Query to pull the duration of a success instance

Friends,
I'm using Query Builder (Admin Tools) to pull data regarding success instances. Can someone guide how to pull info about duration of a success instance.
Thanks in Advance,
Bharath

Hi Bharath,
Please try below if this helps you
select SI_NAME, SI_OWNER, SI_AUTHOR, SI_STATUSINFO, SI_SCHEDULEINFO from CI_INFOOBJECTS where SI_SCHEDULEINFO.SI_OUTCOME<2 and="" si_scheduleinfo.si_starttime="">=’2012.03.02′

Similar Messages

SQL query to get the list of approvals

Hi,
Could someone let me know the SQL query to get the list of all the pending approvals for a user in OIM 11g R2.
Thanks

There are a few ways to do this:
- The easiest would be to use a Relationship Query from the CMC. To do this, go to the Universes section on the CMC, right click on the relevant universe, select tools >> Check Relationships.
- Use Query Builder. You will need more than one query to pull the information you need. You could try something like the below (for Webi)
SELECT SI_NAME, SI_WEBI, SI_DATACONNECTION FROM CI_APPOBJECTS
WHERE SI_KIND = 'universe' and SI_NAME = 'Universe Name'
This will give you a list of Webi Reports by SI_ID.
You'll need another query to list Webi report names:
SELECT SI_NAME FROM CI_INFOOBJECTS WHERE SI_ID IN (SI_ID from query above)
- This is trivial via Auditing / the Activity universe. This of course will only return reports that have already run.
Best.
Srinivas

SQL Query To Select The 5th Element

In the report I am currently working on, I am using an Add Command custom SQL query to pull the data that I need. The structure is a Call and a list of associated Activities. In this particular scenario, there are 8 activity notes for a type of call and I want to return the 5th one. The activity notes are a specific sequence of captured actions and I need the note from the 5th step in the sequence.
This is what I have come up with:
SELECT CALL.call_id,
     (select top 1 from (select top 5 CONVERT(char(8000),ACTIVITY.activity_note) from ACTIVITY
      where CALL.call_id = ACTIVITY.call_id
      order by ACTIVITY.creat_date desc))
     as activity_tx
FROM CALL
The intent of the Top 5 was to get the first 5 activity notes, of which the 5th note would be the last, then reverse sort them so I could take the Top 1 (which would be the 5th of 8). But I am getting a vague syntax error between "from" and "order by". Any suggestions would be appreciated.
Thanks!
Fuskie
Who thought he had a solution but is flummoxed he can't bring it home...

Hello,
Let me explain that Crystal assumes the user knows how to write SQL. We only report on the data provided by the SQL you write.
I did a quick search using Microsofts new search engine - www.bing.com and it returned this as well as lots more:
http://forums.devshed.com/php-development-5/how-to-access-a-certain-element-in-the-results-of-606217.html
Try searching in MSSQL's site also for more info on how to get the results you are looking for.
Thank you
Don

Query to get the List of Reports on a Universe

Hi All,
I want to write a query to get all the Web I and Crystal Reports that access a particular universe.
Can anyone suggest me where to start.
This is in BO 3.1 against Oracle databse.

There are a few ways to do this:
- The easiest would be to use a Relationship Query from the CMC. To do this, go to the Universes section on the CMC, right click on the relevant universe, select tools >> Check Relationships.
- Use Query Builder. You will need more than one query to pull the information you need. You could try something like the below (for Webi)
SELECT SI_NAME, SI_WEBI, SI_DATACONNECTION FROM CI_APPOBJECTS
WHERE SI_KIND = 'universe' and SI_NAME = 'Universe Name'
This will give you a list of Webi Reports by SI_ID.
You'll need another query to list Webi report names:
SELECT SI_NAME FROM CI_INFOOBJECTS WHERE SI_ID IN (SI_ID from query above)
- This is trivial via Auditing / the Activity universe. This of course will only return reports that have already run.
Best.
Srinivas

