Question about Tutorial: Developing RIA Web Applications with Oracle ADF

I'm learning about ADF and JDeveloper:
According to the tutorial, after I've bound the data controls for the top right panel and bottom right panel, the bottom panel should always show the employee selected from the collection above.
However when I do the instructions, the employee information in the bottom right employee area never changes regardless if I select a different employee in the top panel collection.
I can't figure out why the top and bottom panels don't link together. I'm using the same View in both panels....
I'm using Build JDEVADF_11.1.1.1.0_GENERIC_090615.0017.5407
Thanks in advance for any suggestions!
Rob

The mechanism that synch the two section of the page is called partial page rendering.
It should work if you follow the instructions in the tutorial, but if it doesn't it is quite easy to fix:
In the structure pane, select the Form component that surrounds the employees update section
Then look at the properties inspector for a property call partial trigger
Click the arrow on the right of it to select edit - and navigate your page hierarchy to choose the table component.
An example is here:
http://blogs.oracle.com/shay/2008/05/master_with_two_details_on_the.html

Similar Messages

Developing Rich Web Applications With Oracle ADF Tutorial

Using J Developer
Oracle IDE
12.1.2.0.40.66.68
In Part 3 Step 2.2 In the query.jsf page the tutorial reads
2 Still in the Properties window expand the Behavior node and set the AutoSubmit property to True.
The problem is the only option listed under Behavior is Landmark. The other properties are not shown including the
AutoSubmitt which I need to set to True.
Any Ideas on whats going on?
Thanks in advance!

Hi,
would have been of great help if you provided the link to the tutorial (just for next time). You can see that the focus in the screen shot is on the salary field. The screen shot below then shows the behavior property palette and clearly you can see that there is an autosubmit property. Chances are that you did not put the cursor focus properly on the input text component or the Property Inspector did not refresh. In the latter case, close and re-open the property inspector or select the input text component in Structure Window
Frank

Problem with tutorial; "Build a Web Application with JDeveloper 11g Using "

