Pull data Service??

Can any tell me some example Data Service for Data PULL in Flex??
I know that LCDS and BLAZEDs are the example for Data PUSH..
Pls help me to know that Data Pull in Flex

Pls help me out friends..

Similar Messages

Data Services Designer - Error when pulling large source tables

Hi all,
I have been trying yo load data from an SAP table - BSIS into MS SQL server database using BO Data Services Designer XI 3.2. It is a simple data flow with one souce table (BSIS).
When we execute the job, it says what is mentioned below:
*"Process to execute Dataflow is started"*
*"Cache statistics determined that DataFlow uses <0> caches with a total use of <0> bytes. This is less than the virtual memory <1609564160> bytes available for caches. Statistics is switching the cache type to IN MEMORY."*
*"Dataflow using IN MEMORY cache."
It stays there for a while and says "Dataflow terminated due to error"
In the error window, it says DF received a bad system message.
Does not specify the error... It asks to contact the customer support with error logs, ATL files and DDL scripts.
Can anyone help me out???
Thank you and regards,
Suneer.

Hi,
please do not post the short dump in this forum.
I blieve the system will read from table dt_iobj_dest.
The problem is that 0FISCPER, 0FISCYEAR and 0FISCVARNT are not registered.
You can register the infoobject 0FISCYEAR and 0FISCVARNT
retroactively:
1) se24, CL_UG_BW_FIELD_MAPPING
2) F8 -> test environment
3) GET_INSTANCE, do not use IT_FIELD_RESTRICT
4) IF_UG_BW_MAPPING_SERVICES
5) REGISTER_INFO_OBJECT
6) specify I_RFCDEST
            I_INFOOBJECT
   attention: I_RFCDEST is case-sensitive
kind reg.
Michael
ps. please do not forget to assign points.

Pulling Data from an imported web service into a data grid - Flex 3.0

Hi all,
I have created a web service from Oracle using JDeveloper and imported it into my Fex 3 project, and I am trying to populate a data grid with the data from the web service. I was trying to emulate the example found in my Adobe Flex 3.0 for Dummies book (see http://dougmccune.com/flexfordummies/chapter14/srcview/index.html), and while the code from the book with that data service works fine, I can't get my application to work. My issue is with the part of code mx:DataGrid dataProvider="(service)" - I do not know how to specify what to use for the data source to populate the data grid from my imported web service. Any suggestions or examples would be helpful, as I am a newcomer to Adobe Flex. My code is as follows:
<?xml version="1.0" encoding="utf-8"?><mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"xmlns:webservices="
generated.webservices.*">
<mx:Script>
<![CDATA[
private function getData():void {service.getPdRec(ageDt.text);
]]>
</mx:Script>
<webservices:PD_Pct_Web_Service id="service" />
<mx:VBox>
<mx:HBox width="100%">
<mx:TextInput id="ageDt" width="100%" />
<mx:Button id="submitButton" label="Search" click="getData()" />
</mx:HBox>
<mx:DataGrid dataProvider="(service.getPdRec_lastResult
" rowHeight="
58" width="100%" height="300">
<mx:columns>
<mx:DataGridColumn dataField="creditManager" headerText="Credit Manager" width="40" />
<mx:DataGridColumn dataField="pdTarget" headerText="PD Target" width="40" />
<mx:DataGridColumn dataField="totalPd" headerText="Total PD" width="40" />
<mx:DataGridColumn dataField="pdPct" headerText="PD Percent" width="50" />
</mx:columns>
</mx:DataGrid>
</mx:VBox>
</mx:Application>
My web service returns the following when invoked:
<env:Envelope
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://erec_db/PD_Pct_Web_Service.wsdl/types/">
<env:Body>
<ns0:getPdRecResponseElement>
   <ns0:result>
    <ns0:creditManager>Cobb</ns0:creditManager>
    <ns0:pdTarget>10</ns0:pdTarget>
    <ns0:totalPd>147.65</ns0:totalPd>
    <ns0:pdPct>26.77</ns0:pdPct>
   </ns0:result>
   <ns0:result>
    <ns0:creditManager>Collova</ns0:creditManager>
    <ns0:pdTarget>10</ns0:pdTarget>
    <ns0:totalPd>27.71</ns0:totalPd>
    <ns0:pdPct>21.67</ns0:pdPct>
   </ns0:result>
   <ns0:result>
    <ns0:creditManager>Lee</ns0:creditManager>
    <ns0:pdTarget>10</ns0:pdTarget>
    <ns0:totalPd>33.61</ns0:totalPd>
    <ns0:pdPct>72.38</ns0:pdPct>
   </ns0:result>
   <ns0:result>
    <ns0:creditManager>Maynard</ns0:creditManager>
    <ns0:pdTarget>10</ns0:pdTarget>
    <ns0:totalPd>74.19</ns0:totalPd>
    <ns0:pdPct>33.69</ns0:pdPct>
   </ns0:result>
   <ns0:result>
    <ns0:creditManager>Ong</ns0:creditManager>
    <ns0:pdTarget>10</ns0:pdTarget>
    <ns0:totalPd>13.26</ns0:totalPd>
    <ns0:pdPct>46.06</ns0:pdPct>
   </ns0:result>
</ns0:getPdRecResponseElement>
</env:Body>
</env:Envelope>

