Querying data in a text datatype in informix

I currently use HS to query an informix database from oracle. When I do a select * from... which includes a column that is a 'text' datatype, the query fails with :-
ERROR:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
ORA-02063: preceding line from QA01
The query will return a certain number of rows and then fail. Any ideas/clues would be much appreciated.
Thanks

Do you need the data in the Text column? If not don't select it.
If you do need the Text column can you cast to a more common type like a varchar?

Similar Messages

Query to find all text attachments for items

I am using the query below to try to find all active items for my org that have an attachment of type 33 (something we have defined I believe) and contain specific text. Some of the items appear to meet all criteria (active, right category, etc) but do not show up in my results. Can someone please take a look and see if there is a join missing, an outer join that should be used, or an overall easier way to do this query and get the text information?
SELECT i.segment1 "Item Number",
i.description "Item Description",
u.user_name || ' (' || ppx.first_name || ' ' || ppx.last_name || ')' "Created By",
i.creation_date "Created Date",
to_number(r.revision) "Revision",
to_char(r.effectivity_date, 'MM/DD/YYYY') "Effectivity Date",
nvl(tx.short_text, '<No Drawing Info>') "Drawing Info / Attachment"
FROM apps.mtl_system_items_b i,
apps.mtl_item_revisions_b r,
apps.fnd_user u,
apps.per_people_x ppx,
apps.fnd_attached_documents ad,
apps.fnd_documents d,
apps.fnd_documents_tl t,
apps.fnd_documents_short_text tx
WHERE i.organization_id = 90 AND -- for MBE only
r.organization_id = 90 AND -- for MBE only
ad.pk1_value = 90 AND -- for MBE only
ad.entity_name = 'MTL_SYSTEM_ITEMS' AND
(upper(tx.short_text) LIKE '%DWG%' OR
upper(tx.short_text) LIKE '%SIZE%' OR
upper(tx.short_text) LIKE '%DRAW%') AND
tx.short_text != 'DWG NONE' AND
d.document_id = t.document_id AND
t.source_lang = 'US' AND
t.LANGUAGE = 'E' AND
to_number(ad.pk2_value) = i.inventory_item_id AND
t.document_id = ad.document_id AND
tx.media_id = t.media_id AND
d.category_id = 33 AND
i.inventory_item_status_code = 'Active' AND
i.inventory_item_id = r.inventory_item_id AND
u.employee_id = ppx.person_id AND
u.user_id = i.created_by AND
to_number(r.revision) =
(SELECT MAX(to_number(r2.revision))
FROM apps.mtl_item_revisions_b r2
WHERE r2.inventory_item_id = i.inventory_item_id) AND
r.effectivity_date =
(SELECT MAX(r3.effectivity_date)
FROM mtl_item_revisions_b r3
WHERE r3.inventory_item_id = i.inventory_item_id)
GROUP BY i.segment1,
r.revision,
i.description,
u.user_name,
ppx.first_name,
ppx.last_name,
i.creation_date,
r.effectivity_date,
tx.short_text
ORDER BY i.segment1 ASC;
Thank you!
Message was edited by:
matt.schutz

There is no workbook/worksheet linkage to a business area. So you cannot search for a business area and find all the workbooks "attached" to that business area. The attachment of workbooks is at the folder level. It is actually possible, if you are sharing folders among business areas, to create a workbook with data from 2 or more business areas. I have tested that and it is indeed possible. In Discoverer Administrator you can check on folder dependencies to see what workbooks use the folder. Though in my version of Discoverer, there is a problem with Discoverer Plus, such that the workbook save in Plus is not creating this dependency information like it should. At least I have not found any way to take a business area and determine what workbooks would fall under it. Maybe someone else has found a way.
John Dickey

Problem in reading Text (DataType) field.

Hi
Its j2sdk1.4.2_05, Tomcat 5.0, and MS SQL server 2000.
My clients requirement is to store bulk text data into database.
I created a table with one field of text datatype, I am unable to read the value in the field. If I change the field datatype to varchar, it works. I am reading data using Recordset class Object.
If my problem is not clear, plz ask me to explain.
Somewhere I read that this problem is due to Database drivers.
- Need Your Help.

