Query SQL Statement & Update SQL Statement

Hi!
I configure the JDBC adapter sender (XI) to take data from MSSQL database.
I have to run select like this:
SELECT
tblMilestone.Site,
tblMilestone.Revision,
tblMilestone.MilestoneNameID,
tblMilestone.ApprovedDate,
tblMilestoneName.MilestoneName
FROM
tblMilestoneName
INNER JOIN tblMilestone ON tblMilestoneName.MilestoneNameID = tblMilestone.MilestoneNameID
WHERE tblMilestone.StatusCode = 1;
My question is what "Update SQL Statement" I should use in communication channel definition? I only need to update tblMilestone or this two tables?
Maybe you give me some example.

Check this from SAP help...
Update SQL Statement
You have the following options:
● Enter a valid SQL statement that is to be applied to the database once the data (determined from the Query SQL Statement) has been successfully sent to the Integration Server/PCK.
It must be an INSERT, UPDATE, or DELETE statement.
● In place of the SQL statement, you can also enter <TEST>. Once the data determined from Query SQL Statement has been successfully sent, the data in the database remains unaltered.
This is recommended if the data has not only been read, but also changed by a stored procedure entered under Query SQL Statement.

Similar Messages

Xi JDBC Adapter - Query SQL Statement & Update SQL Statement

Hi!
I configure the JDBC adapter sender (XI) to take data from Oracle database.
I set the Query and Update SQL Statement in the Processing parameters of the communication channel in this way:
Query SQL Statement :
SELECT * FROM XI_TABLE WHERE STATUS = 'WAIT' ORDER BY ROW_NUM
Update SQL Statement :
UPDATE XI_TABLE SET STATUS = 'DONE', DATE = SYSDATE WHERE STATUS = 'WAIT'
My question is :
If a new record with the field STATUS = 'WAIT' is added to the table (xi_table) during the time between the execution of the query statement and the start of the update statement, what will happen to that record during the update?
There is a way to avoid the update of that record? or to pass to the update statement only the record selected in the query statement?
Please, may you give me some example?
Thanks,
Francesco

hi,
did you check "Isolation Level for Transaction"
for the sender jdbc adapter?
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Regards,
michal

How to set Query SQL Statement parameter dynamically in Sender JDBCAdpter

Hi All,
I have one scenario in which we are using JDBC Sender Adapter.
Now in this case,we need to set Query SQL Statement with a SELECT statement based on some fields.
This SQL statement is not constant, it would need to be changed.
Means sometimes receiver will want to execute SQL statement with these fields and sometimes they will want to execute it with different fields.
We can create separate channels for each SQL statement but again that is not an optimum solution.
So ,I am looking out for a way to set these parameters dynamically or set SQL statement at Runtime.
Can you all please help me to get this?

Shweta ,
<i>Sometimes receiver will want to execute SQL statement dynamically</i>....
How you will get the query dynamically? Ok Let me assume, consider they are sending the query through file, then its definitely possible. But u need BPM and also not sender JDBC receiver adapter instead, receiver JDBC adapter.
SQL Query File ->BPM>Synchronous send [Fetch data from DB]--->Response -
>...............
Do u think the above design will suit's ur case!!!!
Best regards,
raj.

Query SQL code gets deleted after export to Excel. "Query must have at least one destination field"

Hi all,
I'm getting really frustrated by this Access error. It happens when I export the result of a query through an Access macro to Excel, the first time it runs well but the next time, there is a chance that the query won't run and the error "Query
must have at least one destination field" will be displayed. After that, I try to check the query SQL code and discover the code has vanished. I'm using simple Select query without joins, only "where", "group by" and "order by"
statements.
Thank you in advance for your help,
Jesus
Edit:
One of these queries are like the following (all of them are of this type):
SELECT Field1, field2, field3, field4, field5, Sum(Field6) AS SumOfField6, Sum(Field7) AS SumOfField7
FROM Table1
WHERE Field6 is not null
GROUP BY Field1, field2, field3, field4, field5
Order By Sum(Field6) desc