Query to pull duplicates in last 15 days

I have a table with Account and Trans_date columns. I am trying to write a query to pull the accounts that are present today and also present in the last 15 days.
[SQL]
select distinct a.*
from
    select
            SFD.ACCOUNT,
            SFD.TRANS_DATE
    FROM CIRC_RPT.VW_SUBS_FINANCIAL_DRW SFD
    WHERE SFD.trans_date between trunc(:Enter_date) -15 and trunc(:Enter_date)
    ) a
    join
    select
            SFD.ACCOUNT,
            SFD.TRANS_DATE
            FROM CIRC_RPT.VW_SUBS_FINANCIAL_DRW SFD
    WHERE SFD.trans_date = trunc(:Enter_date)
    )b on a.account =b.account
    order by a.account
[\SQL]
This query is pulling the duplicates but it is also pulling accounts that are only present on :Enter_date(not present in the past 15 days).
Please advice on the logic. Thanks in advance for your help.

Hi,
I think you want something like this:
SELECT *
FROM    circ_rpt.vw_subs_financial_drw p15
WHERE   trans_date >= TRUNC (SYSDATE) - 15
AND     trans_date < TRUNC (SYSDATE)
AND     EXISTS (
                   SELECT 1
                   FROM    circ_rpt.vw_subs_financial_drw
                   WHERE   account = p15.account
                   AND    trans_date = TRUNC (SYSDATE)
You can use :Enter_date instead of SYSDATE, but make sure it really is a DATE. If :enter_date is a string, then remember to use TO_DATE.
If you do a join, you'll get duplicate rows if there happen to be 2 (or more) rows for the same account dated today.
The main problem with what you posted was that the way you checked for the past 15 days:
WHERE SFD.trans_date between trunc(:Enter_date) -15 and trunc(:Enter_date)
Any row that met the condition for occurring on :enter_date
WHERE SFD.trans_date = trunc(:Enter_date)
would also meet the other condition, since BETWEEN includes both end-points.

In oracle rac, If user query a select query and in processing data is fetched but in the duration of fetching the particular node is evicted then how failover to another node internally?

In oracle rac, If user query a select query and in processing data is fetched but in the duration of fetching the particular node is evicted then how failover to another node internally?

The query is re-issued as a flashback query and the client process can continue to fetch from the cursor. This is described in the Net Services Administrators Guide, the section on Transparent Application Failover.

Query to pull all the receipts applied....

My requirement is to pull the list of all the receipts applied with the applied amount of that receipt, the unapplied amount and the on account amount on that receipt. The Applied plus Unapplied plus On-Account amounts should equal the Receipt Amount.
Please let me know if any one has a query to pull these items.
Any help would be greatly appreciated!!!
Thanks in Advance!!!

Pls find the script to find the Hold invoies for those suppliers
select aps.VENDOR_NAME,aia.INVOICE_NUM,aia.INVOICE_AMOUNT
from ap_suppliers aps,ap_invoices_all aia,ap_holds_all aha
where aia.VENDOR_ID = aps.VENDOR_ID
and aia.INVOICE_ID = aha.INVOICE_ID
and aha.RELEASE_REASON is null
Thanks
Hari

Query to mimic the items tab of the Sales Analysis report.

Hi there,
I'm currently looking to create a query that mimics the behaviour of the Sales Analysis report in B1. The items tab of the Sales Analysis report provides all the data I require - the only issue is that I would like to merge this data with some other data regarding current on hand stock quantities etc. and therefore I would like to be able to pull out the query behind the Sales Analysis report.
I'm assuming this cannot be done and therefore I'm attempting to build a query to replicate the results. The query needs to show Item No, Item Description, Quantity Sold, Sales Amt (in system currency), Gross Profit and Gross Profit % for items within a given period.
If this can be done relatively easily, can the query then be modified to show all items (including items that haven't sold in the date range) merely with '0' for Quantity Sold, Sales Amt etc. if the item hasn't been sold in the period, and the appropriate figures if each of these columns if the item has sold. I assume some kind of CASE statement can be used to generate this.
So the query needs to show Item No, Item Description, Current quantity in stock, Quantity Sold, Sales Amt (in system currency), Gross Profit and Gross Profit % for all items within a given date range.
I hope you can assist me with this problem.
Thanks
Grant.

