: class cn.ykjt.dbtest1.DBtest1View
     [javac] ERROR:                     MaterialPlanProcessorHome materialPlanHome = (MaterialPlanProcessorHome) ctx.lookup("MaterialPlanJNDI");
     [javac] ERROR:                                 ^
     [javac] ERROR: C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\t\0EAFE51A1CEEAA916A875CFE652599FE\gen_wdp\packages\cn\ykjt\dbtest1\DBtest1View.java:105: cannot resolve symbol
     [javac] ERROR: symbol : class MaterialPlanProcessorHome
     [javac] ERROR: location: class cn.ykjt.dbtest1.DBtest1View
     [javac] ERROR:                     MaterialPlanProcessorHome materialPlanHome = (MaterialPlanProcessorHome) ctx.lookup("MaterialPlanJNDI");
     [javac] ERROR:                                                                               ^
     [javac] ERROR: C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\t\0EAFE51A1CEEAA916A875CFE652599FE\gen_wdp\packages\cn\ykjt\dbtest1\DBtest1View.java:106: cannot resolve symbol
     [javac] ERROR: symbol : class MaterialPlanProcessor
     [javac] ERROR: location: class cn.ykjt.dbtest1.DBtest1View
     [javac] ERROR:                     MaterialPlanProcessor proc = materialPlanHome.create();
     [javac] ERROR:                                 ^
     [javac] 5 errors
Error: C:\Documents and Settings\ecenta03\.dtc\LocalDevelopment\DCs\ecenta.com\test2\_comp\gen\default\logs\build.xml:154: Compile failed; see the compiler error output for details.
     at org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:938)
     at org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:758)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
     at org.apache.tools.ant.Task.perform(Task.java:364)
     at org.apache.tools.ant.Target.execute(Target.java:341)
     at org.apache.tools.ant.Target.performTasks(Target.java:369)
     at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
     at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:116)
     at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:58)
     at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:196)
     at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:168)
     at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
     at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
     at sun.reflect.GeneratedMethodAccessor608.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:350)
     at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:99)
     at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:73)
     at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:59)
     at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1750)
     at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:6004)
     at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
     at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
     at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
     at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
Ant runtime 1.578 seconds
Ant build finished with ERRORS
Compile failed; see the compiler error output for details.
Error: Build stopped due to an error: Compile failed; see the compiler error output for details.
Build plugin finished at 2008-11-26 14:52:42 GMT+08:00 (CST)
Total build plugin runtime: 1.984 seconds
Build finished with ERROR

Thanks for the reply, i think i m getting close.
by making my EJB project a DC project and put the public parts into my Used DC, i reduce the build errors down to 2 (from more than 10).
maybe i m not making my EJB project into DC properly
the error msg itself is related to the EJB project:
[javac] Compiling 22 source files to C:\Documents and Settings\Administrator\.dtc\LocalDevelopment\t\587CAFC00F9128BE9AF538F893A3FFFB\classes
     [javac] ERROR: C:\Documents and Settings\Administrator\.dtc\LocalDevelopment\t\587CAFC00F9128BE9AF538F893A3FFFB\gen_wdp\packages\com\ecenta\excelimport\ExcelImport.java:595: cannot access javax.ejb.EJBHome
     [javac] ERROR: file javax\ejb\EJBHome.class not found
     [javac] ERROR:                MaterialPlanProcessor proc = materialPlanHome.create();
     [javac] ERROR:                                                                      ^
     [javac] ERROR: C:\Documents and Settings\Administrator\.dtc\LocalDevelopment\t\587CAFC00F9128BE9AF538F893A3FFFB\gen_wdp\packages\com\ecenta\excelimport\ExcelImport.java:602: cannot access javax.ejb.EJBObject
     [javac] ERROR: file javax\ejb\EJBObject.class not found
     [javac] ERROR:                materialPlanModel = proc.newMaterialPlan(""+materialNo,quantity,mDesc,mPrice,mName,factory,site,cc,wbs,requestor,traxNo,ps,mobileType,creationDate,requestDate,status,creator,unit);
     [javac] ERROR:                                                 ^
     [javac] 2 errors

How to Setup Flash Builder ActionScript only project for iPad?

