Property Mapping in remote Profile source vs. User Porfile Mgr
I am confused about Property to user info mapping. I have mapped the user properties that I need to the user info attricutes in the user profile manager. However, if I go to setup the profile source, I am prompted to setup the mapping again. It does not recoganize the mapping already done though the user profile manager. What am I missing or not doing correctly? Do I only need to setup the Profile source no the user profile manager? I'd appreciate any insight into the differences between the two.
Thanks.
Vanita
Staples
On the Profile source, the property map you define here maps Plumtree properties to the attribute names on the remote system you are synching with. An example from the LDAP PWS: on the portal their is a property called "Email Address". LDAP does not have an attribute with the exact name "Email Address", instead this information is stored in an attribute called "mail". So on the Profile Source, you have to map "Email Address" to "mail".
The map on the User Profile Manager allows you to map Plumtree properties to the name of the user info header you want sent to portlets. For most cases this is the same as the property name.
Similar Messages
-
"Property Mapping for Synchronization" User profile export to AD issue - Sharepoint 2013
Trying to map user properties to AD Mapped Attributes.
I map the property "SPS-JobTitle" to AD Attribute "title" with direction "export" click add and then ok to save and everything is fine, I then Map "WorkPhone" with Ad Property "telephoneNumber" with direction
"Export" and click add then ok and now property mapping on both "SPS-JobTitle" and "WorkPhone" show two mappings.
If i go into the propertied it will show two mappings under "Property Mapping for Synchronization" both the title and work phone mappings.
If i remove it from one it removes from both
flavioIt´s a bug in Sharpoint 2013, confirmed by MS.
I reported it in January but its still not fixed :(
The bug can be reproduced just as you mention by enabling export on several AD properties, the property will get duplicated on the previous propery you enabled export on.
This makes it impossible to use the AD export functionality in Sharepoint 2013 until the bug is fixed.
karl -
Deleting user id's mapped to selection profiles in MC77 of SAP APO
Hi,
We usually map selection id's to User Names using MC77 Transaction. This Mapping Of Selection id's to User names is used for quick navaigation in planning book.
But When we delete the user id [When it is Obselete] in SAP, The Selction id mapping exists without getting deleted.
This has created a huge list of selection profiles mapped to obselete user id's.
Please let me know if there is a way to delete the user id's [Not the Selection id's] from the system.
Regards
Naveen Babu.Jhi
pls refer to the screenshot below. There is an option to delete -
Hi, I've got a problem with LDAP Profile Source.
In my LDAP I've got two OU for my user. In the first ou "ou=People" I've got : uid, Name, Society and in the second ou "ou=Society" Address, Telephone, Fax.
I don't know how to get data from multi OU with LDAP Profile Object.Along the lines of what Mark was saying - you must have a single auth source that is bringing in multiple OUs. The trick is that you can have multiple profile sources, simply set the query base in each to your specific OU with the specific property map for that OU. Set each profile source to profile sync the everyone group for your auth source. Each user in the entire auth source will be sync'd by each profile source, but the users will only match one of the two profile sources. This way they get properly sync'd and you get the correct vars.
The other thing you can do is simply setup a single profile source, put all the properties in the property map regardless of OU. Only the properties that values exist for will get imported to the users they exist for. If you want to limit the props however (i.e. they actually exist for both OU's but you only want the ones you specify to show up), then you need to take the 2 profile source route.
Hope this helps,Akash -
Single firefox profile across all users and profiles on networks
I'm in the process of setting up Firefox as the standard browser for an entire building, and part of this is ensuring that everyone's firefox profiles are saved to personal network drives as opposed to the local machines. I can use the profile manager to do this on a user-to-user basis, but what if I want all the users of any machine to use the same firefox profile that points to a specific network drive? (This will ensure users always have their browser settings and such regardless of where they access them, allow us to switch machines out without losing anyone's browser settings, etc. The contents of this drive are specific to the user account, but always have the same path.)
As far as I can tell, profiles created in the profile manager are specific to each (domain) user, which would mean an awful lot of manual profile creation. Is there some way to ensure Firefox always uses a specific Firefox profile or path? Is there some way to have firefox check which profiles exist (in a .bat file, for example), so I can create the proper one if needed? Can I use a command line to set which profile to use by default, or can that only be done from the profile manager GUI?
