Pull down box/gui

The following is also posted in "java programming", but since I am working with swing I decided to post here too...
I need to make a pull down box with a gui in it.
ex) when you click on a text field, a box will slide down underneath with a gui in it. After clicking on the gui & setting up info (which consists of combo boxes, etc), then you choices will appear in the text field.
I have implemented this using a dialog box that will show then the text field is clicked. Unfortunately, the user has to close the box & we don't want any people to loose this little box behind another window & screw him/herself up (we all know there are some stupid people in this world).
Therefore, I would like to have this as a little pull down box that can't be moved and will automatically disappear when all choices are filled.
...So my problem is, I Don't Know Where To Begin! I searched through the java 1.3 api and can't find a class to help me. Any suggestions would be a great help!

You want something that acts like a combo box, but it has more components on it than simple text. Like a calendar that pops up like a comobox, but instead of a list of text items there is a calendar component there. Is this right?
You can still use a dialog box, if you make it modal and parent it correctly. Then the dialog box won't be able to get behind other windows. You could even use a JOptionPane which you pass the JTextField in as the component and it will center on the JOptionPane over the JTextField. JOptionPane's are much easier to parent correctly than JDialogs. They also let you control their display them with more than just a quick text question. They also take care of a lot of the expected behavior of regualar dialogs.
If you don't want to use a dialog box for this. And, you want to get fancy. Put what you want to display on a JPanel instead. For testing, you can add the JPanel to a frame or dialog box to test the layout and the look. You can also put the JPanel on a JOptionPane if you so choose to do that. JPanels are much more flexible than JDialogs.
To get the panel into your app, look into using the drag layer, or glass pane of the JTextfield's encompassing frame. Frames and dialog boxes have three different layers to place components: content pane, drag pane, and glass pane. You can use the SwingUtilities methods to get the surrounding container of the JTextField to put your JPanel on it's glass pane.
Attach keylisteners or mouse listener to know when to remove your JPanel from the surrounding container's glass, or drag layer.
charlie

Similar Messages

When trying to move email messages to trash I get a pull down box that says 'The operation couldn't be completed. File exists'

when trying to move email messages to trash I get a pull down box that says 'The operation couldn’t be completed. File exists'.
so I'm not able to move read messages to trash folder

Back up all data. Rebuild the named mailbox. Try to delete the message again.

Referencing files in a pull down menu

How do I create a pull down box that will reference files saved on the
PC and open those files in a new window and can this pull down menu
reference an entire directory to see what files are available?

Here is a way to populate the list box with the files in a directory.
Message Edited by AndrewAlford on 11-16-2005 02:13 PM
Andrew Alford
Production Test Engineering Technologist
Sustainable Energy Technologies
www.sustainableenergy.com
Attachments:
filelist.JPG ‏69 KB

I'm using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can't select Color, Advanced BW or Grayscale unless I select "Printer Manages Color". The pull down menu is grayed out. Even with "pr

I’m using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can’t select Color, Advanced BW or Grayscale unless I select “Printer Manages Color”. The pull down menu is grayed out. Even with “printer manages color” the tif or jpg image comes out in color overlaid with black. (See example - printer1. image on left is close to what it should be). Photoshop has no updates pending. I’ve downloaded the latest Epson driver which was working fine just before the problem occurred

Is your Photoshop CS5 updated to 12.1?
Are you on Yosemite 10.10.1 or Yosemite 10.10.2?
Did you apply the recent Epson software 2.1.9 update?
What type of file is it (file format)? What bit depth and what color space?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Making pull down menus and file open dialogs speak

Hi,
I'm trying to create some applications that include speech
assistance for the visually impaired. there are two things that are
causing problems:
1. I can't make the file open dialog boxes speak. I would
like to emulate the behavior of third party screen reader
applications that speak the identites of GUI elements as the user
tabs through them. I am able to do this for custom dialogs made
with the MUI Xtra by putting voiceSpeak commands in the callback
handler so that as each widget gets focus during tabbing, it speaks
its identity. But this doesn't appear to be possible with file open
dialogs created with FileXtra.
2. I have created pull down menus using installMenu. This
works great, but I would like the user to be able to navigate these
menus using the arrow keys, and have each menu item speak as it
navigated to.
If anyone has any ideas about how to accomplish these things
in D11, I would be very grateful.
thanks.

