Quantity conversion error

Hi,
In me21n transaction , I am trying to create an purchase order for a specific material. But I get an error saying ''Quantity conversion error in net price calculation'' . I have checked the quantity conversion for that material but it seem to be right. Do anybody have any solution for this?
Regards,
Bhagyashree

Hi Andy,
Check the below document which helps u...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20report%20data%20in%20alternate%20units%20of%20measure
Also check these threads:
/thread/366900 [original link is broken]
Quantity Conversion Function Module
Unit of measure
Hope these helps u...
Regards,
KK.

Similar Messages

  • Open PO LSMW Quantity conversion error in net price calculation

    Hi gurus,
    I encountered an error as I was tring to upload purchase orders - "Quantity conversion error in net price calculation". What does this mean and how do I fix this?
    Please help
    Thanks

    Hi Jürgen,
    Where in the Material Master can I find the conversion ratio between both units?
    Also, I am trying to upload POs for Spare Parts and that's when I get the error. But when I try to use other materials like FGs, everything is ok. I can proceed with the upload without any problem
    Please help

  • ME21N--Quantity conversion error in net price calculation

    Hi MM experts,
    Issue: while creating PO, when attempting to add the net price for line item. but system removes the cost and gives the follow error message says "Quantity conversion error in net price calculation".
    The system was not able to convert the order unit into the purchase order price unit. Possible reasons:
    i) the conversion results in a net price that is too high, or
    ii) the conversion factor for the units has not been properly maintained.
    iii) Check whether the units of measure and their conversion factor are correct.
    I have checked material master>unit of measure> 1 PL = 22 KG maintained.
    Can you please tell me how to resolve this issue?
    Appreciated early response.
    Thanks in advance.
    Suresh

    Hi Suresh,
    Please check on Material Master Data - Accounting 1 tab - Price Unit
    Moshe

  • Quantity Conversion Error in Net Price Calculation

    We are currently using SRM 5.0 ECS where we created a material PO and had a problem with the product not having the language E maintain in the material master. This caused the PO to have status of "error in process"  Once we fixed this issue and tried to reprocess the PO we're not getting the following error message in the Application Monitor:
    No Instance of Object type PurchaseOrder has been created. External Reference
    Puchase Order still contains faulty Items
    Quantity Conversion Error in Net Price Calculation
    Has anyone seen this or know what we can do to resolve this so that the PO gets replicated in R3?
    Thanks in advance.

    Hi Robert,
    Regarding this backend error E 212 06 Quantity conversion error in net
    price calculation.         
    This error is because in the PO Order price unit is empty. And          
    quantity is null. So, please enter the quantity and order price unit          
    for this PO and order the PO again. Or you can retransfer the      
    PO manually using the FM BBP_PD_PO_TRANSFER_EXEC. (for this fm you need       
    to input the PO header guid, which you will get it from tx.BBP_PD             
    by providing PO number and object type as BUS2201).
    This has worked for other customers.
    Hope this helps,
    Kind Regards,
    Matthew

  • Quantity conversion error in net price calculation in BAPI_PO_CREATE1

    I'm creating PO from BAPI_PO_CREATE1 .here i'm getting follwing error
    quantity conversion error in net price calculation.
    plz guide me to remove it.

    Are you using quantities directly entered by the user while calling the function to do the net price calculation? If that is the case, you should use FM CONVERSION_EXIT_ALPHA_INPUT to convert the quantity from the external format into the internal one!
    Another possibility is that some customizing is missing for converting quantities in different unit of measures (like the quantity in pieces is known, but the pricing calculation is being done on kilos.. but the convertion between these 2 unit of measures is missing).
    Good luck!

  • Error in Quantity Conversion type.

    Hi all,
    I have created  quantity conversion types in transaction RSUOM."ZCRFNSC"
    In the Conversion Factor Tab,Dynamic Determination of Conversion factor i chosen as Using Refrence Info Object------0MATERIAL.
    In the UOM Tab.
    Source Unit TAB-- I have defined as UOM from data Records
    And in the Target UOM  i have set as Fixed Unit --"SC".
    Now when i am executing the report where i have apllied this conversion type it throws error
    "Inconsistent i/p parameter(I_TUOM, value SC)"
    Kindly help me tounderstand & get the solution for this error
    Points will be assigned....