Finally, and this one may warrant a separate query, but I've found that when using profiles that point to a network drive, trying to open firefox on multiple computers will fail (another instance of firefox is open, close it or restart). Can I tell Firefox to force the old instance closed, or will I have to firefox.exe -no-remote -p "differentProfile" every time?
We're on Windows 7, by the way, for references' sake.We just deploy images, so everyone should have firefox already, but we're pretty good about keeping all data on mapped network drives instead of letting windows save things locally, so I'm trying to find the best way to integrate Firefox in that system as well.
Every user has a network domain account, which can be accessed from anywhere in the building. While mostly people use their own computers, due to the nature of the place, that is often not the case, and several people will need to sign on to the same machine on a given day.
If there are command-line ways of checking for firefox profiles, I can have them run in our logon script to ensure everyone always has access to their personal profiles, but I'm not sure the best way to go about that, yet. I suppose that's the main part of my second question--what is the cleanest way to check for and create/map/assign firefox profiles automatically? -
I've written a profile service to import employee information from our HR system to populate user profiles.
When I run the Profile Source Job, I'm getting this error:
4/14/04 13:16:48- The Profile Source encountered an error (0x80004005): CPTRAPProvider::Initialize, PWS SOAP call failed.4/14/04 13:16:48- *** Job Operation #1 failed: The Profile Source encountered an error (0x80004005): CPTRAPProvider::Initialize, PWS SOAP call failed. (0x4)4/14/04 13:16:48- Done with job operations.4/14/04 13:16:48- The Profile Source encountered an error (0x80004005): CPTRAPProvider::Initialize, PWS SOAP call failed.
Does this look familiar to anyone?
Thanks,Wes [email protected]Joseph, Akash--Let me answer your questions:
Coding is set to Doc Literal for .netSoap timeout is 30 seconds (this is an immediate error)I can access the web service from the automation serverI'm using the Remote Server Basic AuthenticationHaven't gone the TCPTrace route yet.I run Spy from the portal server 98% of the time-- I often forget to run it on the remote servers. When I ran Spy from the Automation Server, it looks like there is SOAP exception being thrown by the remote Profile Web Service when the Initialize call is made:
3342 04-15 10:37:16 Warn SOAP 6092 6084 Envelope.cpp(105) *** COM exception caught *** Error info: IDispatch error #19876 (0x80044fa4): [SOAP fault: faultcode='soap:Server' faultstring='System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.IO.FileNotFoundException: File or assembly name openfoundation, or one of its dependencies, was not found.
File name: "openfoundation"_ at Plumtree.Remote.Profile.Soap.ProfileProviderSoapBinding.Initialize(PropertyListArray PropertyList, NamedValueHolder ProfileSourceInfo, NamedValueHolder AuthSourceInfo)
=== Pre-bind state information ===LOG: DisplayName = openfoundation, Version=2.0.9.8318, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5(Fully-specified)LOG: Appbase = [url=file:///C:/Inetpub/wwwroot/Abra]file:///C:/Inetpub/wwwroot/AbraLOG: Initial PrivatePath = bin_Calling assembly : xpcommon, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null._===
LOG: Publisher policy file is not found.LOG: No redirect found in host configuration file (C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet.config).LOG: Using machine configuration file from C:\WINNT\Microsoft.NET\Framework\v1.1.4322\config\machine.config.LOG: Post-policy reference: openfoundation, Version=2.0.9.8318, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/TemporaryASP.NET Files/abra/16123dc4/9c23a487/openfoundation.DLL.LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/TemporaryASP.NET Files/abra/16123dc4/9c23a487/openfoundation/openfoundation.DLL.LOG: Attempting download of new URL file:///C:/Inetpub/wwwroot/Abra/bin/openfoundation.DLL.LOG: Attempting download of new URL file:///C:/Inetpub/wwwroot/Abra/bin/openfoundation/openfoundation.DLL.LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/TemporaryASP.NET Files/abra/16123dc4/9c23a487/openfoundation.EXE.LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/TemporaryASP.NET Files/abra/16123dc4/9c23a487/openfoundation/openfoundation.EXE.LOG: Attempting download of new URL file:///C:/Inetpub/wwwroot/Abra/bin/openfoundation.EXE.LOG: Attempting download of new URL file:///C:/Inetpub/wwwroot/Abra/bin/openfoundation/openfoundation.EXE. --- End of inner exception stack trace ---'] (105,Envelope.cpp)
Since we've identified a SOAP exception, what do I need to do next?
