Proxy not working for a while

Hi All,
We are facing a strange problem while proxying from sun one webserver 6.0 to weblogic 8.1sp4,
The application deployed able to run for a while from browser and stops responding for some time, This is getting repeated atleast once in day, and problem goes away with out any restarts.
NSAPI plugin error, no Backend servers error we get when application stops responding, and below is log file from sun one webserver.
[17/Feb/2009:02:33:45] failure ( 1571): for host 171.160.100.23 trying to GET /j
ira/browse/CSP-1099, wl-proxy reports: exception occurred for backend host '171.
189.219.30/7663': 'READ_TIMEOUT [os error=0, line 199 of Reader.cpp]: no read a
errors
also even weblogic console takes a long time to come up.
I wonder this would be problem with network, if to confirrm this and tune, so what would be steps to resolve such type of issues, please help me as this is happening for prod.
Magnus.conf entries
Init fn="load-modules" funcs="wl_proxy,wl_init" shlib="/usr2/netscape/server61/p
lugins/wls81/libproxy.so"
Init fn="wl_init"
Obj.conf entry
<Object name="mbs-jira" ppath="*/jira/*">
Service fn="wl_proxy" WebLogicHost="cltmbszpwl30.bankofamerica.com" WebLogicPort
="7663"
</Object>
Thanks
-Suresh

Hello All,
Thanks for all to the update,
Hi Ameer,
yes there was dump raised which i have already mentioned above ,and more over this got generated when i tested that interface from SE37...
" Run time Error : CALL_FUNCTION_REMOTE_ERROR "..
Hi Prasanthi
I have got confirmation from the developers that they have not edited this interface from past three months, and more over this is running for a while in a day and not for some time..
And comming to scenario wise..
when i check in CC monitoring for this particular service it shows the error which i mentioned above "Sender agreement not found in the channel ".
If we suppose that sender agreement not maintained in the channel ,then hw come it is working some time and not for some times in a day..
And more over developers are complaining that this is not working when performing a test...
Hi Agasthuri,,
Yes there are altogether 3 servers( 1 CI + 2 Appl ) in both systems CP1(CRM) & XP0(XI).
Hi Prateek
I have already performed a Full Cache Refresh and restarted the sytem(XI) also for this particular problem..
Now the main concern is why is it showing that particular error "Sender Agreement not found in channel " in CC monitoring for a while...and after restart of that service it gets disappeared..And then later again the same error is seen in CC monitoring...for that service..
Best Regards
Rakesh Reddy

Similar Messages

HR_INFOTYPE_OPERATION not Working for IT0002 while Hire

Hi all ,
we have created a report which picks the file from the Application Server for creating Employee in HR.
First created Position and Used FM 'HR_PAD_HIRE_EMPLOYEE' to create Employee Pernr.
After which I have used 'HR_INFOTYPE_OPERATION' for creating records in IT such as 2,6,8,14,22,105,185.
Expect 2,6,185 everything works fine.
I have debugged the FM 'HR_INFOTYPE_OPERATION' ( Parameters are correct ) it returns nothing. No Error .
Kindly assist.
Jerome.J

Using user program is not advised to hire/maintain an employee, because FM 'HR_INFOTYPE_OPERATION' does not do all the validation/subsequent update performed in PA40/PA30 txn program module.
1. Create an Excel file with the data required for each infotype in the same order as a hiring action and save as a *.txt file.
2. Create a batch recording from PA40 transaction for hiring an employee
3. Create a LSMW object using the batch recording from step 2.
4. Test the LSMW object thoroughly using the file from step 1 above
5. Save in a transport, the objects from steps 2 & 3 above
6. Move the transport to Test system; Test again here with more data as in 1 above
7 Move the transport to prod system
In production system:
8. With small no. of employee data (as in step 1), run the LSMW action.
Display the data created.
9. If everything is OK, you may proceed with the rest; if it is a large number of employees, you may split the LSMW run to a few batches.
Alternatively, use 3rd party s/w e.g. INFO SHUTTLE, etc.

