Proxy server 3.6 question

DEAR ALL,
I have two questions regarding proxy server 3.6:
1. I would like to know the Maximum number of simultaneous requests a proxy server can hold.
2. Maximum number of simultaneous connections a proxy server can hold.
Thanks alot,
Scotty

Determined by the value of MaxProcs.

Similar Messages

Questions Tags Users Badges Unanswered Ask Question 502 - Web server received an invalid response while acting as a gateway or proxy server while accessing wcf hosted in azure

I have just a simple WCF service and which is protected by azure ACS .I am getting this error while trying to invoke the service from a client.The WCF is hosted as a simple azure website.
502 - Web server received an invalid response while acting as a gateway or proxy server
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
This is my web.config for the service and I am guessing there is something wrong with it .It is working just fine on local IIS so I am not sure what exactly is causing the issue.Can someone please have a look and see if they can find something or point me to
a direction.
<?xml version="1.0"?>
<configuration>
<configSections>

<section name="system.identityModel" type="System.IdentityModel.Configuration.SystemIdentityModelSection, System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<section name="system.identityModel.services" type="System.IdentityModel.Services.Configuration.SystemIdentityModelServicesSection, System.IdentityModel.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
</configSections>
<system.diagnostics>
<trace>
<listeners>
<add type="Microsoft.WindowsAzure.Diagnostics.DiagnosticMonitorTraceListener, Microsoft.WindowsAzure.Diagnostics, Version=2.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
name="AzureDiagnostics">
</add>
</listeners>
</trace>
</system.diagnostics>
<appSettings>
<add key="aspnet:UseTaskFriendlySynchronizationContext" value="true" />
</appSettings>
<system.web>
<authentication mode="None"/>
<customErrors mode="Off"></customErrors>
<compilation debug="true" targetFramework="4.5" />
<httpRuntime targetFramework="4.5"/>
</system.web>
<system.serviceModel>
<services>
<service name="SidService.Service1">
<endpoint address="https://sidwcfservice.azurewebsites.net/sidservice.svc"
binding="ws2007FederationHttpBinding"
contract="SidService.IService1" />
</service>
</services>
<bindings>
<ws2007FederationHttpBinding>
<binding closeTimeout="10:10:10" openTimeout="10:30:00" sendTimeout="10:30:00" receiveTimeout="10:30:00"
bypassProxyOnLocal="false" transactionFlow="false" maxBufferPoolSize="20000000" maxReceivedMessageSize="20000000" >
<security mode="TransportWithMessageCredential">
<message establishSecurityContext="true" negotiateServiceCredential="true" issuedKeyType="BearerKey">
<issuer address="https://sidaccess.accesscontrol.windows.net/v2/wstrust/13/certificate"></issuer>
<issuerMetadata address="https://sidaccess.accesscontrol.windows.net/v2/wstrust/mex" />
</message>
</security>
</binding>
</ws2007FederationHttpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior>
<serviceAuthorization principalPermissionMode="Always"></serviceAuthorization>

<serviceCredentials useIdentityConfiguration="true"></serviceCredentials>
<serviceMetadata httpGetEnabled="true" httpsGetEnabled="true"/>

<serviceDebug includeExceptionDetailInFaults="true"/>
<serviceSecurityAudit auditLogLocation="Application" serviceAuthorizationAuditLevel="Failure" messageAuthenticationAuditLevel="Failure" suppressAuditFailure="true"/>
</behavior>
</serviceBehaviors>
</behaviors>
<protocolMapping>
<add binding="basicHttpsBinding" scheme="https" />
<add binding="ws2007FederationHttpBinding" scheme="https" />
<add binding="basicHttpBinding" scheme="http" />
</protocolMapping>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="false" />
</system.serviceModel>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true">
<add name="WSFederationAuthenticationModule" type="System.IdentityModel.Services.WSFederationAuthenticationModule, System.IdentityModel.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
preCondition="managedHandler" />
<add name="SessionAuthenticationModule" type="System.IdentityModel.Services.SessionAuthenticationModule, System.IdentityModel.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
preCondition="managedHandler" />
</modules>
<directoryBrowse enabled="true"/>
</system.webServer>
<system.identityModel>
<identityConfiguration saveBootstrapContext="true">
<certificateValidation certificateValidationMode="None" revocationMode="NoCheck"/>
<issuerNameRegistry type="System.IdentityModel.Tokens.ConfigurationBasedIssuerNameRegistry, System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<trustedIssuers>
<add name="ACS2SigningCertificate"
thumbprint="DAE85FDA621FC090A8B0583we4380C52E484AE36" />
</trustedIssuers>
</issuerNameRegistry>
<audienceUris>
<add value="https://sidwcfservice.azurewebsites.net/sidservice.svc" />
</audienceUris>
<securityTokenHandlers>
<add type="System.IdentityModel.Tokens.Saml2SecurityTokenHandler, System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</securityTokenHandlers>
</identityConfiguration>
</system.identityModel>
<system.identityModel.services>
<federationConfiguration>
<cookieHandler mode="Default" requireSsl="true" />