Hi Peter,
Thank you for your response, I updated the original question with one of the codes.
Thanks,
Jesus

Query SQL with variables Parameters and user defined tables

Hi everyone
I got a problem about Query SQL
[dbo].[@CSOURCE] is a user defined table
select * from [dbo].[@CSOURCE]
you can get the result in following
code    name
T01      newspaper
T02      TV
T03      radio
T04      friends
when I execute the following SQL   Statements ，I get an error
SELECT T0.CardCode , 0.CardName ,T1.Name ,T2.SONumber
FROM OCRD T0    LEFT JOIN [dbo].[@CSOURCE] T1 ON T0.U_CSOURCE = T1.Code
                             LEFT JOIN (SELECT T0.CardCode ,COUNT(T0.DocNum)SONumber
                             FROM ODLN T0 INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
                            WHERE T1.GroupCode =111
                            AND   (T0.DocDate >=[%0] or [%0]='')
                            AND   (T0.DocDate <=[%1] or [%1]='')
                            GROUP BY T0.CardCode) T2 ON T0.CardCode=T2.CardCode
WHERE T0.GroupCode =111
and T0.CardType ='C
Is there anyone can correct it for me
thank you very much
Edited by: Li Mishan on Jul 17, 2008 9:36 AM
Edited by: Li Mishan on Jul 17, 2008 9:40 AM

I am sorry .It is just a mistake of my typewriting.
The following is the whole SQL
dbo.@CSOURCE is a user table.It's content is
code name
T01    newspaper
T02    TV
T03    radio
T04    friends
declare @m int
declare @FromDate DateTime
declare @ToDate DateTime
set @m=(SELECT count(*) FROM ORDR T0 WHERE T0.DocDate >=[%0] and T0.DocDate <=[%1])
set @FromDate=[%0]
set @ToDate=[%1]
/*****************If I do not connect user tavble dbo.@CSOURCE ，I will succed *****************************************************/
SELECT T0.CardCode ,T0.CardName ,T2.SONumber,T1.Name
FROM OCRD T0 LEFT JOIN [dbo].[@CSOURCE] T1 ON T0.U_CSOURCE = T1.Code
                           LEFT JOIN (
                                            SELECT T0.CardCode ,COUNT(T0.DocNum)SONumber                                            FROM ODLN T0 INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
                                            WHERE T1.GroupCode =111
                                            AND (T0.DocDate >=@FromDate or @FromDate='')
                                            AND (T0.DocDate <=@ToDate or @ToDate ='')
GROUP BY T0.CardCode
                                        ) T2 ON T0.CardCode=T2.CardCode
WHERE T0.GroupCode =111
and T0.CardType ='C'
when I excute the SQL, It return a error , whith says the column name '%0' is invalid.
If I delete "set @m=(SELECT count(*) FROM ORDR T0 WHERE T0.DocDate >=[%0] and T0.DocDate <=[%1])"
and rewrite "set @FromDate='2008.05.01' set @ToDate='2008.07.01' "
It Shows the following results
   CardCode     CardName     SONumber     name
1      000070        Deng. Jiahua   1                newspaper
2      000293        LU .Weijuan    1                radio
3      000313         Xie .Jifang       3               TV
Edited by: Li Mishan on Jul 18, 2008 4:42 AM
Edited by: Li Mishan on Jul 18, 2008 4:43 AM
Edited by: Li Mishan on Jul 18, 2008 5:43 AM