It's a 1046: Type was not found or was not a compile-time constant: Void.function openSubMenu(whichSubMenu, currentPosition):Void {
function closeSubMenu():Void { 1046: Type was not found or was not a compile-time constant: Void.
this["menuButton"+i].onRollOver = function():Void { 1046: Type was not found or was not a compile-time constant: Void.

In version 31.3 the arrow that let me pull down the recipient list to an email I'm composing has gone. It's impossible to check if all are listed.

It's difficult to check whether I've entered all of several intended recipients of an email I'm composing. I can scroll up and down, but I can't see the entire list to check for inclusions and duplicates. Please reinstate the pull-down arrow!

''Raggedy [[#question-1039699|said]]''
<blockquote>
It's difficult to check whether I've entered all of several intended recipients of an email I'm composing. I can scroll up and down, but I can't see the entire list to check for inclusions and duplicates. Please reinstate the pull-down arrow!
</blockquote>
''Zenos [[#answer-673279|said]]''
<blockquote>
Hover your cursor over the addresses. Hopefully a pop-up tooltip thingy will appear listing the addressees.
It's become difficult to see, but if you move the cursor about slowly in the grey area between the addresses and the message text window, you should be able to find the handle that lets you resize the addressing area and thereby see more addresses. Mine reveals its presence by changing to a slightly paler shade of grey.
I do detest the near-zero discoverability in modern GUI design. We seem to be slavishly copying of all the worst features of the Google UI. :-(
</blockquote>
Got it! Thanks so much. A little more detail for the benefit of others: you'll find the addressing area resize handle immediately above the white text area, in the narrow part of the grey area below all of the address field, subject line, scroll boxes and icons.

Actions not appearing in Action Drop Down Box

We are in the process of upgrading from 4.0 to 7.0, in 4.0 we have used SAP GUI as the main UI, we are due to go-live with the upgrade very soon and have a problem when creating an opportunity through to a quotation within the SAP GUI Screens, we need this to work for go-live in SAP GUI, we are however after go-live working on the NEW WEB UI
Problem:
We have set up that the Partners are determined from the opp --> Quotaion, these all work fine and transfer as expected. We also have a number of ACTIONS set up that should appear within the ACTION DROP DOWN area of the screen - these are no working in V7.0
For Example:-
Action - 'Email Quotation To Customer'
This action is set up to email lthe customer when triggered, this no longer appears. If I remove the customer and re-add them then it shows and works fine, it is acting as though the Action is not seeing the customer that is brough through from the OPP
The conditions of the action are met, it is set to look for SalesTrans.UserStatus and Partner Detimation - BOTH ARE MET but the system doesn't seem to see the PARTNER
Any help would be appreciated
Regards
Barry

The actions are defiened as follows
Action = 'Email Quotation to Customer'
The action sends an email to the customer (using partner ZQUOPAR (Quotation Partner) which is determined from the Sold-To-Party in the proceding document)
The Action is set to show in the drop down box, the Action does not show even when the Partner is listed
This works fine in V4.0 but not in V7.0
Regards
Barry

Text elements in drop down box

Hi,
I am working on text elements in drop down box for service request application. I have a requirement that the display of text elements in PCUI should be in such a way that
depends on the role of the user. eg: for role 'X' some text elements should be displayed and role 'Y' remaining text elements should be displayed. In SAP GUI all text elements should be displayed. I copied MAC of text data to ZCL_CRM_BSP_AM_SLS_TM and tried to add the logic in methods IF_CRM_BSP_MODEL_ACCESS_IL~GET_ALLOWED_DDLB_VALUES
IF_CRM_BSP_MODEL_ACCESS_IL~FILL_DROPDOWN_LISTBOX
when i put external break point none of this methods are touched. Instead it goes to the methods of the class CL_CRM_BSP_TEXTMANAGEMENT_SC. This method is buried deep inside. Should i copy all the standard classes above this class and do the modification? Is there any other way? Any help is highly appreciated.
Kind Regards,
Charan

