Queries from the Standard Inventory Cube 0IC_C03
What are the advantages/disdvantages of building the queries which have been delivered with the 0IC_C03 off a multicube. If no disdavantages any reason why SAP have not delivered a multicube with the model? Thanks
I dont see any disadvantages building the same queries off a multi. Many companies have a std to build queries of multi rather than the basic cube. Multi's most of the time are paired of several cubes and not rather on a single IC. So i dont think SAP can anticipate different needs of hell alot of customers.
Similar Messages
-
DataMart from Inventory Cube (0IC_C03)
I want to use the daily inventory cube to data mart and load to a cube/ods otherwise. I am aware that the values of non cumulative kf will not be available but that is okay I need the value of the cumulative kf.
Is there any issues or problems that people can see if I data mart from this cube? ThanksHi Niten,
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/8f/da1640dc88e769e10000000a155106/content.htm
Also check the Integartion (last) section in this link:
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
Bye
Dinesh -
Selective Deletion on Inventory Cube 0IC_C03 via Calendar Day
Hello Group
I am trying to do a selective delete to our inventory cube 0IC_C03 and found there is not an option to select day.
Does anyone have any thoughts on how do delete using day? Please note that my cube has been compressed and I do not have a request in the cube.
Thanks
FrankHi Frank,
REPORT ZRSDRD_SEL_DELETION .
DATA:
l_thx_sel TYPE rsdrd_thx_sel,
l_sx_sel TYPE LINE OF rsdrd_thx_sel,
l_s_range LIKE rsdrd_s_range,
l_t_range TYPE rsdrd_t_range,
l_t_msg TYPE rs_t_msg.
******************* 0CALDAY *****************
l_s_range-sign = 'I'.
l_s_range-option = 'EQ'.
l_s_range-low = '20030308'.
*l_s_range-high = .
l_s_range-keyfl = 'X'.
APPEND l_s_range TO l_t_range.
l_sx_sel-iobjnm = '0CALDAY'.
l_sx_sel-t_range = l_t_range[].
INSERT l_sx_sel INTO TABLE l_thx_sel.
CLEAR l_s_range.
REFRESH l_t_range.
************** 0PLANT **********************
l_s_range-sign = 'I'.
l_s_range-option = 'EQ'.
l_s_range-low = 'PLNT'.
*l_s_range-high = .
l_s_range-keyfl = 'X'.
APPEND l_s_range TO l_t_range.
l_sx_sel-iobjnm = '0PLANT'.
l_sx_sel-t_range = l_t_range[].
INSERT l_sx_sel INTO TABLE l_thx_sel.
CLEAR l_s_range.
REFRESH l_t_range.
************** 0MATERIAL ****************
l_s_range-sign = 'I'.
l_s_range-option = 'EQ'.
l_s_range-low = 'MATERIAL'.
*l_s_range-high = .
l_s_range-keyfl = 'X'.
APPEND l_s_range TO l_t_range.
l_sx_sel-iobjnm = '0MATERIAL'.
l_sx_sel-t_range = l_t_range[].
INSERT l_sx_sel INTO TABLE l_thx_sel.
CLEAR l_s_range.
REFRESH l_t_range.
CALL FUNCTION 'RSDRD_SEL_DELETION'
EXPORTING
I_DATATARGET = 'ZICRT_C37'
I_THX_SEL = L_THX_SEL
I_AUTHORITY_CHECK = 'X'
I_THRESHOLD = '1.0000E-01'
I_MODE = 'C'
I_NO_LOGGING = ''
I_PARALLEL_DEGREE = 1
I_NO_COMMIT = ''
CHANGING
C_T_MSG = L_T_MSG. -
Cubes on the Materials management Cube 0IC_C03
HI,
We need to create cubes on the Materials management Cube 0IC_C03 to take care of the huge inventory data we have . These will be a copy of 0IC_C03 and 0IC_C03 will be a staging layer.
Want to know how will the marker update will work on the new cubes?
Thanks.
NitinHi,
Look this link wll give u full detailes about marker updats and so on....
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
***********Asign Points if usefull*******
Cheers,
Satya -
How to identify the standard ods / cubes are delta capable or not?
Hi All,
How to identify the standard ods / cubes are capable of handling delta o not ?
Pls advise me on this!!
Thanks
PoojaHi Pooja
Delta capable is based on datasource but not on ODS or cube.
You can get this info from ROOSOURCE table,give data source name and check the field "DELTA".
If the field is left blank,it implies that the datasource is not delta capable.