<wsFederation passiveRedirectEnabled="true" issuer="https://sidaccess.accesscontrol.windows.net" realm="https://sidwcfservice.azurewebsites.net/" requireHttps="true" />
</federationConfiguration>
</system.identityModel.services>
</configuration>
This is the IIS log
#Software: Microsoft Internet Information Services 8.0
#Fields: date time s-sitename cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Cookie) cs(Referer) cs-host sc-status sc-substatus sc-win32-status sc-bytes cs-bytes time-taken
2014-06-11 05:19:51 SIDWCFSERVICE GET / X-ARR-LOG-ID=f7e6da2f-78f0-4c27-9cae-bb1623d150d6 80 - 98.192.67.81 Mozilla/5.0+(Windows+NT+6.3;+WOW64)+AppleWebKit/537.36+(KHTML,+like+Gecko)+Chrome/35.0.1916.114+Safari/537.36
ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445 - sidwcfservice.azurewebsites.net 200 0 0 210675 863 694
2014-06-11 05:21:07 SIDWCFSERVICE GET /sidservice.svc X-ARR-LOG-ID=dd15d3bc-3307-4b26-8787-1399a5e890ed 80 - 98.192.67.81 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - - sidwcfservice.azurewebsites.net
200 0 0 1800 718 1044
2014-06-11 05:21:08 SIDWCFSERVICE GET /SidService.svc wsdl&X-ARR-LOG-ID=bb415471-866f-48a1-8b7a-e01d4410779e 80 - 98.192.67.81 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445
http://sidwcfservice.azurewebsites.net/sidservice.svc sidwcfservice.azurewebsites.net 200 0 0 2417 878 0
2014-06-11 05:21:16 SIDWCFSERVICE GET /Sidservice.svc wsdl/$metadata&X-ARR-LOG-ID=f5c6415d-9c18-4305-aad5-9cbe4fe16d43 443 - 98.192.67.81 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.34014)
- - sidwcfservice.azurewebsites.net 200 0 0 3458 813 15
2014-06-11 05:21:16 SIDWCFSERVICE POST /Sidservice.svc wsdl/mex&X-ARR-LOG-ID=c2e3eeee-f5d9-49bf-b988-c524679409f3 443 - 98.192.67.81 - - - sidwcfservice.azurewebsites.net 500 0 0 1548 1336 62
2014-06-11 05:21:16 SIDWCFSERVICE GET /Sidservice.svc wsdl&X-ARR-LOG-ID=66bac0fb-476d-4104-bf4b-22d3cd55e906 443 - 98.192.67.81 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.34014)
- - sidwcfservice.azurewebsites.net 200 0 0 8138 793 0
2014-06-11 05:21:16 SIDWCFSERVICE OPTIONS /Sidservice.svc wsdl/_vti_bin/ListData.svc/$metadata&X-ARR-LOG-ID=82bf4ff4-4842-44a6-815e-adb8fdf01d13 443 - 98.192.67.81 - - - sidwcfservice.azurewebsites.net 400 0 0 398 764 31
2014-06-11 05:21:16 SIDWCFSERVICE POST /Sidservice.svc wsdl&X-ARR-LOG-ID=6d7ba68e-67cd-4596-9bf9-861cab3140c2 443 - 98.192.67.81 - - - sidwcfservice.azurewebsites.net 500 0 0 1548 1324 31
2014-06-11 05:21:16 SIDWCFSERVICE GET /SidService.svc xsd=xsd0&X-ARR-LOG-ID=d5890f1b-793e-4b13-9c75-ccd133be1cab 443 - 98.192.67.81 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.34014)
ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445 - sidwcfservice.azurewebsites.net 200 0 0 1688 887 250
2014-06-11 05:21:16 SIDWCFSERVICE GET /Sidservice.svc wsdl/_vti_bin/ListData.svc/$metadata&X-ARR-LOG-ID=e15347e4-a7c0-4512-b3b7-a0ddf8d4ba6b 443 - 98.192.67.81 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.34014)
- - sidwcfservice.azurewebsites.net 200 0 0 3458 857 250
2014-06-11 05:21:16 SIDWCFSERVICE GET /SidService.svc xsd=xsd2&X-ARR-LOG-ID=377aaf45-1c59-4254-a320-6f4028bf8928 443 - 98.192.67.81 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.34014)
ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445 - sidwcfservice.azurewebsites.net 200 0 0 992 887 31
2014-06-11 05:21:16 SIDWCFSERVICE GET /SidService.svc xsd=xsd1&X-ARR-LOG-ID=29fddc12-c18f-42b5-b232-53c9cef6d982 443 - 98.192.67.81 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.34014)
ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445 - sidwcfservice.azurewebsites.net 200 0 0 2701 887 15