Export Query SQL multi-linee in XML format and Import XML in SAP

Good morning
Someone know if is possible after Export Query SQL on OITT and ITT1 with thousands rows in XML with values already change thru the query.
Then import the XML without using loop in SAP with the above code vb.net
oDistinta = DirectCast(m_oCompany.GetBusinessObjectFromXML(xmlFile, 0), SAPbobsCOM.ProductTrees)
                Dim errCode As Integer = 0
                Dim strErrore As String = ""
                Dim iErrore As Integer = 0
                oDistinta.Browser.ReadXml(xmlFile, 0)
                errCode = oDistinta.Update
                m_oCompany.GetLastError(iErrore, strErrore)
                'on error
                If iErrore <> 0 Then
To make easy the program i post with 2 ProductTrees item. The 2 item already exist in OITT e ITT1.
When i update the 1st item is modify but the 2nd not change.
Here is the XML
<?xml version="1.0" encoding="UTF-16"?>
<BOM>
<BO>
    <AdmInfo>
      <Object>66</Object>
      <Version>2</Version>
    </AdmInfo>
    <ProductTrees>
      <row>
        <TreeCode>V9998</TreeCode>
        <TreeType>iProductionTree</TreeType>
        <Quantity>1000.000000</Quantity>
        <U_SHI_MZDA>0</U_SHI_MZDA>
        <U_SHI_PUMA>0</U_SHI_PUMA>
        <U_SHI_PUUO>0</U_SHI_PUUO>
      </row>
    </ProductTrees>
    <ProductTrees_Lines>
      <row>
        <ItemCode>1047</ItemCode>
        <Quantity>5.000000</Quantity>
        <Warehouse>Mc</Warehouse>
        <Price>0.000000</Price>
        <Currency>
        </Currency>
        <IssueMethod>im_Backflush</IssueMethod>
        <Comment>
        </Comment>
        <ParentItem>V9998</ParentItem>
        <PriceList>2</PriceList>
        <DistributionRule>
        </DistributionRule>
        <U_IDE_POS>10</U_IDE_POS>
        <U_IDE_FASE>0</U_IDE_FASE>
        <U_IDE_OPER>10</U_IDE_OPER>
        <U_SHI_UndInv>N</U_SHI_UndInv>
        <U_SHI_Pri1>
        </U_SHI_Pri1>
        <U_SHI_Pri2>
        </U_SHI_Pri2>
        <U_SHI_Pri3>
        </U_SHI_Pri3>
        <U_SHI_Prgm>
        </U_SHI_Prgm>
        <U_SHI_Tim2>0.000000</U_SHI_Tim2>
        <U_SHI_Tim3>0.000000</U_SHI_Tim3>
        <U_SHI_DexNACQ>
        </U_SHI_DexNACQ>
        <U_SHI_BP>
        </U_SHI_BP>
        <U_SHI_PrcKit>0.000000</U_SHI_PrcKit>
        <U_SHI_ItmNACQ>
        </U_SHI_ItmNACQ>
        <U_SHI_LineOk>N</U_SHI_LineOk>
      </row>
    </ProductTrees_Lines>
    <ProductTrees>
      <row>
        <TreeCode>V9999</TreeCode>
        <TreeType>iProductionTree</TreeType>
        <Quantity>1000.000000</Quantity>
        <U_SHI_MZDA>0</U_SHI_MZDA>
        <U_SHI_PUMA>0</U_SHI_PUMA>
        <U_SHI_PUUO>0</U_SHI_PUUO>
      </row>
    </ProductTrees>
    <ProductTrees_Lines>
      <row>
        <ItemCode>1015</ItemCode>
        <Quantity>1000.000000</Quantity>
        <Warehouse>Mc</Warehouse>
        <Price>0.000000</Price>
        <Currency>
        </Currency>
        <IssueMethod>im_Backflush</IssueMethod>
        <Comment>
        </Comment>
        <ParentItem>V9999</ParentItem>
        <PriceList>5</PriceList>
        <DistributionRule>
        </DistributionRule>
        <U_IDE_POS>30</U_IDE_POS>
        <U_IDE_FASE>0</U_IDE_FASE>
        <U_IDE_OPER>30</U_IDE_OPER>
        <U_SHI_UndInv>N</U_SHI_UndInv>
        <U_SHI_Pri1>
        </U_SHI_Pri1>
        <U_SHI_Pri2>
        </U_SHI_Pri2>
        <U_SHI_Pri3>
        </U_SHI_Pri3>
        <U_SHI_Prgm>
        </U_SHI_Prgm>
        <U_SHI_Tim2>0.000000</U_SHI_Tim2>
        <U_SHI_Tim3>0.000000</U_SHI_Tim3>
        <U_SHI_DexNACQ>
        </U_SHI_DexNACQ>
        <U_SHI_BP>
        </U_SHI_BP>
        <U_SHI_PrcKit>0.000000</U_SHI_PrcKit>
        <U_SHI_ItmNACQ>
        </U_SHI_ItmNACQ>
        <U_SHI_LineOk>N</U_SHI_LineOk>
      </row>
    </ProductTrees_Lines>
</BO>
</BOM>
Someone know the reason ?
Thanks in advance.
Regards

