Protect a document while allowing insertion of data in a table and points on a chart.

I have created a Word document that includes a table and a chart. Can I protect the document but allow entry of data into the table and allow points to be placed on the chart using Adobe?

Hi brianh89327665,
While you can apply a permissions password to a PDF to prevent things such as printing and changing the document, you can't apply it selectively to parts of the PDF.
Best,
Sara

Similar Messages

Insert the data into two tables at a time.

Hi ,
i have these two tables
create table [dbo].[test1](
[test1_id] [int] identity(1,1) primary key,
[test2_id] [int] not null
create table [dbo].[test2](
[test2_id] [int] identity(1,1) primary key,
[test1_id] [int] not null
alter table [dbo].[test1]
add constraint [fk_test1_test2_id] foreign key([test2_id])
references [dbo].[test2] ([test2_id])
alter table [dbo].[test2] add constraint [fk_test2_test2_id] foreign key([test1_id])
references [dbo].[test1] ([test1_id])
I want to insert the data into two tables in one insert statement. How can i do this using T-SQL ?
Thanks in advance.

You can INSERT into both tables within one Transaction but not in one statement. By the way, you would need to alter your dbo.Test1 table to allow null for first INSERT test2_id column
See sample code below:
CREATE TABLE #test1(test1_ID INT IDENTITY(1,1),test2_id INT NULL)
CREATE TABLE #test2(test2_ID INT IDENTITY(1,1),test1_ID INT)
DECLARE @Test1dentity INT
DECLARE @Test2dentity INT
BEGIN TRAN
-- Insert NULL as test2_ID value is unknown
INSERT INTO #test1(test2_ID)
SELECT NULL;
-- get inserted identity value
SET @Test1dentity = SCOPE_IDENTITY();
INSERT INTO #test2(test1_ID)
SELECT @Test1dentity;
-- get inserted identity value
SET @Test2dentity = SCOPE_IDENTITY();
-- Update test1 table
UPDATE #test1
SET test2_ID = @Test2dentity
WHERE test1_ID = @Test1dentity;
COMMIT
SELECT * FROM #test1;
SELECT * FROM #test2;
-- Drop temp tables
IF OBJECT_ID('tempdb..#test1') IS NOT NULL
BEGIN
DROP TABLE #test1
END
IF OBJECT_ID('tempdb..#test2') IS NOT NULL
BEGIN
DROP TABLE #test2
END
web: www.ronnierahman.com

How to insert the data system created table throuch RFC

How can i Insert any data system created table like MARC T100w .... throuh RFC.
I created Funstion module.
MY Email Address : [email protected]
[email protected]

Hello Chandan
It is pure madness to update or modify tables like MARC or T100W directly, whether on remote systems or locally.
If you need to update or modify such tables on remote system search for the appropriate <b>BAPI </b>(e.g. in case of MARC use BAPI_MATERIAL_SAVEDATA).
Regards
Uwe

Insertion of data between 2 tables ( 1 to * relationship )

Hi all, I am new to Oracle ADF, I have a problem with the insertion of data between 2 tables (Table A and Table B), I have the ratio 1 to *, and I need to insert data in table B (* Relationship) when insert in Table A all goes well, but when inserted in Table B, I need the primary key value in Table A () in the value field in table B that is as foreign key.
Ie
Value Table A
coda = 20 -> primary key
Table B values
1 set of values
val_1,
val_2,
val_3,
coda = 20 -> need this value is constant up to do a Commit.
set of values 2
val_1,
val_2,
val_3,
coda = 20 -> need this value is constant up to do a Commit.
How I can do it?
thanks

Thanks for you answers 'M.Jabr'
I was wrong, because the relationship 1 to * between tables A and B, I was writing the groovy expression in each table, in this case in Table B (A.codSolicitude), but now I notice that within the DataControls, but specifically in the control data of Table A, there is a relationship between the board B, and I thought to insert into the related table that appears as a master/detail, and first inset in table A and then in Table B in the same page master/detail, and A.CodSolicitude value is automatically filled in Table B, and performed the Commit and everything works. !
Thanks for you help.
Now if you can give me some examples with images that are on the web similar to this problem would be great:) Thanks!