I've got a rather new installation of Vista Business x64 on my developer rig, and last week I installed the new JDeveloper 11g version. The installation was all-inclusive, no customization on my end.
In addition I've got a test installation of an Oracle DB 11gR1 on an available server here.
To familiarize myself with the new JDeveloper I decided to spend some time with the JDeveloper 11g tutorials found here: http://www.oracle.com/technology/obe/obe11jdev/11/index.html.
I've started twice on the second tutorial, "Build a Web Application with JDeveloper 11g Using EJB, JPA, and JavaServer Faces", and find myself repeatedly stuck at step 19 in section "Creating the Data Model and Testing it".
It seems impossible to deploy the application to the default application server. The server starts fine on its own, I can access it via the admin console on port 7001 and it looks good. However, when I try to run the HRFacadeBean funny things are happening, symptomized by the following error messages seen in the IDE log-area:
The "Messages" pane displays:
"Compiling...
Context: MakeProjectAndDependenciesCommand application=HR_EJB_JPA_App.jws project=EJBModel.jpr
C:\Oracle\Middleware\jdk160_05\jre\bin\java.exe -jar C:\Oracle\Middleware\jdeveloper\jdev\lib\ojc.jar -g -warn -nowarn:320 -nowarn:372 -nowarn:412 -nowarn:413 -nowarn:415 -nowarn:486 -nowarn:487 -nowarn:489 -nowarn:556 -nowarn:558 -nowarn:560 -nowarn:561 -nowarn:705 -Xlint:-fallthrough -Xlint:-serial -Xlint:-unchecked -source 1.6 -target 1.6 -noquiet -encoding Cp1252 -d C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\classes -namereferences -make C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\classes\EJBModel.cdi -classpath C:\Oracle\Middleware\jdk160_05\jre\lib\resources.jar;C:\Oracle\Middleware\jdk160_05\jre\lib\rt.jar;C:\Oracle\Middleware\jdk160_05\jre\lib\jsse.jar;C:\Oracle\Middleware\jdk160_05\jre\lib\jce.jar;C:\Oracle\Middleware\jdk160_05\jre\lib\charsets.jar;C:\JDeveloper\mywork\HR_EJB_JPA_App\.adf;C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\classes;C:\Oracle\Middleware\jdeveloper\modules\oracle.toplink_11.1.1\toplink.jar;C:\Oracle\Middleware\modules\com.bea.core.antlr.runtime_2.7.7.jar;C:\Oracle\Middleware\modules\javax.persistence_1.0.0.0_1-0.jar;C:\Oracle\Middleware\jdeveloper\modules\oracle.toplink_11.1.1\eclipselink.jar;C:\Oracle\Middleware\jdeveloper\modules\oracle.xdk_11.1.1\xmlparserv2.jar;C:\Oracle\Middleware\jdeveloper\modules\oracle.xdk_11.1.1\xml.jar;C:\Oracle\Middleware\modules\javax.jsf_1.2.0.0.jar;C:\Oracle\Middleware\modules\javax.ejb_3.0.1.jar;C:\Oracle\Middleware\modules\javax.enterprise.deploy_1.2.jar;C:\Oracle\Middleware\modules\javax.interceptor_1.0.jar;C:\Oracle\Middleware\modules\javax.jms_1.1.1.jar;C:\Oracle\Middleware\modules\javax.jsp_1.1.0.0_2-1.jar;C:\Oracle\Middleware\modules\javax.jws_2.0.jar;C:\Oracle\Middleware\modules\javax.activation_1.1.0.0_1-1.jar;C:\Oracle\Middleware\modules\javax.mail_1.1.0.0_1-1.jar;C:\Oracle\Middleware\modules\javax.xml.soap_1.3.1.0.jar;C:\Oracle\Middleware\modules\javax.xml.rpc_1.2.1.jar;C:\Oracle\Middleware\modules\javax.xml.ws_2.1.1.jar;C:\Oracle\Middleware\modules\javax.management.j2ee_1.0.jar;C:\Oracle\Middleware\modules\javax.resource_1.5.1.jar;C:\Oracle\Middleware\modules\javax.servlet_1.0.0.0_2-5.jar;C:\Oracle\Middleware\modules\javax.transaction_1.0.0.0_1-1.jar;C:\Oracle\Middleware\modules\javax.xml.stream_1.1.1.0.jar;C:\Oracle\Middleware\modules\javax.security.jacc_1.0.0.0_1-1.jar;C:\Oracle\Middleware\modules\javax.xml.registry_1.0.0.0_1-0.jar;C:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar;C:\Oracle\Middleware\wlserver_10.3\common\lib -sourcepath C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src;C:\Oracle\Middleware\jdk160_05\src.zip;C:\Oracle\Middleware\jdeveloper\modules\oracle.toplink_11.1.1\toplink-src.zip;C:\Oracle\Middleware\jdeveloper\modules\oracle.toplink_11.1.1\eclipselink-src.zip C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src\oracle\Dept.java C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src\oracle\Emp.java C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src\oracle\HRFacadeLocal.java C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src\oracle\HRFacadeClient.java C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src\oracle\HRFacade.java C:\JDeveloper\mywork\HR_EJB_JPA_App\EJBModel\src\oracle\HRFacadeBean.java
[11:45:27 PM] Successful compilation: 0 errors, 0 warnings.
[Application HR_EJB_JPA_App is bound to Server Instance DefaultServer]