    Dear Experts ,
    P101 condition type is not picking the MAP value in PO . It sometimes takes 0.00 or some other value other than MAP . Please tell me what could be wrong ?
    Regards
    Anis

  • Quantity Conversion in F & A Pricing

    Hello friends,
    This question is related to F & A Pricing in IS-Oil MAP solution.
    I am facing a problem while changing a Billing Document in VF02. In the pricing item conditions screen, when I try to click on the zoom button of a F & A condition type, I am getting the following error message.
    "Unable to convert between units of measure L15 and TO for material". But in the material master of the given material, the converion between TO and L15 has been maitained. 
    Also I am aware that the F & A pricing might also use the QCI component for the conversion. So anyone help me on where to look for the quantity conversion details specified for F & A pricing.
    Thanks in advance,
    Sankar.

    Dear Shankar,
    Adding TO in UoM group may lead to inconsistencies for those material documents posted already. Surprise that you see TO in QCI Test but not in UoM group.
    To analyse further, Please check in table LIPSO2 using the delivery document number and Item number and see whether you see a quantity for TO or other mass UoM such as KG. Also please share the below information.
    1. Transaction qty and UoM.
    2. Base Uom and quantity
    3. F&A Price quotation price units.
    Regards,
    Natarajan

  • Quantity conversion check failed for one item; all qty lines deleted

    Hi IS Oil Experts,
    Iam using the BAPI "BAPI_GOODSMVT_CREATE_OIL" for posting goods movement. I filled the additional quantities and unit of measures also in the BAPI table, But when tried to execute, Iam getting the error, "Quantity conversion check failed for one item; all qty lines deleted"
    Please anybody tell me what is the error from end for resulting this message.
    Thanks in advance
    Prathib

    Dear you!
    I also get the issue that you meet. Can you help me to process it, Please/
    Best regards, Huy.

  • Quantity Conversion in BI 7

    Hi All,
    I have followed the documentation to do a quantity conversion from BT (Bottle) to TO in BI 7. Since they are not in the same dimension, I therefore have determined type 4 : Use T006 if available, otherwise, use reference InfoObject. I have referred to InfoObject 0MATERIAL, inside it I have determined the base unit of measure and generate a system DSO to store the conversion factor information.
    But during my data transfer process, I keep hitting on error :
    No quantity conversion possible     RSUOM     65.
    Can anyone please help. Thanks.

    Dear Handoko,
    I have struggled with the same issue of unit conversion. Unfortunately for both of us, unit conversion across dimensions is NOT possible.
    However, there is a work around for this. You will have to find out from your functional consultants how much does 1 bottle weigh. Then in the transformations you can use this to do the unit conversion.
    Regards,
    Prem.

  • Arithmetical errors or conversion errors found in routine ROUTINE_0001recor

    hi,
    I am loading data from data source 2LIS_13_VDKON (Condition values) but get an error message from the PSA:
    "Arithmetical errors or conversion errors found in routine ROUTINE_0001 record 98 RSAU 507"
    I see nothing wrong in the mentioned record in the PSA. What is wrong? My load gets red...
    I write a formula in update rules in this passion
    IF "(Billing Quantity SU 0, KNVAL / INV_QTY SU, 0)"
    But the thing is the system says it is correct but in complete.
    I put . pulstop but it shows same error please it is high priority please give me replay.
    Regards
    Lakshmi

    Hi hema,
    Just check the record no. 98 in the PSA for the applicable formula
    Just try to debug the update rules fix the break-points in the routine and try to analyze the error.........
    Debug update rules:
    http://www.sd-solutions.com/documents/SDS_BW_How_To_Debug_Update_Rules_and_Transfer_Rules%20.html
    Debugging data upload in BW
    Hope this helps.............
    Rgs,
    I.R.K

  • Record 3162 :Arithmetical errors or conversion errors found in routine ROUT

    When I am loading data from 2lis_11_vakon,13_vdkon i am getting the error
    Record 3162 :Arithmetical errors or conversion errors found in routine ROUTINE_0001 record 3162
    I have seen all the previos post on this question but I didnot fing any correct answer for the soultion pls tell me how to solve this