Hello!
Can someone give a short guide on how to setup an ActionScript only prject in flash builder such that it can be compiled using adt and deployed to the iPad?
i created successfully iphone games using FlashIDE and PFI.
now I'd like to create an iPad app using Flash Builder (ActionScript only). but I fail to load the compiled IPA to the ipad, keep getting different errormessages thus i think something with my projectsetup is wrong

Yes, in Terminal you type a single line which is made from the path to the adt application, some parameters, and paths to other documents. Here's the full list of things:
/Location/to/AdobeAIRSDK_2.6/bin/adt
-package
-target ipa-test
-provisioning-profile /Location/to/Provision.mobileprovision
-storetype pkcs12
-keystore /Location/to/Certificates.p12
-storepass password
NameOfApp.ipa ApplicationDescriptor-app.xml
-C /Location/to/swf NameOfApp.swf
splashscreens
icons
That "-C" line is clever, it does a directory change to the folder you give it, so after the -C /location/to/swf part it will then look in that same folder for other documents, and for where to build the IPA file.

Flash Builder deleted my project?

So I just copied an existing ActionScript Mobile Project in Flash Builder 4.7. After copying it I right clicked and went to rename. After I renamed it both my original project and the new copied project disappeared from the IDE.
Usually when you deleted a project it asks you to keep or remove the contents of the project folder but I didnt delete it and yet both project folders in flashbuilder IDE and where they would be stored on my pc are gone.
Obviously nothing can be done about this now but to lose all that work is ridiculous. 40+ hours of work has simply vanished with no warning or trace. I want to throw my computer out the window right now.
This has got to be a bug of some sort that would need to be fixed asap.
As a side note I wont be copying projects within flash builder anymore.
Thanks Adobe!

Guess I jumped the gun a bit on that question.
In double checking I realized a few other files were missing from my creative cloud directory. So it clearly wasn't syncing properly. I pulled down the old creative cloud directory that was stored locally from my backup before the reinstall and copied that over and it worked perfectly.

Project setup for a mobile and desktop application including native extensions (ANE)?

I'm using Flash Builder 4.6 and I want to develop an application that is deployed to mobile and desktop devices. Therefore I tried a setup with three projects; one desktop project for Windows and Mac OSX, one mobile project for iOS and Android and also one library project for shared resources. The library project is used in the mobile and desktop project. Afterwards I placed all stuff like AS classes and UI components in the library project and instanciate them in the devices project. This works so far. (As consensus decision-making I used Flex components that are available vor mobile and desktop.)
But If I want to use native extensions (ANE) like a DLL for Windows or a gyroscop for mobile devices, then I can't add the ANE to the library project. I have to add the ANE file separately to each device project and build a separate UI components. Is this the way it's intend to use ANE files? Is there an even simpler approach?
Or is there a completly different way, e.g. setup just one common project (instead of three) and use different skins for mobile and desktop?
Your answer is appreciated. (Including links to documentation and tutorials.)

This thread doesn't look promising:
http://forums.adobe.com/message/4737831
Same here:
http://stackoverflow.com/questions/11143907/flashbuilder-4-6-how-do-setup-project-for-mobi le-desktop-publishing
Though if you're using Starling, there's some setup instructions here:
http://wiki.starling-framework.org/manual/project_setup

Flash Builder 4.0 Standalone VS Plugin for Flex and Java Development

Hello,
I have recently installed Flash Builder 4.0 for a personal project. The server side of the project was going to be developed in ASP.NET but at the last minute I decided to change it to Java. However now I am wondering if it would be better to uninstall and install Eclipse with the Flash Builder 4.0 plugin.
I am not really asking which one is better, I guess both are pretty much the same (though I wonder what features are not included in the Eclipse plugin), however I want to know which one would let me create an easier workflow model for the development now that I am going to use Java as well.
I am open to other suggestions as well.
Thanks,
Jorge

Hey guys, I'm brand new to this as well and you probably don't need an answer now but I found this anyway:
Flex Builder and Flash Builder both function as Plug-ins to Eclipse, though each also comes in a "stand-alone" flavor - which is still eclipse, but with a lot of the Eclipse functionality torn out for a smaller footprint.
http://stackoverflow.com/questions/1761919/flex-php-flash-builder-4-vs-eclipse
All the best!