Fetch data from one table and insert into two tables in desired format

I have similar to the following data in a table and it is not normalized. The groupID is being used to group two records of similar nature.
DECLARE @OldDoc TABLE (oldDocID INT, groupID INT, deptID INT)
INSERT INTO @OldDoc (oldDocID, groupID) VALUES (1, NULL, 111),(2,NULL,111),(3,1,111),(4,NULL,333),(5,1,222),(6,NULL,333),(7,2,222),(8,2,333),(9,NULL,111),(10,3,222),(11,NULL,333),(12,3,444)
I need to process the data from the above table (@OldDoc) and write into two new tables (@NewDoc and @NewDocGroup) as follows.
oldDocID should be stored as newDocID when inserting to @NewDoc table. Only records with groupID NULL and one record (first one) per group should be considered (For example, oldDocID 5 is not considered as 3 and 5 belong to the same groupID 1) for insertion.
DECLARE @NewDoc TABLE (newDocID INT)
INSERT INTO @NewDoc (newDocID) VALUES (1),(2),(3),(4),(6),(7),(9),(10),(11)
All records from @OldDoc should be considered for insertion into @NewDocGroup table. OldDocID is inserted as NewDocID and deptID is as-is. Instead of groupID, the ID of the first record in the
group should be considered as parentNewDocID (For example, 3 is considered as parentNewDocID for newDocID 5 as 3 and 5 belong to the same groupID in @OldDoc table) for the newDocID.
DECLARE @NewDocGroup (newDocID INT, parentNewDocID INT, deptID INT)
INSERT INTO @NewDocGroup (newDocID, parentNewDocID, deptID) VALUES (1,1,111),(2,2,111),(3,3,111),(4,4,333),(5,3,222),(6,6,333),(7,7,222),(8,7,333),(9,9,111),(10,10,222),(11,11,333),(12,10,444)
How do I accomplish the above using SQL ? Thanks for the help.

>> I have similar to the following data in a table and it is not normalized. The group_id is being used to group two records [sic] of similar nature. <<
Rows are not records. Tables have to have a key by definition. You do not do math with identifiers, so they should not be numeric. Let's ignore that error for now. In short, you are posting garbage. If you had followed Forum Netiquette, would you have posted
this?
CREATE TABLE Old_Documents
(old_doc_id INTEGER NOT NULL PRIMARY KEY,
group_id INTEGER,
dept_nbr INTEGER NOT NULL
REFERENCES Departments (dept_nbr));
INSERT INTO Old_Documents(old_doc_id, group_id, dept_nbr)
VALUES (1, NULL, 111),
(2, NULL, 111),
(3, 1, 111),
(4, NULL, 333),
(5, 1, 222),
(6, NULL, 333),
(7, 2, 222),
(8, 2, 333),
(9, NULL, 111),
(10, 3, 222),
(11, NULL, 333),
(12, 3, 444);
>> I need to process the data from the above table (Old_Documents) and write into two new tables (New_Documents and New_Documents_Groups) as follows. <<
Just like punch cards and mag tape data processing! Being old and being new are a status, not another kind of entity. But that is how mag tapes work. And you even use the verb "fetch" from tape files. This design flaw is called attribute splitting.
Do you have a Male_Personnel and Female_Personnel table? NO! It is just Personnel!
>> old_doc_id should be stored as new_doc_id when inserting to New_Documents table. Only records [sic] with group_id NULL and one record [sic] (first [sic; no ordering in a table] one) per group should be considered (For example, old_doc_id 5 is not considered
as 3 and 5 belong to the same group_id =1) for insertion. <<
Think about your punch card mindset. Why did you physically materialize that redundant New_Documents table? Let me answer that: this is how you work with punch cards! In SQL we use a VIEW:
CREATE VIEW New_Documents (new_doc_id)
AS
SELECT old_doc_id
FROM Old_Documents;
>> All records [sic] from Old_Documents should be considered for insertion into New_Documents_Groups table. The old_doc_id is inserted as new_doc_id and dept_nbr is as-is. Instead of group_id, the ID [sic: which identifier??] of the first [sic: tables
have no ordering like a deck of punch cards] record [sic] in the group should be considered as parent_new_doc_id (For example, 3 is considered as parent_new_doc_id for new_doc_id 5 as 3 and 5 belong to the same group_id in Old_Documents table) for the new_doc_id.
<<
Why not use 5 as the parent? My guess is that you are trying to form equivalence classes. See:
https://www.simple-talk.com/content/print.aspx?article=2020
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

How to insert/Update date into Dictionary Table?