Thanks all--Wes -
Group Policy Pref - Mapped Drives Not Applying to One User
Hi All,
I’m new to this list, so please excuse any etiquette slip ups.
I have three users at a site. All their machines are running Windows XP Service Pack 3 and have client side extensions installed. I created a group policy to map their default drives using GP User Preferences.
Each of the drives is set to "update".
As an example of the policy created XML is as follows:
<Drive clsid="{935D1B74-9CB8-4e3c-9914-7DD559B7A417}" name="H:" status="H:"
image="2" changed="2009-11-25 05:13:58"
uid="{8A44D2F4-AAE5-4F43-AEEC-D36F08EA619C}" desc="Maps the users H drive to
ServerName\users$\%username%" bypassErrors="1"><Properties action="U"
thisDrive="NOCHANGE" allDrives="NOCHANGE" userName=""
path="\\ServerName\users$\%username%" label="Home (ServerName)"
persistent="1" useLetter="1" letter="H"/></Drive>
and
<Drive clsid="{935D1B74-9CB8-4e3c-9914-7DD559B7A417}" name="J:" status="J:"
image="0" changed="2009-11-30 03:52:58"
uid="{535CD462-A45D-4363-ADA1-2316D5ECC703}" desc="Maps J drive for users to
\\ServerName\apps" bypassErrors="1"><Properties action="C"
thisDrive="NOCHANGE" allDrives="NOCHANGE" userName=""
path="\\ServerName\Apps" label="Apps (ServerName)" persistent="1"
useLetter="1" letter="J"/></Drive>
The group policy is applied to an OU for that site.
All three users are in the same OU.
All three users are also in the same “xxsitecode Users” group.
2 of the users log into their pc and get the mapped drives with no issue, but one user doesn’t.
There are no other login scripts and the user has no manually mapped drives.
He does have a H drive mapped using the profile field in his AD object as a temp measure. But every 90 mins any other manually mapped drives are removed by the policy.
We don’t use roaming profiles
To trouble shoot I have tried
- Reinstalling client side extensions
- Re-joining the pc to the domain
- Running gpupdate from the command prompt to see if any event logs are generated (none are)
- Manually mapping the drives to make sure there is network access etc – I can manually map them/he can access them.
- Creating the user a new account, when he logs in using that account he gets his mapped drives on all PC’s
- Getting the user to log into a different pc, when he does this he doesn’t get his drives – so it’s not his machine or profile
- Manually checking the security on the user object in AD against one of the users who gets their drives mapped
I'm sure the GP is fine because it works for two other users and the testing isolates his user account as the issue.
The Policy I’m having issues with is xxxx Mapped Drives/ Printers
I have posted this issue on the tech net GP discussion groups page, but haven’t had any replies.
Any suggestions would be appreciated.
SimoneWhat's interesting is that I applied a new GP to users - it has one policy setting and one preferences setting. He only gets the policy setting.. aka he gets the wallpaper but not the homepage.
Also, Jorke asked me to post the gpresult /z .