Hi,
Thanks Gordon that was exactly what I needed.
I've been trying to add some additional columns to the query but I'm experiencing some errors and I can't quite tell why.
Basically, here's the code from another working query I have which I wish to merge into the query you've suggested above:
SELECT T0.[ItemCode],
T0.[ItemName],
T3.[ItmsGrpNam],
T4.[Name] AS [Sub-Category],
T5.[Name] AS [Sub-Sub-Category],
T0.[CardCode] AS [Pref Supplier],
T6.[FirmName] AS [Brand],
T0.[U_Range],
T0.[OnHand],
CASE WHEN T0.[StockValue] = 0 THEN 0 ELSE T0.[StockValue] END AS [StockValue],
T1.[Price] AS [PBK GBP Price],
CASE WHEN T0.[OnHand] = 0 THEN T0.[LastPurPrc] ELSE T0.[StockValue]/T0.[OnHand] END AS [Ave Cost],
CASE WHEN T0.[OnHand] = 0 THEN T1.[Price]-T0.[LastPurPrc] ELSE CASE WHEN T0.[OnHand] > 0 THEN T1.[Price]-T0.[StockValue]/T0.[OnHand] END END AS [Margin],
CASE WHEN T0.[OnHand] = 0 AND T0.[LastPurPrc] = 0 THEN 0 ELSE CASE WHEN T0.[OnHand] > 0 AND (T0.[StockValue]/T0.[OnHand]) = 0 THEN 0 ELSE CASE WHEN T0.[OnHand] = 0 THEN (T1.[Price]-T0.[LastPurPrc])/T1.[Price]*100 ELSE CASE WHEN T0.[OnHand] > 0 THEN (T1.[Price]-T0.[StockValue]/T0.[OnHand])/T1.[Price]*100 END END END END AS [Margin %],
T0.[LastPurPrc]
FROM [dbo].[OITM] T0 INNER JOIN [dbo].[ITM1] T1 ON T0.ItemCode = T1.ItemCode INNER JOIN [dbo].[OITB] T3 ON T0.ItmsGrpCod = T3.ItmsGrpCod LEFT OUTER JOIN [dbo].[@U_SUBCATEGORY] T4 ON T0.U_Subcategory = T4.Code LEFT OUTER JOIN [dbo].[@U_SUBSUBCATEGORY] T5 ON T0.U_SubSubCategory = T5.Code INNER JOIN OMRC T6 ON T0.FirmCode = T6.FirmCode
WHERE T0.[OnHand] >= 0 and T0.U_Range not in ('E','X')
ORDER BY T0.[ItemCode]
Essentially I just wish to add the fields which are specified in the query above, but not in the query you've already suggested:
SELECT T0.ItemCode,
Max(T0.ItemName),
Max(IsNull(T0.OnHand,0)) 'In Stock',
SUM(IsNull(T1.Quantity,0)) 'Quantity',
Sum(IsNull(T1.LineTotal,0)) 'Sales Amt',
SUM(IsNull(T1.GrssProfit,0)) 'Gross Profit',
Case WHEN Sum(Isnull(T1.LineTotal,0)) = 0 THEN 0 ELSE
SUM(IsNUll(T1.GrssProfit,0))/Sum(Isnull(T1.LineTotal,0)) * 100 END 'Gross Profit %'
FROM dbo.OITM T0
LEFT JOIN dbo.INV1 T1 ON T1.ItemCode=T0.ItemCode
LEFT JOIN dbo.OINV T2 ON T2.DocEntry=T1.DocEntry AND T2.DocDate Between [%0] AND [%1]
GROUP BY T0.ItemCode
I was hoping it would be fairly straight forward but so far I've had limited success.
What am I missing here?
Thanks in advance!

