Questions about BPM 11gR1 on Amazon EC2

Hi,
I have started image ami-c241aaab (oracle-soa-bpm-11gr1-ps2-4.2-pub) on Amazon EC2, using a spot request.
When I terminate this image an start it again, using a spot request, a new EBS volume is created.
Is that right?
I am able to connect to it using Putty.
After the SOA suite is started I am able to connect to it locally (using telnet localhost 7001 for instance)
But I am not able to connect to it remotely
(I did add the following to my default security group
- tcp - 7001 - 7001 - 0.0.0.0/0)
What am I missing here?
see http://blogs.oracle.com/SOA/2009/10/soa_suite_on_ec2_-_draft.html?msgid=8295995&eid=3915339734&lid=2
and http://blogs.oracle.com/bpm/2010/06/bpm_11gr1_now_available_on_ama.html
Groeten,
HJH

Instances launched using Spot Requests can only be terminated and can't be restarted. For you to be able to restart the same instance you need to stop it not terminate it. This is only possible if you launch it normally (not a spot request)
As for your inability to connect to the WebLogic server remotely, if you are behind a corporate firewall, ensure that port 7001 for http/https is allowed. Other than that there is nothing that occurs to me since you seem to have setup your security group properly, at least for port 7001. So you should be able to access Enterprise Manager and WebLogic Console. For other applications, you also need to add ports 8001 and 8888 and 1521.

Similar Messages

Question about BPM

Hi gurus
I want to create RFC Scenario using BPM; for it, I'm following the steps that are detailed in blog: /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
Is there another blog that it detailed an equal scenario but using SOAP Adapter instead of File Adapter????
Is there special configuration for SOAP Adapter?
Regards

Javier,
Check this weblogs on SOAP and try out which fits to your requirements:
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
/people/sriram.vasudevan3/blog/2005/03/18/points-to-ponder-over-while-considering-webservices-implementations-vis-a-vis-eai
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1442 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
/people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client
/people/kausik.medavarapu/blog/2005/12/29/csv-file-lookup-with-http-request-and-response-in-xi
/people/thomas.jung3/blog/2005/06/05/web-services-the-case-of-the-missing-soap-action-header
/people/thomas.jung3/blog/2005/05/13/calling-webservices-from-abap-via-https
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
/people/community.user/blog/2006/09/19/xi-webservice-studio--a-plain-jane-soap-tool
/people/community.user/blog/2006/10/24/exposing-bapi-as-web-services-through-sap-xi
/people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function
---Satish

Question about BPM Merge

Im working on SAP XI 3.0 and I tried to make a Merge with a Business Process.
Im gathering many incoming messages with the same schema in a container in BP and after some time interval without new message Im merging these messages in one with Multiple Mapping.
In this Mapping Inbound is my Multiple container and outbound is normal (not Multiple).
Interface Mapping is defined for Inbound Interface (from 0 to unbounded occurrence) and for Outbound only 1 occurrence.
When Im testing that scenario with more then 1 files for exp. 3 Im receiving after mapping transformation in BP 3 Outbound files instead of one in fast at the same time.
Can someone help me with advise?
Regards
Naycho

t

Can I Manage virtual machines using SCCM? What about Amazon ec2 instances?

Hi All,
As part of my lab environment, I would like to discover and manage virtual machines within ESXi platform and a few on Hyper-V. As part of this,
1] Do we need SC-VMM to create/discover/manage virtual machines or can this be done by using just SCCM 2012 module?
2] Does SCCM provide any connectors to public cloud services (ex: Amazon EC2 or Google Cloud services)? Can this be done using SCCM?
Any help on this would be appreciated. thanks

Thanks Jason.
A few follow up questions just to make sure I understand you correctly:
a] Statement: I understand SCCM can manage OS within any VM (I just realized my set up has discovered 2 VM's running Win 2008 OS via AD discovery method). My confusion began after going thru SC-VMM docs. I assumed, once you have SC-VMM set up, it will discover/manage
either ESXi servers or Citrix or other vendor hypervisors and then discover VM's within the hypervisors. But as you said, SCCM can manage OS within any VM.
b] Q: my sccm set up is part of domain 'A' and its discovering systems/users as part of domain 'A'. Is there a way to discover systems as part of domain 'B'? When I look into 'discovery methods' -> Active directory system discovery -> Add a new container
-> path -> select a new container -> it selects only domain 'A'
As a result I'm not able to add a secondary domain for system discovery. IS this how its supposed to be? Discovery runs only within one domain? (or) am I missing something here?
c] When you said 'Yes, I do think (I'm not familiar with all things VMM though) that there is a connector to EC2', did you mean a connector from SCCM or a connector from VMM component?
thanks again for all the help.