[Starting Server Instance DefaultServer]
#### Server Instance DefaultServer could not be started: Server Instance was terminated.
The "Running: DefaultServer" displays:
"C:\Oracle\Middleware\user_projects\domains\base_domain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
[Server Instance DefaultServer is shutting down. All applications currently running will be terminated and undeployed.]
Process exited.
C:\Oracle\Middleware\user_projects\domains\base_domain\bin\stopWebLogic.cmd
Stopping Weblogic Server...
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Connecting to t3://localhost:7101 with userid weblogic ...
This Exception occurred at Wed Oct 29 23:47:40 CET 2008.
javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://localhost:7101: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection refused: connect; No available router to destination]
     at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
     at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:783)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:365)
     at weblogic.jndi.Environment.getContext(Environment.java:315)
     at weblogic.jndi.Environment.getContext(Environment.java:285)
     at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:197)
     at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTHelper.java:512)
     at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLSTHelper.java:565)
     at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.java:305)
     at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:203)
     at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:60)
     at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLSTUtil.java:125)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)
     at org.python.core.PyMethod.__call__(PyMethod.java:96)
     at org.python.core.PyObject.__call__(PyObject.java:248)
     at org.python.core.PyObject.invoke(PyObject.java:2016)
     at org.python.pycode._pyx4.connect$1(<iostream>:16)
     at org.python.pycode._pyx4.call_function(<iostream>)
     at org.python.core.PyTableCode.call(PyTableCode.java:208)
     at org.python.core.PyTableCode.call(PyTableCode.java:404)
     at org.python.core.PyFunction.__call__(PyFunction.java:184)
     at org.python.pycode._pyx16.f$0(C:\Oracle\Middleware\user_projects\domains\base_domain\shutdown.py:1)
     at org.python.pycode._pyx16.call_function(C:\Oracle\Middleware\user_projects\domains\base_domain\shutdown.py)
     at org.python.core.PyTableCode.call(PyTableCode.java:208)
     at org.python.core.PyCode.call(PyCode.java:14)
     at org.python.core.Py.runCode(Py.java:1135)
     at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167)
     at weblogic.management.scripting.WLST.main(WLST.java:129)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.WLST.main(WLST.java:29)
Caused by: java.net.ConnectException: t3://localhost:7101: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection refused: connect; No available router to destination
     at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:203)
     at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
     at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextFactoryDelegate.java:344)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:339)
     ... 38 more
Caused by: java.rmi.ConnectException: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection refused: connect; No available router to destination
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:464)
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:315)
     at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:251)
     at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:194)
     at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:225)
     at weblogic.rjvm.RJVMFinder.findOrCreateRemoteCluster(RJVMFinder.java:303)
     at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:193)
     ... 43 more
Problem invoking WLST - Traceback (innermost last):
File "C:\Oracle\Middleware\user_projects\domains\base_domain\shutdown.py", line 1, in ?
File "<iostream>", line 22, in connect
WLSTException: Error occured while performing connect : Error getting the initial context. There is no server running at t3://localhost:7101 Use dumpStack() to view the full stacktrace
Done
I'm not that familiar with these things but it seems to me that there is an issue with port numbers here. The application seems to expect a app.server service at port 7101, but does'nt find one.
Any suggestions on how to fix this problem would be appreciated?
LA$$E