How can i get the SSO to work successfully?

How can i get the SSO to work successfully? I followed the note for configuring infoview with ad sso using kerveros & .net.
Adding the AD group into the win ad authentication configuration page creates the user group but the members of the group aren't being pulled in when I go to the group and select / query the users tab

Bart,
By default the setting for update options on the Windows AD tab of authentication does not actually create the aliases until the user attempts to login the first time. We set it this way to prevent a huge group of alias's being created when the administrator sets up Windows AD and also so that only user aliases for users actually using the system get created. You can change this behaviour though if you like. Simply change the radio button option to 'New Aliases will be added and new users will be created' this will create the accounts for you when you hit the update button. If you have a large group your adding I would wait until and afterhours time when you have less activity as this will impact CMS performance while it creates all the accounts.

Query to pull out Vendor details with AP invoice

Hi all
I have made the following query to pull out the following data
House Bank Account, Customer/Vendor Name,Payment Method code,Default Account,Default Branch,Default bank Internal id,
Document NUmber,Customer/Vendor Ref No,Row Total,Item/Service description,Branch,Street
SELECT T0.[HousBnkAct], T1.[CardName], T0.[PymCode], T0.[DflAccount],T0.[DflBranch], T0.[BankCtlKey], T1.[DocNum],T1.[NumAtCard], T2.[LineTotal], T2.[Dscription], T3.[Branch], T3.[Street] FROM OCRD T0 INNER JOIN OPCH T1 ON T0.CardCode = T1.CardCode INNER JOIN PCH1 T2 ON T1.DocEntry = T2.DocEntry INNER JOIN DSC1 T3 ON T0.HousActKey = T3.AbsEntry WHERE T1.[DocDate] >=[%0] AND T1.[DocDate] <=[%1] AND T1.[DocStatus] = 'o' AND T0.[PymCode] = 'EFT'
But i have observed that i am not getting all the customers in this query where the invoice is open, it displays only few records.
Regards
Farheen

Hi Farheen......
Please try this........
SELECT T0.HousBnkAct, T1.CardName, T0.PymCode, T0.DflAccount,
T0.DflBranch, T0.BankCtlKey, T1.DocNum,T1.NumAtCard, T2.LineTotal, T2.Dscription,
T3.Branch, T3.Street FROM OCRD T0 LEFT JOIN OPCH T1 ON T0.CardCode = T1.CardCode
LEFT JOIN PCH1 T2 ON T1.DocEntry = T2.DocEntry LEFT JOIN DSC1 T3 ON
T0.HousActKey = T3.AbsEntry WHERE T1.DocDate >='[%0]' AND T1.DocDate <='[%1]' AND T1.DocStatus = 'o' AND T0.PymCode = 'EFT'
Regards,
Rahul

Folder mapping with Unix XI box / XI is not pulling the file from folder

We have installed XI on Unix box. We have developed a test scenario using file adapter and tested the mapping program. it's executing successfully. Problem is after completion of configuration XI server is not pulling the file from the assigned folder. I think we need to map that network driver with the XI server. Hope my assumption is correct if not correct me and please help me to resolve the problem.
any help appreciated
Regards,
Venkat Bomma.

Well, I had the same problem once but I don't remember exatcly the solution...
I am pretty sure it's a post-installation activity (search in SDN or marketplace for the relevant Guide).
You can also find some useful information in this doc right here <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/08438c77-0501-0010-50a0-e39">How-To Monitor and Analyze Errors in the SAP J2EE Adapter Engine</a> starting from chapter 3.
Let me know if this helps. In the meantime I will dig in my memory...
Cheers,
Alex

Is there a way to change the duration of a group of selected clips all at once?

