QM Related Standard TCode
Hi Gurus,
We are facing a small requirement,
Business Flow:
The deminsions, metallurgical, etc..
properties of a component is freezed and samples of the same
in (less) numbers is aquired from different Vendors(say 5 or 6 in numbers)
after aquiring these samples, complete quality testing is made(This is the
first phase and in this PHASE Right First Time will be checked).Out of these
quality testing(if the testing for the samples given by the respective
vendors, is satisfactory) some vendors will be shortlisted and This time
more materials will be ordered from them for further quality testing
(This phase is called Pilot testing).Again, if this phase is successful
The corresponding vendor will be shortlisted and he is considered as
"New suppling Vendor" with respect to past six month performance.
Program Needed in Z:
1. we are going to capture only the data relating
to Pilot Stage - total lot quantity received and total of rejected
quantity wrt plant vendor material
2.The data relating
to "New Suppling Vendor" Phase wrt to past six calendar months -
total lot quantity received and total of rejected
quantity wrt vendor material
DOUBT:
{bold} Is there any Standard transaction in SAP to handle this requirement so that we can avoid this Z program?
Little bit confused... {bold} .....
Moderator Message: Don't copy paste your specs in the forum
Edited by: Suhas Saha on Aug 2, 2011 10:23 AM
Jagan,
I'm not sure this would be the correct solution but u can try with this.hope this can help you.
Solution : Go to Transaction SDMO ,there u can find a text box where u can enter the description.
Please enter ur desired description here the scenario/tcode for which u r trying for and press F8,u will get the list of standard transaction which can suffice ur description.
For those list,select appropriate one which suits for you.
Regards,
Sreeram
Similar Messages
-
Standard tcode FBL5N dump in pre production.
I am getting a dump when I execute the standard tcode FBL5N (Customer line item) with one company code. FBL5N tcode is not at all giving dump in production system, however it dumps in pre production.
The dump exists in the function module : fdm_local_get_objects_range while executing the SELECT stmt
*SELECT * FROM fdm_dcobj*
INTO CORRESPONDING FIELDS OF TABLE et_object_data
WHERE logsys LIKE i_logsys
AND obj_type LIKE i_obj_type
AND obj_key IN it_range_obj_key
AND relation LIKE i_relation
AND case_guid_loc IN it_guid
AND is_confirmed LIKE i_confirmed
AND is_voided LIKE i_voided.
Do I need to search for sap note ?
Below is dump analysis
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in procedure "FDM_LOCAL_GET_OBJECTS_RANGE" "(FUNCTION)", nor was it propagated by
a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The SQL statement generated from the SAP Open SQL statement violates a
restriction imposed by the underlying database system of the ABAP
system.
Possible error causes:
o The maximum size of an SQL statement was exceeded.
o The statement contains too many input variables.
o The input data requires more space than is available.
o ...
You can generally find details in the system log (SM21) and in the
developer trace of the relevant work process (ST11).
In the case of an error, current restrictions are frequently displayed
in the developer trace.
How to correct the error
The SAP Open SQL statement concerned must be divided into several
smaller units.
If the problem occurred due to the use of an excessively large table
in an IN itab construct, you can use FOR ALL ENTRIES instead.
When you use this addition, the statement is split into smaller units
according to the restrictions of the database system used.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:Note Still Valid in Market place.
"SAP Note 1111155 - FSCM-DM: Termination "Open SQL
statement is too large."
Note Language: English Version: 10 Validity: Valid Since 07-28-2010
Summary
Symptom
When you access dispute case using the integration (creating dispute case
using FI transactions (for example, FBL5N), clearing items to which dispute
case have been assigned), the system issues the dump "Open SQL statement is
too large".
The error occurs if there are many (more than 1000) dispute cases for a
customer.
Other terms
FBL5N, FBZ1, F-32, integration
Reason and Prerequisites
This problem is due to a very large dispute case volume.
Solution
Import the relevant Support Package or implement the attached correction
instructions.
Header Data
Release Status: Released for Customer
Released on: 07-28-2010 08:02:45
Master Language: German
Priority: Correction with medium priority
Category: Program error
Primary Component: FIN-FSCM-DM Dispute Management
Valid Releases
Software Component Release From
Release
To
Release
and
Subsequent
SAP_APPL 600 600 600
SAP_APPL 602 602 602
SAP_APPL 603 603 603
SAP_APPL 604 604 604
SAP_APPL 605 605 605
PI 2004.1 2004_1_47" -
Hide alv column of a standard tcode...
Hello Experts,
I was just given a task to hide a certain column in a standard tcode(LI14). So what
I tried first was to just create a transaction variant but it did not work since
the column that I need to hide is an alv list display. So I debugged the transaction
and it calls another standard program but it doesn't contain any ALV related FMs either in
the calling or the called program.
