Query on set

Hi all,
I have requirement like there is set a called zproj_net_ra under this set we have two subcategories zproj_rev and zproj_cst under each subcategory there are a range of values or set id's
so, now my requirement when i select a particular set id it should show me to which subcategory of set it belongs.
can anyone tell me how can i do this.
Thanks,
SriRatna

u have to make use of FMs
G_SET_FETCH or seach for more in se37 with gset.
tables are : SETNODE/LEAF.
regards
Prabhu

Similar Messages

Problem in Adhoc Query's set operation functionality.

Hi Experts,
I am facing problem executing Adhoc Query's set operation functionality.
In Selection Tab, following operations are performed :-
Execute a query and mark it as 'Set A'.(Say Hit list = X)
Execute another query and mark it as 'Set B'.(Say Hit list = Y)
In Set operation Tab, following operations are performed :-:-
Carry out an Operations 'Set A minus Set B'.
which results in Resulting Set = Z.
Transfer the resulting set 'in hit list' and press the copy resulting set button.
In Selection Tab, Hit list is populated with Z.
And when output button is pressed, I get to see 'Y' list and not 'Z' list.
Kindly help.
Thanks.
Yogesh

Hi Experts,
I am facing problem executing Adhoc Query's set operation functionality.
In Selection Tab, following operations are performed :-
Execute a query and mark it as 'Set A'.(Say Hit list = X)
Execute another query and mark it as 'Set B'.(Say Hit list = Y)
In Set operation Tab, following operations are performed :-:-
Carry out an Operations 'Set A minus Set B'.
which results in Resulting Set = Z.
Transfer the resulting set 'in hit list' and press the copy resulting set button.
In Selection Tab, Hit list is populated with Z.
And when output button is pressed, I get to see 'Y' list and not 'Z' list.
Kindly help.
Thanks.
Yogesh

Is there a way to consolidate calculations used in SQL Query Data Sets?

I am building SQL Query Data Sets against multiple DB Views which all have different date formats. I have the date parameter working well, but want to consolidate the changes that I have to do to it especially for the quarter. For example the SQL against a monthly view would use "where year_month > to_char(:ST_DATE, 'YYYY-MM')" which is not too hard, but to make that work for the quarterly view I need several concats and a decode to get a "> '2012-Q2'". I would like not to have to do this within every where clause. I had put this into a global element hoping to use that in a filter for the data set, but the filter does not have access to global elements only parameters.
Is there any way to refer to a calculated global element from the data set to do this? I am using Layout Templates, so even if I wanted to I could not do the condition within the template.
 Thanks,
 Rick

Change the following line to include the red coloured parts
<div class="MasterColumn" spry:repeat="ds4" spry:setrow="ds4" spry:hover="MasterColumnHover" spry:select="MasterColumnSelected">
{Dsp_#}{Dsp_WkDay}{Dsp_Event}
</div>
The add the following style rule to your document:
.MasterColumn span {
 display: inline-block;
I hope this helps.
Ben

Limit on Query result set

Limit on Query result set
Is there anyway in Oracle9i to limit query result
I.e.: we can limit query result in MySQL
SELECT * FROM EMP LIMIT 2;
Will return only top 2 records
Thanks in advance

SELECT * FROM EMP WHERE ROWNUM <= 2;

Create a CF Query Result Set in Java

I'd like to programatically build a ColdFusion query resultset inside of a Java class and return it to the calling application. See the Java psudocode below to see what I'm talking about:
public class MyClass {
 public coldfusion.sql.QueryTable getQuery() {
 // Create a query table object
 QueryTable myTable = ..?
 // Loop through some set of instance data for my class
 for(int c = 0; c < this.myWigets.length; c++) {
 int row = c+1;
 myTable.setField(row, nameCol, this.myWigets[c].name);
 myTable.setField(row, colorCol, this.myWigets[c].color);
 return myTable;
I've had stuff like this partially working in the past but had issues with things like query of queries and such probably due to the hacks used to create the QueryTable object. I'm mainly just checking in to see if there has been any progress made in this area. To me this seems like such an obvious thing for a Java developer working within CF to want to do. I'm surprised Adobe doesn't have an officially supported API for doing this sort of thing (or maybe I'm just too dumb to find it.) A few other notes... I'm not using CFX, and I'm not starting with a java.sql.ResultSet otherwise I would use the QueryTable(java.sql.ResultSet) constructor. I need to build this thing from scratch programatically.
Thanks for your time. I hope this question makes sense to someone out there.
- Mike