Regards
Jagadish -
Changing the encoding to 256 kbps from the standard 128 kbps
I just read an article on the Internet about earbuds, especifically the Shure 4c, in which it was "highly reccomended" to change the encoding to higher levels such as 256 kbps from the "standard" 128 kbps.
The question is, once you have all your songs in iTunes downloaded at the standard 128 kbps, how do you change the encoding to 256 kbps, without deleting everything and transfering all your CDs, etc, all over again? Can it be done without the obvious, do it all over?
ThanksPedro, this will not be possible. You can't convert a lower bitrate to a higher one & gain anything in quality. The maximum data has already been compressed & removed under the lower bitrate & can't be put back. If you truly want the benefits of the higher bitrate, it would be much better to re-import your CD's at the 256 bitrate. Post back if you have any questions.
-
Does anyone know how to convert the output from the standard report to xml?
Does anyone know how to convert the output from the standard SAP report to xml?
since it a standard report which you cannot modify you can only do the following.
submit report exporting list to memory
then
list from memory and then
use the returned itab along with CALL TRNSFORMATION key word to convert to xml.
but this only going to place the whole list content (including data and formating lines,etc) into a xml element and not the actual data alone in the list . -
Problem Moving From the Standard Edition to the Enterprise Edition
Hi !
I am trying to move from Oracle 10g R2 10.2.0.1 Standard Edition to Oracle 10g R2 10.2.0.1 Enterprise Edition.
Platform is MS Windows XP PRO SP2
I follow all steps described in "Oracle® Database Upgrade Guide 10g Release 2 (10.2)" - section Moving From the Standard Edition to the Enterprise Edition.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14238/intro.htm#sthref10
The problem is that after update from St. edition to Ent. edition when I run:
select * from v$version - I see :
Connected to:
Oracle Database 10g Release 10.2.0.1.0 - Production
while I expect to see something like .....
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining Scoring Engine options
Am I wrong ? Why information in view v$version does not update after this ?
Regards,
Phil
Message was edited by:
user585467In your document you refer to the upgrade guide, this upgrade guide applies when you are upgrading from previous Oracle releases to 10g, not SE->EE.
If you want a procedure to upgrade the SE to EE, then follow this metalink note:
"How to Upgrade from Standard to Enterprise Edition ?
Doc ID: Note:117048.1"
If you performed this specific upgrade and you still see this error, then probably you are facing a bug, similar to the one described in "5844095", where the version is changed form SE->EE after 10.2.0.3 patchset application.
In your case it should be enough to apply 10.2.0.3 patchset to show it properly.
~ Madrid -
We are doing CRM Upgrade to Ehp3 and i am working with TC:WCF_CC
Please guide me how to open standard view in parallel in component workbench?
to add copy the attribute as well the associated type from the
standard to your enhanced view.?
Please adviceHi,
The only option i see is writing a BDC for a Mass Change or through Catt or E-Catt procedure, you can define any no. of fields there to copy and then you need to maintain the data in Excel file correctly, otherwise Ecatt is not going to upload the data.
Hope this helps.
Thanks
Aktar -
Customization of Inventory Cube - 0IC_C03
Hi gurus,
I need to implement the Inventory for my client using the Std cube 0IC_C03.
Here the client wants me to take the Total stock as the sum of the following stocks in MARD Table
LABST - Unrestricted
UMLME - Stock in Transfer
EINME - Restricted Use
SPEME - Blocked
RETME - Return
In the Standard Content we are considering only Stock in transfer & Blocked stock.
Please help me in suggesting what are the changes needed in Transformations for both 2LIS_03_BX and 2LIS_03_BF.
Thanks in Advance
SeshuHi ,
The fields LABST - Unrestricted
UMLME - Stock in Transfer
EINME - Restricted Use
SPEME - Blocked
RETME - Return
The fields other than blocked and Stock in transfer are not present in the datasources 2LIS_03_BX and 2LIS_03_BF .
If you need these fileds , you can go ahead with a function module datasource based on MARD , MSEG tables from where you can take these fields directly .
You can also refer to the links below for other options
Datasource for MARD table
Re: MARD Table - Not giving Stock in Transit Value
If in case the relevant fields are not seen in the datasource , you can go to transaction LBWE, CLICK ON 03 :Inventory Controlling(your case), click on maintainence tab and just drag the required fields to the left .
Also you need to delete and fill the setup tables after this step. -
No Selective Deletion on Inventory Cube 0IC_C03 via Calendar Day
Hi,
I need to repair my Inventory Cube <b>0IC_C03</b> for a certain date. To do that, I need to perform a <i><b>Selective Deletion</b></i> on the Cube and perform a <b>FULL REPAIR REQUEST</b> limited on that day only.