Problem resolved
http://forum.java.sun.com/thread.jspa?threadID=393559
Mishra

Export Query Data to Excel

Hey guys, I have a cfm page that I am using to query data, and the result set is displayed on the same page when a user clicks submit.
My question is, I would like to create a clickable icon where, after a user runs the query and the data table displays, I want the user to be able to click a little Excel icon that will allow them to download the data in Excel.
So, a user clicks on a little icon somewhere on the page and IE or Firefox or whatever pops up a little dialog box asking them if they want to OPEN or SAVE the file results.xls. How can I do this?
Here is my current code, but where do I implement the cfoutput stuff to export? On the same page?
<cfquery name="qActivity" datasource="khamp" result="resultInfo">
     SELECT KHAMELEON.GL_DETAIL.ACCOUNT, KHAMELEON.GL_ACCOUNT.DES1, KHAMELEON.GL_DETAIL.ENTITY,
    SUM (KHAMELEON.GL_DETAIL.AMOUNT) AS "TotalAmt"
     FROM KHAMELEON.GL_ACCOUNT, KHAMELEON.GL_DETAIL
    WHERE 0=0
    <cfif Form.Entity IS NOT "">
          AND KHAMELEON.GL_DETAIL.ENTITY = '#Form.Entity#'
     </cfif>
    AND KHAMELEON.GL_DETAIL.ACCTG_DATE <= '#Form.asofday#-#Form.asofmonth#-#Form.asofyear#'
    <cfif Form.accountnum IS NOT "">
    AND KHAMELEON.GL_ACCOUNT.ACCOUNT = '#Form.accountnum#'
    </cfif>
    AND KHAMELEON.GL_ACCOUNT.ACCOUNT=KHAMELEON.GL_DETAIL.ACCOUNT
    GROUP BY
KHAMELEON.GL_ACCOUNT.ACCOUNT,
KHAMELEON.GL_DETAIL.ACCOUNT,
KHAMELEON.GL_ACCOUNT.DES1,
KHAMELEON.GL_DETAIL.ENTITY
     HAVING SUM(KHAMELEON.GL_DETAIL.AMOUNT)<>0
     ORDER BY KHAMELEON.GL_ACCOUNT.ACCOUNT ASC
     </cfquery>
<cfif resultInfo.Recordcount eq 0>
    No Records Match the Search Criteria.
    <cfelse>
    <hr/>
    <br/>
    <table border="1" class="displaytable">

        <tr>
           <th>Account</th>
           <th>Description</th>
           <th>Entity</th>
           <th>Book 1</th>
      </tr>

      <cfoutput query="qActivity">
      <tr>
        <td>#qActivity.ACCOUNT#</td>
        <td>#qActivity.DES1#</td>
        <td>#qActivity.ENTITY#</td>
        <td style="text-align:right">#NumberFormat('#qActivity.TotalAmt#', "_(999,999,999.99)")#</td>
      </tr>
      </cfoutput>
I got the following code off of a thread in the forum, but it trys to download the excel file as soon as the query is run (the excel download doesn't work though, it trys to download the actual cfm page instead):
<cfheader name="Content-Disposition"
value="inline; filename=tb.xls">
<cfcontent type="application/vnd.ms-excel">
<table border="2">
<tr>
<td> Account </td><td> Description </td><td> Entity </td><td> Book1 </td>
</tr>
<cfoutput query="qActivity">
<tr>
<td>#qActivity.ACCOUNT#</td><td>#qActivity.DES1#</td><td>#qActivity.ENTITY#</td><td>#NumberFormat('#qActivity.TotalAmt#', "_(999,999,999.99)")#</td>
</tr>
</cfoutput>
</table>
</cfcontent>
Thanks guysq

To actually get the data into excel, google "cold fusion excel poi" and look for Ben Nadel's cfc. Otherwise you might have issues with Office 2007.
For the icon or whatever, make your query a session variable. Then have the icon link to either a self closing popup or a very small iframe that exports the query to an excel file and then uses cfcontent to download it to the user.

How to validate Date value in Text Column

Hi All,
I have entered DATE value in text item field(Char Data Type), Now how can i validate, the entered date is valid or not.
Thanks in advance.