Use data binding. <mx:DataGrid dataProvider="{service.getPdRec_lastResult}"
-Radhakrishna

Error while running a job in Data services

We are using Data services BO XI R3 tool.
We have created datastore for Oracle database 8i using Microsoft ODBC DSN. This is the source datastore.
When job is to pull the data from source to 10g target, we get the below error in log file:
25219 1 CON-120902 6/26/2009 Data services ODBC Driver Manager unable to find
data source <...> in $LINK_DIR/bin/odbc.ini file.
Is this a UNIX/Windows error?
Please let us know how this can be resolved.
Thanks in advance!

I restart the jobserver and it work, for a moment :P, but now says more...
1. SQL submitted to ODBC data source <Prova7> resulted in error <[MySQL][ODBC 3.51 Driver][mysqld-5.0.77]No database
selected>.
2. The SQL submitted is <select VERSION, SECURITYKEY, GUID from AL_VERSION where NAME = 'Repository Version' >.
Cannot retrieve <Version> from the repository. Additional database information: <SQL submitted to ODBC data source
<Prova7>
3. resulted in error <[MySQL][ODBC 3.51 Driver][mysqld-5.0.77]No database selected>. The SQL submitted is <select
VERSION, SECURITYKEY, GUID from AL_VERSION where NAME = 'Repository Version' >.>.
SQL submitted to ODBC data source <Prova7> resulted in error <[MySQL][ODBC 3.51 Driver][mysqld-5.0.77]No database
selected>.
4. The SQL submitted is <select VERSION from AL_VERSION>.
Cannot retrieve <Version> from the repository. Additional database information: <SQL submitted to ODBC data source
<Prova7> resulted in error <[MySQL][ODBC 3.51 Driver][mysqld-5.0.77]No database selected>. The SQL submitted is <select
VERSION from AL_VERSION>.>.
5. Cannot retrieve <Version> from the repository. Additional database information: <SQL submitted to ODBC data source
<Prova7> resulted in error <[MySQL][ODBC 3.51 Driver][mysqld-5.0.77]No database selected>. The SQL submitted is <select
VERSION from AL_VERSION>.>.
I check if mysql DB has thas tables (they were created when I setup DS), but i don't know why this erros says No database selected the odbc file looks correct...
Thank you,
Edited by: ToloPalmer on Jun 1, 2010 9:51 AM
Edited by: ToloPalmer on Jun 1, 2010 9:58 AM

R/3 data flow is timing out in Data Services

I have created an R/3 data flow to pull some AP data in from SAP into Data Services. This data flow outputs to a query object to select columns and then outputs to a table in the repository. However the connection to SAP is not working correctly. When I try to process the data flow it just idles for an hour until the SAP timeout throws an error. Here is the error:
R/3 CallReceive error <Function Z_AW_RFC_ABAP_INSTALL_AND_RUN: connection closed without message (CM_NO_DATA_RECEIVED)
I have tested authorizations by adding SAP_ALL to the service account I'm using and the problem persists.
Also, the transports have all been loaded correctly.
My thought is that it is related to the setting that controls the method of generating and executing the ABAP code for the data flow, but I can't find any good documentation that describes this, and my trial and error method so far has not produced results.
Any help is greatly appreciated.
Thanks,
Matt