I appologize. I wasn't very clear with my original question.
I'm creating an instance of my Java class from within CF using createObject("java", "com.example.MyClass"). So based on the sample code in my original post on the CF side I'd like to do something like this:
<cfscript>
 myObj = createObject("java", "com.example.MyClass");
 myObj.doSomeStuff();
 myCFQuery = myObj.getQuery(); // Return a CF query from my java class
</cfscript>
... then do stuff like ...
<cfquery name="mySortedQuery" dbtype="query">
 select *
 from myCFQuery
 order by color
</cfquery>
I appriciate your suggestions so far. I have other solutions working already but they are not ideal. I was just hoping someone had a clean and as-hack-free-as-possible way of creating a ColdFusion query result set in Java and passing it back to CF.
Thanks again,
Mike

When calculation in query it set as amount digit setting and not make sense

Version: (Please provide the current version)
2005B Patch 35
Description of requirements: (Please provide a detailed description)
Because Taiwan NTD currency has 0 digit as amount digit, we need to set amount as 0 digit but price as 4 digits.
While we use query to write report and we use caculation in the query, the query tool
set the digit of the result as amount digit setting which is zero. No matter how we declaire
the type in query, we can't change the result. It is not make sense in report.
We suggest to cancle this digit setting function to use type in sql query.
Business needs: (Please describe the impact on your business, if the functionality is not realized)
We can't use query function for report.
Current Workaround: (Please describe the workarounds you are using at the moment)
Use outside report tool.
Proposed solution: (Please suggest how the new functionality should work)
We suggest to cancle this digit setting function to use type in sql query.

I have the same problem. Writing an email is a completely different thing from browsing the web and often you will need information from the website that includes the "mailto:"-link to write the mail. Thus opening the mail client in the same window really is not an example of ergonomic GUI design.
Manual workarounds will not work as nowadays often mailto-links are scrambled in a javascript to prevent spam. The new tab/window will then show the javascript command in the address bar, which will, of course, fail to function.
Opening Gmail in a new window or new tab by standard when using it as the default mailto-client in Firefox would be most welcome.
BTW this is how it works Chrome by standard, too. And I actually do not want to switch back just because of the handling of mailto-links. But it is too annoying on the long run.

Xcelsius with XMLA or XML Query Result Set

Hi Experts,
I want a direct connection from Xcelsius to my BW-Data. Because the new connection, coming with Fix Pack 2.1 is only avaiable for EHP 1 for NW 7.0 I tried to configure with XMLA and XML Query Result Set.
This Document tells the necessary steps: How to integrate Xcelsius 2008 with SAP NetWeaver BI without Integration Kit.pdf.
When I test my XML connection over http://<host>:<port>/TXmla/srvlet/TestXmla my Cubes will display.
So I do a Webservice-Connection with WSDL-URL. At Input-Values there are some entries like CUBE_NAME, CATALOG_NAME...
Output values arent avalible. How do I use these elements to show my Data in Xcelsius?
My Problem with the XML Query Result Set Connection is, that when I Log On to VC the following error appears:
You are not authorized to view the requested resource.
So I get the authorisationobjects: S_DEVELOP and S_RS_COMP as describe in 'How To... Resolve Visual Composer Issues'.
What values have I to enter by S_RS_COMP? And how can I enter my External Service in S_SERVICE. At the type WS the service isnt't avaiable.
Regards,
Jan

To use XMLA web service you need a wrapper function build to convert the XMLA output to the Xcelsius format. There are some documents available in SDN on how to do this.
You can use Live Office or Query as a Web service option to connect from Xcelsius to BW.
S_RS_COMP is the query ID which you are trying to access, S_SERVICE you can either give * or try to set up authorization log and see the expected value.

Error in testing XML query result set web service

Hi
I was trying to test a XML query result set web service in BW system with tcode wsadmin but getting error like
Cannot download WSDL from http://ibmbtsb02.megacenter.de.ibm.com:8070/sap/bw/xml/soap/queyview?sap-client=001&wsdl=1.1&mode=sap_wsdl: F:\usr\sap\W70\DVEBMGS70\j2ee\cluster\server0\apps\sap.com\com.sap.engine.services.webservices.tool\servlet_jsp\wsnavigator\root\WEB-INF\temp\ws1139464945296\wsdls\wsdlroot.wsdl (The system cannot find the path specified)
I had tried it first time few days ago and was able to test it successfully with the same configuration settings.
Could any one of you please provide any suggestion on this?
Thanks in advance
Sudip

hi
check this links it may help u.
http://help.sap.com/saphelp_nw04/helpdata/en/c3/e3072e65f04445a010847aa970b68b/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d8/3bfc3f8fc2c542e10000000a1550b0/frameset.htm
Regards,
Manoseelan