Well, the easiest way would be to make the item of datatype DATE.
Another possibility is to try to convert the given value to a date in the WHEN-VALIDATE-ITEM-trigger, like
DECLARE
dt DATE;
BEGIN
dt:=TO_DATE(:BLOCK.ITEM);
-- if code comes here, the date is valid
EXCEPTION
WHEN OTHERS THEN
    -- seems to be no valid date
    MESSAGE('Error');
    RAISE FORM_TRIGGER_FAILURE;
END;Edited by: Andreas Weiden on 19.12.2010 12:23

Query data source type = procedure or from clause

1)I have a form where a block is based on a from clause. In the source name I entered a simple sql statement.
Isn't the items suppose to show without any other action or
WHAT ELSE DO I NEED TO DO IN ORDER TO SEE THE BLOCK ITEMS EQUIVALENT TO THE COLUMNS IN THE QUERY?
2) I have a form where a block is based on a procedure.
First I created a package in a program unit with the procedures query_procedure, insert_procedure, update_procedure, delete_procedure and lock_procedure.
Then I set the query data source name to the package query_procedure. The columns and arguments were automatically filled by Forms - they are fine as well.
Forms automatically created the block triggers insert-procedure,delete-procedure, update-procedure and lock-procedure.
Everything seems to be fine but when I run the form and execute the query I get frm 40505 - unable to perform query.
What am i doing wrong?
This is the package:
PACKAGE pkgdeptemp IS
type dept_emp is record (
empno number(4),
ename varchar2(10),
job varchar2(9),
hiredate date,
sal number(7,2),
deptno number(2),
dname varchar2(14));
success constant number :=0;
type dept_emp_ref is ref cursor return dept_emp;
type dept_emp_tab is table of dept_emp index by binary_integer;
procedure query_procedure (resultset in out dept_emp_ref, p_empno in number);
procedure lock_procedure (dmlset in out dept_emp_tab);
procedure insert_procedure (dmlset in out dept_emp_tab);
procedure update_procedure (dmlset in out dept_emp_tab);
procedure delete_procedure (dmlset in out dept_emp_tab);
END;
PACKAGE BODY pkgdeptemp IS
function get_success return number is
     begin
          return(success);
     end;
procedure query_procedure (resultset in out dept_emp_ref, p_empno in number) is
begin
     open resultset for
          select e.empno, e.ename, e.job, e.hiredate, e.sal, e.deptno, d.dname
          from emp e, dept d
          where e.deptno = d.deptno
          and e.empno = nvl(p_empno, e.empno);
end query_procedure;
procedure lock_procedure(dmlset in out dept_emp_tab) is
     tempout number(4);
begin
     for i in 1..dmlset.count loop
          select empno
          into tempout
          from emp
          where empno = dmlset(i).empno
          for update;
     end loop;
end lock_procedure;
procedure insert_procedure (dmlset in out dept_emp_tab) is
     cursor c_dept (i binary_integer) is
     select deptno
     from dept
     where deptno = dmlset(i).deptno;
     tempout number(4);
begin
     for i in 1..dmlset.count loop
          open c_dept(i);
          fetch c_dept into tempout;
          if c_dept%notfound then
               insert into dept(deptno,dname)
               values(dmlset(i).deptno, dmlset(i).dname);
          end if;
          close c_dept;
          insert into emp (empno,ename,job,hiredate,sal,deptno)
          values (dmlset(i).empno, dmlset(i).ename, dmlset(i).job, dmlset(i).hiredate, dmlset(i).sal, dmlset(i).deptno);
     end loop;
end insert_procedure;
procedure update_procedure (dmlset in out dept_emp_tab) is
     cursor c_dept (i binary_integer) is
     select deptno
     from dept
     where deptno = dmlset(i).deptno;
     tempout number(4);
begin
     for i in 1..dmlset.count loop
          open c_dept(i);
          fetch c_dept into tempout;
          if c_dept%notfound then
               insert into dept(deptno,dname)
               values(dmlset(i).deptno, dmlset(i).dname);
          else
          update dept
          set deptno=dmlset(i).deptno,
          dname=dmlset(i).dname;
          end if;
          close c_dept;
     update emp
          set empno=dmlset(i).empno,
          ename=dmlset(i).ename,
          job=dmlset(i).job,
          hiredate=dmlset(i).hiredate,
          sal=dmlset(i).sal,
          deptno=dmlset(i).deptno;
     end loop;
end update_procedure;
procedure delete_procedure (dmlset in out dept_emp_tab) is
begin
     for i in 1..dmlset.count loop
          delete from emp where empno = dmlset(i).empno;
     end loop;
end delete_procedure;
END;

for ur q1:
create the text items manually in the layout editor or in the obj navigator then specify there properties manually in the the pallette.
database item = yes
column name = field name in ur select statement
for q2:
try running the form again and press F8 then if an error occur press F1 or shift F1 to show the error in ur code.
i suspect u forgot to specify a value for the in parameter the reason why u get an error that is specify the actual parameter for ur in argument then press F8.
enjoy!

