Purpose of application server

sir the developer 10g suite also work in three tier architecture like 10ias, can i build forms and report in 10ias without having 10g suite, then How to build forms and reports in 10 ias. Do i need to install 10g suite form building forms and repors. I have 9i as database and 10ias installed

sir
once there is 10gsuite where we can build and run oracle forms then what is the advantage of 10ias. Do i i need to intall 10gsuite in addition to 10ias to build forms and reports. Does 10ias give some addtional facilities which 10gsuite do no give kindly clear the doubts.
thank you

Similar Messages

How to integrate Oracle Portal running on Oracle Application Server 10.1.2

I have an Oracle Portal running on a Oracle Application Server 10.1.2.
Portal is responsible ( along with OID ) for the users authentication and authorization.
There is a new JEE application that was developed recently, which the Portal users must have access to.
HOW can I put a link into a page of the Portal, that redirects the portal user to a new browser window displaying my new application?
HOW can this new application, running in a separate weblogic 11g (10.3.5) server, automatically authenticate with the same username/password previously authenticated when the user logged into the portal?
Any ideas?
I´ve already thought in a bunch of ways to do it:
- put a link into the portal with a sessionId, then when opening the new app, it automatically tries to use the same session. How can I configure this session id during the creation of the portal's page? How can I use it from the new app to use the same session?
- put a link into the portal with a userid, then when opening the new app, it automatically tries to authenticate using a different authentication provider configurated in WL, which points to Portal´s OID. In this situation, how can I ensure that the user is already logged in and the session has not timed out?
- Should I use OSSO?
- Should I use OAM?
Any help would be appreciated!
Murilo

Hi Murilo,
A portletized version of your J2EE app would probably have been ideal for your purpose as it would handle both authentication (through SSO) and session information (through Portal framework as the framework can pass session information to the provider/producer). This would require changes to the application however.
Easiest approach would be to use mod_osso to protect your J2EE application. SSO would then handle the authentication for your Portal and your J2EE application.
Thanks,
EJ

Downloading to Application server

Hi gurus,
My requirement is to download a file to application server in background mode by DYNAMICALLY SELECTING THE DIRECTORIES AVAILABLE in application server.
i.e. i must display all the directories available in application server in the selection screen than the user will select which directory and folder he wants to download.
I used both F4_DXFILENAME_TOPRECURSION and SAPDMC/LSM_F4_SERVER_FILE but the problem is:-
F4_DXFILENAME_TOPRECURSION :-
When we use the above FM than by default it displays all the files in 'H:' directory only , we cannot access any other directory.
So we need to assign the I_PATH = J:(one of the other directory available) in the FM(I_PATH is one of the parameter in FM) and than we can easily store the output inside 'J:'
But this does not serve the purpose since we can see only 'J:' directory now but the user wants to see all the directories and depending on requirement they will choose the path..........
SAPDMC/LSM_F4_SERVER_FILE :-
even this FM has the same problem and we need to pass the particular directory path inside this.
Waiting for ur replies..its urgent
points will be definitely awarded

Hi janak dolia,
to download this the procedure:
you can use the FM 'EXCEL_OLE_STANDARD_DAT ' for this purpose.
this FM 'EXCEL_OLE_STANDARD_DAT' can be used to start Excel with a new sheet and transfer data from an internal table to the sheet.
Here are some of the parameters:
file_name: Name and path of the Excel worksheet file e.g. ?C:TEMPZTEST?
data_tab: Name of the internal table that should be uploaded to Exvcel
fieldnames: Internal tabel with column headers
How to build the field names table:
data: begin of i_fieldnames occurs 20,
field(60), end of i_fieldnames.
i_fieldnames-field = ?This is column 1?. append i_fieldnames-field.
i_fieldnames-field = ?This is column 2?. append i_fieldnames-field.
to upload follow this:
OPEN DATASET dsn FOR INPUT IN BINARY MODE.
DO.
READ DATASET dsn INTO itab-field.
IF sy-subrc = 0.
APPEND itab.
ELSE.
EXIT.
ENDIF.
ENDDO.
[/code]Rob
or Try this function module.
FILE_READ_AND_CONVERT_SAP_DATA
pass 'XLS' to I_FILEFORMAT..
Regards,
Sreenivasa sarma K.
Edited by: sharmashree kashi on Mar 27, 2008 9:08 AM