2014-06-11 05:27:16 ~1SIDWCFSERVICE POST /diagnostics/settings X-ARR-LOG-ID=984746fe-583c-46f0-a241-2817286262f5 443 - 70.37.162.148 Azure-Portal/4.5.00298.11 - - sidwcfservice.scm.azurewebsites.net 204 0 0 462 1286 234
2014-06-11 05:33:23 SIDWCFSERVICE GET /sidservice.svc X-ARR-LOG-ID=5e5047a3-839b-467d-9d7e-8e79cfe931b7 80 - 98.192.67.81 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445
- sidwcfservice.azurewebsites.net 200 0 0 1800 804 499
2014-06-11 05:33:27 SIDWCFSERVICE GET /Sidservice.svc wsdl/$metadata&X-ARR-LOG-ID=af5d2b66-366f-465b-9b38-b5fa6c49d103 443 - 98.192.67.81 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.34014)
- - sidwcfservice.azurewebsites.net 200 0 0 3458 813 0
2014-06-11 05:33:27 SIDWCFSERVICE POST /Sidservice.svc wsdl&X-ARR-LOG-ID=a93f30b4-289c-4752-9e32-ba4b23cd5590 443 - 98.192.67.81 - - - sidwcfservice.azurewebsites.net 500 0 0 1548 1324 31
2014-06-11 05:33:27 SIDWCFSERVICE POST /Sidservice.svc wsdl/mex&X-ARR-LOG-ID=68505196-ed63-4d65-adf2-af6413f450b6 443 - 98.192.67.81 - - - sidwcfservice.azurewebsites.net 500 0 0 1548 1336 31
2014-06-11 05:33:27 SIDWCFSERVICE GET /Sidservice.svc wsdl/_vti_bin/ListData.svc/$metadata&X-ARR-LOG-ID=8afaa4f2-643e-4534-b8e3-59d2c3755dee 443 - 98.192.67.81 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.34014)
- - sidwcfservice.azurewebsites.net 200 0 0 3458 857 0
2014-06-11 05:33:27 SIDWCFSERVICE GET /Sidservice.svc wsdl&X-ARR-LOG-ID=abb68806-eb59-493f-a727-016115e60357 443 - 98.192.67.81 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.34014)
- - sidwcfservice.azurewebsites.net 200 0 0 8138 793 15
2014-06-11 05:33:27 SIDWCFSERVICE OPTIONS /Sidservice.svc wsdl/_vti_bin/ListData.svc/$metadata&X-ARR-LOG-ID=5e9ebc9a-e0e0-431a-bbb8-02204af9f10e 443 - 98.192.67.81 - - - sidwcfservice.azurewebsites.net 400 0 0 398 764 31
2014-06-11 05:33:27 SIDWCFSERVICE GET /SidService.svc xsd=xsd0&X-ARR-LOG-ID=2c7a504a-3c31-4875-add8-c17fd018ff01 443 - 98.192.67.81 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.34014)
ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445 - sidwcfservice.azurewebsites.net 200 0 0 1688 887 234
2014-06-11 05:33:28 SIDWCFSERVICE GET /SidService.svc xsd=xsd2&X-ARR-LOG-ID=1727b880-7148-4d15-9e9b-0f866def7c2f 443 - 98.192.67.81 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.34014)
ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445 - sidwcfservice.azurewebsites.net 200 0 0 992 887 31
2014-06-11 05:33:28 SIDWCFSERVICE GET /SidService.svc xsd=xsd1&X-ARR-LOG-ID=40fc3543-d6a4-46ce-af1b-5aea83fb86df 443 - 98.192.67.81 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.34014)
ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445 - sidwcfservice.azurewebsites.net 200 0 0 2701 887 110
2014-06-11 05:42:21 SIDWCFSERVICE GET /SidService.svc X-ARR-LOG-ID=70ce2aaa-a11b-4862-878b-2a67bbeb1bc5 80 - 98.192.67.81 Mozilla/5.0+(Windows+NT+6.3;+WOW64)+AppleWebKit/537.36+(KHTML,+like+Gecko)+Chrome/35.0.1916.114+Safari/537.36
ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445 - sidwcfservice.azurewebsites.net 200 0 0 1800 904 46
2014-06-11 05:42:25 SIDWCFSERVICE GET / X-ARR-LOG-ID=4d51ab01-d247-404f-8d78-3bfda8635a3b 80 - 98.192.67.81 Mozilla/5.0+(Windows+NT+6.3;+WOW64)+AppleWebKit/537.36+(KHTML,+like+Gecko)+Chrome/35.0.1916.114+Safari/537.36
ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445 - sidwcfservice.azurewebsites.net 304 0 0 364 961 47
2014-06-11 05:42:34 SIDWCFSERVICE GET / X-ARR-LOG-ID=31d335ef-604f-4653-930f-6f6cf05664b6 443 - 98.192.67.81 Mozilla/5.0+(Windows+NT+6.3;+WOW64)+AppleWebKit/537.36+(KHTML,+like+Gecko)+Chrome/35.0.1916.114+Safari/537.36
ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445 - sidwcfservice.azurewebsites.net 200 0 0 150476 1020 46
2014-06-11 05:42:35 SIDWCFSERVICE GET /favicon.ico X-ARR-LOG-ID=2fe77edb-dcd9-4fc6-b418-8bdcf2313473 443 - 98.192.67.81 Mozilla/5.0+(Windows+NT+6.3;+WOW64)+AppleWebKit/537.36+(KHTML,+like+Gecko)+Chrome/35.0.1916.114+Safari/537.36
ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445 - sidwcfservice.azurewebsites.net 404 0 2 468 971 31
2014-06-11 05:42:39 SIDWCFSERVICE GET / X-ARR-LOG-ID=bf6e0cfb-7e5b-408f-9881-37e236b98a49 443 - 98.192.67.81 Mozilla/5.0+(Windows+NT+6.3;+WOW64)+AppleWebKit/537.36+(KHTML,+like+Gecko)+Chrome/35.0.1916.114+Safari/537.36
ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445 - sidwcfservice.azurewebsites.net 200 0 0 150476 1046 15
2014-06-11 05:42:44 SIDWCFSERVICE GET /SidService.svc X-ARR-LOG-ID=263108d8-4e68-4b52-94bd-5b87186ba45e 443 - 98.192.67.81 Mozilla/5.0+(Windows+NT+6.3;+WOW64)+AppleWebKit/537.36+(KHTML,+like+Gecko)+Chrome/35.0.1916.114+Safari/537.36
ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445 - sidwcfservice.azurewebsites.net 200 0 0 1801 1048 0
2014-06-11 05:57:41 SIDWCFSERVICE GET /sidservice.svc X-ARR-LOG-ID=d2ada703-123a-4842-b480-a150aec1080e 80 - 98.192.67.81 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445
- sidwcfservice.azurewebsites.net 200 0 0 1800 804 967
2014-06-11 05:57:44 SIDWCFSERVICE GET /Sidservice.svc wsdl/_vti_bin/ListData.svc/$metadata&X-ARR-LOG-ID=d53f52a5-8a77-439c-9ae7-cc58842d456f 443 - 98.192.67.81 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.34014)
- - sidwcfservice.azurewebsites.net 200 0 0 3458 857 0
2014-06-11 05:57:44 SIDWCFSERVICE GET /Sidservice.svc wsdl&X-ARR-LOG-ID=31b4a024-c05d-47a6-91dd-1149f28c73bd 443 - 98.192.67.81 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.34014)
- - sidwcfservice.azurewebsites.net 200 0 0 8138 793 15
2014-06-11 05:57:44 SIDWCFSERVICE GET /Sidservice.svc wsdl/$metadata&X-ARR-LOG-ID=68e0c1da-8eb2-4b0d-ad2b-33a88cde8225 443 - 98.192.67.81 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.34014)
- - sidwcfservice.azurewebsites.net 200 0 0 3458 813 0
2014-06-11 05:57:44 SIDWCFSERVICE OPTIONS /Sidservice.svc wsdl/_vti_bin/ListData.svc/$metadata&X-ARR-LOG-ID=9ca1a5ac-d8d3-4a41-bf7a-e118ef3a0e34 443 - 98.192.67.81 - - - sidwcfservice.azurewebsites.net 400 0 0 398 764 31
2014-06-11 05:57:44 SIDWCFSERVICE POST /Sidservice.svc wsdl&X-ARR-LOG-ID=d9142d70-b052-4355-85cf-54a14e96209a 443 - 98.192.67.81 - - - sidwcfservice.azurewebsites.net 500 0 0 1548 1324 15
2014-06-11 05:57:44 SIDWCFSERVICE POST /Sidservice.svc wsdl/mex&X-ARR-LOG-ID=19e8da83-aaaf-4ff8-b5ea-73508c494ac1 443 - 98.192.67.81 - - - sidwcfservice.azurewebsites.net 500 0 0 1548 1336 64
2014-06-11 05:57:44 SIDWCFSERVICE GET /SidService.svc xsd=xsd0&X-ARR-LOG-ID=252dd0dd-1b84-4675-b855-750f69a49d07 443 - 98.192.67.81 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.34014)
ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445 - sidwcfservice.azurewebsites.net 200 0 0 1688 887 234
2014-06-11 05:57:44 SIDWCFSERVICE GET /SidService.svc xsd=xsd2&X-ARR-LOG-ID=cc247b32-9145-4823-9927-d417f12cb360 443 - 98.192.67.81 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.34014)
ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445 - sidwcfservice.azurewebsites.net 200 0 0 992 887 0
2014-06-11 05:57:44 SIDWCFSERVICE GET /SidService.svc xsd=xsd1&X-ARR-LOG-ID=ae402fb1-5caf-4e76-997a-6b2551cb3d49 443 - 98.192.67.81 Mozilla/4.0+(compatible;+MSIE+6.0;+MS+Web+Services+Client+Protocol+4.0.30319.34014)
ARRAffinity=bd0ad669a44c5d1cd8901d2d8014718c9386a2f2ad52bb066cf1cfd489ed6445 - sidwcfservice.azurewebsites.net 200 0 0 2701 887 15