Querying Date ranges

I'm a beginner with Crystal. I am creating a report that needs to prompt the user for a start and end date. I have the parameter created and it prompts the user. But the query doesnt seem to use the dates I enter. I have had to enter start and end dates in the select expert/record function and it seems to use those. What am I missing? I've stated "is between" in the drop down and I expected to see my parameter field listed but its not there. Its only there if I switch to "is equal to". any ideas are greatly appreciated.
do I need to specify a formula? and if so, what is the syntax? I tried a formula but it didnt like when I put in my parameter field. I got an "it must be a date" error.
Dave

Hi David,
You need to ensure that your date parameter is of datatype, Date or DateTime depending on your database date values.
You will need to insert the following logic into your select expert:
{Database.DateField} <= {?End Date Parameter} and
{Database.DateField >= {?Start Date Parameter}
This should give you everything in between.
I hope this helps.
Regards,
Zack H.

Oracle Personal Edition, data corruption in Long datatype column

Oracle Personal Edition, data corruption in Long datatype column
DATA Corruption in Oracle 8i Personal edition
I am using a Long data type column to store a big text. In oracle Enterprise edition the data stored correctly. But in the Oracle Personal Edition, the Long data type column data corrupted. Some letters in the text are replaced by special character chr(0).
The following data has been taken from a column (Which is of data type LONG).
1. In the first one column name Template_ID stored correctly but in the second one T is missing. Some special characters has stored in that place. (Difference is in 6th Line)
CREATED_DATE####09-21-2001 16:02:00$$LANGUAGE_ID####99$$LOWER_LIMIT####$$MEASURE
ID####810200082001000004$$MODIFIEDDATE####09-21-2001 16:02:00$$SERVICE_RECEIVED####I$$SERVICE_RECORD####PO:F$$STEP_CODE####8$$STEP_RESULT####Failed$$STEP_ROW_
ID####2$$TEMPLATE_ID####M116XX$$TEXT####$$UNIQUE_ID####810200082001$$UPPER_LIMIT
CREATED_DATE####09-21-2001 16:02:00$$LANGUAGE_ID####99$$LOWER_LIMIT####$$MEASURE
ID####810200082001000004$$MODIFIEDDATE####09-21-2001 16:02:00$$SERVICE_RECEIVED####I$$SERVICE_RECORD####PO:F$$STEP_CODE####8$$STEP_RESULT####Failed$$STEP_ROW_
ID####2$$TEMPLA E_ID####M116XX$$TEXT####$$UNIQUE_ID####810200082001$$UPPER_LIMIT
2. In the first one column name Template_ID stored correctly but in the second one E is missing. Some special characters has stored in that place. (Difference is in 6th Line)
CREATED_DATE####09-21-2001 16:01:19$$LANGUAGE_ID####99$$LOWER_LIMIT####$$MEASURE
ID####810200082001000002$$MODIFIEDDATE####09-21-2001 16:01:19$$SERVICE_RECEIVED####U$$SERVICE_RECORD####P:F$$STEP_CODE####7$$STEP_RESULT####Failed$$STEP_ROW_I
D####2$$TEMPLATE_ID####78580A$$TEXT####$$UNIQUE_ID####810200082001$$UPPER_LIMIT#
CREATED_DATE####09-21-2001 16:01:19$$LANGUAGE_ID####99$$LOWER_LIMIT####$$MEASURE
ID####810200082001000002$$MODIFIEDDATE####09-21-2001 16:01:19$$SERVICE_RECEIVED####U$$SERVICE_RECORD####P:F$$STEP_CODE####7$$STEP_RESULT####Failed$$STEP_ROW_I
D####2$$TEMPLAT ID####78580A$$TEXT####$$UNIQUEID####810200082001$$UPPER_LIMIT#