Oracle BPM 11gR1 Patchset 2 AWS

I was working with the Oracle BPM 11gR1 Patchset 2 that was created by Oracle on the Amazon Wed Service (AWS) cloud. I have it installed and everything is working. Howerver, because it is a image that was created by Oracle, what are the passwords for the console, em, bam, bpm that was created?
Information:
US East AMI ID: ami-c241aaab
AMI Manifest: 083342568607/oracle-soa-bpm-11gr1-ps2-4.2-pub
License: Public
The new Oracle BPM 11gR1, including the latest Oracle SOA Suite 11gR1 Patchset-2 is now available as an Amazon Machine Image (AMI). This is a fully configured image which requires absolutely no installation and lets you get hands on experience with the software within minutes. This image has all the required software installed and configured and includes the following:
Oracle 11g Database Standard Edition
Oracle SOA Suite 11gR1 Patch-set 2
Oracle BPM 11gR1
Oracle Webcenter with BPM Process Spaces
Oracle Universal Content Management
Oracle JDeveloper with SOA and BPM plugins
What was the usernames/passwords for all the parts?
The README file states to ask any questions about the image in the SOA forum
Refernce Link: http://www.oracle.com/technetwork/topics/cloud/whatsnew/index.html (Bottom of page)

I found the following web site that can help. The password for everything is welcome1
http://blogs.oracle.com/bpm/2010/06/bpm_11gr1_now_available_on_ama.html

ASM installation on RHEL 6.4 in Amazon EC2

I thought I'd perform an installation of 12cR1 to do a little testing. So I launched a new instance in Amazon EC2 and picked an AMI for 64-bit RHEL 6.4.
All started smoothly, but I've got stuck preparing a disk for ASM.
My first plan was to install ASMLIB. I see from the documentation that I need kmod-oracleasm (kmod-oracleasm-2.0.6.rh1-2.el6.x86_64.rpm), and that this is in the RHEL supplementary channel.
$ yum repolist all
Loaded plugins: amazon-id, refresh-packagekit, rhui-lb, security
repo id                                            repo name                                                          status
rhel-source                                        Red Hat Enterprise Linux 6Server - x86_64 - Source                 disabled
rhel-source-beta                                   Red Hat Enterprise Linux 6Server Beta - x86_64 - Source            disabled
rhui-REGION-client-config-server-6                 Red Hat Update Infrastructure 2.0 Client Configuration Server 6    enabled:      3
rhui-REGION-rhel-server-releases                   Red Hat Enterprise Linux Server 6 (RPMs)                           enabled: 10,994
rhui-REGION-rhel-server-releases-optional          Red Hat Enterprise Linux Server 6 Optional (RPMs)                  enabled: 6,250
rhui-REGION-rhel-server-releases-optional-source   Red Hat Enterprise Linux Server 6 Optional (SRPMs)                 disabled
rhui-REGION-rhel-server-releases-source            Red Hat Enterprise Linux Server 6 (SRPMs)                          disabled
repolist: 17,247
$ rhn-channel --add --channel=rhel-x86_64-server-supplementary-6
Username:
^C
Does Amazon EC2 provide the RHEL supplementary channel, and if so what credentials do I need to provide? Otherwise I guess I would need my own RHN subscription, which seems expensive for a self-learning instance.
So my second plan was to avoid ASMLIB and implement udev rules.
I created a 64GiB volume and attached it to the instance as /dev/sdh. On the instance it appears as /dev/xvdl:
$ fdisk -l /dev/xvdl
Disk /dev/xvdl: 68.7 GB, 68719476736 bytes
255 heads, 63 sectors/track, 8354 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xf4c9fedb
    Device Boot      Start         End      Blocks   Id System
/dev/xvdl1               1        8354    67103473+ 83 Linux
$ sudo scsi_id -g -u -d /dev/xvdl
$
So scsi_id doesn't return a value to use in the udev rule. I've found references to this which suggest setting disk.EnableUUID. Is this option available in Amazon EC2 at all? Or is there an alternative way of getting a UUID for the disk?
Any help with these questions, or suggestions for alternative solutions, would be much appreciated.
Thanks
Mike