Microsoft (R) Windows (R) XP Operating System Group Policy Result tool v2.0
Copyright (C) Microsoft Corp. 1981-2001
Created On 10/02/2010 at 2:19:34 PM
RSOP results for DOMAIN\USER on MACHINENAME : Logging Mode
OS Type: Microsoft Windows XP Professional
OS Configuration: Member Workstation
OS Version: 5.1.2600
Domain Name: DOMAIN
Domain Type: Windows 2000
Site Name: SITECODE
Roaming Profile:
Local Profile: C:\Documents and Settings\USER.DOMAIN
Connected over a slow link?: No
COMPUTER SETTINGS
CN=MACHINENAME,OU=Laptops,OU=SITECODE,DC=DOMAIN,DC=com,DC=au
Last time Group Policy was applied: 10/02/2010 at 1:06:38 PM
Group Policy was applied from: XXXXXADC.DOMAIN.com.au
Group Policy slow link threshold: 500 kbps
Applied Group Policy Objects
Allow Remote Assistance
au-mdwsus
Default Domain Policy
Legal Notice
Proxy Settings
Logon as service, operating system
AU-WSUS
Desktop Background & Home Page
Reg Permissions for default desktop
Local Admin & Local Power Users
The following GPOs were not applied because they were filtered out
SITECODE Mapped Drives/ Printers
Filtering: Not Applied (Empty)
Local Group Policy
Filtering: Not Applied (Empty)
AVD Rollout
Filtering: Disabled (GPO)
The computer is a part of the following security groups:
BUILTIN\Administrators
Everyone
Debugger Users
BUILTIN\Users
NT AUTHORITY\NETWORK
NT AUTHORITY\Authenticated Users
MACHINENAME$
Domain Computers
CERTSVC_DCOM_ACCESS
Resultant Set Of Policies for Computer:
Software Installations
N/A
Startup Scripts
GPO: Desktop Background & Home Page
Name: image.bat
Parameters:
LastExecuted: 7:55:34 PM
Name: swiftdesktop.vbs
Parameters:
LastExecuted: 7:55:35 PM
Shutdown Scripts
N/A
Account Policies
Audit Policy
User Rights
Security Options
Event Log Settings
Restricted Groups
System Services
Registry Settings
File System Settings
Public Key Policies
N/A
Administrative Templates
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\Terminal Services
State: Enabled
GPO: AU-WSUS
Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\Terminal Services
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\GloballyOpenPorts
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\GloballyOpenPorts\List
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
State: Enabled
GPO: AU-WSUS
Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
State: Enabled
GPO: AU-WSUS
Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\Terminal Services
State: Enabled
GPO: au-mdwsus
Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
State: Enabled
GPO: au-mdwsus
Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\CurrentVersion\Winlogon
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\Terminal Services
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
State: Enabled
GPO: AU-WSUS
Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications
State: Enabled
GPO: AU-WSUS
Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
State: Enabled
GPO: au-mdwsus
Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\Terminal Services
State: Enabled
GPO: Desktop Background & Home Page
Setting: Software\Policies\Microsoft\Internet Explorer\Security
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\Terminal Services
State: Enabled
GPO: AU-WSUS
Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
State: Enabled
GPO: AU-WSUS
Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\RemoteAdminSettings
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\Terminal Services
State: Enabled
GPO: AU-WSUS
Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
State: Enabled
GPO: au-mdwsus
Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
State: Enabled
GPO: AU-WSUS
Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\RemoteAdminSettings
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
State: Enabled
GPO: au-mdwsus
Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
State: Enabled
GPO: Allow Remote Assistance
Setting: Software\policies\Microsoft\Windows NT\Terminal Services
State: Enabled
USER SETTINGS
CN=Matthew Luhrs,OU=Users,OU=SITECODE,DC=DOMAIN,DC=com,DC=au
Last time Group Policy was applied: 10/02/2010 at 1:54:53 PM
Group Policy was applied from: XXXXXADC.DOMAIN.com.au
Group Policy slow link threshold: 500 kbps
Applied Group Policy Objects
Allow Remote Assistance
**** SITECODE Mapped Drives/ Printers - has Gp Pref's that should apply
Default Domain Policy
Proxy Settings
**** Desktop Background & Home Page - has Gp Pref's that should apply
Local Admin & Local Power Users
The following GPOs were not applied because they were filtered out
AU-WSUS
Filtering: Not Applied (Empty)
Legal Notice
Filtering: Disabled (GPO)
Reg Permissions for default desktop
Filtering: Not Applied (Empty)
Logon as service, operating system
Filtering: Not Applied (Empty)
Local Group Policy
Filtering: Not Applied (Empty)
au-mdwsus
Filtering: Not Applied (Empty)
AVD Rollout
Filtering: Disabled (GPO)
The user is a part of the following security groups:
Domain Users
Everyone
Offer Remote Assistance Helpers
BUILTIN\Administrators
BUILTIN\Users
NT AUTHORITY\INTERACTIVE
NT AUTHORITY\Authenticated Users
LOCAL
Computer Account Operators
Internet Users
SITECODE Users
DOMAIN-Public Folders Administrators
All Email Users
DOMAINSWIFTEMAIL
Domain Admins
Offer Remote Assistance Helpers
WSUS Administrators
DHCP Administrators
CERTSVC_DCOM_ACCESS
Resultant Set Of Policies for User:
Software Installations
N/A
Public Key Policies
N/A
Administrative Templates
N/A
Folder Redirection
N/A
Internet Explorer Browser User Interface
GPO: Proxy Settings
Large Animated Bitmap Name: N/A
Large Custom Logo Bitmap Name: N/A
Title BarText: N/A
UserAgent Text: N/A
Delete existing toolbar buttons: No
Internet Explorer Connection