Hi Gabriele,
The issue is that the ReadXml method takes an index parameter which is the number of the object that you want to read from the XML data. In your code you are specifying index 0 which is the first product tree in your file so when you call the Update method this is the only record that will be updated. It is not possible to do a mass update using the DI API in this way, you must always load each object separately. You can use the GetXMLelementCount method of the Company object to find out how many product tree objects are in your file and then use the ReadXML method to load each one by incrementing the index parameter in a loop.
Kind Regards,
Owen

Can I use a OID rule for a Query SQL Lov of BIP?

Hi. Can I use OID data (rules) for a query sql lov in BIP? Ex. filters users/store.
Thank you.
R.

Hi,
I didn't look at the example, but if you want to secure your application then you should use container managed security. Read this .
Anyway, you could add this before return "good"; in your login_action()
FacesContext.getCurrentInstance().getExternalContext().getSessionMap().put("username", user);Then, you can access this from anywhere in the application by using #{sessionScope.username}.
Pedja

Query on Stat Cube

Hi,
I am trying to get query list based on last used date.
I ran query on stat cube 0BWTC_...
Also, i got list of queries from the view v_compdir_compic in bw backend.
But the query list i get from stat cube query is less than what i get from View table.
there are aprox 300 less queries.
can u please tell me why the list is different ?
thanks,
KS
Edited by: Keral Smith on Nov 4, 2008 10:04 AM

Hi Abhijit,
We have all BW statistic cubes loaded on november 1st.
which are 0bwtc_c01,.......they are for aggregate, for OLAP, for OLAP navigation etc.
so how come the list of queries are different than V_COMPDIR_COMPIC ?
any clue ?
thanks,
KS

Query SQL database inside XSL

Do you guys know how can I query SQL database select records and input them to XSL file?
Let me know this is urgent.

Is there an efficient way of doing this, rather than
hardcoding all the less than,greater than lines?Sounds like you need to read this:
http://java.sun.com/webservices/docs/1.1/tutorial/doc/index.html

Query SQL and output to text file then loop through list to execute

It seems there's no obvious way to do what I want to below as everyone has their own take on querying SQL server with Powershell!
I need to use PowerShell to connect to ServerA and query a test database and select Name from it. The Name results of that query need to output to C:\names.txt and then I need a ForEach loop to go through that file line by line and execute some text
against each Name from the list.
Any ideas how I can achieve this?
Thanks!

I can't even output SQl to a table at the moment, the text file has a column header and about 50 empty rows in the file.
$dataSource = "DEMO"
$database = "TESTDB"
$connectionString = "Server=$dataSource;uid=$user; pwd=$pwd;Database=$database;Integrated Security=True;"
$query = "SELECT name FROM dbo.names"
$connection = New-Object System.Data.SqlClient.SqlConnection
$connection.ConnectionString = $connectionString
$connection.Open()
$command = $connection.CreateCommand()
$command.CommandText = $query
$result = $command.ExecuteReader()
$table = new-object "System.Data.DataTable"
$table.Load($result)
$format = @{Expression={$_.Id};Label="Name";width=25}
$table | format-table $format | Out-File C:\export\servers.txt
$connection.Close()

How to set query SQL on db throug item value?

Hi
I've two pages:
the first page contain the item textfield value (P1_NAME) and second page contain the query SQL.
Where the query sql instruction insert in the second page rendering?
In the Items, in the buttons, in the computation, in the process?
How display the results of query?
Help Me!!!