Dear Experts,
I have created a Dictionary Project and Deployed.I think the table had created in portal database.
now i want to insert some data into that table?
Can you plz tell me how to access the table using Abstract Portal Component using DynPage.
Waiting for ur replies...
Thanks and Regards,
Visweswar.

Hi
Can u share the Logic???

How to insert Legacy data into QP_RLTD_MODIFIERS table?

How to insert Legacy data into QP_RLTD_MODIFIERS table in R12 instance.

I would use the API QP_Modifiers_PUB.Process_Modifiers for pushing legacy pricing data into R12. QP_RLTD_MODIFIERS is only used for certain types of discounts (in my prod environnment, only promos have data in this table).

How to insert text data into temp tables....

Dear All,
I have one notepad with three columns, first column is segment1, second column is segment2 & third column is price list....
and there is no delimiter and exact spaces..(i.e, zizak fomat)
Ex:-
xx yy 00009999
kk mmmm 00009333
Data is available like above example...So, I need to insert this data into one table.(2LAKSHS OF RECORDS AVAILABLE IN THAT NOTEPAD)
So, Any can one help me, how to insert this kind of text data into temparory table...
Regards
Krishna
Edited by: user12070109 on May 29, 2010 9:48 PM
Edited by: user12070109 on May 29, 2010 9:49 PM

Hello,
What manu suggested this can be done through oracle forms.
If as i read your last post you are using that in database it will not work in db. Try to use the same process in oracle forms will work by making some changes.
And if you don't want to use forms then there is one way using SQL LOADER. It required control file to execute for uploading data.
See the below link.
http://www.orafaq.com/wiki/SQL*Loader_FAQ
In this example its showing filename.csv you can use your file name like yourfilename.txt.
So your control file will look like this...
load data
infile 'file_path\file_name.txt'
into table table_name -- use actual table name where you want to upload data
fields terminated by " " -- Here using spaces as you mentioned
(column1, column2, column3) -- Here use the three column names of tableAnd after creating control file with the above code. You can call it in command prompt like this
sqlldr username/password control=control_file_path\control_file_name.ctl log=log_file_path\log_file_name.log
or
sqlldr username/password@dbconnection control=control_file_path\control_file_name.ctl log=log_file_path\log_file_name.log
Before doing this practice make sure SQLLDR.exe availabe in the machine where you have to execute. Otherwise you will have to install db client for using sqlldr.exe
-Ammad

Can i change or modify or insert the data in standard tables

hi gurus
can i change /modify/insert the data in standard tables
witout using module pools
plz send the progem lines also
it ll be very helpful to me
thank you
kals.

Hi Kalyan,
It is not advisable to update standard tables directly or through your own module pool programs also. The reasons are,
1. It is difficult to find out how many tables are updated through the transaction. if we leave one table also as Mr.Andrew said data integrity will be lost.
2. Authorization objects and profiles will be totally bypassed if data is inserted through custom programs.
3. Complete data validation is not possible. There are certain validations that are executed through code and appropriate errors and warnings are shown in the transactions. If we insert data directly to the tables anything can be inserted into the table field violating all the validations unless we have field level check constraints on the tables at database level.
4. User Exits and BADIs that are implemented for specific business requirements and checks will not function on the data.
5. Update & Transaction locks will not work properly.
Due to above reasons, definitely you should avoid updating standard tables directly.
There are many tools such as LSMW Recordings, BDCs, BAPIs, IDOCs, Upload Interfaces available in SAP through which bulk data can be updated without using relevant transactions.
You can collect data from end users in text or excel sheets or through custom programs in required format and upload at once through above mentioned tools.
Regards,
Hema

How to apply data into 2 tables AND to more than one record in same table?

Hello,
I am trying to apply/insert data into 2 tables AND at the same time apply data to more than one record (in the same table). How would I do this in APEX?
I have updated using one table with no problem, however, when I try updating with the two tables/ multiple record sets, I get errors.
I appreciate the help.
Thanks.
Linda

You can achieve what you want using PL/SQL. Can you post ur code?

How to import data into taxonomy tables and qualified tables

Hi ALL,
Can anybody suggest to import data into taxonomy tables and qualified tables, when is value mapping neccessary and what is partitioning? and what is the use of that partioning?