Run/Debug on a device with Flash Builder 4.7 on OSX 10.9 (Mavericks) and iOS7

I am having trouble launching my Actionscript Mobile Project on a device which has iOS7 installed. It recieved this error.
Error occurred while installing the application:
Invalid <device> specified
I can still deploy to my other device with iOS6, I'm running FB4.7 and OSX 10.9. Has anyone else seen this?

Hi there.
I know this is an old post, but I fell here having this same problem for some weeks now, and i just figured my issue. Hope it help others:
My iPhone is connecting automatically with my itunes on computer. Not really sure what type of connection or wireless sync, but the fact is that it IS connecting.
For some weird reason it gets Flash Builder crazy and it cannot find the right device anymore. Even when I get my iPhone connected by cable, it says that it found the device, but doesn`t publish to it. The Flash Builder says that it was published, but nothing gets installed, and the debugger cannot connect.
MY SOLUTION (for now): Turn off the phone wi-fi, so it gets out of my home network. works like a charm and I finally can test on my device again.
Really hope this helps.

Building a best practice web application using ColdFusion and Jave EE

I've been tasked with rewriting a software using ColdFusion. I cannot seem to find a lot of information on best practice development in ColdFusion. I am an experience Java developer who has never used ColdFusion before. I want to build this application using a synergy of ColdFusion and Java EE technologies. Can someone recommend me a book that outlines how to developer in ColdFusion? Ideally this book assumes the reader is an experienced developer with no exposure to ColdFusion. Ideally the methods outlined in the book are still "best practice" methods.

jaisheela wrote:
Hello Friends,
I am also in the same situation.
I am a building a new web application using JSF and AJAX.
Requirement is I need to use IBM version of DOJO and JSF but I need to develop the whole application using Eclipse 3.3,2 and Tomcat 5.5.
With IBM version of DOJO and JSF, will Eclipse and Tomcat help to speed up the development or do you suggest me to go for Rational Application Developer and WebSphere Application Server.
If I need to go with RAD and WAS, then I am new to RAD and WAS, is it easy to use RAD and WAS for this kind of application and implement web applicaiton fast.
Any feedback will be great help.Those don't sound like requirements of the system to me. They sound more like someone wants to improve their CV/resume
From what I've read recently, if it's just fast you want, look at Ruby on Rails

I Reinstalled Premiere Pro CS3, loaded a project I edited using CS3, and NOW I get jagged edges!

Hey everyone. I was using Premiere Pro CS3 to edit some footage I shot with my HPX170 in 1080i 24p Advanced. The P2 footage looked great in Premiere CS3. I upgraded to Premiere CS5, imported the same exact project into CS5 using the same 1080i 24p Advanced setting, and I got jagged stair stepping edges on the objects that were in sharp focus in my footage. Okay, I thought, I'll just reinstall Premiere Pro CS3 and continue editing the footage in CS3 since it looked normal in CS3 with no jagged edges. But, to my surprise, I'M GETTING THE SAME EXACT THING NOW IN PREMIERE PRO CS3!!!! What in the heck is up with that? How can the footage look normal when I imported and editied it before in CS3 and NOW I get jagged stair stepping edges?!!!! I even tried importing a fresh clip from the footage and that clip still has the jagged stair stepping edges. This makes no sense whatsoever! Does anyone know what's going on with this? It seems like an interlace artifact problem BUT, if that's the case, why didn't it do this the first time in Premiere Pro CS3? And trust me, I would have noticed right away if it did!

Hey Shooternz. Which exact playback settings are you asking about? I set the one of the playback settings to "Highest Quality" instead of "Automatic" and nothing changed. I unchecked 24p Pulldown in the "Interpret Footage" section and nothing changed (I don't even remember "24p Pulldown" being in the Interpret Footage section the first time I installed CS3, which is strange. Was that added in an update?). I tried different sizes like HD 1.5, HD 16:9, etc. in the Interpret Footage section and the jaggies are still there. Nothing seems to work. ??? This is weird because they weren't there the first time I edited the footage in CS3 when I installed CS3 the first time. One thing I noticed is, when I installed CS3 the second time and loaded the project, as the project was loading, I got a message that said something like "These project settings cannot be loaded. We will now switch to Desktop Mode." Would that have something to do with it you think?