File from the Application server

Hi gurus,
I am working on a scenario where I need to get a file from the application server and for this I need to ask user to enter the location and that too at the selection screen and then I need to read this location using open data set and read data set in my program , once I am done with this I need to do some other validations. so can you please help me out how to achieve this.
Thanks
Rajeev Gupta

Hi
Declare the selection screen with file as parameter so that the user enter the application server file..
the use the OPEND DATASET as mentioned in below code and process
Refer this:
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures.
*& Report ZUPLOADTAB                                                  *                     &----
*& Example of Uploading tab delimited file                             *
REPORT zuploadtab                    .
PARAMETERS: p_infile LIKE rlgrap-filename
                        OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
    name1 like pa0002-VORNA,
    name2 like pa0002-name2,
    age   type i,
    END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
      wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
    CLEAR: wa_string, wa_uploadtxt.
    READ DATASET ld_file INTO wa_string.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                      wa_uploadtxt-name2
                                      wa_uploadtxt-age.
      MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
      APPEND wa_upload TO it_record.
    ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
    write:/     sy-vline,
           (10) wa_record-name1, sy-vline,
           (10) wa_record-name2, sy-vline,
           (10) wa_record-age, sy-vline.
endloop.
Regards
Anji

How to download files from Application Server of Unix o.s to local director

Hi All,
I am trying to download files from Apllication server of Unix operating Systems to local file in excel sheet format using a z-program.but whenever I am trying to use OPEN dataset ........
it is showing sy-subrc = 8.
Can I have any clew please.
Thanks in advance,
Regards,
AMEER.