Hello rehman
even i am facing same issue regading import of data in taxonomy table
. can we do it through import manager.
please provide me some details i will be very very thankful to u
my email - [email protected]
Thanks & regards
Himanshu

Pull data from SQL Table and display it in mail

I have a requirement to pull the data from SQL table and send it in email. Currently I am sending the hard coded info in email but is it possible to pull some data from SQL Table and than format it and send it across in the same email?
Can you guide me with steps on this.
Neil

There are several ways to do this. First is to populate a file in a data flow and then send that as an attachment in the send mail task.
As far as including the results in the email body this becomes a bit trickier. To use a variable you would need to use an SSIS variable type of
Object, this is similar to a collection in .NET. The problem once the object is populated is that it isn't like a readable result set, but again more like an array or a collection. There is no native method to take the object variable and
specify .ToString() or cast its results as text. You would need to iterate through each row and append it to another variable of type string, this could be done with a script task or ForEach container.
Also you mentioned formatting the results. What type of formatting were you looking for. A limitation of the SMTP send mail task is that the message body doesn't support HTML so if you were looking at creating a table within the mail body you
would have to use a script task or a custom component
David Dye My Blog

Extract data from database tables and download in pdf and csv

extract data from database tables and download in pdf and csv
hi how can i re-write my old form procedure in adf java. the procedure used to extract data from diffirent table and dowload the data in pdf and csv.am not downloading image, i what to extract data from diffirent tables in my database and download that data in pdf and csv. i would like to write this in java adf.i just what direction am not asking anyone to do my work this is my learning curve
the form code is
function merge_header3 return varchar2 is
begin
     return '~FACILITY DESCRIPTION~ACCOUNT NO~BRANCH CODE~BANK REF NO.~P/P/ AMOUNT~Postal Address 1~Postal Address 2~Box Postal Code~Dep. Date~Month~BANK NAME~BRANCH NAME~ACCOUNT TYPE~DESCRIPTION~OBJECTIVE DESCRIPTION';
end;
procedure download_file (i_pbat integer) is
dir varchar2(80);
file_name1 varchar2(80);
file_name2 varchar2(80);
appl_code varchar2(80);
fil1 client_text_io.file_type;
fil2 client_text_io.file_type;
dat varchar2(1000);
DATA VARCHAR2(1000);
bvspro varchar2(100);
ssch   varchar2(100);
bvspro_total number(20,2);
ssch_total   number(20,2);
grand_total number(20,2);
cnt    integer;
cursor pbat is
     select *
     from sms_payment_batches
     where id = i_pbat
cursor pay (pb_id integer) is
     select *
     from sms_payment_vw
     where pbat_id = pb_id
     order by subsidy ASC,programme,beneficiary_name
cursor cgref (low varchar2) is
     select *
     from cg_ref_codes
     where rv_domain ='SMS'
     and rv_low_value = low
success boolean;
begin
     set_application_property(cursor_style,'busy');
     appl_code := sms_global.ref_code('SMS','APP_CODE','SMS',0);
    dir       := sms_global.ref_code('SMS','PAY_DIR','c:\sms\batch_payments',0);
         success := webutil_file.create_directory(dir);
     if webutil_file.file_is_directory(dir) then
         null;
--         message ('directory exists');
    else
--                  message ('create directory ');
         success := webutil_file.create_directory(dir);
--         if success then        message ('directory exists');    end if;
    end if;
    for c_pbat in pbat loop
         file_name1 := dir ||'\' || appl_code||c_pbat.batch_number||'-'||to_char(c_pbat.batch_dt,'yyyymmdd')||'pay.txt';
         file_name2 := dir ||'\' || appl_code||c_pbat.batch_number||'-'||to_char(c_pbat.batch_dt,'yyyymmdd')||'merge.txt';
--message('create files ');
--         fil1 := client_text_io.fopen (file_name1,'W');
--         fil2 := client_text_io.fopen (file_name2,'W');
    fil1 := client_text_io.fopen (file_name1,'W','');
    fil2 := client_text_io.fopen (file_name2,'W','');
               dat :=                       'FROM ACCOUNT NUMBER'
                                                            ||'~'||'FROM ACCOUNT DESCRIPTION'
                                                            ||'~'||'MY STATEMENT DESCRIPTION'
                                                            ||'~'||'BENEFICIARY ACCOUNT NUMBER'
                                                            ||'~'||'BENEFICIARY SUB ACCOUNT NUMBER'
                                                            ||'~'||'BENEFICIARY BRANCH CODE'
                                                            ||'~'||'BENEFICIARY NAME'
                                                            ||'~'||'BENEFICIARY STATEMENT DESCRIPTION'
                                                            ||'~'||'AMOUNT';
         --     client_text_io.put_line(fil1,dat);
         bvspro:= null;
         ssch := null;
         cnt := 0;
         dat := '~'||lpad('~',16,'~');
         for c_pay in pay(c_pbat.id) loop
--message('cpay loop ' || cnt);
           if bvspro is null then
                 dat := lpad('~',16,'~');
                 dat := utility.put_field(1,c_pay.programme,dat,'~');
           client_text_io.put_line(fil2,dat);
           dat := utility.put_field(1,c_pay.subsidy,dat,'~');
           client_text_io.put_line(fil2,dat);
           dat := merge_header3;
                 client_text_io.put_line(fil2,dat);
                 bvspro := c_pay.programme;
                 ssch := c_pay.subsidy;
                 grand_total := 0;
                 bvspro_total := 0;
                 ssch_total := 0;
           end if;
           if bvspro <> c_pay.programme then
                 dat := lpad('~',16,'~');
                 dat := utility.put_field(5,ssch_total,dat,'~');
                 dat := lpad('~',16,'~');
                 dat := utility.put_field(5,bvspro_total,dat,'~');