Jupp,
It fails in a similar way.
What I did was; create a simle 'Hello World' html file, saving it with the jsp extension. In Jdev11g i made a new application and an emtpy project, then loaded the jsp file and made it the default run-target. This compiles nicely.
When running the project it first attempts to start the WebLogicServer (WLS). After a few minutes it is started as seen in the "Running: DefaultServer" pane:
C:\Oracle\Middleware\user_projects\domains\base_domain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=;C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.5/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\Middleware\jdeveloper\modules\features\adf.share_11.1.1.jar;;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;;
PATH=C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.5\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\oracle_client\product\11.1.0\client_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -DproxySet=false -Djbo.34010=false -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Ddomain.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1 -Doracle.home=C:\Oracle\Middleware\jdeveloper -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\oracle\jps-config.xml -Doracle.dms.context=OFF -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Xms1024m -Xmx1024m -XX:MaxPermSize=256m -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar>
<30.okt.2008 kl 19.20 CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
<30.okt.2008 kl 19.20 CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3 Mon Aug 18 22:39:18 EDT 2008 1142987 >
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30.okt.2008 kl 19.20 CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<30.okt.2008 kl 19.20 CET> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<30.okt.2008 kl 19.20 CET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<30.okt.2008 kl 19.20 CET> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<30.okt.2008 kl 19.20 CET> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30.okt.2008 kl 19.20 CET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<30.okt.2008 kl 19.20 CET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
<30.okt.2008 kl 19.20 CET> <Warning> <Server> <BEA-002611> <Hostname "Kromp.lan", maps to multiple IP addresses: 10.0.0.8, 127.0.0.1>
<30.okt.2008 kl 19.20 CET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.0.0.8:7001 for protocols iiop, t3, ldap, snmp, http.>
<30.okt.2008 kl 19.20 CET> <Warning> <Server> <BEA-002611> <Hostname "127.0.0.1", maps to multiple IP addresses: 10.0.0.8, 127.0.0.1>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "base_domain" running in Development Mode>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<30.okt.2008 kl 19.20 CET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
DefaultServer startup time: 121552 ms.
DefaultServer started.
In the "Messages" pane, however, things are not looking so good:
Context: MakeProjectAndDependenciesCommand application=TestAppJsp.jws project=TestProjJsp.jpr
[7:20:49 PM] Successful compilation: 0 errors, 0 warnings.
[Application TestAppJsp is bound to Server Instance DefaultServer]
[Starting Server Instance DefaultServer]
#### Server Instance DefaultServer could not be started: Server Instance was terminated.
But, of course, the server is actually running as I can access it via its Admin Console.
So, I try to run the project again, and this time the following is shown in the "Messages" pane:
Compiling...
Context: MakeProjectAndDependenciesCommand application=TestAppJsp.jws project=TestProjJsp.jpr
[7:26:39 PM] Successful compilation: 0 errors, 0 warnings.
[Application TestAppJsp is bound to Server Instance DefaultServer]
[Starting Server Instance DefaultServer]
#### Server Instance DefaultServer could not be started: Server Instance was terminated.
The "Running: DefaultServer" now comes up with:
C:\Oracle\Middleware\user_projects\domains\base_domain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
[Server Instance DefaultServer is shutting down. All applications currently running will be terminated and undeployed.]
Process exited.
The WLS is still running though as I can still access its adm console.
To me it seems that it is attempting to start a separate instance of the WLS for each run attempt, but then I could be wrong.....:(
Later I'll try to change the default WLS port from 7001 to 7101 as suggested in another port here.
I must admit that I'm a bit surprised that the JDev11g doesn't work fine at this very simple level when performing a default install.

