QQMA0011 - Number of fields

Dear All
We are planning to introduce some user defined fields in Notifications & Notification Tasks. We are in the design phase so we do not have any technical consultants with us. My question is, is there a simple way to understand what are the limitations of user-exits? For example, how can I understand how many user fields can be added by using QQMA0011?
To be more specific, we would like to link each individual Notification Task with multiple Equipment and Functional Location Records. One Task may cover multiple assets at the same time.
Regards
GA

Hi Goraj,
You can use only TWO lines. You need to accommodate all your required fields in these 2 lines as show in the picture below.
Also these posts will be of use to you.
User-fields in Catalog Tabs of Notifications - QQMA0008,10,11 and 12
User fields in key PM/QM Objects
Jogeswara Rao K

Similar Messages

How to find out the number of fields in generated proxy structure?

Hi All,
Can anybody help me to find out the number of fields in generated proxy structure in back end system along with controller fields.
i know how to get number of fields in XI system but i want the number of fields in back end system when we generate proxy including automatically generated controller fields.
Thanks in advance.
Regards,
Ujwalkumar

U mean u want to know at runtime?
Get the output from ur proxy as a string, count the number of "<" characters and divide it by 2. :-P
Of course, you'll have to treat the header fields separately.
Regards,
Henrique.

The source and target structure have a different number of fields

Hi,
I am new to workflow and I am trying to create an attachment in Workflow (SAP ECC 6.0) and pass it through to a User Decision (User Decision works fine) however the workflow is failing on the attachment step with u2018The source and target structure have a different number of fieldsu2019. The bindings check ok. Please see details below.
I have used document u2018Creating Attachments to Work Items or to User Decisions in Workflowsu2019 by Ramakanth Reddy for guidance. Thanks in advance.
1) Workflow containers (SWDD)
WORKITEMID (import)
ZSWR_ATT_ID (export)
SOFM (export)
2) Task Container (PFTC)
1 Import parameter defined u2013 WORKITEMID (swr_struct-workitemid)
2 Export parameters defined
- SOFM (Ref. obj. type SOFM)
- ZSWR_ATT_ID (swr_att_id-doc_id)
Binding task -> Method
Binding for 1 parameter (import) defined
Task <- Method
Binding for 2 parameters (export) defined
3) Z BOR object created with a Method, Method Parameters and Event (SWO1)
1 import parameter defined
2 export parameters defined
Method calls FM SSF_FUNCTION_MODULE_NAME, CONVERT_OTF, SCMS_XSTRING_TO_BINARY and SAP_WAPI_ATTACHMENT_ADD
Workflow is triggered by FM SAP_WAPI_CREATE_EVENT, Return_code = 0
Event_id = 00000000000000000001
Test results
A) Triggered by ABAP/ FM SAP_WAPI_CREATE_EVENT - SWI2_DIAG results
Work item 14791: object <z bor object name> method <method name> cannot be executed. The source and target structure have a different number of fields (this message is repeated 3 times). Error handling for work item 14791. No errors occurred -> details in long text (message is repeated 3 times).
Message no. WL821, OL383, WL050 in long text
B) Z BOR Test method <execute>
Enter workitem id.
Runtime error - Data objects in Unicode programs cannot be converted. The statement "MOVE src TO dst" requires that the operands "dst" and "src" are convertible. Since this statement is in a Unicode program, the special conversion rules for Unicode programs apply.
In this case, these rules were violated.
Program                             SAPLSWCD
Include                                LSWCDF00
Row                                    475
Module type                        (FORM)
Module Name                      MOVE_CONTAINER_TO_VALUE
C) Z BOR Test method <debugging>
Enter workitem id.
SAP_WAPI_ATTACHMENT_ADD, return_code = 0, message_lines = Attachment created
both swc_set_element container work ok
Runtime error occurs after end_method executed. Data objects in Unicode programs cannot be converted.
D) Workflow test
Enter workitem id <execute>
Task started> Workflow log> Status = Error
Workflow errors in Attachment step (however Office document can be viewed in details for step).