Hi Sreekanth,
Thanks a lot for quick reply.I have to download that files from z-program only. I am giving you my code below.
*& Report ZTRAK_DOWNLOAD *
REPORT ZTRAK_DOWNLOAD MESSAGE-ID ZCT .
SELECTION-SCREEN BEGIN OF BLOCK DOWNLOAD WITH FRAME TITLE TEXT1.
PARAMETERS :
 SERDIR LIKE RLGRAP-FILENAME DEFAULT '/usr/trak',
 LOCDIR LIKE RLGRAP-FILENAME DEFAULT 'C:\Trak'.
SELECTION-SCREEN END OF BLOCK DOWNLOAD .
SELECTION-SCREEN BEGIN OF BLOCK INFO2 WITH FRAME.
 SELECTION-SCREEN COMMENT 1(79) TEXT2.
 SELECTION-SCREEN SKIP.
 SELECTION-SCREEN COMMENT 1(79) TEXT3.
SELECTION-SCREEN END OF BLOCK INFO2 .
SELECTION-SCREEN BEGIN OF BLOCK INFO3 WITH FRAME.
 SELECTION-SCREEN COMMENT 1(79) TEXT4.
 SELECTION-SCREEN SKIP.
 SELECTION-SCREEN COMMENT 1(79) TEXT5.
 SELECTION-SCREEN SKIP.
 SELECTION-SCREEN COMMENT 1(79) TEXT6.
 SELECTION-SCREEN SKIP 1.
 SELECTION-SCREEN COMMENT 1(79) TEXT7.
 SELECTION-SCREEN SKIP 2.
 SELECTION-SCREEN COMMENT 1(79) TEXT8.
SELECTION-SCREEN SKIP 1.
 SELECTION-SCREEN COMMENT 1(79) TEXT9.
SELECTION-SCREEN END OF BLOCK INFO3.
*- Internal Table to output data in Excel
DATA: BEGIN OF tab_excel OCCURS 0,
 col1(50),
 col2(132),
 col3(255),
 col4(100),
 col5(100),
 col6(50),
 COL7(60),
 col8(30),
 col9(30),
 col10(30),
 col11(20),
 col12(15),
 col13(15),
 END OF tab_excel.
DATA: FILE LIKE RLGRAP-FILENAME .
DATA: W_DATASET(80).
INITIALIZATION.
TEXT1 = 'Download Reports'.
TEXT2 = 'The Program downloads the reports generated by Trak'.
TEXT3 = 'Utility from Server to Local PC.'.
TEXT4 = 'Check the following before executing the Program.'.
TEXT5 = ' 1. A valid Server path is provided.'.
TEXT6 = ' 2. A valid Local PC path is provided.'.
TEXT7 = ' 3. Local PC has 10 MB free space.'.
TEXT8 = 'The report can be executed in the forground.'.
TEXT9 =
'The report should be executed after execution of Transaction TRAK'.
AT SELECTION-SCREEN.
IF SERDIR EQ ''.
MESSAGE E001(ZCT).
ENDIF.
IF LOCDIR EQ ''.
MESSAGE E002(ZCT).
ENDIF.
START-OF-SELECTION.
Download ABAP Development Summary Report
FILE = '\ABAP_Report_Developments.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/ABAP_Report_Developments.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download BDC Development Report
FILE = '\BDC_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/BDC_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Development Summary Report
FILE = '\Developments_Summary_Report.XLS' .
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Developments_Summary_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Enhancement Development Report
FILE = '\Enhancement_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Enhancement_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download field exit Development Report
FILE = '\Field_Exit_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Field_Exit_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Frequency & Purpose Report
FILE = '\Frequency_And_Purpose_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Frequency_And_Purpose_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Function Group Developments Report
FILE = '\FunctionGroup_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/FunctionGroup_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Function Module Developments Report
FILE = '\FunctionModule_Developments_Report.XLS' .
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/FunctionModule_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Include Developments Report
FILE = '\Include_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Include_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download UserGroup Developments Report
FILE = '\UserGroup_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/UserGroup_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Modified_Standard_SAP_Objects_Report
FILE = '\Modified_Standard_SAP_Objects_Report.XLS' .
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Modified_Standard_SAP_Objects_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Include Developments Report
*FILE = '\Include_Developments_Report.XLS'.
*CONCATENATE LOCDIR FILE INTO FILE.
*W_DATASET = '/Include_Developments_Report.dat'.
*CONCATENATE SERDIR W_DATASET INTO W_DATASET.
*PERFORM INIT.
Download SAP Script Developments Report
FILE = '\SAP_Scipt_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/SAP_Scipt_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Transaction Developments Report
FILE = '\Transaction_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Transaction_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download User Exits Developments Report
FILE = '\UserExits_Reports.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/UserExits_Reports.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download ABAP Query Developments Report
FILE = '\ABAPQuery_Developments_Reports.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/ABAPQuery_Developments_Reports.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Functional Area Developments Report
FILE = '\FunctionalArea_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/FunctionalArea_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
MESSAGE S003(ZCT) WITH LOCDIR.
END-OF-SELECTION.
This routine checks whether file exists if yes downloads it to
the Local PC
FORM INIT.
OPEN DATASET W_DATASET FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
 IF SY-SUBRC <> 0.
 EXIT.
 ENDIF.
 READ DATASET W_DATASET INTO tab_excel.
 APPEND tab_excel.
 CLEAR tab_excel.
ENDDO.
 PERFORM DOWNLOAD_FILE.
ENDFORM.
This routine downloads the data in an XL format on local PC
FORM Download_File .
CALL FUNCTION 'WS_DOWNLOAD'
 EXPORTING
 FILENAME = FILE
 FILETYPE = 'DAT'
 TABLES
 DATA_TAB = tab_excel
 EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_WRITE_ERROR = 2
 INVALID_FILESIZE = 3
 INVALID_TYPE = 4
 NO_BATCH = 5
 UNKNOWN_ERROR = 6
 INVALID_TABLE_WIDTH = 7
 GUI_REFUSE_FILETRANSFER = 8
 CUSTOMER_ERROR = 9
 OTHERS = 10.
 IF sy-subrc <> 0.
 message ''. " Error in file transfer
 ELSE.
 CLEAR TAB_EXCEL.
 REFRESH TAB_EXCEL.
 FILE = ''.
 W_DATASET = ''.
 ENDIF.
ENDFORM.
I have created those files in Application Server running in another z-program in background mode.Then I am trying to download those files using above the program.I am creating those trak/Trak files manually and I can able to see those files in A.S level.But when downloading the same files I am facing the problem.
regards,
Ameer