Max Query Count setting

Hello colleagues,
Probably you many know there is Max Query Count setting in MII.
Does any of you experience performance concerns by dealing with large number of query count? or does any of you have a recommendation for how to set max query count, e.g. not exceeding memory size to avoid memory swapping?
my customer want to increase this max count due to fluctuating record count. but they have concerns on such disadvantage in performance.
any of your experiences are welcome. Thank you,
Shiroh Kinoshita, SAP Japan

Shiroh,
Good to hear from you.
All queries have the RowCount setting, but we typically discourage people from just setting it to a high number. In some cases the data servers will limit this number to a max (something like 250000) but that doesn't mean that from a memory standpoint, or a customer patience level (especially in the browser) would ever get to that number of records.
Where is it that you are seeing the record count fluctuate, applets in the browser, query actions in a transaction?
What is it that makes the customer want to increase this to a high number?
Regards,
Jeremy

Downloading Query result set

Hi forum,
We have a requirement to download query result set and distribute it as a periodic job. Can open hub be used for this purpose?
Thanks in advance.
Regards,

Hai i beleive your using BI 7 you can meet your objective by using broadcast and schedule the same hope you have the right EP access too .
Goodday

Large query result set

Hi all,
At the moment we have some java classes (not ejb - cmp/bmp) for search in
our ejb application.
Now we have a problem i.e. records have grown too high( millions ) and
sometimes query results in retrieval of millions of records. It results in
too much memory consumtion in our ejb application. What is the best way to
address this issue.
Any help will be highly appreciated.
Thanks & regards,
Parvez

you can think of following options
1) paging: read only few thousands at a time and maintain a index to page
through complete dataset
2) caching!
a) you can create a serialized data file in server to cache the result set
and can use that to browse through. you may do on the fly
compression/uncompression while sending data to client.
b) applet based solution where caching could be in client side. Look in
http://www.sitraka.com/software/jclass/cs_ims.html
thanks,
Srinivas
"chauhan" <[email protected]> wrote in message
news:[email protected]...
Thanks Slava Imeshev,
We already have search criteria and a limit. When records exceeds thatlimit
then we prompt user that it may take sometime, do you want to proceed? If
he clicks yes then we retrieve those records. This results in lot ofmemory
consumtion.
I was thinking if there is some way that from database I can retrieve some
block of records at a time rather the all records of a query. I wander how
internet search sites work, where thousnds of sites/pages match criteriaand
client can move back & front on any page.
Regards,
Parvez
"Slava Imeshev" <[email protected]> wrote in message
news:[email protected]...
Hi chauhan,
You may want to narrow search criteria along with processing a
limited number of resulting records. I.e. if the size of the result
is bigger than a limit, you stop fetching results and notify the client
that search criteria should be narrowed.
HTH.
Regards,
Slava Imeshev
"chauhan" <[email protected]> wrote in message
news:[email protected]...
Hi all,
At the moment we have some java classes (not ejb - cmp/bmp) for
search
in
our ejb application.
Now we have a problem i.e. records have grown too high( millions ) and
sometimes query results in retrieval of millions of records. It
results
in
too much memory consumtion in our ejb application. What is the best
way
to
address this issue.
Any help will be highly appreciated.
Thanks & regards,
Parvez

Stepping through a query result set, replacing one string with another.