Problem has now been resolved. Problem was related to use of swr_att_id structure and swc_set_element statement in BOR program - problem resolved by only setting w/f container to swr_att_id-doc_id.

SIgnificance of Bank Number(BNKLZ) field in Master data

Hi,
I am working on Bank Master data setup in ECC6 and have a question regarding the significance of Bank Number(BNKLZ) field.
In IMG settings -> General Settings->Set Countries->Set country specific checks, if Bank Key = 1 i,e Bank Number then in T-code FI01 for Bank Master, the Bank Number field is display only and is automatically copied from Bank Key value.
However if Bank Key = 4 in config, the Bank Number field becomes open for input in FI01.
My question is, what is the significance of Bank Number visa viz Bank Key, in Master data - Bank, Vendor (payment transactions) and Customer etc.
If in the second option ie, Bank Key = 4, I leave the Bank Number blank while creating Bank Master data, will it affect any other processes related to Payment Process etc?
SAP allows me to leave all of the control data Blank while creating the Bank Key. Will this not create problems for Vendor or Customer Payment processing etc?
What is the significance of the Control Data section on FI01 while creating a Bank Key?

Hi,
bank key (BANKL) is an identification of the bank defined by the user, bank number (BNKLZ) is used to dientify the bank in payment order file, so this should be oficial code of the bank.
Example: Each bank in Germany is identified by BLZ - that's the bank number. Deutsche Bank in Berlin has BLZ 10070000.
So, I can use key 1 in country specific checks customizing and have bank key same as bank number, i.e. 10070000. This helps me to enter bank data into master records, because BLZ is always stated next to bank account number on the invoice.
Or I can use key 4, create the bank with bank key DEUT_BERLIN and enter bank number 10070000. My payment order will be correct, but in vendor master date in the bank key column will be DEUT_BERLIN.
My recommendation is to use key 1 and keep bank key same as bank number.
Regards,
Michal

Number of fields in the table

Hi experts,
How do you obtain the number of fields of a particular table ?
I want the count of the fields of a table.
Thanks in advance,
Chithra.

Check the code below:
DATA: d_ref TYPE REF TO data,
i_alv_cat TYPE TABLE OF lvc_s_fcat,
ls_alv_cat LIKE LINE OF i_alv_cat,
fname TYPE fieldname,
ncomp(9) TYPE n,
rcount(9) TYPE n,
fcount(3) TYPE n.
TYPES: BEGIN OF itab1,
message(50) TYPE c,
END OF itab1.
DATA: g_itab1 TYPE STANDARD TABLE OF itab1.
DATA: wa_itab1 TYPE itab1.
ncomp = 1.
rcount = 0.
TYPES: tabname LIKE dcobjdef-name,
fieldname LIKE dcobjdef-name.
PARAMETER: p_tablen TYPE tabname. "Input table field
DATA: BEGIN OF itab OCCURS 0.
INCLUDE STRUCTURE dntab.
DATA: END OF itab.
FIELD-SYMBOLS : <f_fs> TYPE table,
<f_fs2> TYPE ANY,
<f_fs3> TYPE ANY,
<f_fs4> TYPE ANY.
REFRESH itab.
CALL FUNCTION 'NAMETAB_GET' "Fetches the fields
EXPORTING
langu = sy-langu
tabname = p_tablen
TABLES
nametab = itab
EXCEPTIONS
no_texts_found = 1.
LOOP AT itab .
ls_alv_cat-fieldname = itab-fieldname.
ls_alv_cat-ref_table = p_tablen.
ls_alv_cat-ref_field = itab-fieldname.
ls_alv_cat-seltext = itab-fieldtext.
ls_alv_cat-reptext = itab-fieldtext.
APPEND ls_alv_cat TO i_alv_cat.
fcount = fcount + 1.
ENDLOOP.
WRITE:/ fcount.
WRITE: ' number of column'.
internal table build
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = i_alv_cat
IMPORTING
ep_table = d_ref.
ASSIGN d_ref->* TO <f_fs>. " Dynamic table creation with fields of the
*table
DATA: l_field TYPE fieldname,
l_field1 TYPE fieldname.
SELECT * FROM (p_tablen) INTO CORRESPONDING FIELDS OF TABLE <f_fs>.
"Fetching of the data from the table
rcount = 0.
LOOP AT <f_fs> ASSIGNING <f_fs2>.
rcount = rcount + 1.
DO fcount TIMES.
"Here u can check the validations and process
ASSIGN COMPONENT ncomp OF STRUCTURE <f_fs2> TO <f_fs4>.
IF NOT <f_fs4> IS INITIAL.
MOVE <f_fs4> TO l_field1.
ncomp = ncomp + 1.
ELSE.
CONCATENATE 'IN ROW' rcount 'COLUMN' ncomp 'IS BLANK' INTO wa_itab1.
APPEND wa_itab1 TO g_itab1.
ncomp = ncomp + 1.
ENDIF.
ENDDO.
CLEAR:ncomp.
ENDLOOP.
LOOP AT g_itab1 INTO wa_itab1.
WRITE:/ wa_itab1 'is blank'.
ENDLOOP.
regards
Kannaiah