DW 8 Tutorial - Developing a Web Application - ERROR

Hi, I am new at this and using the Dreamweaver 8 Tutorial,
Developing a Web Application. Everything went fine until the very
end, when I tried to submit data to the document. I got the
following error message. I have searched online for a solution and
haven't been able to find it. I am new at this (obviously) and
would appreciate any help you could give me. Here is the error
message:
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver] Operation must use
an updateable query.
/MySampleApps/send.asp, line 115
Browser Type:
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR
1.1.4322)
Page:
POST 59 bytes to /MySampleApps/send.asp
POST Data:
FIRST_NAME=s&LAST_NAME=s&EMAIL=s&COMMENTS=s&MM_insert=form1
Time:
Friday, August 01, 2008, 10:53:58 AM

Oops!
http://livedocs.adobe.com/dreamweaver/8/using/31_trou7.htm
http://www.adobe.com/go/tn_18984
Ken Ford
Adobe Community Expert - Dreamweaver/ColdFusion
Fordwebs, LLC
http://www.fordwebs.com
"Ken Ford" <[email protected]> wrote in message
news:g71tvt$ro4$[email protected]..
> It is a permissions problem with the database:
>
>
> --
> Ken Ford
> Adobe Community Expert - Dreamweaver/ColdFusion
> Fordwebs, LLC
>
http://www.fordwebs.com
>
>
> "squatier" <[email protected]> wrote in
message news:g6vj9i$c5n$[email protected]..
>> Hi, I am new at this and using the Dreamweaver 8
Tutorial, Developing a Web
>> Application. Everything went fine until the very
end, when I tried to submit
>> data to the document. I got the following error
message. I have searched
>> online for a solution and haven't been able to find
it. I am new at this
>> (obviously) and would appreciate any help you could
give me. Here is the error
>> message:
>>
>>
>> Error Type:
>> Microsoft OLE DB Provider for ODBC Drivers
(0x80004005)
>> [Microsoft][ODBC Microsoft Access Driver] Operation
must use an updateable
>> query.
>> /MySampleApps/send.asp, line 115
>>
>>
>> Browser Type:
>> Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1;
.NET CLR 1.1.4322)
>>
>> Page:
>> POST 59 bytes to /MySampleApps/send.asp
>>
>> POST Data:
>>
FIRST_NAME=s&LAST_NAME=s&EMAIL=s&COMMENTS=s&MM_insert=form1
>>
>> Time:
>> Friday, August 01, 2008, 10:53:58 AM
>>
>>
>>
>>

Integrate Web application with Oracle BPM

Hi,
Can you guide me in achieving the following scenario:
1. Integration web application with oracle BPM
Say, I have a application where I need to trigger an event to call Oracle BPM. For ex: On click of submit button call the Oracle BPM workflow to do some process and then revert back to the same application with an alert or status message. Please let me know the steps to acheive this.
Thanks
ST

Hi,
I take from this description that you currently have your Web Application and you would possibly like to trigger or create an instance into an OBPM business process. If this is the case, you have several options available here:
a) Use PAPI (Java API).
b) Use PAPI-Ws (SOAP API).
c) Use some sort of communication channel that the process is implemented to listen (for example a JMS Queue or Topic).
For the first 2, you can try to take a look into the official Documentation page for OBPM through this link: http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/index.html (Check the For Developers section).
If I have miss interpreted your question, please do not hesitate to provide more details.
Cheers,
eduardoc.

Tutorial: Developing Applications with Oracle ADF UIX

I have jdeveloper version 10.1.2.0.0.
The above tutorial works fine up to the point where I have to create an event handler for the 'edit' button. At this point we are asked to right click on the new event and select 'insert inside event'...............select UIX controller. On my version of jdeveloper there is no UIX controller item. There is a 'UIX servlet' item. If I select this and then follow the instructions I eventually get a '404 not found' error message when I try and run the application.
The url for the tutorial is http://www.oracle.com/technology/obe/obe_as_1012/j2ee/develop/client/uix/lesson_uix.htm.
How do I complete the creation of an event handler with my version of jdeveloper.

create/update should be commited to database due to method "Commit" that you drop into commit data action, and delete won't be commited, you should additionaly create "Commit" button on your page or use another way to commit.

Integrating existing Web application with Oracle Portal

Hi,
I have an existing application which is purely written in servlets and which is in use for quite some time. I have a requirement now of moving this application onto the Oracle Portal.
I was just wondering if we have any quick meanse of doing this or we have to re develop from scratch in oracle Portal server(ByDefining page, Page templates..etc).
Advance thanks for your help
Thanks
Sreedhar

What do you mean with "moving this application onto the Oracle Portal"?
The best expedite way is use in the portal a LINK that direct your users to the actual app.
Another quick thing you could do is use the IFRAME TAG (only works in IE). This way you can embed your app in Portal (show it in some area in portal)
Then comes the complex things:
- You can activate SSO to your applications ( which is not THAT difficult)
- You can PORTLATIZATE your app, this doesn't means that you have to rewrite all, but still you need to write in a "Oracle Java Way" some thing to get it work..
You can see this link if you're using portal 10.1.2:
http://download-east.oracle.com/docs/cd/B14099_19/portal.1012/b14134/pdg_java_intro.htm