I want to write a function that replaces the occurance of a string with another different string. I need it to be a CF fuction that is callable from another CF function. I want to "hand" this function an SQL statement (a string) like this: (Please note, don't bother commenting that "there are eaiser ways to write this SQL..., I've made this simple example to get to the point where I need help. I have to use a "sub_optimal" SQL syntax just to demonstrate the situation)
Here is the string I want to pass to the function:
SELECT
[VERYLONGTABLENAME].FIRST_NAME,
[VERYLONGTABLENAME].LAST_NAME,
[VERYLONGTABLENAME].ADDRESSS
FROM
LONGTABLENAME [VERYLONGTABLENAME]
Here is the contents of the ABRV table:
TBL_NM, ABRV 
VERYLONGTABLENAME, VLTN
SOMEWHATLONGTALBENAME, SLTN
MYTABLENAME, MTN
ATABLENAME, ATN
The function will return the original string, but with the abreviations in place of the long table names, example:
SELECT
VLTN.FIRST_NAME,
VLTN.LAST_NAME,
VLTN.ADDRESSS
FROM
LONGTABLENAME VLTN
Notice that only the table names surrounded by brackets and that match a value in the ABRV table have been replaced. The LONGTABLENAME immediately following the FROM is left as is.
Now, here is my dum amatuer attempt at writing said function: Please look at the comment lines for where I need help.
 <cffunction name="AbrvTblNms" output="false" access="remote" returntype="string" >
 <cfargument name="txt" type="string" required="true" />
 <cfset var qAbrvs=""> 
 <cfset var output_str="#txt#"> 
 <cfquery name="qAbrvs" datasource="cfBAA_odbc" result="rsltAbrvs">
 SELECT TBL_NM, ABRV FROM BAA_TBL_ABRV ORDER BY 1
 </cfquery>
 
 <cfloop index="idx_str" list="#qAbrvs#"> 
 <cfset output_str = Replace(output_str, "#idx_str#", ) 
 </cfloop> 
 
 <cfreturn output_txt>
 </cffunction>
I'm mainly struggling with syntax here. I know what I want to happen, I know how to make it happen in another programming language, just not CF9. Thanks for any help you can provide.

RedOctober57 wrote:...
Thanks for any help you can provide.
One:
<cfset var output_str="#txt#"> 
No you do not need to create a local variable that is a copy of the arguments variable as the arguments scope is already local to the function, but you do not properly reference the arguments scope, so you leave yourself open to using a 'txt' variable in another scope. Thus the better practice would be to reference "arguments.txt" where you need to.
Two:
I know what I want to happen, I know how to make it happen in another programming language, just not CF9.
Then a better start would be to descirbe what you want to happen and give a simple example in the other programming language. Most of us are muti-lingual and can parse out clear and clean code in just about any syntax.
Three:
<cfloop index="idx_str" list="#qAbrvs#"> 
I think you want to be looping over your "qAbrvs" record set returned by your earlier query, maybe.
<cfloop query="qAbrvs">
Four:
<cfset output_str = Replace(output_str, "#idx_str#", ) 
Continuing on that assumption I would guess you want to replace each instance of the long string with the short string form that record set.
<cfset output_str = Replace(output_str,qAbrs.TBLNM,qAbrs.ABRV,"ALL")>
Five:
</cfloop> 
If this is true, then you are looping over the record set of tablenames and abreviations that you want to replace in the string.

SAP Infoset Query Reporting Set Restriction by Org. Structure

Dear Experts,
I am giving some new users a demo on using Infoset Query on an IDES server.
I am using the user group Personnel Administration (PA) and the HRDATA infoset.
As per my understanding, I should be able to restrict the reporting set according to organizational structure as the infoset is based on logical database PNP. However I am only seeing "No. of hits" in the restrict by drop-down (as can also be seen in the screenshot).
What am I missing to be able to see the restrict by option of "Persons along organizational structure"?
All assistance in this regard is really appreciated.
Regards,
Talha

Dear Azury,
Thankyou for your response.
Your solution is perfectly sound for fulfilling the purpose.
However, because I am conducting a demo, I thought a reporting set restriction on the main screen would be more appealing, than an additional selection screen.
In a demo screenshot I have seen that the restrict by option "Persons along organizational structure", is listed right under "No. of hits" like in my screen shot. Can you shed some light on that. I am attaching the demo screenshot I am talking about for reference as well
Thanks,
Talha

A filter value for Query is set with some value automatically

Hello SAP sourcing Guru!
I created a query which has several filters.
Some of Filter's type is VLV.
When I preview the query somehow the filter values are already set with some value even though I did not set the default value.
For example, filter name is Region and there are four regions: Asia, NA, Europe, and SA.
I want to select one of them from drop-down menu. But Asia was already selected when I clicked the preview button for the query. I want to see "Please Select" instead of Asia from drop-down menu. I did not select "Prefill value from cache" for the filter. I made the filter Optional only. I did not set Default Value either for the filter.
Any clues?
Thank you for your response in advance.