How to give out a status message indicating the number of fields selected

Hi experts,
I hope some one might have done what I'm trying to do. Could some one please show me how to give out a status message saying for example how many fields have been give out(or selected) in the t_ouput in an alv grid? Is there a FM that could do this? I mean like giving the FM the t_output and it will show a status message with the number of fields selected?
Thank you for your input.
Nadin
Message was edited by:
nadin ram

Hi Ram,
Write this code,
Message 'Select Only Ten Fields' type 'I'.
It displays The Message in Message Box.
Or if you want the Error Message means,
Message 'Select Only Ten Fields' type 'E'.
Thanks,
reward If Helpful.

Number of fields in Openhub not displayed correctly

HI all,
I have created an OpenHub destination with destination type FILE. Created a logical file and assigned the same to the Physical path.
After I load the data to the Openhub, I cannot find all the columns what are present in the OpenHub.out of 99, only few like 63 to 86 are being displayed in the output.
1. Will there be any restriction to the number of fields displayed in the Application server. \
2. The final number of columns are not consistent and its different for different records in the same data load.
Any help is highly appreciated.
Best Regards

hi check this error
check the transformation mapings
or check this may help you
Error message: 'Destination not supported' (Error Code RSBO 102)
Firstly the corrupt Open Hub destinations need to be repaired. To do this you need to check the table RSBOHDEST, for all Open Hub Destination entries where the field DESTYPE is initial/empty or is equal to 'FILE', you must change the DESTYPE for such entries to TAB in the table RSBOHDEST.
http://wiki.sdn.sap.com/wiki/display/BI/CommonIssueswithOpenHub

Select a number of fields between one field and another

Hello,
Is there any way to make a SELECT to show a number of fields between one field and another,
without writting all the fields one by one ?
For example, I have one table with these fields:
TABLE EMPLOYEE:
ID_EMPLOYEE NAME PHONE CAR AGE MARRIED
and I just want to make a SELECT who shows only fields from NAME to AGE, but i don't want to
write in the SELECT all the fields one by one.
Is this possible?
Thank you very much.
Sorry for my english it's not very good.