But to my surprise, I could not find a Calendar Day entry in the "<i>DeletionSelection</i>".
Is there a workaround or do I need to switch on anything?
--JkyleHi Roberto,
You are too humble! Everybody knows you are the <b>ONE</b>
(he heh from the <b>MATRIX</b> movie)
Anyway, I dont think Export Datasource would help. As you may know, Inventory Cube <b>0IC_C03</b> uses 2LIS_03_BX and 2LIS_03_BF data sources. This <b>CUBE</b> is somehow special.
To cut this problem short, I'll go straight to the point. <i>How could I perform INIT via 2LIS_03_BX and 2LIS_03_BF w/o R/3 downtime at all</i>? The reason I came to this <i>Selective Deletion</i> thing is to patch up the mess the INIT would introduce when there are users around by using a REPAIR FULL REQUEST only for that single day...
I hope you get what I mean...
Thanks!
--Jkyle -
Difference between Inventory cube 0IC_C03 and 0CP_IC_C1
Hi Gurus
I'd like to ask what's the difference between this 2 cubes in inventory? 0IC_C03 and 0CP_IC_C1 ? Any help will be much appreciated. Thanks in advance
- KitHi,
Well I am not an expert on Inventory but this is what I know:
0IC_C03 - LO Cockpit cube - Standard Inventory qty and values. This can be used for all purpose on a generic basis. This is not customized for any specific Industry sector. A standard ECC can use this as well as Retail can use this.
0CP_IC_C1 - This is also an Inventory cube containing value and quantities but this is more specifically designed for CP industry sector (Consumer Products). Here the BW transaction keys are different meaning that events/movement types specific to CP industry transactions will generate these transaction keys which gets updated to BW.
Also the cube 0CP_IC_C1 KPIs are average figures on the stock quantities and values (Exception Aggregation: Average Over Calendar Days). Whereas in 0IC_C03 the KPIs (NCKFs) are based on last value (Exception Aggregation: Last for Calendar Days)
Therfore if you are not aiming at Consumer Products Industry specific implementation, I would recommend 0IC_C03 cube. -
Damaged inventory cube 0IC_C03
Hi all,
My inventory cube is damanged because some data is not loaded via delta.
what i done is i stopped the back ground job which is running for compression of the request.i done Init with full repair request loaded missing data.(_03_BF). full load.
now my question is setting up marker for BF . my opening stock is around 2006. I loaded from 02.2007 to till the date. It is not a historical data(Because it after 2006). current data.
can i do compression with marker or without marker.
pls help me this is very important for me.
thanks .Hi
About the Marker - understood........I did....without checking it. that is not the issue. Please see below the detail of the error log. Listcube does not show any entries. the range of posting dates i loaded was 1/1/2000 to 1/10/2010....valuated stock only..........
this is the error message..........
Multiple entries found with NCUMTIM 'unlimited'; compression not possible
Message no. DBMAN380
Diagnosis
The time dimension contains multiple entries for which the time
reference characteristic (NCUMTIM) is set to 'unlimited'.
The value 'unlimited' is the maximum possible value for the time
reference characteristic. This value is reserved for markers in
non-cumulative InfoCubes and cannot be used for standard transaction
records.
System Response : Compression is terminated.
Procedure : Contact your system administrator.
Procedure for System Administration
To allow compression to be carried out, the entries must first be
removed from the InfoCube.
To do this, you can proceed as follows:
1. Delete all packages that contain records in which the time reference
characteristic has the value 'unlimited'. You can identify these
packages by using transaction LISTCUBE.
2. Reload these packages and create a rule in the transformation that
maps the value 'unlimited' to a year before 9000.
3. Using transaction RSRV, then delete all entries that are no longer
used from the time dimension.
The InfoCube can be compressed again. -
Inventory cube 0IC_C03 ,Stock on particular date
Hi All,
We are trying to get the stock on a particular date using cube 0IC_C03 ,but we are unable to get the total stock on a given date.
1)Ex: I want stock on 01.12.2009 ,but in the query output I am getting null values.
I am only getting the total stock quantity on the loaded date for ex:04.01.2010(which is my data loading date in to the cube).
2)And when we restrict 0calday with <=01.12.2009 ,i have to get the total stock till 01.12.2009
Thanks®ards,
SunithaHi,
Check
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
1)Ex: I want stock on 01.12.2009 ,but in the query output I am getting null values.