HTTP Proxy Server: Proxy:port
Secure Proxy Server: Proxy:port
FTP Proxy Server: Proxy:port
Gopher Proxy Server: Proxy:port
Socks Proxy Server: Proxy:port
Auto Config Enable: Yes
Enable Proxy: Yes
Use same Proxy: Yes
Internet Explorer URLs
GPO: Proxy Settings
Home page URL: N/A
Search page URL: N/A
Online support page URL: N/A
Internet Explorer Security
Always Viewable Sites: N/A
Password Override Enabled: False
GPO: Proxy Settings
Import the current Content Ratings Settings: No
Import the current Security Zones Settings: No
Import current Authenticode Security Information: No
Enable trusted publisher lockdown: No
Internet Explorer Programs
GPO: Proxy Settings
Import the current Program Settings: No -
Multiple profile sources...ways to combine properties
My situation:
every user is in back end data source 1 (DS1)
some users are in back end data source 2 (DS2)
I can sync in properties from DS1, but its probably out of date. If they are in DS2, then I can sync in this more up to date info. However, there is no way to say "if this property exists in DS2, use it, otherwise, use the property from DS1". Each profile source will overwrite the properties from the other profile source.
I'd combine them into 1 profile source but DS1 is the active directory profile source so I don't want to have to edit it or create my own.
Is there any way around this?Joel Collins wrote:
I'd combine them into 1 profile source but DS1 is the active directory profile source so I don't want to have to edit it or create my own.While it might be the more complex option I think this is the best long term solution to data redundancy. At the very least reconcile the shared data fields and eliminate them from whichever source is less used. -
DirectPropertyManagerBean remote fatal exception from user management um tags.
Hi
I am wondering if any one has experienced the same problems as us or if you have
some advice. Recently we put our web lgoic commerce server 3.5 running on weblogic
server 6.0 and MS SQL server 7 sp 3 into production.
Now we receive remote exceptions from the DirectPropertyManagerBean from our login
jsp pages and <um> tags intermittently which forces us to reboot the application
server a few times a week. This prevents any of our customers from logging into
our site once these exceptions start being thrown.
Our exception stack is Servlet failed with Exception> java.lang.NullPointerException:
at java.lang.String.<init>(String.java:193) at jsp_compiled._commerce._user._mydm._jspService(_mydm.java:282)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:213)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:1265)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1631)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
####<2002/03/08 06:07:29> <Info> <EJB> <***> <wlcsServer> <ExecuteThread: '9'
for queue: 'default'> <angusg> <2269:e645911858eef116> <010051> <EJB Exception
during invocation from home: com.beasys.commerce.foundation.property.DirectPropertyManagerBeanHomeImpl@9f4365
threw exception: java.rmi.RemoteException: EJB Exception:; nested exception is:
java.rmi.RemoteException: Error checking for explicit property in profileType:
Customer Profile> java.rmi.RemoteException: EJB Exception:; nested exception is:
java.rmi.RemoteException: Error checking for explicit property in profileType:
Customer Profile java.rmi.RemoteException: Error checking for explicit property
in profileType: Customer Profile at com.beasys.commerce.foundation.property.DirectPropertyManagerBean.getExplicitProperty(DirectPropertyManagerBean.java:610)
at com.beasys.commerce.foundation.property.DirectPropertyManagerBeanImpl.getExplicitProperty(DirectPropertyManagerBeanImpl.java:190)
at com.beasys.commerce.foundation.property.DirectPropertyManagerBean.getProperty(DirectPropertyManagerBean.java:700)
at com.beasys.commerce.foundation.property.DirectPropertyManagerBean.getProperty(DirectPropertyManagerBean.java:429)
at com.beasys.commerce.foundation.property.DirectPropertyManagerBeanImpl.getProperty(DirectPropertyManagerBeanImpl.java:210)
at com.beasys.commerce.foundation.property.DirectPropertyManagerBeanEOImpl.getProperty(DirectPropertyManagerBeanEOImpl.java:206)
at com.beasys.commerce.foundation.property.DirectPropertyManagerBeanEOImpl_WLSkel.invoke(DirectPropertyManagerBeanEOImpl_WLSkel.java:160)
at weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:128)
at weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
at weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.java:118)
at weblogic.rmi.internal.BasicRequestDispatcher.dispatch(BasicRequestDispatcher.java:115)
at weblogic.rmi.internal.ServerRequest.sendOneWayRaw(ServerRequest.java:88) at
weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:108) at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:247)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:225)
at com.beasys.commerce.foundation.property.DirectPropertyManagerBeanEOImpl_WLStub.getProperty(DirectPropertyManagerBeanEOImpl_WLStub.java:219)
at com.beasys.commerce.user.jsp.beans.CachedProfileBean.getProperty(CachedProfileBean.java:128)
at com.beasys.commerce.user.jsp.beans.CachedProfileBean.getProperty(CachedProfileBean.java:165)
at com.beasys.commerce.user.jsp.tags.GetPropertyTag.getProperty(GetPropertyTag.java:161)
at com.beasys.commerce.user.jsp.tags.GetPropertyTag.doStartTag(GetPropertyTag.java:107)
at jsp_compiled._commerce._user._mydm._jspService(_mydm.java:268) at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:213)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:1265)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1631)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120).