On re-reading I think I get it. When you open the second page, which could be anywhere, you'll have to tell me (could be a Branch, could be a linked column in a report, could be triggered from a button). Whervever the code that opens the second page is, you will see a setting labelled "Target is a" and the chosen selection will be "Page in this Appication" Right under that, you will see two other fields labelled "Set These Items" and "With These Values" this will let you set whatever items you wish on the page that you are opening.

Ask for a query SQL

Hi,
The schema's definition is:
A
=======================
UserID
SubTime
ActiveTime
DeactiveTime
ExpireTime
=======================
I need to get records in the following format:
2003-01-01,<userid>,<action type>
The <action type> should be 1 or 2 or 3 or 4 which indicate the time is 'SubTime' or 'ActiveTime' or 'DeactiveTime' or 'ExpireTime'.
For example, there is a record in database:
UserID SubTime ActiveTime DeactiveTime ExpireTime
1 2004-01-01 2004-01-02 2004-01-03 2004-01-04
The search results should be:
2004-01-01, 1, 1
2004-01-02, 1, 2
2004-01-03, 1, 3
2004-01-04, 1, 4
The search result should be order by time.
The size of the table is very big, can anyone suggest a high performance query SQL? Thank you very much in advance!
BR/Shirley

Hi,
select time,userid,action_type from
(select UserID,SubTime,1 action_type from utab
union all
select UserID,ActiveTime ,2 from utab where where activeTime is not null
union all
select UserID,DeactiveTime ,3 from utab where where dectiveTime is not null
union all
select UserID,ExpireTime ,4 from utab where where ExpireTime is not null)
order by 1
Please chek with Perfermance.
Bye
Chitta

I want to query sql server database from oracle

i want to query sql server database from oracle
can anyone help me in this regard

First of all - you are in the wrong forum.
Look either for the Database general or search for Transparant / Heterogenous Gateways.
cu
Andreas

Query Manager Statement

Dear all,
Which database table store the query manager statement??
How can i transfer it from one company Db to another??
Regards,
Kit

Hi Chun,
As far as I know, they are stored in two tables, one for some registration in SBO and one where the actual query is. (one of those tables is OUQR)
However, SAP does not like it when you fool around in the company database. So you'd better use the DI-API.
In the DI-API you find the <b>UserQueries Object</b>. What you can do, is create two company objects (through the DI-Server?) and connect to both companies. Now you can transfer the UserQuery objects between the two databases.
Hope this helps,
Rowdy

UPDATE QUERY can't update table

Hi,
During 1500-2000 concurrent users, DB Transaction locks occur. So that Update query can't update table and we get inconsistent data. How can we avoid this inconsistent data?? Why we get transaction locks??
Eg. In update query it update the status of user with completed; but because of transaction lock update query can't update status of user it remains uncompleted. So we can get wrong status of user(inconsistent data). Why UPDATE query update the status
of user???
update table set status='completed', date=@p2,score=@p3 where id=@p1

You are not getting inconsistent data, you are getting the data according to the isolation level you are running under. The isolation level determines the locking model and therefore determines any bad dependencies you may experience. Reducing the bad dependencies
through higher isolation level will lower concurrency. *This* is the core concept of Transactional Processing theory.
Furthermore there is not really such a thing as a DB Transaction lock - at least not in the way you mean. SQL server does use DB locks (such as Shared transaction workspace and Exclusive transaction workspace) but the highest level of lock escalation is
the object level (heap or btree) so those are the things you are really interested in. In the ideal would you want all Exclusive, Shared and U locks to be taken at the RID (heaps) or Key (cluster tables) level - and only have few of them per query.
In conclusion think carefully about your query and how it is implimented under the covers by the database engine.
Regards,
Mark Broadbent.
Microsoft Certified Master
Contact me through twitter |
blog | sqlcloud
Please click "Propose as answer" if a post solves your problem
or/and vote the post up if it's been helpful.

Query SQL Statement & Update SQL Statement

Similar Messages

Maybe you are looking for