See if this helps you any:
Re: Google Maps

Querying Data from 3rd Party System

We would like to query data from a 3rd party (non-SAP) system. Our BW is an MSSQL DB and the 3rd party is also an MSSQL DB. We do not want to physically load the data from the external system we just want to use the BW query tools to display the data.
Is this possible? I thought this is what a Remote Cube would be used for but SAP's instructions on Remote Cubes are vague and confusing.
       1.      In BW, create a source system for the external system that you want to use.
       2.      Define the required InfoObjects.
       3.      Load the master data:
·        Create a master data InfoSource for each characteristic
·        Load texts and attributes
       4.      Define the RemoteCube
       5.      Define the queries based on the RemoteCube

Hi Jon,
SAP RemoteCube is an InfoProvider. This is a special RemoteCube that allows
you to define queries with direct access to transaction data in other SAP systems. SAP RemoteCubes are defined on the basis of an InfoSource with flexible updating, and assume the characteristics and key figures of the InfoSource.
Use/Data Flow
Unlike with other RemoteCubes, it is not necessary to program extractors. The
same extractors are used to select data in the source system that are also used when replicating data into the BW. When executing a query, each navigation step sends a request to the extractors for the assigned source systems. In addition, characteristics selection and selection criteria for these characteristics are transformed to fields in the transfer structure, in accordance with the transfer rules. They are transferred to the extractor in this form. The delivered datasets run through the transfer rules in BW and are filtered once again in the query.
In your case Remote cube can be an option .
Cheers
Raja

Extra column in BW query data?

I'm getting an extra blank column in my BW query data that does not show in data preview mode. I'm expecting data, based on the preview to look like this:
CCtr   Yr    Amt   Qty
375   2010   10     10
But getting instead:
CCtr   Yr    Blank    Amt   Qty
375   2010              10      10
I'm sure there is probably a workaround for this, but it seems like a bug. Anyone else experiencing this with the "direct" connection to BW query?
I'm on Xcelsius 5.3.4.0, Build 12,3,4,1038. BW 7.01 SP6.
Thanks,
Brian Aldrich

Thanks all-
Turns out that this was an issue caused by a scaling factor in one of the columns in the BW query. I had the amount scaled to thousands and the query relusts were putting a "*1000" every so many rows in the data...in the column that was (mostly) blank. It placed that text every 6 or so rows. This did not show in the query in BW or the data preview feature in Xcelsius. Since my initial data retrieval was 5 rows, I didn't see this, but when I brought in a larger number of rows, it showed up.
I turned the scaling factor off in the query to resolve the issue.
Cheers,
Brian
P.S. Someone in another thread suggested adding a spreadsheet table to the canvas to help with data preview...this was a huge help in finding the issue. Highly recommended!

Sybase 'TEXT' datatype

i am trying to update one of the sybase table which has 'TEXT' datatype for one of the column,
In general how do we query this 'TEXT' datatype in Java i.,e Casting object, Hope this is not a String ?
Any help with the code to retrieve this 'TEXT' field is appreciated,
Thanks
Mathew

I am doing this below ...
public int updateCustomSQL(String headerInfo,String upString,String caseObjId) throws DAOException
        String methodName = "queryUpdateCustomSQL";
        LogMgr.debug(this.getClass(),methodName,"you are in queryUpdateCustomSQL");
        ResultSet rst;
        int rowsReturned = 0;
        LogMgr.debug(this.getClass(), methodName, "query string obtained =" + headerInfo.toString());
        try
            getConnection();
            LogMgr.debug(this.getClass(), methodName, "headerInfo obtained =" + headerInfo);
            PreparedStatement pstmt1 = conn.prepareStatement(
            "SELECT objid,case_history as caseHistory FROM table_case WHERE objid = ?");
            int numericCaseId = new Integer(caseObjId).intValue();
            pstmt1.setInt(1,numericCaseId);
            rst = pstmt1.executeQuery();
            java.sql.Clob clob = null;
            while (rst.next()) {
                //clob = rst.getClob("case_history");
            if(clob != null){
            long length = clob.length();
            LogMgr.debug(this.getClass(),methodName,"length of the clob =" + length);
            clob.setString(length + 1,headerInfo);
            PreparedStatement pstmt2 = conn
                        .prepareStatement("UPDATE table_case SET case_history = ? WHERE objid = ?");
            pstmt2.setClob(1,clob);
            pstmt2.setInt(2,new Integer(caseObjId).intValue());
            rowsReturned = pstmt2.executeUpdate();
        catch (Exception ex)
            LogMgr.debug(this.getClass(), methodName, "exception occurred while updating =" + ex.toString());
        LogMgr.debug(this.getClass(), methodName, "rows returned =" + rowsReturned);
        return rowsReturned;
    }The method com.sybase.jdbc2.jdbc.SybResultSet.getClob(String) is not supported and should not be called.
let me know if i can use any other method instead of getClob()
Thanks
KM