hi,
Firstly, I suggest you could see the same error threads (http://social.msdn.microsoft.com/Forums/windowsazure/en-US/5cf817b3-1295-41d7-b156-ce7aa5e4d11e/502-web-server-received-an-invalid-response-while-acting-as-a-gateway-or-proxy-server?forum=windowsazurewebsitespreview
). And then, I recommend you could refer to this basic code sample(
http://social.technet.microsoft.com/wiki/contents/articles/4027.wcf-soap-service-with-federated-authentication.aspx ). And I recommend you could download this code sample and try to use it(http://code.msdn.microsoft.com/Windows-Azure-AD-Access-0dcde385/sourcecode?fileId=71587&pathId=477793108
Please try it.
hope this helps.
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Upgrade question (iPlanet Web Proxy Server)

Hello List,
What is the procedure for upgrading iPlanet Web Proxy Server 3.6 (beta)
to iPlanet Web Proxy Server 3.6 on Solaris 2.8?
Thank you in advance.
- Andrew Petrov.

Hi
This as per the HTTP/1.1 RFC (RFC2616)
The Connection general-header field allows the sender to specify options that are desired for that particular connection and MUST NOT be communicated by proxies over further connections.
The Connection header has the following grammar:
Connection = "Connection" ":" 1#(connection-token)
connection-token = token
HTTP/1.1 proxies MUST parse the Connection header field before a message is forwarded and, for each connection-token in this field, remove any header field(s) from the message with the same name as the connection-token. Connection options are signaled by the presence of a connection-token in the Connection header field, not by any corresponding additional header field(s), since the additional header field may not be sent if there are no parameters associated with that connection option.
Read the following at
http://www.w3.org/Protocols/rfc2616/rfc2616-sec8.html#sec8.1.3
and
http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.10
Regards
Nagendra HK

Proxy server and or redirction: general question

i would like to setup my network so that all user that see it will have to login and then get access to the internet. i don't know where to start.
on a small scale, using my wireless router, my mac, and the addressed passed out by the router, what do i need? or what do i need to configure?
do i need:
a proxy server? or some kind of configuation on DNS/BIND? kerberos? radius? or just macos x server?
thanks everyone,
g.