Client-cert auth impl in web.xml does not work in Oracle Application Server

Hi,
I am new to implementing security features on the web applications.. I have developed a new web service using jdev1012 and deployed in OAS 10.1.2. Its working fine according to the business requirements, but I am in need of implementing client-cert authentication to enable the web service available to only those who have client certificate.
My server details are:
Oracle Application Server 10g Release 2 (10.1.2)
Server certificate is in place and SSL mode have been already enabled.. able to access my web service through https://<mydomain.com>/myws/TreqWS as well able to see the WSDL file through https://<mydomain.com>/myws/TreqWS?WSDL.
I tried to include the following in my web.xml file as part of implementing CLIENT-CERT authentication.
<security-constraint>
<display-name>SecurityConstraint</display-name>
<web-resource-collection>
<web-resource-name>WSCollection</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
<login-config>
<auth-method>CLIENT-CERT</auth-method>
<realm-name>WSCollection</realm-name> 
</login-config>
It is not woking as expected, though I have restarted my oc4j container after including this content to the web.xml file. i.e, I am able to invoke the web service though my sample java client program, though I donot have client certificate/keystore.
I believe I am missing something..Can anyone help me in this regard to implement CLIENT-CERT authentication successfully?
Thanks,
Ms

I am having the same problem with doc and xsl. I have added this
<mime-mapping>
<extension>xls</extension>
<mime-type>application/vnd.ms-excel</mime-type>
</mime-mapping>
<mime-mapping>
<extension>doc</extension>
<mime-type>application/msword</mime-type>
</mime-mapping>
to my web.xml. I even restarted the server. I still see doc and xsl in binary.
Is there some other setting that needs to take place?
I am using WL6.1 with fixpack 1.
I can see the doc and excel files in the browser if I don't go through the weblogic
server. That just confirms it's not my browser.
Kumar Allamraju <[email protected]> wrote:
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
It works fine for me in 6.1 SP1.
 
If the following doesn't work , can you
 try application/winword instead of application/msword?
--
 Kumar
Siming Mu wrote:
<blockquote TYPE=CITE>Hi,
I setup in my web.xml a mime mapping as follows,
<mime-mapping>
 <extension>doc</extension><mime-type>application/msword</mime-type>
 </mime-mapping>
When I specify a test.doc url, the doc file appears in my browser
as
binary data
 instead of download.
Please reference change request 055002, which decribes this problem.
According
 to edocs, it has been fixed in wls6.1sp1.
But I am seeing it fixed. Am I doing anything wrong? Thanks.
Siming</blockquote>
</html>

Oracle Application Server 10g Cloning

Hi All,
Could anyone please advice on How we can create a cloned copy of 10g AS(including infra DB) for DR purpose.Any document or guideline will be highly appreciated.
Regards,

Hi,

Please correct me if I am wrong, but I think cloning is fine to copy or clone a middle-tier instance. But for a copy of infrastructure DB one needs to use the chapter next to the referred one.

11 Staging a Test Environment from a Production Environment
Oracle® Application Server Administrator's Guide 
10g Release 2 (10.1.2) 
B13995-06 

The term cloning is commonly used for copying the systems but in Oracle AS, it is for copying the middle-tier instances only. That difference is often misleading.

hope that helps. 
syed

Getting the size of a file on the application server ?

hi,
hi everyone !
i' m trying to transfer a file with the function module FTP_R3_TO_SERVER...
But for this, i need to know the size of the file i wish to transfer...
I found out nothing about this, but if anyone have any idea, it would be really helpful...
thnks.

HI,
Why don't you use a ShellScript for FTPing your file.
You can execute it via ABAP and it will probably does the same
but you don't have to know how big the file is.
can think of a few:
1) Check the F1 help on READ DATASET. It has the addition LENGTH which you should be able to use for this purpose.
2) Call function SXPG_COMMAND_EXECUTE for command LIST_DB2DUMP. Parse the returned table. You may need to explicitly pass 'UNIX' or 'Windows NT' to the OPERATINGSYSTEM parameter.
3) CALL 'SYSTEM' ID 'COMMAND' FIELD 'ls -l' ID 'TAB' FIELD result-sys.
4) Disect AL11 and make use of the same C-calls
There's probably more...
if u r sending the data form presentation server (SAPFTP)
use
describe table itab line lin .
size = lin * width of internal row
If u r sending the data form application server
read the data in applicaion server file in ur prg internal table and calculate as above and size of file in ftp_r3_to_server fun module
Cheers,
Chandra Sekhar.