Anyone encountered this type of problem?Hi,
I just debug the standard transaction(LI14) and it calls another program that to my surprise, does not use ALV but uses WRITE statement instead. I asked our functional guy and he said that there are no config available for it. So I think I'll just create a custom program for this one. -
Hi all!
As we are all familiar, SAP standard tcodes have some naming patterns. I have found this website (http://www.geocities.com/SiliconValley/Program/8650/trantips.htm) which contains good tips about this pattern.
However, it has more details related to Finance tcodes. Do you know any other references regarding the topic?
Thank you!Hi Thanks for sharing the info....
I would like to add to this......
GO to Transaction SE93
and search for the required module like this
F* -
Finance
M* -
Materail
V*-------SD
FK
MK
XK
XD
MB
MR
ME
ME1
ME2
MM
VA
VF
FS
FB
O...........etc
Reward Points if useful
Thanks & Regards
vinsee -
Prob in getting Mail body for the standard tcode F150(Dunning).
Hello all,
I am using F150 for the dunning notice print out.After seeing the display of the dunning notice once we come back it populates a popup window where it asks to send the mail to the particular mailid or not. I have used the BTE --- SAMPLE_PROCEE_00001040 and copied it as z function module and customised according to my requirement in order to get the mail id of the customer in the pop up.My mail is going to the customers mail id properly only but my prob is that we are not able to get any mail body for that particular mail.Where can we add the mail body text to that mail in the standard tcode f150.can any one suggest is it possible or not.
Regards,
Pavani.
Edited by: Pavani Rayappureddi on Aug 11, 2009 11:21 AMsolved my self.
added C_ITCPO-TDTITLE = 'Pending Receivables Statement-XXX GROUP'.
in the bte code. -
To call standard tcode in webdynpro( thru webgui) : Assistance class
Hi Gurus,
I have an alv display in which the vbeln entries have link to action control.
i.e when i click vbeln( sales order no), it should open a new window through its/webgui.
1.I am getting following error when i activate , get_execute_location is private/protected.
2. How do i go about the following code:
wd_comp_controller->execute_get_location(
IMPORTING
e_host = lv_host
e_out_protocol = lv_out_protocol
e_port = lv_port ).
Within my method of my assistance class I call an interface in class cl_http_server to procure my host,
protocol and port number.
CALL METHOD cl_http_server=>if_http_server~get_location
IMPORTING
host = e_host
port = e_port
out_protocol = e_out_protocol.
Can some one explain in detail.
Best Regards,
Navin Fernandes.Hi Navin,
To display a standard tcode in your webdynpro application using ITS you can use the following code
DATA: url TYPE string,
host type string,
port type string.
*Call below method to get host and port
cl_http_server=>if_http_server~get_location(
IMPORTING host = host
port = port ).
*create URL
CONCATENATE 'http'
'://' host ':' port
'/sap/bc/gui/sap/its/webgui/?sap-client=&~transaction=' 'SE11'
INTO url.
*get the window manager as we are opening t code in external window.
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
* call the url which we created above
lo_window_manager->create_external_window(
exporting
url = url
receiving
window = lo_window ).
lo_window->open( ).
Hope this helps!
Best Regards,
Radhika Vadher. -
How to create button in application toolbar in sap standard tcode va03
Hi Gurus,
I want to create a button in the application tool bar of a sap standard tcode : va03.
Can some one help me with this..!
Best Regards,
Navin Fernandes.
Edited by: NAVIN FERNANDES on Aug 12, 2010 10:02 AM
Edited by: NAVIN FERNANDES on Aug 12, 2010 10:07 AMGo to the coresponding PF status and edit using modification assistant.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/19762743b111d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/83/7a18cbde6e11d195460000e82de14a/frameset.htm
Regards,
Nikhil -
How to get the form name which is used in standard tcode like me23n in sap
how to get the form name which is used in standard tcode like me23n in sap
Moderator message: four out of four threads locked, please read and understand the following before posting further:
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
Edited by: Thomas Zloch on Nov 18, 2011 1:32 PMhow to get the form name which is used in standard tcode like me23n in sap
Moderator message: four out of four threads locked, please read and understand the following before posting further:
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
Edited by: Thomas Zloch on Nov 18, 2011 1:32 PM -
Pop up screen needs to be added to standard tcode
Hi all ,
"How to add a pop - up screen to standard Tcode. "
I want to add a pop up - screen to the tcode : CO15.
In this Tcode i will enter the Production order and press enter.
In the next screen I will give the quantity (for eg. 5) for that production order and also date fields .
When I click on the save button, I want to display a pop-up screen giving all the 5 items and also checkbox for each item. The user will then check whatever number of items he wants for eg he will check 3 items and press enter button which(enter button) also needs to be put in that pop up screen.