Hi Charan,
You have mentioned that in GUI all text elements have to be displayed. Why is it so?
If that's not the case then you can control it in PFCG authorizations. Object CRM_TXT_ID.
If you provide authorizations for a specific role for specific text ids only, the same would reflect in PCUI also. Others may not appear in the dropdown.
Please try.
Regards,
J.Prabananth

Problem in Safari with pull-down menus

My current version of Safari, Version 7.0.3 (9537.75.14), is the buggiest software I have ever had from any Apple--bar none. The problem is dealing with pull-down menus.
The first such problem is in dealing with pull-down menus on websites.   Some of these menus are quite long.   On one particular menu the choice that I routinely need is way down near the bottom.   Routinely Safari stops scrolling before I can get that far down the pull-down menu.
And, always, when Safari stops scrolling on a pull-down menu on a webpage, it refuses to allow me to scroll down again.   To get the webpage's pull-down menu to operate then, I have to re-load the webpage.   That is a big problem for one website that I MUST use. This website has three pull-down menus on one webpage. Because Safari always locks up on the first menu, this crucial website is unusable in Safari. I have to use Firefox for this absolutely essential website.
And Safari has trouble with one of its own pull-down menus. This is the PDF menu in the printer window. Not always, but too often, when I pull down that menu to print to PDF, Safari crashes.   I have to wait for a dialog box to come up and click "send report to Apple" in order to get Safari to reopen.   I don't know how many such reports I have sent to Apple. I get the feeling that Apple is not listening.
Does anyone have any suggestions for these problems? TIA

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Problem with Inspector pull-down menus

I have this weird problem with DVD Studio Pro all of a sudden. I'm wondering if a recent update might have broken something, and how I can fix it.
The problem is that certain pull-down menus in the Inspector are not responding anymore. Important ones too, like "set target" and "end jump," Remote Control functions, as well as ones I don't use as often like Shape (button shape?). I click on them and nothing happens, although sometimes the default "not set" text disappears. These menus are in the same place in the Inspector, so this may or may not have something to do with it, I have no idea.
At any rate, I can't make a DVD without these functions, and I usually need to make a DVD once or twice a week. Although it has been two weeks since I last used it.
I am almost positive that nothing has changed with my system since I used it last, besides Apple Software Updates.
Version 2.0.5, OSX Tiger. I know, time to upgrade, but I don't control the budget.

Just the Inspector, i haven't found any other problems.
Quicktime was updated a few days before the problem started. On May 27th I ran the updates for Quicktime 7.4.5, ProKit 4.5, iTunes 7.6.2, and Safari 3.1.1. I noticed the problem with the DVDSP Inspectors the next time I ran the program on May 29.
I understand the ProKit is for a later version so I'm a bit mystified as to why I was offered the update, however I've installed previous ProKit updates without any problems.
A clean install will certainly be my next step. But I have to wait for a lull in real work activity before I can get into that. Luckily I've remembered that I can accomplish a lot of what I needed the inspector for under the Connections tab, so it's a little less urgent now.
I'm usually pretty careful about running updates, and I usually ignore them for a few weeks (or longer) before I run the updates so I can monitor the internet for other people's disasters. But I got lazy this time. Maybe there are not too many DVDSP v2 installations out there. And maybe I need to increase the pressure on my company to update my software!
On that note, this experience is helping my case with convincing them to replace one of the old Avids with a new FCS suite, so it might become a moot point. Will the license allow me to operate DVDSP4 on a different machine or does it have to stay on the main suite, if we go that way? We like to process the output on another box, so the editors can get on with the next project.