    Hi,
    In case of  VAKON DS,We get this problem when the record has Order quantity = 0.Even I too had this problem. I solved this by Modifying the formula for Condition Rate in the update rule as sown below:
    IF( Order quantity = 0, Condition Value / Target quantity, Condition Value / Order quantity )
    And in case of VDKON DS , we get this problem when the record has Billing Quantity SU = 0.So use the formula like this:
    IF( Billing Quantity SU = 0, 0 , Condition Value / Billing Quantity SU )
    With rgds,
    Anil Kumar Sharma .P

  • Arithmetical errors or conversion errors found in routine ROUTINE_0007

    Hello All,
    I'm getting "Arithmetical errors or conversion errors found in routine ROUTINE_0007 " while loading data from R/3 (2LIS_44_POSREC)  to cube (0RT_C07)
    I'm not able to locate the routine. I;ve checked update rules, there is no routine. The error is due to Sales Quantity in BUn coming as 0.
    Thanks in advance
    Regards: Gaurave

    Hi,
    open your URules (RSU3); in the menu extras, display generated program;
    search for 0007; it could be a ROUTINE_0007 or a urule 0007 like form r0007_KEYFIGNAME.
    I don't think this will help you much but at least you'll identify which KF is raising the error.
    Sales Qty can be loaded with 0 for sure; check that your maaping in TRules and URules is correct...
    let us know,
    Olivier.

  • How to custom a conversion error in JSF page in JDeveloper

    According to the book "Core JavaServer Faces" p213 (fifth edition), if I add the following line to messages.properties file, and specifiy it in the faces-config.xml and .jsp file, then the displayed conversion error message should be my tailored one instead of the default. However, I still get the default error message. Besides, I didn't find "CONVERSION" variable in UIInput class. Is the book wrong? And what's the correct way?
    javax.faces.component.UIInput.CONVERSION=Please correct your input

    I didn't choose any special in JDeveloper IDE. I just selected "new" to create a file called "message.properties" and put the line there. I didn't specify converters excepts declaring the type in the Jave Beans. I guess the converting is done by the JSF framework automatically. It must be a JSF converter since I created the page as a JSF page.

  • What does the "conversion error" I get when converting a pdf file to Microsoft word?

    What is the "conversion error" I get when converfting a pdf file to aMicrosoft word?

    Adobe reader with export to PDF
    Sent from my iPhone 5
    Marty Kennedy

  • Error while impdp: ORA-02374: conversion error loading table

    Hi,
    I am trying to convert the character set from WE8ISO8859P1 to AL32UTF8 using expdp/impdp. for this I first convert WE8ISO8859P1 to WE8MSWIN1252 in source DB to get rid of “lossy” data. I created new database(target) with character set AL32UTF8 and nls_length_semantics = ’CHAR’ and created all the tablespaces as in source DB with auoexend on. I took full export (expdp) of source DB excluding TABLESPACE,STATISTICS,INDEX,CONSTRAINT,REF_CONSTRAINT and imported using impdp to target DB. I found below error in the import log file:
    ORA-02374: conversion error loading table "SCTCVT"."SPRADDR_CVT"
    ORA-26093: input data column size (44) exceeds the maximum input size (40)
    ORA-02372: data for row: CONVERT_STREET_LINE1 : 0X'20202020202020202020202020202020202020202020202020'
    I checked with select query on both DBs with below results.
    source DB:
    04:58:42 SQL> select count(*) from "SCTCVT"."SPRADDR_CVT";
    COUNT(*)
    74553
    target DB:
    04:59:24 SQL> select count(*) from "SCTCVT"."SPRADDR_CVT";
    COUNT(*)
    74552
    please suggest me a solution to this.
    Thanks and Regards.
    Edited by: user12045167 on May 9, 2011 10:39 PM