You can't find any good documentation??? I am working my butt off just.......just kiddin'
I'd suggest we divide the question into two parts:
My dataflow takes a very long time, how can I prevent the timeout after an hour? Answer:
Edit the datastore, there is a flag called "execute in background" to be enabled. With that the abap is submitted as a background spool job, hence does not have the dialog-mode timeout. Another advantage is, you can watch it running by brwosing the spool jobs from the SAP GUI.
The other question seems to be, why does it take that long even? Answer:
Either the ABAP takes that long because of the data volume.
Or the ABAP is not performing well, e.g. join via ABAP loops with the wrong table as inner.
Another typical reason is to use direct_download as transfer method. This is fine for testing but it takes a very long time to download data via the GUI_DOWNLOAD ABAP function. And the download time would be part of the ABAP execution.
So my first set of questions would be
a) How complex is the dataflow, is it just source - query - data_transfer or are there joins, lookups etc?
b) What is the volume of the table(s)?
c) What is your transfer method?
d) Have you had a look at the generated abap? (in the R/3 dataflow open the menu Validation -> Generate ABAP)
btw, some docs: https://wiki.sdn.sap.com:443/wiki/display/BOBJ/ConnectingtoSAP

Unable to connect to the server to pull data from mysql

Hello,
I am novice working with Flash Builder 4 and I just created a test application which runs well in my computer pulling data from Mysql using PHP and populating a datagrid. But when I transfered it to the my hosting provider failed. I have been doing some modifications to the gateway.php and amf.config.ini to solve some of the issues. Now the application try to run but doesn't populate the data in the datagrid. I included a tracking point in my data service file to read the connections variables, but they come up in blank. I highly appreciate any help. Here are my gateway.php, amf.config.ini and the data service.
gateway.php
<?php
ini_set("display_errors", 1);
$dir = dirname(__FILE__);
$webroot = $_SERVER['DOCUMENT_ROOT'];
$configfile = "$dir/amf_config.ini";
$fp = fopen("tracking.txt", "a");
fwrite($fp, "1-config file " . $configfile . "\r\n");
//default zend install directory
$zenddir = $webroot. '/ZendFramework/library';
//-$zenddir = $webroot;
fwrite($fp, "2-default zendir" . $zenddir . "\r\n");
//Load ini file and locate zend directory
if(file_exists($configfile)) {
     $arr=parse_ini_file($configfile,true);
     if(isset($arr['zend']['webroot'])){
          $webroot = $arr['zend']['webroot'];
          $zenddir = $webroot. '/ZendFramework/library';
     if(isset($arr['zend']['zend_path'])){
          $zenddir = $arr['zend']['zend_path'];
fwrite($fp, "3-after zendir" . $zenddir . "\r\n");
// Setup include path
//add zend directory to include path
set_include_path(get_include_path().PATH_SEPARATOR.$zenddir);
// Initialize Zend Framework loader
require_once 'Zend/Loader/Autoloader.php';
//-require_once 'Autoloader.php';
Zend_Loader_Autoloader::getInstance();
// Load configuration
$default_config = new Zend_Config(array("production" => false), true);
$default_config->merge(new Zend_Config_Ini($configfile, 'zendamf'));
$default_config->setReadOnly();
$amf = $default_config->amf;
fwrite($fp, "4- configfile" . $dafault_config["production"] . "\r\n");
// Store configuration in the registry
Zend_Registry::set("amf-config", $amf);
// Initialize AMF Server
$server = new Zend_Amf_Server();
$server->setProduction($amf->production);
if(isset($amf->directories)) {
     $dirs = $amf->directories->toArray();
     foreach($dirs as $dir) {
         // get the first character of the path.
         // If it does not start with slash then it implies that the path is relative to webroot. Else it will be treated as absolute path
         $length = strlen($dir);
         $firstChar = $dir;
         if($length >= 1)
              $firstChar = $dir[0];
         if($firstChar != "/"){
              // if the directory is ./ path then we add the webroot only.