Safari will work for a while, then slows to "Spinning Ball of Death" & typing jumps, erases & may not space

I have a 10.5.8 Macbook, Leopard & almost exclusively use Safari. Got it in November of 2008. (Trackpad Clicker has not worked for ages. I have to use a mouse.)
Also, just recently, when using the keyboard to type, I may lose most if not all that I just typed, sometimes it doesn't space or move down more than to next line & often when I hit a symbol key, the cursor may end up anywhere.
For ages it has been doing what is stated in Subject/Question.
I can use it for a while, frequently clear Safari Cache. (Can't seem to clear Home->Library->Cache anymore. Much in there, but I fear that with the problems that I have had with this Mac since the first year that I will remove something that is necessary & really shouldn't be in that Cache. I did do it a few times way back, but it won't even let me move things to trash anymore.
I know that I need a new Macbook, but I can't afford one & really need larger than a 13" screen, as I have 3 different eye problems. My friend got a deal on a "bells & whistles" Toshiba 17" laptop during "Black Friday" for something over $400. Something comparable in a Macbook would be ~$2,800-2,900 plus tax!!! Ridiculous. I got a Mac to not have to deal with viruses & the like & to have one like my musician friend who needed direction with a computer & wanted a Macbook because of the "Garage Band". I bought mine ~3months after he bought his & wouldn't you know, mine is a Leopard & his a Tiger AND they had upgraded "Garage Band" on mine... so, nothing in common.
I have had nothing but trouble with my macbook since 1 year after I got it. As I was trashing what should have been "unsaved" & "saved" downloads, I happened to have my iPhoto open & near the end, I walked by to see all of my photos & documents disappearing to trash. Nothing has been the same since. The "Genius" was rude & no one could tell me what went wrong or fix my problem. I had over 8,000 items that were no longer in folders or albums or anything. All that was done was to move them from my trash to desktop to ONE folder for which I was left to deal. (Possibly go back to that time in my Time Machine??? But don't really know how to "pick out" all that was good, leave out the "mess" & still have all the new that I have done in the past 2.5 years??)
I had paid for 1 year of classes AND for the 3 year coverage & APPLE CARE. I was on the phone with those guys for hours & hours & months on end to NO avail. I am not a "happy camper". I think that they owe me a new one, even after all this time. My intent was to write them a very long detailed letter, but lightening has struck my house & fried all my components EXCEPT this "P.O.S", which would have been paid for by the Insurance company... Argh. And then my freezer went out & the new one was "DOA" & I have been fighting them & my dog has been lame for a year now, & I am a non-practicing vet, because of debilitating Depression. It has been over 10 months & my roof & chimney are still not repaired. I know... "TMI", but I guess I am venting to let you know why I haven't addressed Apple about my "P.O.S" macbook.
Any help wrt new WARNING message,(previous question), Safari winding down every time after some use, why my keyboard is going nutso & what to do about all the 1000's of files that are in my Macbook, (I thought that we moved most of them to an external HD, My Book. I have one for the Time Machine back up & one for "Storage". But, alas, it seems that most are still in my macbook & there is very little memory & that may well be a big part of my problem.)
Thanks for bearing with this "newbie on here".
I realize now, that this probably should have been at least 3 questions or more, sorry. If I have to redo, I will.
Just wrote a separate one regarding the "WARNING-SUSPECTED PHISHING SITE, every time I click on a new website on Safari.
Thanks to any & all. (Forgive me, if I don't know all the ettiquette & rules of this site. (Be kind & guide me.)

Hello & welcome, let's see if we can help out here!
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?

My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.

My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.

At present I have no power to the Gen 7, so need to get some power to it I think. I pressed the buttons as you suggested, but nothing is showing up at this point. Thank you for your response as the more I can rule out before I take it back the better I think.

My iphone 4s siri is not working, it just worked for a while and stopped. I've checked the data plan and it is intact, i even switched my sim to a friends phone and his siri worked but mine refused even with a wireless network. pls help.

My iphone 4s siri is not working, it just worked for a while and stopped. I've checked the data plan and it is intact, i even switched my sim to a friends phone and his siri worked but mine refused even with a wireless network. pls help.