Hi all,
I'm working with good old Premiere 6 on Windows 7.
Is there a way to change the duration of a group of selected clips all at once? If I have a large group of clips in my timeline that are all the same duration, once I've selected them all in a group, can I somehow change the frame number duration of all the clips at the same time?
I've found other things that can be done to a group of clips at the same time, but I can't find a way to change the duration of a group of selected clips.
Thanks,
digi

Thanks Jim and Bill,
In my efforts to work around the problems with the distortion and horizontal interlace lines that come when using the Motion Settings, I'm doing stop frame animation with hundreds and hundreds of layers in PSDs in multiple files placed in hundreds of one, four and six frame sections in Premiere, so if I find that I need to change the number of frames per clip in hundreds of consecutive clips (not actual duration of speed changes), then I need to pull out the right side of hundreds of frames after first moving them apart enough to allow for changing them if I'm making them longer.
These animations are different from the rotating reel animations in that they are for laterally moving subjects that are long streams of moving graphics and photos.
I read about "clip nesting", but I think that only applies to clips or groups of clips that are the same, whereas my clips are each from different imported layers times 125 or so, consecutively placed one after another to create the laterally moving stop frame animation.
Now I've tried johnbmx4christ's alternate method of creating rotations that was just posted on the other thread about the rotation distortion, but that method results in the same oblong distortion and messed up looking horizontal interlace lines.
What a can of worms.
Thanks,
digi

How to pull the text for InfoObject in APD

Hi All,
I have a requirement where in I have to combine the data from 2 InfoObjects using an APD based on some conditions.
I need to bring in the text for these infoObjects and there attributes too.
The proposed solution from my side for pulling the text is
u2022 Getting the text from the text table u2013 this is working fine but the performance is not good.
u2022 Making a query above the object and taking the output as the APD input. Now, in the query , I have selected the display option u2018key and textu2019 but when I am using this query as input for the APD, I am not getting the text.
Please let me know how to get the text using the query output and/ or are there any other approach to get the text of an infoObject.
Thanks & Regards
Abhi

Hi,
It is possible to read the text tables of the infobject, for eg In material you can use table /BI0/TMATERIAL
You have to select a Datasource as the 'Database table and use /BI0/TMATERIAL as one of the underlying tables and then choose another datasource with /BI0/MMATERIAL as the underlying table.
Now that you have all the data that is needed you can use the join to connect the above two datasources .Select the join condition (material in this case) and the fields that you would like to be have to the next level from the individual tables that you have selected earlier.
I guess if you work in this way you might get the results that you are looking forward quite easily without writting code.
Let me know if it helps.
Regards
Ankit

Query relating to the creation of Managed Service Accounts

Hi Folks
I am studying for my 70-411 exam and have a query relating to the creation of Managed Service Accounts.
I have successfully created an MSA account named 'MSATest' on a DC using:
new-adserviceaccount -name msatest –dnshostname home-dc-01 -passthru
and
add-AdcomputerServiceAccount -identity home-ap-01 -serviceaccount msatest -passthru
However the guide that I am using now says that I now need to run: Install-ADServiceAccount on the host computer in the domain to install the MSA in order to make available it available for use by services.
So on my member server (home-ap-01) I have installed the Active Directory Module for powershell and ran:
PS C:\Users\administrator.PCECORP> Install-ADServiceAccount -Identity msatest
Install-ADServiceAccount : Cannot install service account. Error Message: 'An
unspecified error has occurred'.
At line:1 char:1
+ Install-ADServiceAccount -Identity msatest
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : WriteError: (msatest:String) [Install-ADServiceA
   ccount], ADException
    + FullyQualifiedErrorId : InstallADServiceAccount:PerformOperation:Install
   ServiceAcccountFailure,Microsoft.ActiveDirectory.Management.Commands.Insta
llADServiceAccount
PS C:\Users\administrator.PCECORP>
However this errors, Have I misunderstood the purpose of the Install-ADServiceAccount ? or am I doing something wrong?
Thanks in advance for you help.