           dat := utility.put_field(1,'Total:' || bvspro,dat,'~');
                 client_text_io.put_line(fil2,dat);
                 dat := lpad('~',16,'~');
           client_text_io.put_line(fil2,dat);
                 dat := utility.put_field(1,c_pay.programme,dat,'~');
           client_text_io.put_line(fil2,dat);
                 bvspro := c_pay.programme;
           dat := utility.put_field(1,c_pay.subsidy,dat,'~');
           client_text_io.put_line(fil2,dat);
           dat := merge_header3;
                 client_text_io.put_line(fil2,dat);
                 bvspro := c_pay.programme;
                 ssch := c_pay.subsidy;
                 bvspro_total := 0;
                 ssch_total := 0;
                 cnt :=0;
         end if;
           if ssch <> c_pay.subsidy then
                 dat := lpad('~',16,'~');
                 dat := utility.put_field(5,ssch_total,dat,'~');
                 dat := lpad('~',16,'~');
           client_text_io.put_line(fil2,dat);
           dat := utility.put_field(1,c_pay.subsidy,dat,'~');
           client_text_io.put_line(fil2,dat);
           dat := merge_header3;
                 client_text_io.put_line(fil2,dat);
                 ssch := c_pay.subsidy;
                 ssch_total := 0;
                 cnt :=0;
         end if;
        bvspro_total := bvspro_total + c_pay.amount;
        ssch_total   := ssch_total   + c_pay.amount;
              grand_total := grand_total + c_pay.amount;
        cnt := cnt +1;
--message('bfore write file 2 ' );
        client_text_io.put_line(fil2
                               ,cnt
                        ||'~'|| c_pay.beneficiary_name
                                                            ||'~'||c_pay.BENEFICIARY_ACCOUNT_NUMBER ||''
                                                            ||'~'||c_pay.BRANCH_CODE             ||''
                                                            ||'~'|| c_pay.BENEFICIARY_STATEMENT_DESC
                                                            ||'~'|| c_pay.AMOUNT
                        ||'~'|| c_pay.address_line1
                        ||'~'|| c_pay.address_line2
                                                ||'~'|| c_pay.postal_code
                                                ||'~'|| TO_CHAR(c_pay.deposit_date,'DD-Mon-YYYY')
                                                ||'~'|| c_pay.month
                                                ||'~'|| c_pay.bank
                                                ||'~'|| c_pay.bank_branch
                                                ||'~'|| c_pay.account_type
                                                ||'~'|| c_pay.subsidy
                                                ||'~'|| c_pay.programme)
              DATA :=                                  c_pay.FROM_ACCOUNT_NUMBER
                                                            ||'~'||c_pay.FROM_ACCOUNT_DESCR
                                                            ||'~'||c_pay.MY_STATEMENT_DESCR
                                                            ||'~'||c_pay.BENEFICIARY_ACCOUNT_NUMBER
                                                            ||'~'
                                                            ||'~'||c_pay.BRANCH_CODE
                                                            ||'~'||c_pay.BENEFICIARY_NAME
                                                            ||'~'||c_pay.BENEFICIARY_STATEMENT_DESC
                                                            ||'~'||c_pay.AMOUNT;
        DATA := REPLACE(DATA, ',' , ' ' );
        DATA := REPLACE(DATA, '~' , ',' );
--message (cnt ||' ' || data);
--message('bfore write file 1 ' );
              client_text_io.put_line(fil1, data);
         end loop;
--message ('end of write');
             dat := lpad('~',16,'~');
             dat := utility.put_field(6,ssch_total,dat,'~');
             dat := lpad('~',16,'~');
       dat := utility.put_field(1,'Total:' || bvspro,dat,'~');
             dat := utility.put_field(5,bvspro_total,dat,'~');
          client_text_io.put_line(fil2,dat);
          dat := lpad('~',16,'~');
       client_text_io.put_line(fil2,dat);
       dat := utility.put_field(1,'Grand Total:' ,dat,'~');
             dat := utility.put_field(5,grand_total,dat,'~');
          client_text_io.put_line(fil2,dat);
         -- close file
for i in 1..50 loop
       if substr(i,-1) = 0 then
             message ('flush ' || i);
       end if;
              client_text_io.put_line(fil1, lpad(' ',2000));
              client_text_io.put_line(fil2, lpad(' ',2000));
              client_text_io.put_line(fil1, lpad(' ',2000));
              client_text_io.put_line(fil2, lpad(' ',2000));
end loop;
         client_text_io.fclose(fil1);
         client_text_io.fclose(fil2);
    end loop;
   set_application_property(cursor_style,'default');
    exception
         when others then
              message(sqlcode ||' ' ||sqlerrm);
   end download_file;    i try this but this code onlydownload image not data from database tables
    public void downloadImage(FacesContext facesContext, OutputStream outputStream)
        BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
        // get an ADF attributevalue from the ADF page definitions
        AttributeBinding attr = (AttributeBinding) bindings.getControlBinding("DocumentImage");
        if (attr == null)
            return;
        // the value is a BlobDomain data type
        BlobDomain blob = (BlobDomain) attr.getInputValue();
        try
        {   // copy the data from the BlobDomain to the output stream
            IOUtils.copy(blob.getInputStream(), outputStream);
            // cloase the blob to release the recources
            blob.closeInputStream();
            // flush the output stream
            outputStream.flush();
        catch (IOException e)
            // handle errors
            e.printStackTrace();
            FacesMessage msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, e.getMessage(), "");
            FacesContext.getCurrentInstance().addMessage(null, msg);
        }