Yes, you could use DPS to balance load to both masters. But now you have the same issue where if DPS dies, you lose access. So you could have two DPS behind a hardware load balancer. The admin guide explains how to set all this up.
DS 5.2 and DSEE 6.3.1 are ldap v3 compliant. So if you do go with the DPS route, you can use DPS 5.2 or DPS 6.3.1

Getting Authenticate Proxy Server questions when Installing Flash Player?

Hello all
I am getting the menu below when trying to install Flash Player. This is an old proxy server that I have not used for 3 years. I cannot find anyplace on my computer where this is still referenced. How do I get around this menu and install the Flash Player? Where do I look to find where the installer is pulling this information? None of my browsers are set up to use a proxy server, so I am stumped. I do not use a proxy server and Flash Player will not install without this specific server information. HELP.
Thanks,
Prowler61

Hi Prowler61,
Please refer : http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html

Question on Sun Directory Proxy Server 5.2.4

Hello Guys,
Is it a good idea to have DPS and DS on the same server? Did anyone run into any issues? We have four Sun DS servers four-way master replicated on Windows 2003 std. We are in the process of evaluating Sun Directory Proxy server to resolve single point of failure between our custom apps and LDAP servers. I would appreciate any insights on Sun DPS implementation on Windows 2003 Std.
Thanks

While it might not be too good an idea (you essentially want the DPS for load balancing AND failover, right? So why risk putting it on the same machine ;) ), it does work.
I recently implemented DPS on Solaris, and things generally work fine. (The command line interface isn't too reliable though). If you are thinking of routing all your traffic over SSL (ie, Client---ssl--->DPS---ssl--->DS), make sure you apply the latest patch available for the DPS. The dps524.jar that comes with the default installer isn't what it used to be (JES 2005Q4), and will give you issues when configuring SSL for DPS. Apart from that, things are more or less a breeze.

Using a Mac on windows network with a proxy server

Hi I’m very new to Macs to apologies if this is a really silly question. I’m
trying to setup a Mac on our network and I’m having an issue getting it to work
properly with our proxy server. I have connected the Mac to the network and
selected automatic proxy configuration in the network settings using the URL of
our Pac file. I am asked for a proxy username and password when I initially try and
access a website but once I have entered my credentials they are saved in
keychain and anyone coming after me can browse using my account. I work in a
hospital so there are many different people accessing different devices. We
monitor and trace all users internet browsing so my question is can I configure
the Mac to ask for proxy credentials for different users? On our windows devices
a login box will appear if the browser has been closed and reopened. Can I do
this with the Mac?????
Any help you can offer will be very much appreciated.
Thanks

The short answer is that the IT department is a strict Microsoft shop and also incompetent. Almost everything in that message is patently false. Unfortunately, when accessing Microsoft Server services like this, you will need the support of the IT staff to tell you various settings to use. I think it is pretty clear that they have no intention of doing that.
There is nothing "special" about bootcamp. It is just a boot loader. A Mac running Windows via bootcamp is a Windows PC, not a Mac. As such, it will work perfectly fine in the network. You could also try running Parallels. I believe Parallels can be configured to use a bootcamp partition so you could run Windows via either bootcamp or Parallels.
One of the few things that is correct is that Apple does have to provide driver support for bootcamp and there is the possibility of random incompatibilities - but no more so than any other PC manufacturer. Parallels/VMWare may work around that with a different set of incompatibilities. Don't be too worried about this part. These "incompatibilities" are minor and almost always with funky hardware devices. What you want to do should work perfectly with either Parallels/VMWare or Bootcamp.

Using a Mac with a proxy server

Hi I’m very new to Macs to apologies if this is a really silly question. I’m
trying to setup a Mac on our network and I’m having an issue getting it to work
properly with our proxy server. I have connected the Mac to the network and
selected automatic proxy configuration in the network settings using the URL of
our Pac file. I am asked for a proxy username and password when I initially try and
access a website but once I have entered my credentials they are saved in
keychain and anyone coming after me can browse using my account. I work in a
hospital so there are many different people accessing different devices. We
monitor and trace all users internet browsing so my question is can I configure
the Mac to ask for proxy credentials for different users? On our windows devices
a login box will appear if the browser has been closed and reopened. Can I do
this with the Mac?????
Any help you can offer will be very much appreciated.
Thanks

Do NOT store the proxy server username and password in Keychain.
Easy to say, but by default, the next person to enter their password is likely to store their username password in the Keychain.
You can use Applications -> Utilities -> Keychain Access to give the Keychain a separate password and to auto-lock it after 'n' minutes. If you are the only one to know the Keychain password, then no one will be able to add the Proxy server username/password to the keychain.
Keychain Access -> Edit -> Change Settings for Keychain Login...
Keychain Access -> Edit -> Change Password for Keychain Login... (this is NOT required; you can keep the keychain set to use the same password you use for your login, as long as no one else knows that password; changing the settings to lock the keychain is sufficient for your needs)
The good news is that only you will be able to access stuff stored in the Keychain. The bad news is that if you do need stuff in the Keychain, you will need to enter the keychain password everytime you need to get at them.