Try using -RestrictToSingleComputer parameter when creating service account with New-ADServiceAccount.
Gleb.
Hi Gleb
Thank you for your help, it is appreciated. That did the trick.
All the best.

Pulling the condition records - help in the ABAP code -urgent!!!!!

hi folks,
I need some urgent help here..
I have discussed this portion before in the forum but there are some changes and I need some help here.
The code goes like this....
select knumv kschl kbetr kwert
from konv into table cdata
     for all entries in bodyitab21
    where konv~knumv = bodyitab21-knumv
                 and konv~kwert > 0.
I am successfully pulling the data into cdata here..
I need to check for various condition types that are around 100. I need to split them into two types because some condition types containe just pricing values while some others have values in % (but the value not stored in that format) To do the extra coding I have use two differetn case statements and that's what i have done here.
<b>My probelm is I will have to check for each condition type, if the 'kwert' field has some value in it pull the data and there is a condition text associcated to it in the table 'T685T' that needs to be pulled into the itab.
This process has to be done for every condition type.</b>Given this scenario how can i do it?
    loop at cdata into wac.
    case wac-kschl.
         when 'ZRAT' OR 'ZAGR' OR 'ZRCR' OR 'Y098' OR 'Y007' OR 'ZREW' OR 'Y106' OR 'ZTSR' OR 'Y127' OR 'Y125' OR 'Y126' OR 'Y124' OR 'Y157' OR 'Y092' OR 'Y085' OR 'Y090' OR 'ZMZD' OR 'Y215' OR 'Y214' OR 'Y111' OR 'ZC$D' OR 'ZAUD' OR 'ZTHX' OR 'ZCOL'
OR 'ZCFE' OR ZSPA' OR 'ZBOX' OR 'ZCOR' OR 'Y130' OR 'ZBOR'
OR 'Y108' OR 'ZFPP' OR 'Y204' OR 'Y200' OR 'Y202' OR 'Y201' OR 'Y203' OR 'Y002' OR 'ZSCR' OR 'Y128' OR 'Y100' OR 'ZABS' OR 'ZSMG' OR 'ZFRE' OR 'ZREC' OR 'ZCOM' OR 'ZPMG' OR 'BEMG' OR 'ZDTI' OR'ZBET'.
<b>***** the first set of these condition types have just values</b>     if wac-kbetr = ' ' AND wac-kwert = ' '.
               continue.
             else.
              p = wac-kbetr.
              i = p.
              c = i.
              MOVE c to w_accitab-zrate.
                 MOVE wac-kbetr to w_accitab-zrate.
              MOVE wac-kwert to w_accitab-zsubtotal.
            endif.
    when 'ZSED' OR 'ZRFQ' OR 'ZIMP' OR 'ZERR'
     OR 'ZECD' 'ZAC1' OR 'ZAC%' OR 'ZAC2' OR 'ZSED' OR 'ZRFQ' OR 'ZIMP' OR 'ZERR' OR 'ZECD' 'ZQUD' OR 'ZEMP' OR 'Y101' OR 'Y012' OR 'ZCHU' OR 'Y054' OR 'Y065' OR 'Y066' OR 'Y067' OR 'Y068' OR 'Y069' OR 'Y096'
OR 'Y103' OR 'Y010' OR 'Y070' OR 'Y071' OR
'Y072' OR 'Y073' OR 'Y074' OR 'Y075' OR 'Y076'
OR 'Y077' OR 'Y078' OR 'Y079' OR 'Y156' OR OR 'Y148'
OR 'Y102' OR 'Y205' OR 'Y206' OR 'Y207' OR 'Y208' OR
'Y209' OR 'Y213' OR 'Y210' OR 'Y211' OR 'Y212' OR 'Z%DS'
OR 'Z%DO' OR 'Y113' OR 'Y151' OR 'Y152' OR 'Y153' OR
'Y154' OR 'Y155' OR 'Y147' OR'Z%PB' OR 'Y142' OR 'Y131'
OR 'Y141' OR 'Y149' OR 'ZDEO' OR 'Z%DR' OR 'Y115' OR
'Y116' OR 'Y095' OR 'Y084' OR 'ZSA$' OR 'ZSA%' OR
'ZPA$' OR 'ZPA%'.
the second set of these condition types have just values that has to be converted into %.
           if wac-kbetr = ' ' AND wac-kwert = ' '.
            clear w_accitab-zrate.
            continue.
          else.
            p = wac-kbetr.
            p = p / 10.
            if p < 1.
              rate+0(1) = '-'.
            endif.
            if i = 0.
              clear w_accitab-zrate.
             else.
            i = p.
            c = i.
            shift c right deleting trailing '-'.
            concatenate rate c '%' into rate.
            condense rate no-gaps.
                 MOVE wac-kbetr to w_accitab-zrate.
            MOVE rate to w_accitab-zrate.
            clear rate.
            MOVE wac-kwert to w_accitab-zsubtotal.
          endif.
        endif.
Thanks alot in advance.
Santhosh