    Thanks for your update maher.
    09:15:53 SQL> desc "SCTCVT"."SPRADDR_CVT"
    Name Null? Type
    SPRADDR_PIDM NUMBER(8)
    CONVERT_PIDM VARCHAR2(9 CHAR)
    SPRADDR_ATYP_CODE VARCHAR2(2 CHAR)
    CONVERT_ATYP_CODE VARCHAR2(2 CHAR)
    SPRADDR_SEQNO NUMBER(2)
    CONVERT_SEQNO VARCHAR2(2 CHAR)
    SPRADDR_FROM_DATE DATE
    CONVERT_FROM_DATE VARCHAR2(8 CHAR)
    SPRADDR_TO_DATE DATE
    CONVERT_TO_DATE VARCHAR2(8 CHAR)
    SPRADDR_STREET_LINE1 VARCHAR2(30 CHAR)
    CONVERT_STREET_LINE1 VARCHAR2(40 CHAR)
    SPRADDR_STREET_LINE2 VARCHAR2(30 CHAR)
    CONVERT_STREET_LINE2 VARCHAR2(40 CHAR)
    SPRADDR_STREET_LINE3 VARCHAR2(30 CHAR)
    CONVERT_STREET_LINE3 VARCHAR2(40 CHAR)
    SPRADDR_CITY VARCHAR2(20 CHAR)
    CONVERT_CITY VARCHAR2(25 CHAR)
    SPRADDR_STAT_CODE VARCHAR2(3 CHAR)
    CONVERT_STAT_CODE VARCHAR2(25 CHAR)
    SPRADDR_ZIP VARCHAR2(10 CHAR)
    CONVERT_ZIP VARCHAR2(15 CHAR)
    SPRADDR_CNTY_CODE VARCHAR2(5 CHAR)
    CONVERT_CNTY_CODE VARCHAR2(5 CHAR)
    SPRADDR_NATN_CODE VARCHAR2(5 CHAR)
    CONVERT_NATN_CODE VARCHAR2(5 CHAR)
    SPRADDR_PHONE_AREA VARCHAR2(3 CHAR)
    CONVERT_PHONE_AREA VARCHAR2(3 CHAR)
    SPRADDR_PHONE_NUMBER VARCHAR2(7 CHAR)
    CONVERT_PHONE_NUMBER VARCHAR2(7 CHAR)
    SPRADDR_PHONE_EXT VARCHAR2(4 CHAR)
    CONVERT_PHONE_EXT VARCHAR2(4 CHAR)
    SPRADDR_STATUS_IND VARCHAR2(1 CHAR)
    CONVERT_STATUS_IND VARCHAR2(1 CHAR)
    SPRADDR_ACTIVITY_DATE DATE
    CONVERT_ACTIVITY_DATE VARCHAR2(8 CHAR)
    SPRADDR_USER VARCHAR2(30 CHAR)
    CONVERT_USER VARCHAR2(30 CHAR)
    SPRADDR_ASRC_CODE VARCHAR2(4 CHAR)
    CONVERT_ASRC_CODE VARCHAR2(4 CHAR)
    SPRADDR_DELIVERY_POINT NUMBER(2)
    CONVERT_DELIVERY_POINT VARCHAR2(2 CHAR)
    SPRADDR_CORRECTION_DIGIT NUMBER(1)
    CONVERT_CORRECTION_DIGIT VARCHAR2(1 CHAR)
    SPRADDR_CARRIER_ROUTE VARCHAR2(4 CHAR)
    CONVERT_CARRIER_ROUTE VARCHAR2(4 CHAR)
    SPRADDR_GST_TAX_ID VARCHAR2(15 CHAR)
    CONVERT_GST_TAX_ID VARCHAR2(15 CHAR)
    SPRADDR_REVIEWED_IND VARCHAR2(1 CHAR)
    CONVERT_REVIEWED_IND VARCHAR2(1 CHAR)
    SPRADDR_REVIEWED_USER VARCHAR2(30 CHAR)
    CONVERT_REVIEWED_USER VARCHAR2(30 CHAR)
    SPRADDR_DATA_ORIGIN VARCHAR2(30 CHAR)
    CONVERT_DATA_ORIGIN VARCHAR2(30 CHAR)
    SPRADDR_CVT_RECORD_ID NUMBER(8)
    SPRADDR_CVT_STATUS VARCHAR2(1 CHAR)
    SPRADDR_CVT_JOB_ID NUMBER(8)
    so here we can see its value is 40 (CONVERT_STREET_LINE1 VARCHAR2(40 CHAR)).
    shall i go ahead altering the column?

Maybe you are looking for