Need help in this select drop down box

Hi i had a drop down box written with select and i had many options , when user selects the option it will insert this to database and when user goes to the edit form the preselected value has to be populate automatically in dropdown , but the last option is populating everytime when uses edit form.
below is the code:
insert page:
            <select name="council" id="council" name="Please select Council from dropdown box">
                <option value="Division">Division</option>
                <option value="Facility">Facility</option>
                <option value="District D">District D </option>
                <option value="District E">District E </option>
                <option value="District J">District J </option>
                <option value="District K">District K </option>
                <option value="District L">District L </option>
                <option value="District M">District M </option>
                <option value="District N">District N </option>
                <option value="District O">District O </option>
                <option value="District Q">District Q </option>
                <option value="District S">District S </option>
                <option value="District T">District T </option>
                
                <option value="D 506">D 506</option>
                <option value="D 524">D 524</option>
                <option value="D 525">D 525</option>
                <option value="D 530">D 530</option>
                <option value="D 531">D 531</option>
                <option value="D 536">D 536</option>
                <option value="D 549">D 549</option>
                <option value="D 558">D 558</option>
                <option value="D 562">D 562</option>
                <option value="D 581">D 581</option>
                <option value="D 583">D 583</option>
                <option value="D 597">D 597</option>
                <option value="D 598">D 598</option>
                <option value="D 599">D 599</option>
                <option value="D 628">D 628</option>
                <option value="D 686">D 686</option>
                <option value="D 698">D 698</option>
                <option value="D 848">D 848</option>
                <option value="D 862">D 862</option>
                <option value="D 870">D 870</option></select>
this is edit page code:
                   <select name="council" id="council">
               <cfoutput query="getdata">
                <option value="Division" <cfif council IS "#getdata.council#"> selected</cfif>>Division</option>
                <option value="Facility" <cfif council IS "#getdata.council#"> selected</cfif>>Facility</option>
                <option value="District D" <cfif council IS "#getdata.council#"> selected</cfif>>District D </option>
                <option value="District E" <cfif council IS "#getdata.council#"> selected</cfif>>District E </option>
                <option value="District J" <cfif council IS "#getdata.council#"> selected</cfif>>District J </option>
                <option value="District K" <cfif council IS "#getdata.council#"> selected</cfif>>District K </option>
                <option value="District L" <cfif council IS "#getdata.council#"> selected</cfif>>District L </option>
                <option value="District M" <cfif council IS "#getdata.council#"> selected</cfif>>District M </option>
                <option value="District N" <cfif council IS "#getdata.council#"> selected</cfif>>District N </option>
                <option value="District O" <cfif council IS "#getdata.council#"> selected</cfif>>District O </option>
                <option value="District Q" <cfif council IS "#getdata.council#"> selected</cfif>>District Q </option>
                <option value="District S" <cfif council IS "#getdata.council#"> selected</cfif>>District S </option>
                <option value="District T" <cfif council IS "#getdata.council#"> selected</cfif>>District T </option>
                <option value="D 506" <cfif council IS "#getdata.council#"> selected</cfif>>D 506</option>
                <option value="D 524" <cfif council IS "#getdata.council#"> selected</cfif>>D 524</option>
                <option value="D 525" <cfif council IS "#getdata.council#"> selected</cfif>>D 525</option>
                <option value="D 530" <cfif council IS "#getdata.council#"> selected</cfif>>D 530</option>
                <option value="D 531" <cfif council IS "#getdata.council#"> selected</cfif>>D 531</option>
                <option value="D 536" <cfif council IS "#getdata.council#"> selected</cfif>>D 536</option>
                <option value="D 549" <cfif council IS "#getdata.council#"> selected</cfif>>D 549</option>
                <option value="D 558" <cfif council IS "#getdata.council#"> selected</cfif>>D 558</option>
                <option value="D 562" <cfif council IS "#getdata.council#"> selected</cfif>>D 562</option>
                <option value="D 581" <cfif council IS "#getdata.council#"> selected</cfif>>D 581</option>
                <option value="D 583" <cfif council IS "#getdata.council#"> selected</cfif>>D 583</option>
                <option value="D 597" <cfif council IS "#getdata.council#"> selected</cfif>>D 597</option>
                <option value="D 598" <cfif council IS "#getdata.council#"> selected</cfif>>D 598</option>
                <option value="D 599" <cfif council IS "#getdata.council#"> selected</cfif>>D 599</option>
                <option value="D 628" <cfif council IS "#getdata.council#"> selected</cfif>>D 628</option>
                <option value="D 686" <cfif council IS "#getdata.council#"> selected</cfif>>D 686</option>
                <option value="D 698" <cfif council IS "#getdata.council#"> selected</cfif>>D 698</option>
                <option value="D 848" <cfif council IS "#getdata.council#"> selected</cfif>>D 848</option>
                <option value="D 862" <cfif council IS "#getdata.council#"> selected</cfif>>D 862</option>
                <option value="D 870" <cfif council IS "#getdata.council#"> selected</cfif>>D 870</option>
</cfoutput>
            </select>
i dont know where i am making mistake and i observered one behavoir that if i have less options it is working but not with many why like that , please help me in this
Thanks