Maybe this will help you, otherwise I'm missing something.
[code]
data: begin of wac,
      kschl type t685t-kschl,
      vtext type t685t-vtext,
      end of wac.
case wac-kschl.
when 'ZRAT' or 'ZAGR' or 'ZRCR' or 'Y098' or 'Y007' or 'ZREW' or 'Y106'
or 'ZTSR' or 'Y127' or 'Y125' or 'Y126' or 'Y124' or 'Y157' or 'Y092' or
'Y085' or 'Y090' or 'ZMZD' or 'Y215' or 'Y214' or 'Y111' or 'ZC$D' or
     'ZAUD' or 'ZTHX' or 'ZCOL' or 'ZCFE' or 'ZSPA' or 'ZBOX' or 'ZCOR'
or 'Y130' or 'ZBOR' or 'Y108' or 'ZFPP' or 'Y204' or 'Y200' or 'Y202' or
'Y201' or 'Y203' or 'Y002' or 'ZSCR' or 'Y128' or 'Y100' or 'ZABS' or
     'ZSMG' or 'ZFRE' or 'ZREC' or 'ZCOM' or 'ZPMG' or 'BEMG' or 'ZDTI'
        or'ZBET'.
Some code
when 'ZSED' or 'ZRFQ' or 'ZIMP' or 'ZERR'
or 'ZECD' or 'ZAC1' or 'ZAC%' or 'ZAC2' or 'ZSED' or 'ZRFQ' or 'ZIMP' or
'ZERR' or 'ZECD' or 'ZQUD' or 'ZEMP' or 'Y101' or 'Y012' or 'ZCHU' or
'Y054' or 'Y065' or 'Y066' or 'Y067' or 'Y068' or 'Y069' or 'Y096'
or 'Y103' or 'Y010' or 'Y070' or 'Y071' or
'Y072' or 'Y073' or 'Y074' or 'Y075' or 'Y076'
or 'Y077' or 'Y078' or 'Y079' or 'Y156' or 'Y148'
or 'Y102' or 'Y205' or 'Y206' or 'Y207' or 'Y208' or
'Y209' or 'Y213' or 'Y210' or 'Y211' or 'Y212' or 'Z%DS'
or 'Z%DO' or 'Y113' or 'Y151' or 'Y152' or 'Y153' or
'Y154' or 'Y155' or 'Y147' or'Z%PB' or 'Y142' or 'Y131'
or 'Y141' or 'Y149' or 'ZDEO' or 'Z%DR' or 'Y115' or
'Y116' or 'Y095' or 'Y084' or 'ZSA$' or 'ZSA%' or
'ZPA$' or 'ZPA%'.
Some code
endcase.
select single vtext into wac-vtext from t685t
              where spras = sy-langu
                and kschl = wac-kschl.
write:/ wac-kschl, wac-vtext.
[/code]
Regards,
Rich Heilman

Query to pull the duration of a success instance

Similar Messages

Maybe you are looking for