You should ask your forum in the ADF-forum.

Import data from few tables and export into the same tables on different db

I want to import data from few tables and export into the same tables on different database. But on the target database, additional columns have been added
to the same tables. how can i do the import?
Its urgent can anyone please help me do this?
Thanks.

Hello Junior DBA,
maybe try it with the "copy command".
http://download.oracle.com/docs/cd/B14117_01/server.101/b12170/apb.htm
Have a look at the section "Understanding COPY Command Syntax".
Here is an example of a COPY command that copies only two columns from the source table, and copies only those rows in which the value of DEPARTMENT_ID is 30:Regards
Stefan

How to retrieve data from catsdb table and convert into xml using BAPI

How to retrieve data from catsdb table and convert into xml using BAPI
Points will be rewarded,
Thank you,
Regards,
Jagrut BharatKumar Shukla

Hi,
This is not your requirment but u can try this :
CREATE OR REPLACE DIRECTORY text_file AS 'D:\TEXT_FILE\';
GRANT READ ON DIRECTORY text_file TO fah;
GRANT WRITE ON DIRECTORY text_file TO fah;
DROP TABLE load_a;
CREATE TABLE load_a
(a1 varchar2(20),
a2 varchar2(200))
ORGANIZATION EXTERNAL
(TYPE ORACLE_LOADER
DEFAULT DIRECTORY text_file
ACCESS PARAMETERS
(FIELDS TERMINATED BY ','
LOCATION ('data.txt')
select * from load_a;
CREATE TABLE A AS select * from load_a;
SELECT * FROM A
Regards
Faheem Latif

Protect a document while allowing insertion of data in a table and points on a chart.

Similar Messages

Maybe you are looking for