Hi,
In the Default value field of the filter prompts, you need to mention the Class Reference ID of the corresponding field. E.g., if you have Contract document phase as a filter, then in that if you want to display a blank or none value, then you should use null:2016.
Similarly for vlv type, the system has a value 616. Hence if you want to display a None value insteead of Asia, use the following in the Default value field:
0:616:null.
The way to find the class reference ID is to goto the RG > Class Reference > Look for the field that you are attempting to default on.
Hope this helps,
Vikram

Jdbc driver creates new thread for each statement with a query timeout set

I am profiling a web application that is using the Microsoft JDBC driver, version 1.1 to connect to a sql server 2005 database. Each java.sql.Statement that is created, within the application, gets a query timeout value set on it ( statement.setQueryTimeout(...) ).
I have discovered that the JDBC driver creates a new thread to monitor each Statement and the query timeout value. When the application is under load these threads are getting created faster then they are being destroyed and I am concerned that this will cause a performance problem in production.
One option I have is to remove the query timeout value and the monitor threads will not be created, another is to change JDBC drivers.
I'm curious is there any way to control this behavior so that these threads are not created or are managed more efficiently. Is there a workaround that anyone is aware of? Is this considered a bug?
I have found a similar bug here for the 2000 driver:
http://support.microsoft.com/default.aspx/kb/894552
Cheers

Hi,
Thank you for using the Microsoft SQL Server JDBC driver. You are correct that a new thread is started to monitor the query timeout when a statement is executed. This is a potential performance issue that we may look at addressing in the upcoming v1.2 release. The current behavior is not configurable. The only workaround with the v1.1 driver is to limit your use of query timeouts to only those statements which you reasonably might expect to actually time out.
We do take customer feedback very seriously, so if anyone else is concerned about this particular issue, please chime in and we will be able to give it appropriate weight.
--David Olix [MSFT]

Query small set of record in a big table.

Hi,
in 11.2.0.2 i've a table with about 2milions of record.
I use a query that like:
select *
FROM DOC
WHERE INDENTIF = 1001 AND TRASF = 0;
to identify new record in the table (TRASF=0).
INDENTIF column contains 5 distinct key and TRASF can be 0,1,2
SELECT COUNT (*), INDENTIF , TRASF
FROM DOC
BY INDENTIF, TRASF
COUNT     IDENTIF     TRASF
9           1004          2
1359        1005          1
1           1001          2
306859      1004          1
767090      1002         1
2           1002         2
782981      1001         1
There is an index on INDENTIF , TRASF but oracle uses full scan.
Stats are available.
Every time i check for new record it perform a full scan also
if there aren't new record.
Is there a method to use an index without use hint?
Thank you

MartinPreiss ha scritto:
seeing the results from dba_tab_cols_statistics I think it could be a problem with TRASF and the sample_size: there are two known values (I assume 1 and 2) but only one bucket. For a value not included into the histogram the calculation of selectivity may bring very high results since 10.2.0.4: http://jonathanlewis.wordpress.com/2009/04/23/histogram-change/: "If the value you supply does not appear in the histogram, but is inside the low/high range of the histogram then the cardinality will be half the cardinality of the least frequently occurring value that is in the histogram." For a value outside the known range the result will be smaller, but may still be much too high. Perhaps you can give as the plans for:
select *
FROM DOC
WHERE TRASF = 0;
select *
FROM DOC
WHERE TRASF = 1;
select *
FROM DOC
WHERE TRASF = 2;
SQL> set autotrace traceonly explain
SQL> select *
FROM DOC
WHERE TRANSF = 0; 2    3
Execution Plan
Plan hash value: 3984526059
| Id | Operation         | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |      |   929K|    18M| 2137   (2)| 00:00:26 |
|* 1 | TABLE ACCESS FULL| DOC |   929K|    18M| 2137   (2)| 00:00:26 |
Predicate Information (identified by operation id):
   1 - filter("TRANSF"=0)
SQL> select *
FROM DOC
WHERE TRANSF = 1; 2    3
Execution Plan
Plan hash value: 3984526059
| Id | Operation         | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |      | 1858K|    37M| 2142   (2)| 00:00:26 |
|* 1 | TABLE ACCESS FULL| DOC | 1858K|    37M| 2142   (2)| 00:00:26 |
Predicate Information (identified by operation id):
   1 - filter("TRANSF"=1)
SQL> select *
FROM DOC
WHERE TRANSF = 2; 2    3
Execution Plan
Plan hash value: 3984526059
| Id | Operation         | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |      |   929K|    18M| 2137   (2)| 00:00:26 |
|* 1 | TABLE ACCESS FULL| DOC |   929K|    18M| 2137   (2)| 00:00:26 |
Predicate Information (identified by operation id):
   1 - filter("TRANSF"=2)

Query on set

Similar Messages

Maybe you are looking for