Application server file F4 help

Hi Gurus,
I am working for implementation proj in SAP ecc 6.0.
i just want to understand the purpose of the function module '/SAPDMC/LSM_F4_SERVER_FILE'.
Now i am working on a program which uses apacheta interface and checks for the duplicate invoices present in input file.
also I am not able to open the dataset from application server.
Give me the exact path to open a file from application server.
I also tried cg3y.

Hi,
You can try with the FM 'EPS_GET_DIRECTORY_LISTING'. With this Fm module you will get you the list of files of a particular path in an internal table. Then you can populate this internal table in F4 help.
Hope this solves your problem. If any difficulty, come back to me about that.
Below are some other FM related to application server directory. Hope these Helps.
EPS_GET_DIRECTORY_LISTING
EPS_GET_DIRECTORY_PATH
EPS_GET_FILE_ATTRIBUTES
EPS_GET_FTP_SYSTEM_INFO
Regards,
Shailesh Jadhav

Data Writing to Application server

Hi,
I am Uploading 108 fields of data to application server file
Below ZFI_PAYMENT is the table which contains 108 fields of data
Please check my code
TYPES: ty_file TYPE zfi_payment.
DATA: wa_file TYPE ty_file.
DATA: it_file TYPE STANDARD TABLE OF ty_file.
FIELD-SYMBOLS: <f1> TYPE ANY,
 <f2> TYPE ANY.
TYPES: BEGIN OF ty_data,
 data type string,
 END OF ty_data.
DATA: wa_data TYPE ty_data,
 it_data TYPE STANDARD TABLE OF ty_data.
DATA: v_pay_amount(23).
DATA: as_file TYPE file VALUE '/usr/sap/RD2/DVEBMGS20/work/fi_test2'.
select * from zfi_payment into table it_file.
open dataset as_file for output in text mode encoding default.
LOOP AT it_file INTO wa_file.
DO.
 ASSIGN COMPONENT sy-index OF STRUCTURE wa_file TO <f1>.
 IF sy-subrc <> 0.
 EXIT.
 ENDIF.
 IF sy-index = 5.
 MOVE wa_file-pay_amount TO v_pay_amount.
 CONCATENATE wa_data-data v_pay_amount '@' INTO wa_data-data.
 ELSE.
 CONCATENATE wa_data-data <f1> '@' INTO wa_data-data.
 ENDIF.
ENDDO.
move wa_data-data to wa_data1.
TRANSFER WA_DATA-DATA TO AS_FILE.
APPEND wa_data TO it_data.
CLEAR: WA_DATA,V_PAY_AMOUNT,WA_FILE,wa_data1.
ENDLOOP.
close dataset as_file.
Here i am getting all 108 fileds of data into IT_DATA. (in debugging i seen that)
But the only 68 fields of data is writing to the appl server.
there is no problem in ztable and internal tables. data is coming properly to wa_data and it_data also.
Please Give me reply
Regards
sri

Hi,
I guess, Now you are viewing only the first 68 fields on the application server. If yes, that is because of the restriction on the size and length can be viewed on application server.
Try downloading directly from here.
I guess, again using the OPEN DATASET and reading the file, it will retrieve all the data completely, i.e. only for viewing purpose, you can view the complete data.
Regards,
Nangunoori.

How to run the report via application server

Report not running?
hi All,
I am calling the report via forms, In application server i had recompiled the reports in two different format too.
1. myreports.rep
2. myreports.jsp
I have called the report from the menu and i used code like below
Declare
 V_id Varchar2(100);
Begin
 V_id := Run_Report_Object('myreports');
End;but i am getting following error.
Frm-41219:Cannot find report:Invalid ID.and subsequently an another too.
Frm-40738:Argument 1 to builtin RUN_REPORT_OBJECT cannot be null.please guide me
kanish