Troubleshooting Siri
http://support.apple.com/kb/TS4079

Form Designed in LiveCycle will not work for End User

Please Help!
I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms. After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help. So here's the deal:
I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms. The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera. The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken. The second subform is basically an image field and text fields used as photo captions/photo compilation pages. When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)). Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells. I was able to find a script to correctly populate those fields for each instance of the table. Wish I had the form here, but it's at work at the moment.
My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview. I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X). I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly. However, once they save it, it gets all jumbled and they can't even print it. We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work. I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
Anyone have any thoughts on my long explanation?? Please HELLLLPPPP!

The error(s) occur when trying to save the document. I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:" ---> Then click the "Submit" cmd button. That should expand the table. Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table. Then the user will populate each cell of the table on page 1 with data. The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1.
The problem is in the distributing of the form to the user so they can save the form after populating the data. I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos). However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document. Then re-opened the copy in Acrobat Pro X. The new copy:
-had 5 additional rows added to Page 1
-Duplicates of some of the fields
-Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
Again, this all works fine in the LiveCycle Preview but not anywhere else. I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons. I also do not want to distribute this form to end users and then collect the data back from them. I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.

Wake on Demand: Not working for some services, others OK

I haven't been able to figure this problem out... Wake on Demand for a previous generation Mac mini running Snow Leopard 10.6.8 works for things like a CrashPlan automated backup but does not work for things like remote SSH login or Screen Sharing. In all cases, the services are being originated on a latest generation iMac running Mac OS X Lion (10.7.2).
While it's not an earth-shattering event to get off my backside and walk over to the Mac mini across the house to press its Shift key to waken the thing, it gets rather old to have to keep doing so, especially since CrashPlan automated backups are taking place while the Mac mini is otherwise asleep (the sleep indicator is slowly pulsing).
I've been through the Apple tech notes regarding Wake on Demand for Snow Leopard 10.6 and have ensured that AirPort and its network are at the top-most position in their respective lists. Other than that, I'm not sure what else I can do. Wake on Network is enabled in the Snow Leopard Mac mini's network System Preferences and there doesn't seem to be any on/off option in the AirPort Extreme base station (just recently updated to 7.6 firmware).
Any thoughts... hints... suggestions?
One final note: this Mac mini is new as of July 2011; just days before the latest generation of Mac mini came out. It came pre-installed with Snow Leopard and, as soon as the users of this mini find software replacements for the old PPC style applicaitons they're used to using, will be upgraded to Lion. However, I feel a bit unsettled in making the move to Lion if I can't get a Snow Leopard feature to work properly. There's no telling if the Lion upgrade will actually fix this behavior or make it worse.
Thanks in advance.

I don't think you can wake on network with a closed lid. Try keeping the lid open and putting the machine to sleep. Does it work?

Fingerprint utility is not working for normal users - Tecra M11

Hi All,
I installed windows 7 pro in Tecra M11 laptop and the Toshiba finger print utility is not working for normal users.
It is working only for domain administrators. The TFPU is not working for, normal domain users, local users, local administrators. If we run the utility it will ask to enter the windows password and once we applied the password then the message saying "entered password is not valid" will prompt even if we are trying to use the utility first time.
If we try with a domain admin account it will work without any problem. Can somebody help me to trouble shoot this issue?
Thanks.