How to configure a proxy server for Windows Azure Tools in Visual Studio 2013

Hi Visual Studio/Azure Tools team
I would like to use the Windows Azure tools in Visual Studio 2013 to manage my Azure Web sites (Server Explorer -> Windows Azure -> Web Sites) from within my corporate network which is secured using a proxy server. Unfortunately, I am not able to use
the Windows Azure tools since the required HTTPS connection to windows azure is not going through the default configured proxy. Instead, Visual Studio tries directly to connect to port 443 which is blocked by our corporate firewall (and yes: there is no way
around using our proxy server). Other visual studio features like NuGet, updates, etc. work fine and use the configured proxy server.
So my question: How can I configure visual studio respective its Azure tools to use a proxy server instead of a direct connection? I already tried configuring the proxy server within the file devenv.exe.config but this doesn't show any effect for Windows Azure
tools.
Regards
tschaena

As we have very similar problems I consider the found solution a work arround an existing problem which will not work if corporate FW policy does not allow such changes.
In my mind, any tools in charge of dealing with some sort of FW protocols should deliver the following information, should make it absolute clear how to setup that the request packages are setup rigth at the first time.
a) proxy server
b) proxy port
c) proxy user
d) proxy users-password
e) proxy.auth.Preference="BASIC"
And for moste tools (including Visual Studio and AZUR Tools) it is absolut unclear
a) how to setup that on a per tools basis
b) OR who inherits this information from whom i.e. use the same as IE does, what if we use FireFox or any other browsers?
I understand that developers requested to cure such problem areas will often have difficulty to gain all required elemenst used to realy test the solution.
But I can tell you: I loos more time figthing down the FW setups for my clients. WHat I do at home in a sniff, takes ages to be realised by all the various clients on the market where each has to deliver the same sort of information but actually does not,
or has it just somewhere, but not in the vicinity of the demanding user.
Good examples i.e. NetBeans IDE where the Option Menu shows very clearly what information is required to pass through a FW/Proxy; but even there, the hint to start with a BASIC authentication schema is not part of this OPTION menu and must be added a JAVA
environment value. But at least, it works.
Sepp

Keep gettig this error message when trying to connect to Firefox The proxy server is refusing connections.

Redownloaded Firefox and continue to get this error message when trying to connect: The proxy server is refusing connections
Firefox is configured to use a proxy server that is refusing connections.
Check the proxy settings to make sure that they are correct.
Contact your network administrator to make sure the proxy server is
working.

Go to Options > Advanced > Network > Connection > Settings and choose "No proxy".
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
It is important that you keep IE updated. The information included with your question, indicates that you are using IE7; you should update to IE8 for your own protection. IE9 will not be made available for Windows XP.
*http://windows.microsoft.com/en-US/internet-explorer/products/ie/home

CRIO startup directory was typed STARTUP and now will not boot. How do I recover from this error or how do I rename the directory when my proxy server is read only due no startup files?

I loaded files on the cRIO but used upper case letters for the startup directory. Now I cannot access the RIO since it didn't boot. The proxy server comes up read-only so I can't reload the files or change the directory. I tried the RS232 port but I can't get it to respond to commands even though I can see the processor boot.

lockmas wrote:
I loaded files on the cRIO but used upper case letters for the startup directory. Now I cannot access the RIO since it didn't boot. The proxy server comes up read-only so I can't reload the files or change the directory. I tried the RS232 port but I can't get it to respond to commands even though I can see the processor boot.
There is NO need to put your entire question into the subject line of your post.
cRIO will not boot is a suitable subject line

'-1' bytes in log file - iPlanet Web Proxy Server 3.6

I'm running iPlanet Web Proxy Server 3.6, and getting strange results in log file using extended format. Where the number of bytes should be (c1 - the content-length sent to the client by the proxy).
I regularly get a '-1' instead of the number of bytes. Anyone tell me where this is coming from and how to stop it?