I using Forms 10g R2, i store the recompile version in Application server.
Good, so you can refer to the metalink note I mentioned above, as per storing the reports in the application server, the default place for running reports is not a folder in the FORMS_PATH, the REPORTS_PATH is set in the $ORACLE_HOME/bin/reports.sh file, pointing by default to the sample folder - $ORACLE_HOME/reports/samples/demo, for testing purposes you can put your report there and try it again, or you can modify the REPORTS_PATH variable in the reports.sh file to point to the directory you were mentioning.
Note: I am calling the report throug menu using the eariler posting code.
I would recommend to create a Form to call the Report, I am not sure if there are restrictions about invoking a report directly from the menu.
About the code, you are missing a lot there, refer to metalink note mentioned above, here is an excerpt from that document.
PROCEDURE TEST_REPORT IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
BEGIN
repid := find_report_object('report5');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'html');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'repserver90');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no pdeptno='||:dept.deptno);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
 LOOP
 rep_status := report_object_status(v_rep);
 END LOOP;
IF rep_status = 'FINISHED' THEN
 /*Display report in the browser*/
 WEB.SHOW_DOCUMENT('http://<YourServerName:8888/reports/rwservlet/getjobid'||
 substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
 message('Error when running report');
END IF;
END;
In my eariler version 6i (2 tier) when i call the report it invoke parameter form. will 10g also behave same like 6i?
Yes, there is still a parameter Form which runs in an HTML page.
*1. Should i want to create any Report_Path, Report_classpath ? if yes ,where should i ?* It will depend on your configuration, the easiest way is to setup the REPORTS_PATH in the $ORACLE_HOME/bin/reports.sh file, if you are configuring the reports server to use environment ids, that would not work and you would need to setup the REPORTS_PATH directly in the reports engine configuration file .. $ORACLE_HOME/reports/conf/rwserver.template.
Edited by: Rodolfo Ferrari on Jun 3, 2009 3:19 PM

Searching a file in application server

Hi Guys ,
Any ways by which i can search a file passed in my program in the sap network ...
reagrds.

check out this link
http://sap.ittoolbox.com/code/d.asp?a=s&d=2241
In the code sample given there (for a different purpose), check out the form
FORM SEARCH_PROT
The code within this form is what is required for your case. Note that you have slightly modify the code, the code given there is for listing all files in the directory.
Just found a better sample at (after posting)
http://www.sapassist.com/code/d.asp?d=1862&a=s
Regards
Raja
Is my answer for your previous Uplaoding PDF file to Application server and Web application from net Direc useful. Do you need more help on that?

SOA 10.1.3.3 Application server cannot use db 11.1.0.6.0 for orabpel user

RDBMS Version: 11.1.0.6.0
Operating System and Version: win 2000 sp4
Error Number (if applicable):
Product (i.e. SQL*Loader, Import, etc.): SOA Suite Application Server 10grel3
Product Version: 10.1.3.3
SOA 10.1.3.3 Application server cannot use db 11.1.0.6.0
For testing purposes I would like to setup a new system with Oracle Aopplication Server 10g rel 3 (10.1.3.3) Soa suite on top of an already installed Oracle Database 11.g (11.1.0.6.0)
Database 11g was installed on the server
During installation of the Application server 10g3(Full install) a database is needed (for orabpel schema etc), but the installer checks if the version of the database is higher than 9i2 . This check fails and installation cannot continue. I think this is because the check is not really if it is higher than 9i but it is looking for a predefined range of versions from V$VERSION and 11 is not within that range
Is there a possibility to overcome this? This is not a prerequisite check from OUI, but another check later on during install
I know that 11g is not certified yet for AS1og3, but this is a development environment to practice with the new releases.

I know that 11g is not certified yet for AS1og3, but
this is a development environment to practice with
the new releases.If the combination is not certified, it's not much of a development platform, right?