People nowadays experienced that no matter How many times we glide our finger it have no response.In this instance, you might be very afraid of Windows password lost by reason that there is a plenty of important data on your PC.
Then what should you do? One choose is fix the Fingerprint scanners, but this method will cost a lot of money. The other is use the Windows password function to solve the problem. Certainly, this is a very safer, faster and easier to use method for you.
According my personal experience, you can try these three ways to re-access to your PC:
Method 1: Login with the default administrator account
* Step 1: Start Windows PC
* Step 2: When you can see the Windows login screen, press ctrl+alt+del keys Twice and it'll show Classic Login box
* Step 3: Type Administrator as Username and leave the password field blank
* Step 4: Press the Enter Key and then you can be able to login the default windows administrator account which is it created by default when install windows.
*Note:* This trick is only work for Windows XP. And when you input the key combination Please don't put the cursor on any account. And if you change the name or password before, you cannot login by this way.
Method 2: Use the previous password reset disk
This method describes how to create and use a password reset disk for a computer that is a member of a domain. You can use a Windows password reset disk to gain access to your Microsoft Windows Professional-based computer if you forget your Windows password. Please click here to learn more.
Method 3: Using Windows Password Unlocker
Using Windows password remove software is could be the fastest and easiest way for you to reset your Windows password while you didn't create a password reset disk before.
There are 2 options for you: recover Windows password with a bootable CD/DVD or recover Windows password with a USB flash drive.
Before starting, a bootable CD/DVD or USB flash drive and a computer with CD drive are required. (Internal CD drive and external CD drive are both OK.
Option 1: Recover Windows password by burning a bootable CD/DVD
Option 2: Recover Windows password by burning a USB flash drive
The whole Windows password recovery process can be divided to 3 big steps:
* >> Step 1: Burn a USB flash drive to remove lost Windows password
* >> Step 2: Set your target computer to boot from USB
* >> Step 3: Recover forgotten Windows password with the burned USB flash drive
In fact, all you need is a *Windows Password Unlocker www.passwordunlocker.com/windows-password-recovery.html which can help you directly reset your windows xp password, and then you can login your XP without a password required. Of course, there are also some other ways to do it, but this way may be most convenient one.

Incoming Email not working for one web app, but IS working for others in same farm.

I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates. It works just fine for two web applications, but it will not work for one particular
web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site. The App Pool and Timer
Service accounts have rights to the folder and to the library.
The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
ID:
Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
This did not fix the issue for the case mentioned above.
What could possibly be the issue preventing incoming email from working on this one web application?

Thanks for your reply. Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause. As noted, _other_ emails send to http://workingapp are working just fine. I can send two emails - one to a library on http://workingapp
and another on http://notworkingapp. The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly. In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
So clearly, the timer job on WFE1 is running and attempting to process the file. For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
WRT to #1, I have done this already (as noted in the original post). I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed. If I return it to http://workingapp it is processed. In other
words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library. I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
the alias. Once done, emails sent to the alias are not processed. I then do the reverse, and it works again.
On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp. Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
- the problem is bound to http://nonworkingapp
I'm not sure what you mean by "steps to reproduce the issue". If I knew that, I would probably be able to solve the issue. The best I could come up with to describe the situation would be:
Set up SP 2010 in a three-node configuration with multiple web apps
Enable incoming email and confirm it works
Migrate to a SP2013 SP1 farm in a three node configuration.
Enable a new email alias for a library
Observe that it doesn't work for one web application.
Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result.

Link to HTML DB Studio not working (for me)

Hi,
I tried to link to: http://htmldb.oracle.com/studio and got a page not found. Has this link moved, gone away ( temporarily or otherwise)?
Is there a place to check the staus so I don't bother the Forum list?
Secondly, the links to the HTML DB documentation from: http://htmldb.oraclecorp.com/pls/htmldb/f?p=17718:220:605672891989230178::NO:::
haven't worked for a while. Where could I report that?
Thanks, steve

Just for kicks I downloaded the 1.0.7 tech preview of the HTTP-REST plugin and upgraded one of my 5.5.2 lab machines. I was hoping upgrading an existing working host instead of trying to import the package might yield a different result. It didn't. I got the exact same result which makes me think it must be something in the definition of the host or one of the rest operations that whatever conversion is taking place is choking on. Can anyone point me to a log that might be more revealing than the java error that is getting spit out? I don't see anything super useful in the server log just that error saying "The Validated String is Empty". I have a feeling whatever is going on has been around for a long time but my google skills are not revealing anything.

Links in open tabs just flat stop working for a while with FF4.0

Installed FF4.0 a few days ago - consistent problem (but do not know how to reproduce it on demand):
I routinely have 8-10 tabs open on various forums and web sites I check regularly, but often I do not visit some of them for a day or more. Almost always now when I go to one of those tabs that I have not used for a while, none of the links work on it. Refreshing the tab does nothing, no links work. But the tabs I have been using recently still work fine, and new tab open and work OK. I have NEVER seen this problem before with any of the various FF3 versions.
If I play with it long enough by trying various links, refresh, opening new tabs, and whatever else comes to mind, it seems to finally wake up after about 15 minutes or so. This problem has happened to me at least once a day, every day, for the past week or so since I upgraded to 4.0. When it happens, it is not just one tab - it is ALL of the open tabs that I have not used in a while, but any that I have been regularly checking that day continue working fine. Very irritating.