Someone in the Web Proxy Server forum might. I guess you accidentally posted in the Web Server forum. However, if your question is time- or business-critical, you should probably contact Sun directly: http://www.sun.com/support

Installing a Proxy server?

Ok.
I have come a bit further then last time.
I have managed to get both my internal mailserver and my external mail gateway up and running. They are talking together and mail is flowing as intended.
On the mail gateway in the DMZ local delivery is turned off.
On the internal mail server I now have IMAP running and I'm using Squirrel mail for web based mail.
Web mail is delivered from the internal gateway address through NAT.
I'm running the external web service on the mail gateway in the DMZ.
I'm running internal webservices on the internal server.
VPN connects directly to the internal router.
Wireless services connect directly to the internal network
I have bought a second router to put between the ISP and my DMZ. Once I have installed this router I will start to restrict the flow of information.
Now I would like to take a look at how to set up a proxy server.
I know what it is for, and where to put it but I don't know how to configure such a device.
Could you please point me to some reading material on this issue?
Perhaps something of similar quality as the documentation on postfix.org.
TIA
Hans

Just wondering...
Should I be asking this question on another forum?
If so, on which forum?
Hans

Outlook 2013: There is a problem with the proxy server's certificate

Hello!
One more question regarding Outlook 2013/Exchange2013SP1:
There are three lab PCs: DC, Exch1, Exchange2. There's a wildcard certificate installed on Exch1 (https://social.technet.microsoft.com/Forums/en-US/6a440c99-47bd-4f48-8cc5-9f92e6b06496/wildcard-certificate-for-exchange-2013?forum=exchangesvrgeneral).
OWA works perfect with this wildcard certificate.
I install Outlook2013 on Exch1 and get the error:
DC.Entreprise.Local is a computer certificate issued for the computer DC.Enterprise.Local.
DC.Enterprise.Local IS NOT (and never was) the proxy for Exch1 or Exchange2:
How Outlook could request DC's certificate if the proxy server = Exch1.Enterprise.Local???
Thank you in advance,
Michael

Hello all,
Thank you for your replies!
Since I'm using a wildcard certificate I changed Outlook providers according to this:
http://blogs.technet.com/b/exchange/archive/2013/08/02/part-2-reverse-proxy-for-exchange-server-2013-using-iis-arr.aspx
If you do choose to use a wildcard certificate, you should also make sure that you
change the EXPR Outlook Provider, so that Outlook Anywhere clients can successfully connect to the Exchange Server (this behavior can be a particular issue
if you have Windows XP clients). If you do not make this change then end users may continue to receive a prompt for a certificate mismatch."
...and EXCH and EXPR are both set to *.Enterprise.Local.
"I install Outlook2013 on Exch1" you mean you install Outlook on top of Exchange?" - on the same server as Exchange, and in this case Outlook must use SCP, not DNS (the server and the client are in the same AD domain).
"Without SCP, Exchange try DNS autodiscover lookup, first site it will try is
https://emaldomain/autodiscover/autodiscover.xml, which happen to be resolve to your domain controller." - I think that's the case... I just don't understand why
an internal client can't find the SCP that does exist and point to exch1.enterprise.local:
Regards,
Michael

There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"

Good day Guys
First of all I am not an Exchange Expert, and I might be asking a very stupid question, but please bare with me. :)
While I was on leave our Mail server fell over and The company got a Specialist to help out for the time being.
We where\are on Microsoft Exchange 2007 , which Fell over, and the specialist was able to recover as much data as he could.
They then installed Exchange 2013 and tried to migrate everything from 2007 to 2013 and not everything migrated over.
But the problem is, Outlook Anywhere was enable on 2007 and worked a 100% (before the disaster)
With Exchange 2013 I get the following error message when trying to connect With Outlook 2013, using an external connection:
"There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"
Outlook is unable to connect to the Proxy server. (Error Code 0)"
Has anyone had the Similar when migrating over from 2007 to 2013 or is this an Issue on IIS and nothing to do with Exchange migration?
Your assistance will be greatly appreciated.

Hi,
Firstly, I would suggest we use Exchange 2013 FE as the Outlook Anywhere proxy server.
For the certificate issue, it mostly occurs because the host name that Outlook are trying to access does not match the certificate SAN. Please check with this point. If they do not match, you
can change the host name by referring to the following article:
https://support.microsoft.com/kb/940726/en-us?wa=wsignin1.0
Thanks,
Simon Wu
TechNet Community Support

Proxy server 3.6 question

Similar Messages

Maybe you are looking for