Where should I be looking to address this issue? In the database or application
server?
Thanx JoãoHi
I am wondering if any one has experienced the same problems as us or if you have
some advice. Recently we put our web lgoic commerce server 3.5 running on weblogic
server 6.0 and MS SQL server 7 sp 3 into production.
Now we receive remote exceptions from the DirectPropertyManagerBean from our login
jsp pages and <um> tags intermittently which forces us to reboot the application
server a few times a week. This prevents any of our customers from logging into
our site once these exceptions start being thrown.
Our exception stack is Servlet failed with Exception> java.lang.NullPointerException:
at java.lang.String.<init>(String.java:193) at jsp_compiled._commerce._user._mydm._jspService(_mydm.java:282)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:213)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:1265)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1631)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
####<2002/03/08 06:07:29> <Info> <EJB> <***> <wlcsServer> <ExecuteThread: '9'
for queue: 'default'> <angusg> <2269:e645911858eef116> <010051> <EJB Exception
during invocation from home: com.beasys.commerce.foundation.property.DirectPropertyManagerBeanHomeImpl@9f4365
threw exception: java.rmi.RemoteException: EJB Exception:; nested exception is:
java.rmi.RemoteException: Error checking for explicit property in profileType:
Customer Profile> java.rmi.RemoteException: EJB Exception:; nested exception is:
java.rmi.RemoteException: Error checking for explicit property in profileType:
Customer Profile java.rmi.RemoteException: Error checking for explicit property
in profileType: Customer Profile at com.beasys.commerce.foundation.property.DirectPropertyManagerBean.getExplicitProperty(DirectPropertyManagerBean.java:610)
at com.beasys.commerce.foundation.property.DirectPropertyManagerBeanImpl.getExplicitProperty(DirectPropertyManagerBeanImpl.java:190)
at com.beasys.commerce.foundation.property.DirectPropertyManagerBean.getProperty(DirectPropertyManagerBean.java:700)
at com.beasys.commerce.foundation.property.DirectPropertyManagerBean.getProperty(DirectPropertyManagerBean.java:429)
at com.beasys.commerce.foundation.property.DirectPropertyManagerBeanImpl.getProperty(DirectPropertyManagerBeanImpl.java:210)
at com.beasys.commerce.foundation.property.DirectPropertyManagerBeanEOImpl.getProperty(DirectPropertyManagerBeanEOImpl.java:206)
at com.beasys.commerce.foundation.property.DirectPropertyManagerBeanEOImpl_WLSkel.invoke(DirectPropertyManagerBeanEOImpl_WLSkel.java:160)
at weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:128)
at weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
at weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.java:118)
at weblogic.rmi.internal.BasicRequestDispatcher.dispatch(BasicRequestDispatcher.java:115)
at weblogic.rmi.internal.ServerRequest.sendOneWayRaw(ServerRequest.java:88) at
weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:108) at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:247)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:225)
at com.beasys.commerce.foundation.property.DirectPropertyManagerBeanEOImpl_WLStub.getProperty(DirectPropertyManagerBeanEOImpl_WLStub.java:219)
at com.beasys.commerce.user.jsp.beans.CachedProfileBean.getProperty(CachedProfileBean.java:128)
at com.beasys.commerce.user.jsp.beans.CachedProfileBean.getProperty(CachedProfileBean.java:165)
at com.beasys.commerce.user.jsp.tags.GetPropertyTag.getProperty(GetPropertyTag.java:161)
at com.beasys.commerce.user.jsp.tags.GetPropertyTag.doStartTag(GetPropertyTag.java:107)
at jsp_compiled._commerce._user._mydm._jspService(_mydm.java:268) at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:213)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:1265)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1631)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120).