              if($dir == "./"){
                   $server->addDirectory($webroot);
              }else{
                   $tempPath = $webroot . "/" . $dir;
                    $server->addDirectory($tempPath);
          }else{
                  $server->addDirectory($dir);
fwrite($fp, "5-temp path" . $tempPath . "=>" . "\r\n");
fwrite($fp, "******************************************" . "\r\n");
// Initialize introspector for non-production
if(!$amf->production) {
     $server->setClass('Zend_Amf_Adobe_Introspector', '', array("config" => $default_config, "server" => $server));
        $server->setClass('Zend_Amf_Adobe_DbInspector', '', array("config" => $default_config, "server" => $server));
// Handle request
echo $server->handle();
?>
amf.config.ini
[zend]
;set the absolute location path of webroot directory, example:
;Windows: C:\apache\www
;MAC/UNIX: /user/apache/www
;-webroot =c:/wamp/www/
webroot = /home/frutiexp/public_html
;set the absolute location path of zend installation directory, example:
;Windows: C:\apache\PHPFrameworks\ZendFramework
;MAC/UNIX: /user/apache/PHPFrameworks/ZendFramework
;zend_path = /home/frutiexp/public_html/ZendFramework
[zendamf]
amf.production = true
amf.directories[]=fb41/services
;amf.directories[]=./
CoursesService.php
<?php
* README for sample service
* This generated sample service contains functions that illustrate typical service operations.
* Use these functions as a starting point for creating your own service implementation. Modify the
* function signatures, references to the database, and implementation according to your needs.
* Delete the functions that you do not use.
* Save your changes and return to Flash Builder. In Flash Builder Data/Services View, refresh
* the service. Then drag service operations onto user interface components in Design View. For
* example, drag the getAllItems() operation onto a DataGrid.
* This code is for prototyping only.
* Authenticate the user prior to allowing them to call these methods. You can find more
* information at <link>
class CoursesService {
     var $username = "myusername";
     var $password = "mypassword"
     var $server = "localhost";
     var $port = "3306";
     var $databasename = "frutiexp_trainsur";
     var $tablename = "courses";
     var $connection;
      * The constructor initializes the connection to database. Everytime a request is
      * received by Zend AMF, an instance of the service class is created and then the
      * requested method is invoked.
     public function __construct() {
            $this->connection = mysqli_connect(
                                          $this->server,
                                          $this->username,
                                          $this->password,
                                          $this->databasename,
                                          $this->port
$fp = fopen("./tracking.txt", "a");
fwrite($fp, "1-service". $databasename . " " . $username . "\r\n");
fclose($fp);
          $this->throwExceptionOnError($this->connection);
      * Returns all the rows from the table.
      * Add authroization or any logical checks for secure access to your data
      * @return array
     public function getAllCourses() {
          $stmt = mysqli_prepare($this->connection, "SELECT * FROM $this->tablename");
          $this->throwExceptionOnError();
          mysqli_stmt_execute($stmt);
          $this->throwExceptionOnError();
          $rows = array();
          mysqli_stmt_bind_result($stmt, $row->cou_id, $row->cou_title, $row->cou_overview, $row->cou_objectives);
         while (mysqli_stmt_fetch($stmt)) {
           $rows[] = $row;
           $row = new stdClass();
           mysqli_stmt_bind_result($stmt, $row->cou_id, $row->cou_title, $row->cou_overview, $row->cou_objectives);
          mysqli_stmt_free_result($stmt);
         mysqli_close($this->connection);
         return $rows;
      * Returns the item corresponding to the value specified for the primary key.
      * Add authroization or any logical checks for secure access to your data
      * @return stdClass