You can try to disable hardware acceleration in Firefox (you need to close and restart Firefox).
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that helps.

My trackball/mouse hangs! They work,then they don't. If I switch usb ports they work for a while.

I have a Pavilion a1657c using Windows XP. I use a Kensington trackball and lately it has been hanging up on me. I switched to a Logitech mouse and it did the same thing. Now, I have both plugged in and if I switch usb ports one of them will work for a short period of time and then hangs. If I switch usb ports again, one of them will work for a while....I never know which one is going to work..very sporadic and it is driving me nuts. I am semi-literate with computers, but no whiz. Somebody help me of this road to nutsville..?

Hello icnhndlu, This appears to be a USB common issue, since you mention the issue occurs on different USB ports and devices.
This may be a hardware fault, but you might try uninstalling all the USB devices in the Control Panel, Device Manager. Then reboot the system and see if the operating system will detect new hardware and install the drivers for the new hardware.
The drivers are provided by Microsoft within the operating system.
Not sure this will work, but may be worth a try.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

We can't use any of app in Myanmar ! If someone send me with Myanmar font, my phone stop working for a while . Can u help us ? Like .. Adding Myanmar font :)

When I used iOS4.3.3 , my phone did not stop working for a while although I can't see in Myanmar font!

Apple has not yet included a Myanmar font in iOS, and there is no way for users to add one. You can search the app store for "myanmar" or "burmese" to see if there are some apps that may be useful for some purposes.
The best place to ask Apple to add new features is
http://www.apple.com/feedback/iphone.html
For the freezing problem with Myanmar language material, see
https://discussions.apple.com/thread/4544080

OOF not working for mailboxes homed on Exchange 2010 server during migration

Hi There
I'm troubleshooting an issue during a exchange 2010 to exchange 2013 migration where the OOF is not working for users homed on the exchange 2010 mailbox servers. This applies to users using outlook 2010 and outlook 2013 .OWA works perfectly and you can also
enable OOF via exchange powershell.
Users homed on the exchange 2013 servers does not have any issues.
The exchange 2010 servers is on SP3 rollup 4 and the 2013 servers on SP1 only without any rollups installed.
So my question will be - have anyone experienced this issue during migration and will patching the exchange 2010 servers to rollup 5 or 6 and the exchange 2013 to sp1 rollup 5 fix the OOF issue then? If requested the client to patch to these levels, but
in the meantime I'm checking if anyone else had similar issues.
Any pointers will be welcome.

Hi ,
1.Please check the problematic exchange 2010 user account can able to access the ews virtual directory internal url and you can check that via browser's.It will prompt for the user name and password , please provide that .
EWS url wopuld be like - https://mail.youdomain.com/EWS/Exchange.asmx
2.Then the second step would be autodiscover check for the problematic user account.you can find that via test email configuration .There you came to know whether outlook is fetching up the proper url for ews and autodiscover.
3.Then please un check the proxy settings in browsers and check the same.
4.please use the command to check the auto discover
test-outlookwebservices
Please check the below links also.
http://exchangeserverpro.com/exchange-2013-test-outlook-web-service/
http://www.proexchange.be/blogs/exchange2007/archive/2009/07/14/your-out-of-office-settings-cannot-be-displayed-because-the-server-is-currently-unavailable-try-again-later.aspx
http://port25guy.com/2013/07/20/user-cannot-set-an-out-of-office-in-exchange-20102013-or-eventid-3004-appears-in-your-event-log/
http://www.theemailadmin.com/2010/06/exchange-server-2010-out-of-office/
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Hyphenation not working for Russian language

Hello All,
We really shocked to see that hyphenation not working for Russian language, anyone faced this issue? Please let us know how to rectify this issue since we need to complete one of the project with Russian language.
Thanks in advance.
Praveen

@Kasyan: Thanks for the response, I'm using 5.5 and facing this issue while select the language 'Russian' no where found the hyphens and in most of the places looks loose line due to missing of hyphens.
Could please confirm again?
Thanks,
Praveen

Proxy not working for a while

Similar Messages

Maybe you are looking for