Where should I be looking to address this issue? In the database or application
server?
Thanx João -
The property XMLDataVariable on the XML Source was empty - Case Foreach Loop Container
I have very simple XML source and OLE DB Source in Foreach Loop Container,
but seem to get error, because XML Source cannot find the XML.
"Error at Data Flow Task. The property XMLDataVariable on the XML Source was empty"
Variables:
FileExtention = *.xml
FilePath =
FolderPath = C:\Customer\XML
XML Source:
Data Access mode = XML file from variable
Variable name = User::filePath
Foreach Loop Container:
Enumerator = Foreach File Enumerator
Expression-Directory = @User:FolderPath
Expression-FileSpec = @User::FileExtension
Enumerator Folder = C:\Customer\XML
Files = *.xml
Variable mapping-User::FilePath = 0
Kenny_IHave you filled the variable (filePath) with a default value? Otherwise the XML Source cannot validate. Alternative is look for a property "DelayValidation". In most cases this is a property of the connection manager, but you're not using
one for the xml source....
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter -
Error when attaching a remote XML source
Hello,
When I try and attach a remote XML source to my XSL file,
Dreamweaver CS3
tells me "Unable to locate or parse the XML source".
The XML file in question is located at
http://weather.yahooapis.com/forecastrss?p=UKXX0085
- which is a fully
functioning URL to an XML page - I can load it okay, and I
can view the XML
source.
Why does Dreamweaver report that it cannot access it? If I
open the source
of that URL and save it as a .xml file and attach it to my
XSL locally, it
works just fine - so it works locally but not remotely. The
source is likely
to change frequently, so attaching a local XML file is not an
option.
If I ignore the Dreamweaver error message and use that source
anyway, the
browser just responds with "An error occured while loading
XML document
http://weather.yahooapis.com/forecastrss?p=UKXX0055".
Error message was: A
connection with the server could not be established ".
The only thing I can think of is, the URL to the XML source
doesn't end in
".xml" - but then again, hardly any XML sources on the web do
so I can't be
the first person who wants to try and incorporate one in
their site like
this!
Any help appreciated!
Cheers,
D.> I'm told that, in the ASP that uses the XSL fragment, I
can define the
> proxy server manually so that the request can still be
made. Try as I
> might I cannot find any code for ASP.net or ASP VBScript
that allows me to
> manually specify the proxy to be used (or, indeed, to
force the code to
> use the browsers default proxy). Any ideas?
Okay, now using this in a new file called web.config
<configuration>
<system.net>
<defaultProxy>
<proxy
usesystemdefault = "false"
proxyaddress="
http://myproxy.blah.blah:80"
bypassonlocal="false"
/>
</defaultProxy>
</system.net>
</configuration>
All is well - except, that restricts the app to people who
are using this
proxy - any idea how to fix that code to make it default to
the users
browser settings? (Which I thought was the default in .Net
but maybe not??).
D. -
How to render web items based on the authorisation profile of the user
Hello,
Is there any way to render web items based on the authorisation profile of the user. The only way i can think of is:
- Write ABAP to look up into the security mapping tables.
- Convert the ABAP report into RFC-Enabled FM. The selection variables will be part of the import/export parameters of FM and table can be used to display the result.
- Create HTML template using WAD, write Java Script to call the FM and map the import/export parameter. Display the result in Table.
But i don't know How to use the Java Script to call Function Module (FM) and get back the authorization through parameter.
Is anyone know about it or is there any other method to do it? I can't find any solution and it is very critical for me.
Any help is highly appreciated.
RajatHi Rajat,
Do you mean that you want certain users to be able to use only certain web items? I think you can use the libraries for that and assign them to roles:
http://help.sap.com/saphelp_nw04/helpdata/en/4e/0f813b420ce60ee10000000a114084/content.htm
Hope this helps... -
Previous configuration: Shared profiles located at D:\profiles\ on PC1 (XP Pro SP3). 2nd PC (PC2 also XP Pro SP3) mapped to \\PC1\Profiles via mapped drive P: and using absolute reference in profiles.ini on PC2. Remote profiles work OK on PC2.