Hello Jdesko,
Thank you for you prompt response. Yes, I have changed the connections variables in my dataservice ( I didn't post real values). You are right, after all I didn't make changes on the gateway.php except to add some tracking points. The one that I changed is the amf.config,ini. The application runs without any error exceptions, but don't populate the datagrid. According with the tracing is stoping just when establishing the connection to the database. Please let me know if you have any other clue. thanks

Push Data in SAP Tables using Data Services

Hi
Lets suppose that I have used Data Services 4.0 to pull data from KNA1 table , and loaded into the MDM where data cleansing , enrichment and deduplication has been done, and then MDM writes to a file.
How can Data Services then push the cleansed data back into the SAP table ( KNA1) ? [or it cannot be done due to multiple reasons ]
Rishi

Hi
To update an SAP table, import the metadata for the relevant BAPI or IDoc and call it via a query transform.
M

Flash Builder 4.5 Auto-Gen Code For PHP Data Service Produces Errors

Hello
I'm currently running a fresh install of MAMP on my Mac and when I start a new flex project, add a php data service that pulls from a mysql database I have. Everything works fine until I try to compile. The error I'm getting is 'uid' being the primary key which is a bigint(20). The file _Super_Users.as (auto-gen based on the user table below) reports 2 errors: [Managed] requires uid to be of type 'String'. (same error on 2 lines of code) Now the MySQL table wants it to be a int, the auto gen code seems to want it to be an int as well but for some reason its putting in these requires for String on the getter and setters for 'uid'. The is before I even add any of my own code, just auto-gen then compile.
     * data/source property getters
[Bindable(event="propertyChange")]
    public function get uid() : int /*error line*/
        return _internal_uid;
     * data/source property setters
    public function set uid(value:int) : void /*error line*/
        var oldValue:int = _internal_uid;
        if (oldValue !== value)
            _internal_uid = value;
This is what my database looks when I export it:
CREATE TABLE `users` (
`uid` bigint(20) unsigned NOT NULL,
`name` varchar(150) NOT NULL,
`first_name` varchar(50) NOT NULL,
`middle_name` varchar(50) NOT NULL,
`last_name` varchar(50) NOT NULL,
`gender` tinyint(1) NOT NULL,
`locale` varchar(5) NOT NULL,
`link` varchar(255) NOT NULL,
`username` varchar(50) NOT NULL,
`email` varchar(255) NOT NULL,
`picture` varchar(255) NOT NULL,
`friends` text NOT NULL,
`created` datetime NOT NULL,
`updated` datetime NOT NULL,
PRIMARY KEY (`uid`)
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
It's empty right now...
Apache 2.0.64
MySQL 5.5.9
PHP 5.2.17 & 5.3.5
APC 3.1.7
eAccelerator 0.9.6.1
XCache 1.2.2 & 1.3.1
phpMyAdmin 3.3.9.2
Zend Optimizer 3.3.9
SQLiteManager 1.2.4
Freetype 2.4.4
t1lib 5.1.2
curl 7.21.3
jpeg 8c
libpng-1.5.0
gd 2.0.34
libxml 2.7.6
libxslt 1.1.26
gettext 0.18.1.1
libidn 1.17
iconv 1.13
mcrypt 2.5.8
YAZ 4.0.1 & PHP/YAZ 1.0.14
I tried to give as much info as possible, if you need more let me know...

I discovered my problem was uid seems to be a built in global or something and was filling in that data field with a bunch of letters and number, like the device id. Because of the letters flex was throwing a fit. So if you're using Facebook API in flex be sure to not go with uid for the user id, which is was facebook api calls it.

Data services stop working after updating to new OS version for Q10

I am from Qatar, after i updated my device ( Q10 SNQ100-3 ) to new OS ( 10.2.1.537 ), the mobile data services stopped working, but it works everytime I connect to wifi. This is the same with Z10. Please need help.