Next time he want to check the other 2 items also.Initially he has checked the 3 items.
So this time the POP-UP screen should display the rest 2 items which were not checked .
Edited by: peter k on Oct 27, 2008 5:24 AMWas it a pop-under?
Because far as I know they couldn't fix that. Only stop pop-ups.
If you want to stop them for real, then install Firefox web browser and the NoScript add-on.
Head to Firefox toolbar > customize and drag the Temp Allow All Button to the toolbar area.
When you surf, your Javascript will be turned off by default, and if you need it, then you click the Temp Allow All Button and it loads, therefore reducing the pop-unders and pop-ups drastically.
Also add Ad Block Plus too for more less hassle free surfing. -
I want to restrict the display of F4 values in the standard tcode
In the standard tcode F-22 , for the customer display(F4 help values) ,i dont want to display a group or set of customers to be displayed. Which is the best way of doing this?
Thanks .
Edited by: peter k on Jan 19, 2009 7:27 AMHi Peter K,
Hope this will help you https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/707439da-ead9-2910-5c97-af6ca0b6fbb1
Cheers,
Pravin S -
Standard tcode is taking more time
Hi,
When i am trying to delete or save any shipments through standard tcodes VT01N and VT02N. It is taking more time to process. Please tell me the solution to increase the performance.Hi Shruti,
Whenever you face an issue with a standard SAP functionality, its wise to consult SAP notes @ [http://service.sap.com|http://service.sap.com]. I did a search using the string "Saving shipment VT01N VT02N performance" and got some very useful notes on the issue.
Some useful notes are:
859483, 391287, 391287 .... you would want to refer to the version and apply using BASIS help (SNOTE transaction and only if applicable for your version release).
Regards,
Aditya -
Is there ant standard tcode for list of vendors, suppliers in ECC 6.0
can any body tell me is there ant standard tcode for list of vendors, suppliers in ECC 6.0
Hi
The standard Tcode for list of vendors is S_ALR_87012086 - Vendor List .
Check whether it is helpful to you or not.
Plz assign points if it is helpful.
Regards
Tapan -
Creating Ztcode for standard Tcode - f.13
Hi,
I have created a Ztcode zf.13 for a standard tcode f.13 in FI. As per client requirement I have to make certain changes to it like the document should be posted irrespective of the business area or profit center considering just Assignment & the debit & credit amount mateches.
Regards,
Viraj
Moderator Message: Do not expect the forum to do your work for you.
Edited by: kishan P on Dec 10, 2010 10:35 AMHi Viraj,
please explain your question properly
In case you are trying to modify the code
copy Program SAPF124 (program for f.13) to Z program ... and then make changes as per your requirement.
Attach your Z program to ZF.13 tcode
Regards,
Seema
Edited by: Seemanthini R on Dec 7, 2010 12:44 PM -
F4 Validation in standard tcode
hi all,
can anyone please tell me that how would i validate F4 help in standard tcode? actually i want that when user go to create a material then in View 'costing1' there is a field 'profit center' and there are several fields in F4 while i need only 3 profit centers only for 3 plants. there is user exit 'EXIT_SAPLMGMU_001' . so can anyone please tell me how wud i do? tell me code also.
regards saurabh.how to create F4 for the standard transaction
-
How to freeze fields on standard Tcodes.
Dear SAP Guru
Can any one plz let me know how to freeze the fields on standars T-codes, as i want our end users to use only particular fields on standard tcodes in SAP
Thanks in Advance
Bhushan[http://theguruspeaksaboutsap.blogspot.com/2007/12/creation-of-variant-for-making.html]
use transaction SHD0 as in the above link
Maybe you are looking for
-
Patch-ftf-11.2.3-11.5.2013.zip
I downloaded this patch this evening. One of the jar files in the install instructions is SCR-5.1.jar, but the jar file contained in the zip file is SCR-5.0.jar . Is this simply a mistake in the install instructions? Brad Johnson
-
I can't see image thumbnails in my library.
not able to view thumbnails to edit . i set the image size to 12 megs file size and that didn't help. the pics are jpegs. the app will open the file and then I can see the pic. but it isn't the one I want. thanks, BottomShark
-
Solaris 10 mpio and Emulex LP11002 HBA
Greetings, Has anyone tried to use a Emulex LP11002 HBA with Solaris 10 mpio driver ? Kindly advise. Thanks and Regards
-
Parallels error after updating OSX
I just updated OSX (which I hadn't done on this computer in a long time) and now whenever I open my windows XP parallels VD, it crashes (as per usual with windows). when it boots it asks if i want to boot into safe mode or command line or normal and
-
we just came home with new macbook air=)and i wish to ask some questions which havent yet figured out yet by playing with it for 30mins^^ thanks=) 1. how to i make the 2finger scroll not invert as on macbook pro, sliding down makes page go down but s