Create library (swc) in Flash Builder 4 / Flex Project (not in a Library Project)

I want to create a swc file to use it in an other project. I can't use the Flash 4 Library Project to do this, because in a Library Project I
haven't the possibility to use data/services, which I need for my library. After click on "data / services" I get the message "This view is only for Flex-Projects available".
Has anyone a solution for my problem?
Thanks for your help.

Connect to PHP in FB4 is used when you have a PHP Class and you want to use that in FB, for example Employee.php and it has a Employee class and various methods in that like create, update, get, delete.
However, if you have exposed your functionality in PHP as a HTTP URL (i.e. it is not a class), then you should be using HTTPService from the data menu.
So if your file is login.php and is accessible as a URL, then using the HTTPService and enter the URL.
Does this help?
-Sunil

Build AS3 AIR project on Linux for Android and iOS?

We're about to use a build server for taking some work out of our hands (testing, building etc). The build server is running on Linux and therefore we would like to know if we can build the AS3 (AIR) sourcecode on the Linux environment. We usely create apps for Android and iOS.
Can anyone give some more information on this? Is it true that the ADT doesn't run on Linux?

FYI, I updated my blog post. I found a program called ideviceinstaller (available in the Ubuntu repos ala apt-get install ideviceinstaller or from the website) that allows installation of .ipa files onto iOS devices from Linux.
Previously that was the only development iteration step that required a Windows VM. Now in my workflow, a VM is no longer required for iOS development. (Obviously a Mac is still required to upload to the app store at the end.)
Also, a bonus, here's a quick command to view UUID's authorized by the provisioning file inside an .ipa file:
> unzip -c Main.ipa *.mobileprovision | strings | egrep -i string\>[0-9a-f]\{40\}
<string>d9c2fee807324a18baf5a544ffa2c80f23d3****</string>
<string>f634a0a95bc2327f6a26cb39cf18a01918cf****</string>
<string>651e4284467d328e37c18988c981179b5909****</string>
<string>c11d7eef800632d072da067d9b993624f25b****</string>
<string>72d85ab26cd525a328d3a71e3fe416c61fd6****</string>

Project Stock report using QBEW and QBEWH tables

Dear All,
First of all Happy New Year to all of you.
Here is my question: I want to build a ABAP report for stock situation for project stock. The report demands the stock by closing month. Suppose I run the report for month 11/2010, it should show the closing stock at the end of the month 11/2010.
Now I am using the values from table QBEW for this purpose.But QBEW table shows only current entries. If a material stock is changed or value is changed, it goes into history table QBEWH.
Now problem is that if I try to make sum of QBEW and QBEWH, the stock value is excessive. Now I am not sure which entries I should consider from QBEWH table for this purpose.
Has anybody worked on similar requirement?
Thanks in advance!
Regards,
Mahendra Dighe

Hi,
Please try the report S_P00_07000140 - Inventory and Raw material for special stock report.
Thanks.
abdul

I have to constantly re-install flash to get it to work. Using IE9 and Windows 7 64bit

Hello,
Thanks in advance for any help. The last 2 weeks I have had to constantly re-install flash. I have gone through so many steps as recommended on the forum from using the uninstaller to going through the tool options for enabling and disabling items and to NO END I have to re-install for the day if I want to see any flash websites or youtube.
Please note that I have IE9 and am on Windows 7 64 bit. This never use to happen. Furthermore, I do not want to install google chrome because my outlook did not work well with it.
I could not open up links and I hope that I do not have to have google chrome to use Flash now?
Please help it seems that many are experiencing the same?
Thanks,
bluicat

The clean scripts didn't exist at the time, because the installer worked differently. What did exist just the same as today is the caps.db and you need to delete that in C.\Program Files (x86)\Common Files\Adobe\caps.
Mylenium

Proper Flash Builder 4.6 project setup to use AIR3.2 and Stage3D?

Similar Messages

Maybe you are looking for