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive
2) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Data services connectivity with Oracle 8i database

Query 1:
We are using Data services XI R3 for pulling data from Oracle 8i data soure to Oracle 10g target.
Our repository is also a 10g database.
We created a datastore for 8i source and tried to import the table.
Below is the error that we get when try to import the table:
Error: Cannot import metadata.
Oracle <....> error message for operation <OCIStmtExecute> : <ORA-00904: Invalid column name>..(BODI-1112338)
While creating datastore, we entered database type as Oracle.
We were able to import the table with same 8i source , target and repository of 10g version by using Data Integrator XI R2 tool but when we try the same thing with Data services, we are getting this error.
Any other alternative other than using System DSN?
Query 2:
Also,is there any performance impact if we use ODBC System DSN name as the data source instead of Oracle while creating data store in Data services XI R3?
We have used DSN since we were not able to import table from Oracle 7 and 8i databases(source) into repository (Oracle 10g) if we give Oracle as the data source. Target database is also Oracle 10g database.
Edited by: Amardeep Pandey on Jun 26, 2009 8:51 AM

the following issue is fixed in XI 3.2, you will be able to import the tables, but Oracle 8i and 7 are not supported oracle datastore versions, you will have to select oracle 9i in the datastore
Oracle <....> error message for operation <OCIStmtExecute> : <ORA-00904: Invalid column name>..(BODI-1112338)
no there is no other alternate than using ODBC

Issue while using views in Data services Jobs

Hi,
In Data Services Job, i am trying to pull data from a view to a table. The view is pointing to the table which is in other database.
The problem is when i import the source view into data services and view the data, i found one row having wrong data. The values in that row are wrong/corrupted while the same row in the source table is having correct values
I queried the view from TOAD for that record. The values are valid.
The data is coming wrong only in Data services. Any row in that table gets corrupted, there is no specific row.
Hence while running the jobs i am getting errors.
Any idea what can be the reason of getting corrupted data in view while same view when queried from TOAD gives correct values?

hi,
There is a possibility of unsupported data type by data service, please share the data service version, database type and data type of column which got corrupted.
Regards,
M Ramesh

Unable to use extractor 2LIS_11_VAHDR with Data Services

Hi,
We are currently trying to use Data Services to extract data from ECC to HANA using standard Business Content extractors. BW is beyond the scope of this project and we want to build a custom SQL data mart using Data Services and HANA.
We would like to use the extractor 2LIS_11_VAHDR to extract Sales Order Header information. However, when we try to fill the setup tables for application 11, we see the error ‘No extraction structure active or no BW connected’:
We have confirmed that the data sources are active in both t-codes RSA6 and LBWE. We are also able to pull the DataSource up in t-code RSA3 but obviously no records are returned because the setup tables are empty.
RSA6
LBWE
RSA3
Please advise as to any other steps needed to allow the filling of the setup tables. Your help is highly appreciated.
Thanks,
Abhi

We were able to resolve this issue with SAP's help. Here is the solution.
If you want to be able to execute OLI7BW, you need to either connect a BW system to the source system or create at least one subscription within Operational Delta Queue.
If you do not want to connect a BW system, this means you would first have to issue a CDC request from Data Service for a 2LIS_11* data source (e.g. 2LIS_11_VAITM) with an empty setup table.
This will create an active subscription, enabling you to start the setup program OLI7BW.
After this you should be able to request a second initial load from Data Services, by temporarily setting property "Initial load" to "Yes". This will be the "real" delta init, providing the data from the setup tables to Data Services.
Hope it helps!

Delta data load for huge table in Data Services XI R3

Hi,
We have a project requirement of pulling delta data once in a week from table which has around 44 million records but it doesn't have any last modified column.
In such case we have to use table comparison transform, but it will be very time consuming.
Please provide some suggestions to meet this requirement.
The source of DS job is a snapshot(the source table is in a remote database).
Thanks!

Because SAP Business Objects Data Services XI 3.x doesn't have any built-in delta-enablement mechanism with R3/ECC, the only possibility right now is to do a table compare. Given that this is only a weekly activity, while maybe time-consuming, it may be sufficient.
In the future, you may want to consider activating the related SAP BW standard content DataSource(s) to extract into Data Services prior to loading to the target repositories. This may provide delta-enablement for the data that you're extracting.