Get value of formula variable during query runtime into a text variable

Hi all,
I wanna get the value of the formula variables during the query runtime into a text variable.
My scenario is like this: First I defined a formula variable Z_DATE_3 which is processing by replacement. It will get the day of a characteristcs(Startdate).
Then I defined a text variable and in the function module related to this text variable, I used the parameter I_T_VAR_RANGE which can store the value of formula variable during the query runtime.So I can read the value from this table in my function module.
But I have a issue, when I run the query which used the defined text variable, it seems that it doesn't call the corresponding function module. Because I set a breadpoint in hte code and it never reach this breakpoint.
If I removed the parameter I_T_VAR_RANGE , it can enter the function module.
So could you please give some advice?
Is my solution correct or not?
And what's wrong with the parameter I_T_VAR_RANGE? Did I use it correctly?
And My code is:
DATA: l_s_range_v TYPE rrrangeexit,
             l_day type sy-datum.
if i_step <> 2.
raise no_processing.
endif.
READ TABLE i_t_var_range INTO l_s_range_v
     WITH KEY vnam = 'Z_DATE_3'.
if sy-subrc = 0.
     l_day = l_s_range_v-low.
endif.
Thanks in advance!
Best regards
Fanchest

Hi, Fanchest,
I'm having just the same issue. Did you find a solution?
I wrote a short routine in CMOD to derive the value of a formula variable to a text variable, but it's not working (I don't get any value). Can you share your solution?
Thanks in advance,
LL

InfoProvider: infoObject (master data attribute and text)

I saw info Object of master data attribute and text in InfoProvider.
are infoObject act like a table when we do query on them.

Hi
Refer to this as down
Custome Infoobjects Tabels:
/BIC/M -- View of Master data Tables
/BIC/P -- Master data Table, Time Independent attributes
/BIC/Q -- Master data Table, Time Dependent attributes
/BIC/X -- SID Table, Time Independent
/BIC/Y -- SID Tabel, Time Dependent
/BIC/T -- Text Table
/BIC/H -- Heirarchy Table
/BIC/K -- Heirarchy SID Table
Standard Infoobjects Tabels(Buss. Content):
Replace "C" with "0" in above tables.
Ex: /BI0/M -- View of Master data Tables

Master data attr./text/hier. loading

According to best practice for Headcount and Personnel Actions( 0PA_C01), we have to do several process after infocube activation. e.g. active Query, query view, and loading transaction data.
The question is when should we load master data attr./text/hier. ? Why does SAP do not put it on the best practice document?

Hi,
You should always load Master data before transactional data. This helps in loading transactional data faster as the SID tables are already populated once you load the master data and helps master data load performance. Make sure that the loaded master data is followed by an attribute change run always as if this step is not executed, the loaded master data will not take effect.
Also in terms of reporting, if any users are accessing the queries and master data is missing at that point of time (might be loaded later), then the reports for those characteristics are going to show up as # (not assigned) and make no sense for reporting.
If the referential integrity box is checked during transactional data load, the loads will fail if relevant master data is not loaded first.
So, always load master data first, followed by attribute change run and then load the transactional data.
Cheers,
Kedar

How to load Test data from a Text file in ECATT

Hi,
I have created a test configuration with a test script, system data container, and test data container.
I have done the recording of a transaction and created the script. Parameterization is done for the script and have imported those parameters from script in to the data container.
I am trying to load a the data from a text file on the local work-station. The data is not being read.
Please explain this in detail (step by step) as I am very new to ECATT.
I am trying this on SAP ECC 6.0 IDES server.
Thanks in Advance
Vikas Patil

Please explain this in detail (step by step) as I am very new to ECATT.
Thanks in Advance
Vikas Patil

Querying data in a text datatype in informix

Similar Messages

Maybe you are looking for