Seems to me your conditionals should look something like this:
<option value="Division"<cfif getData.council is "Division"> selected="selected"</cfif>>Division</option>
<option value="Facility"<cfif getData.council is "Facility"> selected="selected"</cfif>>Facility</option>
Your condition is the same for every option, and would likely never evaluate to true:
<cfif council IS "#getdata.council#"> selected</cfif>
getData.council will be "Division" or "Facility" or "District D" or ...
... but it would never be "council".
HTH.
Charlie

PULL DOWN MENU

IN HR REPORT I HAVE TO USE STANDARD SELECTION SCREEN THIS WIIL GET WHEN I USE LOGICAL DATABASE. BUT I NEED ONE MORE SELECTION PARAMETER WHICH HAS PULL DOWN MENU .
CAN ANY BODY PLS LET ME KNOW HOW TO GET PULL DOWN MENU IN SELECTION SCREEN

I guess u r asking for list box
report zcha .
type-pools: vrm.data:
ivrm_values type vrm_values.
data: xvrm_values like line of ivrm_values.
data: name type vrm_id.
parameters: p_month as listbox visible length 10.
parameters: p_year as listbox visible length 4.
at selection-screen output.
name = 'P_MONTH'.
refresh ivrm_values.
xvrm_values-key = '1'.
xvrm_values-text = 'January'.
append xvrm_values to ivrm_values.
xvrm_values-key = '2'.
xvrm_values-text = 'February'.
append xvrm_values to ivrm_values.
xvrm_values-key = '2'.
xvrm_values-text = 'March'.
append xvrm_values to ivrm_values.
call function 'VRM_SET_VALUES'
exporting            id     = name
     values = ivrm_values.
name = 'P_YEAR'.
refresh ivrm_values.
xvrm_values-key = '2001'.
xvrm_values-text = '2001'.
append xvrm_values to ivrm_values.
xvrm_values-key = '2002'.
xvrm_values-text = '2002'.
append xvrm_values to ivrm_values.
xvrm_values-key = '2003'.
xvrm_values-text = '2003'.
append xvrm_values to ivrm_values.
call function 'VRM_SET_VALUES'
   exporting            id     = name
      values = ivrm_values.