Swam wrote:
Hello,
Is there any way to make a SELECT to show a number of fields between one field and another,
without writting all the fields one by one ?
For example, I have one table with these fields:
TABLE EMPLOYEE:
ID_EMPLOYEE NAME PHONE CAR AGE MARRIED
and I just want to make a SELECT who shows only fields from NAME to AGE, but i don't want to
write in the SELECT all the fields one by one.
Is this possible?
Thank you very much.
Sorry for my english it's not very good.If you use the DBMS_SQL package to execute your query you can reference the columns by position rather than name.
One examples of using DBMS_SQL package:
SQL> ed
Wrote file afiedt.buf
1 DECLARE
2    cur       PLS_INTEGER := DBMS_SQL.OPEN_CURSOR;
3    cols      DBMS_SQL.DESC_TAB;
4    ncols     PLS_INTEGER;
5    v_min_col NUMBER := 2;
6    v_max_col NUMBER := 4;
7    v_val     VARCHAR2(4000);
8    v_bindval VARCHAR2(4000);
9    v_ret     NUMBER;
10    d         NUMBER;
11 BEGIN
12    -- Parse the query.
13    DBMS_SQL.PARSE(cur, 'SELECT * FROM emp', DBMS_SQL.NATIVE);
14    -- Retrieve column information
15    DBMS_SQL.DESCRIBE_COLUMNS (cur, ncols, cols);
16    -- Display each of the column names and bind variables too
17    FOR colind IN v_min_col..v_max_col
18    LOOP
19      DBMS_OUTPUT.PUT_LINE ('Column:'||colind||' : '||cols(colind).col_name);
20      DBMS_SQL.DEFINE_COLUMN(cur,colind,v_bindval,4000);
21    END LOOP;
22    -- Display data for those columns
23    d := DBMS_SQL.EXECUTE(cur);
24    LOOP
25      v_ret := DBMS_SQL.FETCH_ROWS(cur);
26      v_val := NULL;
27      EXIT WHEN v_ret = 0;
28      FOR colind in v_min_col..v_max_col
29      LOOP
30        DBMS_SQL.COLUMN_VALUE(cur,colind,v_bindval);
31        v_val := LTRIM(v_val||','||v_bindval,',');
32      END LOOP;
33      DBMS_OUTPUT.PUT_LINE(v_val);
34    END LOOP;
35    DBMS_SQL.CLOSE_CURSOR (cur);
36* END;
SQL> /
Column:2 : ENAME
Column:3 : JOB
Column:4 : MGR
SMITH,CLERK,7902
ALLEN,SALESMAN,7698
WARD,SALESMAN,7698
JONES,MANAGER,7839
MARTIN,SALESMAN,7698
BLAKE,MANAGER,7839
CLARK,MANAGER,7839
SCOTT,ANALYST,7566
KING,PRESIDENT,
TURNER,SALESMAN,7698
ADAMS,CLERK,7788
JAMES,CLERK,7698
FORD,ANALYST,7566
MILLER,CLERK,7782
PL/SQL procedure successfully completed.
SQL>Of course, if you were going to do this properly you would bind the correct datatypes of variables based on the types of the columns (the type information is also available through the describe information)

How to control the number of fields in the Advanced mode in af:query

Hi,
How to control the number of fields in the Advanced mode in <af:query>?
Say i have 20 fields in my table and i created a view criteria with 2 fields. It would work perfectly in Basic mode. But in the Advanced mode all other fields selection is possible on clicking the ADD Fields button. I did not want the client to make a search with all 20 fields. Only 10 fields are to be listed in the Advanced Mode even though there are 20 fields in my table.
How do i control the list of fields in ADDFields button?
Any ideas?
KR

You can uncheck the Querable property of the attributes which you need not show up in the Advanced Mode (but they will not show up in other modes too !) or programatically set the same as mentioned here -
http://adfcodebits.blogspot.com/2010/11/bit-27-setting-view-object-attributes.htmlAlso you can hide the AddFields button as suggested here - http://www.notjustjava.com/2011/12/cool-tips-to-showhide-components-of-the-query-control-of-adf/

Pan number compulsory field while creating vendor code

is it possible to make pan number compulsory field while creating vendor code

Dear Sanjeev
you can make PAN number mandatory use t.code shd0 in that first give transaction code than give screen variant detail for screen variant program go to xk01 and then go to pan field here click on f1 then click on technical specification u can copy the program and screen name after that click on create tab the xk01 screen field comes again go to pan field double click on that field and then select this as required field and save . then go to transaction variants give the transaction name and add a row in which insert row and gives screen variant , program and screen then save it now move to standard variant give your screen variant name and activate now your pan field is mandatory . if you have any problem in understanding i can provide you the screen shot also on your mail. provide your email id
Award points .
Regards