New PC added (PC7) to eventually replace PC1 (Windows 7/32 Pro). Profiles moved to D:\Profiles on that box. Firefox and Thunderbird work fine on PC7 with the local profiles. Profiles.ini edited on PC1 to point to the network share and will not access the remote profiles. Access permissions are set to full for everyone. I can write and edit to files in the profile directories from PC1.
I tried adding a profile with the profile manager and tried to force it to use the network share, but it still located the new profile down in the default directory ...\application data\Mozilla\Firefox\Well, try this (I was able to fix my with these steps):
Go Utilities > Disk Utility
Select your Startup Disk, e.g. Macintosh HD
Then, under the First Aid Tab, click Verify Disk Permissions.
If there are errors, then click repair Disk Permissions.
After it is done, restart the computer and see if your problem is resolved.
I hope this help.
Zeke
www.ZekeYuen.com/blog/ -
Maps app not working on Network Users
Maps app not working on network users on client machines?, is everyone having same issue?, Thanks in Advance
Sometimes it does, sometimes it does not. I assume we're talking about network users with home folders on a remote volume…
The only thing I could do about it was to inform Apple… -
Mapping Help for replacing source value
Mapping Help for replacing source value
Posted: Mar 14, 2006 1:06 AM Reply
Hi all,
I am unable to do transform the source value to required target value,
From Source ADDRESS_TYPE = 'HOME' should be replaced with 03 to target field ANSSA, and 'MAIL' to be replaced with 05, I am trying to do it but i am unable to handle it, please give u r valuable suggestions,
The source structure is like this,
- <Event ID="239" TRANS_TYPE="ADR">
<PersAddr GEO_LOC_CD="US" EMPLID="29" ADDRESS_TYPE="HOME" EFFDT="02/15/2006" ADDRESS1="92nd Floor" ADDRESS2="812backstreet" ADDRESS3="" ADDRESS4="" CITY="London" COUNTY="" STATE="AN" POSTAL="EC2N 4AG1" COUNTRY="GBR" KEY1="29" KEY2="HOME" KEY3="02/10/2006" />
<PersAddr GEO_LOC_CD="US" EMPLID="29" ADDRESS_TYPE="MAIL" EFFDT="02/15/2006" ADDRESS1="92nd Floor" ADDRESS2="812backstreet" ADDRESS3="" ADDRESS4="" CITY="London" COUNTY="" STATE="AN" POSTAL="EC2N 4AG1" COUNTRY="GBR" KEY1="29" KEY2="MAIL" KEY3="02/10/2006" />
</Event>
REGARDS,
sridharHi,
This can be done using user-defined function as well.
Code the function as...
if(Addr_Type.equals("HOME"))
return "03";
else if(Addr_Type.equals("MAIL"))
return "05";
else
return "Invalid Address Type";
Here, Addr_Type is Input String Argument for this function.
Map this function between ADDRESS_TYPE and ANSSA.
Regards,
Uma
Maybe you are looking for
-
I don't understand how to disable some of the options for Safari 4...
It seems that like a lot of other people here, I'm not that fond about some of the features introduced in the new Safari version; namely, the addition of the Top Sites portion, the removal of the blue loading bar, the relocation of the Refresh button
-
How to Force Canon Pixma MX870 to Print Black
How do you force the MX870 to print black and to use the big black ink tank when printing all text and documents? Is there a specific setting that does this? Isn't the big black tank supposed to be used for text printing and the smaller black tank is
-
I need a configuration setting
i ve tried seting up the configuration setting of my phone but is not working ,i ve gone to nokia website,i ve dnoe it automatically and maually but nor is working and my phone secrity code is been locked by the nokia produe,the defult code is not op
-
Accessing Informatica File Archive Service using its native JDBC driver
Good morning, Using the Informatica ILM suite, we've retired a number of database applications (which ran on Oracle) into the so-called Optimized File Archive, or OFA. The information stored in there can be accessed using their File Archive Service,
-
Task creation using function module
Dear Experts, Im new to workflow. I want to use a function module for defining a task. i created a function module and declared the structures ACTOR_TAB LIKE SWHACTOR AC_CONTAINER LIKE SWCONT with in the function module In the transaction PFAC i give