Set preset values that can be selected from a pull-down manu

I am writing a VI in LabView 7.1 to collect data. I have a set of variables that need to be set at the beginning. I used Basic Information subVI to input these variables to be saved in the data file header, but everytime I run the VI I have to type in pretty much the same thing. The variables I use usually can be selected from a list of number, text or Y/N. I thought about using Configure File VI, but I think that will only give me a fixed set, not a choice. I wonder if there is a way to preset a list of variables so that I can select one value from the list rather than type in everything each time.
Thanks,
Ron

1. Write a Vi that have all your variables i.e. enum, ring, text controls, boolean controls etc
When this Vi is called, it allows user to configure all settings
There will be a "save" button. Upon clicked, it should prompt user to input a filename (i.e. *.ini) and the file will be saved to a pre-determined directory i.e. LabVIEW Default Directory
With the above, a new *.ini file is created for respective set of variables.
2. Knowing that all *.ini files are stored at LabVIEW Default Directory, make use of the attached example VI, modify it to suit your needs, to get all *.ini filenames and update to the Combo Box control
With the Combo Box control, you can now choose the desired configuration file (*.ini) to be loaded for the rest of the test needs.
3. The selected *.ini file path is now input to a Vi that does the extraction of all variable settings from the selected *.ini file.
Above is just one of many ways that you could have a pull-down menu for selecting a set of settings from a set of configuration files.
Hope this make sense to you
Cheers!
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
IFK_CFIO_Get Filenames to Combo Box.vi ‏30 KB

PSE 11, Panoramic Photomerge is not in the pull-down window

Hi everyone:
I just purchased the upgrade from PSE 9 to PSE 11 for the Mac. I was having "glitches" when doing Panoramic Photomerge; sometimes the file photos I chose to merge would be ignored by the program and it would never even open them. At least in PSE 9, when I opened the program - the pull down Panoramic Photomerge selection was there.
The glitches got me thinking: maybe I was having a problem due to the fact that the program was an older version? Okay, let's upgrade and see if the newer PSE 11 is even better! Interestingly enough, when opening PSE 11 - the Panoramic Photomerge selection isn't even present in the software. From what I can tell from the tutorials - it's still a feature available - just not my download. Help!!! I have no idea what to do to fix it. I see no error codes or anything like that; it's like the features doesn't exist on my machine.
Anything anyone can recommend would greatly be appreciated. I really love the Panoramic Photomerg feature.
Jeff

They got it partially right. If you go to Help> Photoshop Elements Help and enter panorama in the search box you get a page of links.
The first link (http://helpx.adobe.com/photoshop-elements/using/stitching-together-panoramas.html) as you say tells you to look under the File menu (as does the fourth).
The second link (http://helpx.adobe.com/photoshop-elements/getting-started/photomerge-panorama.html) correctly describes the Enhance menu path.
And of course in the Organizer it appears under the Edit menu. The lot of a product documentation writer is not a happy one
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Adobe Flash player jiggles the screen on drop down boxes, videos, and animation

Any time I visit a site with drop down boxes, videos, or animation that require Flash, that portion of the screen will do a fast jiggle up and down - like it is refreshing too fast. Adobe Flash works fine in IE. Some sites the jiggle is slower than others. This is only happening with Firefox. I have searched the net for possible solutions and cannot find others with this problem. The jiggling is almost like portions of the screen have gone spastic.
I am running Windows 7 64 bit on a Toshiba Laptop . I am running Firefox 9 and Flash 11.1.102.55 64 bit plug in. I have uninstalled and reinstalled both programs and have not been able to fix it. My video driver is up to date.

Tylerdowner, as a moderator, one would think that, prior to adjusting comments/solutions, especially when not having a Mac, you would do more research (bet you know someone with a Mac, to duplicate problem), or pass responding on to a moderator who does have a Mac (I am amazed that you are even a moderator on Mac problems/situations, if you only have access to a PC). Had the solutions above worked, I would not have needed to figure out another solution (we all know the newest release of anything is the most secure). Finally I am open to any fixes (tested) that you can provide, that improve upon mine. As a moderator, maybe you have pull with the Foxtab and/or Adobe people to get them to work out compatibility, and lastly, maybe add a warning at the Foxtab add-ons page, after verifying the problem yourself, with an associate's/friend's Mac.

Pull down box/gui

Similar Messages

Maybe you are looking for