Develop iPhone Web applications

This is regarding the article “Develop iPhone Web applications with Eclipse” article posted on "http://www.ibm.com/developerworks/library/os-eclipse-iphone/".
I have refer the article. It would be great if somebody will advise on the below :
Problem - 1: I am trying to develop an iPhone Web Application –(client ) using eclipse IDE( version - 3.3 Europa)
as mentioned in the article :
Setp 3 : Add Aptana to this list by clicking New Remote Site and defining it with a URL of http://update.aptana.com/update/3.2/.
It is not working getting error “Network connection error”. Even when I tried to download the same from the Browser (Safari and FireFox) it is not working .
Is there any other way to download the same from Network – Please Guide .
Problem – 2 :
I also want to use iUI kit for iPhone web application Development .
But I am not able to understand how to proceed for the same .
Does iUI kit work only with Eclipse . If yes is there any specific version which we need to download ?
Please forward the link which gives me details about “How develop web apps for iPhone using iUI kit”
Looking forward for your valuable inputs .
Best Regards,

This is the incorrect forum for that type of information.
I would suggest you direct your questions towards the forums for developers.
These can be found at developer.apple.com/iphone and http://developer.apple.com/devforums/

How to integrate android application with oracle database using oracle mobile database server.

Hi,
I developed one web application using oracle database. I want to implement same web application in android. My problem is how to integrate android application with existing oracle database using oracle database mobile server. Can u please guide me how to install oracle database mobile server and how to integrate android app with existing oracle database..
Thank you.

In the Database Mobile Doc set there is an entire book that covers the Installation of Oracle Database Mobile Server. Chap 4 of that book contains screen shots and all kinds of information that will help guide you through the installation. We also have a doc on the different mobile clients. Chap 2 of that guide covers installs and integration of an android app.
thanks
mike

Documentation about basic steps of develop an a application with NetBeans

Hi!
I'm new with JSF, and I dare to ask you to help me in the following problem:
Where can I find a documentation(electronic preferable) about step by step development of an application with NetBeans / Visual JSF Web Application/Woodstock Component?
I expect from such a documentation 2 things:
*1* explanation of the components (NetBeans / Visual JSF Web Application/Woodstock Components)
*2* step by step explaining how to create the basic/main features of an application(search features, master/detail views of tables, reporting, user authentication, etc.)
Thanks !

I mean, something like "a good practices manual" for NetBeans / Visual JSF Web Application/Woodstock Component.
Thanks!

Hi, I developed a web application using HTML5-Offline Application Cache mechanism. Inspite of deleting the cache as mentioned in the above steps, Firefox still maintains a copy of the page in it's cache. Also, a serious bug is, even though we delete all

== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
Hi,
I developed a web application using HTML5-Offline Application Cache mechanism. Inspite of deleting the cache as mentioned in the above steps, Firefox still maintains a copy of the page in it's cache. Also, a serious bug is, even though we delete all temp files used by Firefox, and open the previously cached page, it displays it correctly, but upon refreshing/reloading it again shows the previous version of the page maintained in the cache.
== Troubleshooting information
==
HTML5: Application Caching
.style1 {
font-family: Consolas;
font-size: small;
text-align: left;
margin-left: 80px;
function onCacheChecking(e)
printOutput("CHECKINGContents of the manifest are being checked.", 0);
function onCacheCached(e) {
printOutput("CACHEDAll the resources mentioned in the manifest have been downloaded", 0);
function onCacheNoUpdate(e)
printOutput("NOUPDATEManifest file has not been changed. No updates took place.", 0);
function onCacheUpdateReady(e)
printOutput("UPDATEREADYChanges have been made to manifest file, and were downloaded.", 0);
function onCacheError(e) {
printOutput("ERRORAn error occured while trying to process manifest file.", 0);
function onCacheObselete(e)
printOutput("OBSOLETEEither the manifest file has been deleted or renamed at the source", 0);
function onCacheDownloading(e) {
printOutput("DOWNLOADINGDownloading resources into local cache.", 0);
function onCacheProgress(e) {
printOutput("PROGRESSDownload in process.", 0);
function printOutput(statusMessages, howToTell)
* Outputs information about an event with its description
* @param statusMessages The message string to be displayed that describes the event
* @param howToTell Specifies if the output is to be written onto document(0) or alert(1) or both(2)
try {
if (howToTell == 2) {
document.getElementById("stat").innerHTML += statusMessages;
window.alert(statusMessages);
else if (howToTell == 0) {
document.getElementById("stat").innerHTML += statusMessages;
else if (howToTell == 1) {
window.alert(statusMessages);
catch (IOExceptionOutput) {
window.alert(IOExceptionOutput);
function initiateCaching()
var ONLY_DOC = 0;
var ONLY_ALERT = 1;
var BOTH_DOC_ALERT = 2;
try
if (window.applicationCache)
var appcache = window.applicationCache;
printOutput("BROWSER COMPATIBILITYSUCCESS!! AppCache works on this browser.", 0);
appcache.addEventListener('checking', onCacheChecking, false);
appcache.addEventListener('cached', onCacheCached, false);
appcache.addEventListener('noupdate', onCacheNoUpdate, false);
appcache.addEventListener('downloading', onCacheDownloading, false);
appcache.addEventListener('progress', onCacheProgress, false);
appcache.addEventListener('updateready', onCacheUpdateReady, false);
appcache.addEventListener('error', onCacheError, false);
appcache.addEventListener('obsolete', onCacheObselete, false);
else
document.getElementById("stat").innerHTML = "Failure! I cant work.";
catch (UnknownError)
window.alert('Internet Explorer does not support Application Caching yet.\nPlease run me on Safari or Firefox browsers\n\n');
stat.innerHTML = "Failure! I cant work.";
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 ( .NET CLR 3.5.30729; .NET4.0E)
== Plugins installed
==
*-Shockwave Flash 10.0 r45
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Google Update
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object
Thanks & Regards,
Kandarpa Chandrasekhar Omkar
Software Engineer
Wipro Technologies
Bangalore.
[email protected]
[email protected]

We have had this issue many, many times before including on the latest 3.6 rev. It appears that when the applicationCache has an update triggered by a new manifest file, the browser may still use only its local network cache to check for updates to the files in the manifest, instead of forcing an HTTP request and revalidating both the browser cache and the applicationCache versions of the cached file (seems there is more than one). I have to assume this is a browser bug, as one should not have to frig with server Cache-Control headers and such to get this to work as expected (and even then it still doesn't sometimes).
The only thing that seems to fix the problem is setting network.http.use-cache to false (default is true) in about:config . This helps my case because we only ever run offline (applicationCache driven) apps in the affected browser (our managed mobile apps platform), but it will otherwise slow down your browser experience considerably.

Web application with capable of auto update

Hi All,
I have been developing the webapplications using struts (J2ee Technology) and i have developed few web applications and send to the production. now i want to add autoupdate capability of the application, means if any changes was made jsp/action class then application must have capability of updatin the new code.
is my thought/requirements come in reality?
Can anyone suggest/recommend the approach.
Thanks in advance

Thank you
Struts is not a JEE technology; its a framework built by Apache.I agree, but given as example,consider servelts are example now.
you have a version of the web application running and when you make changes in your code you see these >>changes in the running application without having to restart the server. Am I correct this time?Yes you are correct!!.. Thanks
If so: did you try starting the server in debug mode? How to do that depends on what IDE you're using, you >>should google it.I am talking about the appliction running in production. What is the relation of IDE and debug mode
Can you please elobarate!!..
Once again my requirement is , Jsps and servlets are packed into war(app version 1.0) and sent customer environment ,
The application is running at customer place, now couple of servlets which was packed in app version 1.0, have been added new functionalites and packed into war(app version2.0).
I need to add capability of updating the version2.0 with replacement of version1.0 which is at client place. How can i do this
Do i need to container help or any other third party tools can be used for this
I am using Tomcat7
Hope i explained detail
Thanks
Dorairaj
Java TeamLead