Print System.out.println messages into logs of Weblogic Application Server

Hi,
I use Weblogic Application Server 10.3.6 on Windows 7. The Enterprise Application (J2EE) is deployed into the 'AdminServer' of Weblogic. For debugging purpose, I have added a few System.out.println statements.
I am unable to see the print messages on any of log files available in path 'user_projects > domains > base_domain > servers > AdminServer > logs'. However, I can see them on the 'command' prompt which was used to start the server. How can I get them into one of the log files? What am I missing?
I tried reading other threads on the forum and as per them 'System.out.println' gets logged onto *.out logs which I am unable to find. Only base_domain.log, AdminServer.log, access.log are available in the location.
More Specifics:
Configuration on WLS console 'Home > Servers > AdminServer > Logging'
Log file name: logs/AdminServer.log
Min. Severity to log: Notice (tried with Debug as well)
Advanced Options:
Logging Implementation: JDK
Redirect stdout logging enabled: False (tried both options)
Log file Severity Level: Notice (tried with Debug as well)
Standard Out Severity Level: Notice (tried with Debug as well)
Thanks

Paul,
I just found this on google:
'Generally, developers put a lot of System.out.println statements in their code to perform application debugging. Normally, all standard outputs and error outputs are routed to the console where the OC4J server is started. If you want to capture the standard output and error outputs to files for logging/debugging purposes, then you can use the -out and -err options while starting up the Oc4J server to specify which files to use.'.
http://www.onjava.com/pub/a/onjava/2002/01/16/oracle.html?page=2

Placing the text file in application server

Hi all,
I am uploading the text file into application server.
the line length is 1028 characters.But in application server i am not able to see whole line.it is showing only some data and reamaining data is not coming.
Please let em know how can we increase the line length in application server.
Regards,
Shoban

SE38 is the ABAP Editor transaction.
Use function module GUI_UPLOAD to create an upload the data.
*Use function module GUI_UPLOAD to create an upload the data.
Example Code >>>
REPORT zuploadtab                    .
PARAMETERS: p_infile LIKE rlgrap-filename
                        OBLIGATORY DEFAULT '/usr/sap/'..
*DATA: ld_file LIKE rlgrap-filename.
DATA: gd_file type string.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
    name1 LIKE pa0002-vorna,
    name2 LIKE pa0002-name2,
    age   TYPE i,
    END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
      wa_record TYPE t_record.
*Internal table to upload data into
DATA: BEGIN OF it_datatab OCCURS 0,
row(500) TYPE c,
END OF it_datatab.
*Text version of data table
TYPES: BEGIN OF t_uploadtxt,
name1(10) TYPE c,
name2(15) TYPE c,
age(5) TYPE c,
END OF t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) TYPE c.
CONSTANTS: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_INFILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_infile.
CALL FUNCTION 'WS_FILENAME_GET'
       EXPORTING
            def_filename     = p_infile
            mask             = ',*.txt.'
            mode             = 'O'
            title            = 'Upload File'(078)
       IMPORTING
            filename         = p_infile
       EXCEPTIONS
            inv_winsys       = 1
            no_batch         = 2
            selection_cancel = 3
            selection_error = 4
            OTHERS           = 5.
*START-OF-SELECTION
START-OF-SELECTION.
gd_file = p_infile.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = gd_file
      has_field_separator     = 'X' "file is TAB delimited
    TABLES
      data_tab                = it_record
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
    IF sy-subrc NE 0.
      write: 'Error ', sy-subrc, 'returned from GUI_UPLOAD FM'.
      skip.
    endif.
Alternative method, where by you split fields at each TAB after you
have returned the data. No point unless you dont have access to
GUI_UPLOAD but just included for information
CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
           filename        = gd_file
           filetype        = 'ASC'
      TABLES
           data_tab        = it_datatab "ITBL_IN_RECORD[]
      EXCEPTIONS
           file_open_error = 1
           OTHERS          = 2.
IF sy-subrc NE 0.
ELSE.
   LOOP AT it_datatab.
     CLEAR: wa_string, wa_uploadtxt.
     wa_string = it_datatab.
     SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                     wa_uploadtxt-name2
                                     wa_uploadtxt-age.
     MOVE-CORRESPONDING wa_uploadtxt TO wa_record.
     APPEND wa_record TO it_record.
   ENDLOOP.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
LOOP AT it_record INTO wa_record.
WRITE:/     sy-vline,
         (10) wa_record-name1, sy-vline,
         (10) wa_record-name2, sy-vline,
         (10) wa_record-age, sy-vline.
ENDLOOP.
Edited by: Nikhil Jathar on Jan 9, 2008 7:38 AM

Purpose of application server

Similar Messages

Maybe you are looking for