Using PHP Data Services to create an object and accessing that objects data in an unbound way in AS

Hello,
I've been able to use the php data services and bind the results of a function to a component. However I am having a hard time figuring out the syntax to use the data services to create an object out of the results, and then use that object as an array of filenames to provide the current index of the filename to a new sound object.
My problem is obviously in not being able to figure out the specific syntax, I have declared the service and and object of the services returned type and in the creationComplete() function I have assigned object.token = service.getData();
I've tried various ways of then pulling that data out of the object, with no success.
Can someone point me in the right direction?
This code probably looks horrible because it doesn't work yet.
- Joel
            import flash.media.Sound;
            import flash.media.SoundChannel;
            import mx.controls.Alert;
            var playing:Sound = new Sound();
            var channel:SoundChannel = new SoundChannel();
            var sndIndex:int=0;
            var skpTr:String;
            public function init():void{
             mp3Array.token = mp3service.getData();
             currentTrack(mp3Array.lastResult.filename);
                 trace(mp3Array.lastResult.filename[sndIndex]);
            public function currentTrack(t:String):void{
                playing = new Sound();
                playing.load(new URLRequest("mp3/" +t));
            public function skip():void{
                stop();
                if (sndIndex != mp3Array.lastResult.length-1){
                    sndIndex++;
                    var skipTr:String=mp3Array.lastResult.filename[sndIndex].data;
                    currentTrack(skipTr);
                    play();
                } else {
                    sndIndex=0;
                    skipTr=mp3Array.lastResult.filename[sndIndex].data;
                    currentTrack(skipTr);
                    play();
            public function stop():void{
                channel.stop();
            public function play():void{
                channel = playing.play();
    <fx:Declarations>
        <s:CallResponder id="mp3Array"/>
        <mp3services:Mp3Service id="mp3service" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
        
    </fx:Declarations>

Hello Joel;
In retrieving your data - what is your php returning to FB, an object, object array, an array? Either way, I have a brief example below that an object(s) is being returned. Pull the data from the lastResult in a ResultEvent. The object instantiated in the resultEvent will contain your data and you can do what you want from there.
Also, I always use Network Monitor to see what data (if any) is being returned from the server, you can also see how it is being sent back.
John
private function init():void
     mp3Array.token = mp3service.getData();
     mp3Array.addEventListener(FaultEvent.FAULT, faultHandler);
     mp3Array.addEventListener(ResultEvent.RESULT, mp3Array_resultHandler);
protected function faultHandler(event:FaultEvent):void
     Alert.show("There was a fault error!" + event.message, "Fault Error", Alert.OK);
protected function mp3Array_resultHandler(event:ResultEvent):void
     // Not sure if your service is sending back an object or an array or ?
    var info:Object = mp3Array.lastResult;
     doSomeFunction(info)
protected function doSomeFunction(data:Object):void
     trace(info.filename);

How to pull data from oracle GL to planning

Hi all
Can one suggest me how to pull data from oracle GL in to hyperion planning(we are using hyperion planning 9.3 with limited licence for analytic services). i guess we can use HAL ..any thing else
any help is appreciable
regards
M.V

Hi
I appreciate for your response. Yep you are exactly right it is data only, but I do have a problem these people have their licence of limited version of Essbase.
Let me give you the information of their licence agreement.
The licence for the hyperion planning- sytem9 programs includes a limited use license for both the hyperion Essbase- system 9 and hyperion Financial reporting - system 9 programs. Such limited use license means that the hyperion Essbase- system 9 and Hyperion financial reporting -system 9 programs may only be used to access data from the Hyperion planning -system 9 program.
Specifically, the hyperion essbase- system 9 program cannot be used to create Essbase cubes that do not contain data used by the Hyperion planning- system 9 program and the Aggregate storage option component of the Hyperion Essbase - system 9 program may not be used.
1) what it(licence agreement) really means - can you install Essbase, if not how can you create dimensions dynamically using planning.
2) Is it possible without Essbase as far as I know its not possible
3) are we going to face any issues with this licence.
4) Is it possibe to pull data with planning
I appreciate if any one resolve this issue
regards
M.V

Pull data Service??

Similar Messages

Maybe you are looking for