Issue of deploying a fusion Web Application with integrated Weblogic server

Hi,
i'm using Jdev 11.1.1.3.0 to develop a fusion web application, with a model and ViewController Projects.
When i try to deploy this application with the integrated server, i have any issues.
The origin seems to be that it builds an application with 3 profiles. The model application is recognized and deployed as a webapp and not an ADF library as it should be..
[11:00:45 PM] Retrieving existing application information
[11:00:45 PM] Running dependency analysis...
[11:00:45 PM] Deploying 3 profiles...
[11:00:46 PM] Wrote Web Application Module to /home/david/.jdeveloper/system11.1.1.3.37.56.60/o.j2ee/drs/easygestionV2.0/ViewControllerWebApp.war
*[11:00:48 PM] Wrote Web Application Module to /home/david/.jdeveloper/system11.1.1.3.37.56.60/o.j2ee/drs/easygestionV2.0/ModelWebApp.war*
[11:00:48 PM] Wrote Enterprise Application Module to /home/david/.jdeveloper/system11.1.1.3.37.56.60/o.j2ee/drs/easygestionV2.0
[11:00:48 PM] Deploying Application...
<27 déc. 2010 23 h 00 CET> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application easygestionV2.0 is not versioned.>
<JpsDstCredential><setCredential> Impossible de migrer le dossier/la clé d'informations d'identification et de connexion ADF/anonymous#easygesprod. Raison : oracle.security.jps.service.credstore.CredentialAlreadyExistsException: JPS-01007: Les informations d'identification et de connexion avec la correspondance ADF et la clé anonymous#easygesprod existent déjà..
<TrinidadFilter><init>
java.lang.IllegalStateException: Application was not properly initialized at startup, could not find Factory: javax.faces.application.ApplicationFactory
     at javax.faces.FactoryFinder$FactoryManager.getFactory(FactoryFinder.java:725)
     at javax.faces.FactoryFinder.getFactory(FactoryFinder.java:239)
     at oracle.adfinternal.view.faces.util.rich.ConverterValidatorRegistrationUtils.register(ConverterValidatorRegistrationUtils.java:36)
     at oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator.init(RegistrationConfigurator.java:79)
     at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.init(GlobalConfiguratorImpl.java:400)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.init(RegistrationFilter.java:53)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.init(TrinidadFilterImpl.java:103)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.init(TrinidadFilter.java:54)
     at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:332)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:98)
     at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:59)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1867)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
How can i fix the model project to be deployed as an ADf library and not a webapp with the integrated weblogic server ? Because with me it doesn't do it by itself.
Thanks a lot for help

duplicate to Issue of deploying a fusion Web Application with integrated Weblogic server

Developing a web application in Dreamweaver,MySql and PHP

I have two questions:
1. Am developing a web application on a windows 7 platform.
I have an insertion form where I have to always eneter the geographical details for some one. I.e District, County, Sub County and village.
So what I want is to have these pre entered in the database before I revock this form such that when I select a certain village on the form, it automatyically displays its District, Subcounty and County in the following textfiled. This saves time than typing them manually all the time.
I need help on how to do this.
2. On the same form, I have a textfield for capturing date of Birth. I need help on to insert a calender in this field such that when some one clicks on it, a calender pops up and he selects the date which is then inserted in the text field other than tytping it manually.
Thank u.

1. Have a look here http://labs.adobe.com/technologies/spry/samples/data_region/DataSetMasterDetailSample.html
2. Have a look here http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&loc=en_us&extid=2137 022
I hope this helps.
Ben
PS For more support on these products go to the Spry Forum here http://forums.adobe.com/community/labs/spry

Can i deploy web application with WEB-INF as war and leave others as it is

i'm asked to deploy my web application with WEB-INF in a war and leave all the others as it is, but i'm getting error that "resource not found"
what shld i do?
this is the command i used to create war
jar cvf WEB-INF.war *.*
i entered this command from command prompt from the directory
c:/tomcat/webapps/myapplication/WEB-INF/>jar cvf WEB-INF.war *.*
please help!!!!!

can u please elaborate...because i need to speak about that to the manager who is asking me to do so. he will not listen to me until i explain with true reasons.

Question about Tutorial: Developing RIA Web Applications with Oracle ADF

Similar Messages

Maybe you are looking for