Number/ unit field in infotype 0015

Hi Experts,
There is a number/unit field in infotype 0015. What is the exact use of this field? Can we make payments by this field? Like if i want to pay an employee 2days extra Basic salary due to some reason, then how shd i configure my wage type so that system automatically calculate the amount by entering the number/ unit field.
plz help
regards
Kunal

If i enter some number/unit, then how the system will calculate the amount for that.
Like if i want to pay an employee 1day extra salary due to some reason and i want to pay this through the Ex-gratia wage type, shd i just enter the number=1 and unit =days??
System is not paying anything for this values.
plz help
regards
kunal

Need to generate PDF file from OAF with "n" number of fields

Hi All,
I have a requirement in OAF to generate PDF file with n number of fields in PDF output. PDF output could have some times 2 fields or 3 fields or 7 fields too in some condition and it will be based on one parameter. This output will be looks like below given scenarios:
Example Scenario I
Emp No | Emp Name | Dept No | Job |
11 | Abc | 10 | MGR |
Example Scenario II
Emp No | Emp Name |
11 | Abc |
Please let me know if any one know how to go about it.
Thanks in advance,
Arvin
Edited by: user636850 on Jan 26, 2011 6:11 AM

Hi All,
I have a requirement in OAF to generate PDF file with n number of fields in PDF output. PDF output could have some times 2 fields or 3 fields or 7 fields too in some condition and it will be based on one parameter. This output will be looks like below given scenarios:
Example Scenario I
Emp No | Emp Name | Dept No | Job |
11 | Abc | 10 | MGR |
Example Scenario II
Emp No | Emp Name |
11 | Abc |
Please let me know if any one know how to go about it.
Thanks in advance,
Arvin
Edited by: user636850 on Jan 26, 2011 6:11 AM

Number database field treated as String in formula when using 64bit runtime

Hey just a quick shout out to those with the above problem or those following the now "closed but unanswered" thread by the same name - if you're getting "A string is required here" error messages after switching over to the 64-bit runtime, or other weird loss of formatting issues, then try turning off the "Verify on First Refresh" or "Verify Stored Procedures on First Refresh" options in File | Report Options... as the case may be.

Previous post was here.
Number database field treated as String in formula when using 64bit runtime
Thanks for the find ezachman.

SQL Loader :variant number of field and delimeiter .

I want to load data into table using SQL LOADER.
Challenge I am facing is fields are separated either by ',' or '.'
Eg:x0,y0,z0,a0.b0.c0.d0,p1,q1,r1
x1,y1,z1,a1.b1.c1,p1,q1
ie, the whole field, which contain '.' can be a join of any numebr of fields of maximum 30
ie the field a0.b0.c0.d0 => would be any number of fields separated by '.'
How to load these details into a table
Thanks in advance,
Arya Sreedhar.

Wouldn't it be better to process a decent file (with a single delimiter) instead of trying to fix the layout of an undecent file?

Maximum number of fields in material master

Hi,
Could you please help to understand how many fields can be added in material master Tab.
Example - If we create new material master tab as additional data and would like to add some fileds in that tab, is there a limit we can't add more than certain number of fields.
Please advise how many cloumns can be added as well in one tab.
Example
Material master additional data Tab (New)
feild 1 description field 4 description field 7 ......
field 2 description field 5 description field 8 ......
field3 description field6 description field 9 ........
I think the fields should be assigned to feild selection group which is reserved as for Z fields
Please confirm if my understanding correct for Z fileds
211-240 Reserved for customers
As I think only 20 field can be assigned to field selection group but My question is can we assign more than one filed selection group to one material master tab. I mean to increase the number of field to be added in new additional data tab can we add 111-120 Reserved for customers and 211-240 Reserved for customers to one material master additional data tab.
Thanks

Hi,
For add fields to material master, check Note 44410 - Integrating cust.-specific fields in matl master (and related notes).
Other note useful to understand the range of customer names in SAP: SAP Note 16466 - Customer name range for SAP objects.
I hope this helps you. If you need something else, let me know.
Regards,
Eduardo

QQMA0011 - Number of fields

Similar Messages

Maybe you are looking for