I am only getting the total stock quantity on the loaded date for ex:04.01.2010(which is my data loading date in to the cube).
For 2LIS_03_BX it will give the extracted date only
2)And when we restrict 0calday with <=01.12.2009 ,i have to get the total stock till 01.12.2009
try with below options.
Use :
0VALSTCKVAL " for Value
0VALSTCKQTY " for Qty
0CALMONTH " for Month
Use the above combinations in New Selections in columns and go it.
For Qty Opening:
New Selection bad drag abd drop following things
0VALSTCKQTY " for Qty
0CALMONTH " for Month and restrict with less then or equalto option variable (single value, user input) and set the offeset
value = -1 bcoz if user will give 12.2009 , so it will display 11.2009 closing stock, this is opening for 12.2009.
For Qty Closing:
New Selection bad drag abd drop following things
0VALSTCKQTY " for Qty
0CALMONTH " for Month and restrict with less then or equalto option variable (single value, user input) .
In the same way build for Value and other Keyfigures on 0IC_C03.
And
Drag & drop
0MATERAIL
0PLANT " Give some Input Variable.
See the steps.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
Thanks
Reddy -
How history tables like MBEWH applied to Inventory cube 0IC_C03
Hi BW Gurus,
Need your advice on this. How actually we can applied history tables like MBEWH, MARCH, MCHBH, MKOLH, MSKUH link with the cube? Is it create as master data or create customer exist to 2LIS_03_BF data source?
As my concern is how actually MonthYear data in this history table can map to transaction cube.
Appreciate your help. Thanks.
Regards,
Jeff ([email protected])HI Ramanjaneyulu ,
Follow these steps & PDF FILE AT THE END.
1. Activation:
Activate the extract structure MC03BF0 for the corresponding DataSources
2LIS_03_BX/2LIS_03_BF in the LO cockpit (transaction code in R/3: LBWE).
2. Initialization:
Initialization of the current stock (opening balance) in the R/3 source system with
DataSource 2LIS_03_BX (transaction code in R/3: MCNB)
Data is added to the setup table MC03BX0SETUP.
3. Setup of statistical data:
You can find the setup of statistical data under transaction SBIW in the R/3 system or use transaction code OLI1BW for material movement and transaction OLIZBW revolutions.
4. Loading the opening stock balance (2LIS_03_BX):
In the InfoPackage, choose the upload mode Create opening balance.
5. Compressing the request:
Compress the request containing the opening stock that was just uploaded. Make sure the "No marker update" indicator is not set. Please consider note very carefully 643687 before you carry out the compression of requests in stock InfoCubes.
6. Loading the historical movements:
Choose the upload mode "Initializing the delta process".
7. Compress the request:
After successfully uploading the historical material movements, the associated request has to be compressed. You must make sure the "No marker update"
indicator is set.
8. Start the unserialized V3 update or queued delta control run:
Transaction code: SBIW. Data is written from the extraction queue or central update table into the delta queue (transaction code in R/3: RSA7). Data is now available for extraction for BI system.
9. Start delta uploads:
Successive (for example, daily) delta uploads can be started with the DataSource
2LIS_03_BF from this point in time on.
<b>PDF ON INVENTORY:</b>
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Thanks,
kiran
Maybe you are looking for
-
Flexible Report - choose the cols (and # of cols) on the fly - PDF
Hi I have a user community who would like to be able to choose the columns in a "Flexible Report" when they want to run a report to output to the browser, and then to PDF. Now, I've played around a bit with setting up a number of page items - say 5 -
-
Oracle VM Server 2.2.0 V18336-01 for x86-64bit is actually 32 bit!!
Please note that the Oracle VM Server 2.2.0 V18336-01 download searched with x86-64bit is actually 32 bit. After install, simply do a "uname -a" and it will confirm this. As a result, if you try to use a x86-64 bit template for a guest, it will
-
External vga, monitor recognized, still no display
I have a L R60 9461-DXG, with Win7 (32bit) running very fine. Now trying to use an external monitor (L171p) but nothing works. While in boot and in combination with Fn+F7 the display doesn't come up (staying in power saving mode). In Win7 the externa
-
Extend desktop macbook pro-13" to imac screen
Hello, i can get my macbookpro hooked up to my i mac to use is as an extended desktop connection via thunderbolt cable who can give me advice. Mac book pro just brabdnew Imac bought in early 2012. regards
-
Cannot view vendor field in FS10n
Hi all, In Fs10n transaction i have selected to display vendor field from the standard layout . The vendor feild is coming blank in the display . Can anyone help this needy soul... thanks in advance. swapna.