Did you try this command ?
~]# blkid
/dev/vda1: UUID="7fa9c421-0054-4555-b0ca-b470a97a3d84" TYPE="ext4"
/dev/vda2: UUID="7IvYzk-TnnK-oPjf-ipdD-cofz-DXaJ-gPdgBW" TYPE="LVM2_member"
/dev/mapper/vg_kvm-lv_root: UUID="a07b967c-71a0-4925-ab02-aebcad2ae824" TYPE="ext4"
/dev/mapper/vg_kvm-lv_swap: UUID="d7ef54ca-9c41-4de4-ac1b-4193b0c1ddb6" TYPE="swap"
https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/s2-sysinfo-filesyste…

Question About FireWire 800 port

With the coming of these new Firewire ports I have a question about using my FireStudio Project, It uses normal Firewire, now will I need to buy a Adaptor, or does apple even make one?? Will this still work, I don't get why they had to change it anyway, I mean I know it's faster, but now it's just more adaptors I have to buy, that is if they even make one.
Message was edited by: Anthony82
null

There are plenty of adapters and cables out there. They're not that expensive ($5-$30). You can get a 9 pin to 6 pin firewire adapter and use whatever cable you used before. You could also get a 6 pin to 9 pin adapter. Do a search on amazon or your favorite electronics store, and you'll find plenty. Here's what Apple sells:
http://store.apple.com/us/product/TP320LL/A?mco=NDc4NjQ5OA

Oracle 10xe on Amazon EC2 - pricing

Hello
I want to try creating an Oracle 10gXE on the Amazon EC2 for proof of concept, which means I need it to be free or close to
I've created my Amazon EC2 setup, and checked the pricing which i believe is close to 0 as long as the load is very little
Now I want to create my Oracle 10gXE database using the provided AMI, but I'm not sure about the pricing.
Do you now if I will be charged anything from Oracle doing this, and if so, how much?
And how much will this setup impact my EC2 usages, hence how much will Amazon charge me for doing the POC?
I only need ballpark figures, but as mentioned I only have been given a small budget to do a proof of concept on this setup, so it's important to me that I don't go over budget
Best regards
Klaus

Oracle 10gXE is free, Oracle does not charge you any fees.
To start with Amazon, you can have a free EC2 Micro instance which is suitable for Oracle 10gXE. Amazon offers this instance for new customer as free and i think it's for one year.
You safe if you use 10gXE and AWS Micro instance.

Questions about DAO

Hi,
we have some questions about DAO, Someone knows the answers?
In versión 10g, one could create DAOs (Data Access Objects) from DB and then they could use them for extract and store data.
In BPM 11g, how one could store information in the DB? How can they integrate them?
Thanks in advance
Antonio

In 11g Database Adapters are used for direct access to the database. You add a DB adapter reference to your composite then this gets exposed as a service that can be invoked from the BPMN/BPEL process.
Some documentation can be found here:
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10231/adptr_db.htm#BGBBHJGC

Deploy ADF Fusion Web Application on Amazon EC2 Weblogic

Hi,
I am trying to deploy ADF Fusion Web Application (developed using JDev) on Amazon EC2 Weblogic app server but with no success.
Can anyone enlighten me how to deploy ADF Fusion Web App on Amazon EC2 Weblogic?
Thanks for kind assistance!

Hi,
Thanks for your prompt assistance.
I managed to run "wls_jumpstart" but I am unable to start the console even though I have created a domain.
I cannot find any instructions anywhere about deploying ADF Fusion Web Apps on Amazon EC2 Weblogic or any case studies of success anywhere.
Hence, I am not sure if ADF Runtime is available on the Weblogic on Amazon EC2. Can you please help me in this area as well?
It will be great if you can point me to some instructions on how to load web apps to Amazon EC2 Weblogic as I am quite new to both JDev and Amazon EC2.
Thanks.

How to run a Lync Server 2013 in amazon ec2 Instance ?

Hi Friends,
I would like to install a Lync server 2013 in amazon ec2 instance. Let me know can i install Active Directory server, Lync Server 2013 and Media server in a single amazon instance ?. If it possible how can i do it ?. And is any other features need to install
to get the fully functional Lync server. Please help me am newbie in Lync environment

You can get Lync working in EC2 and I have lab'd his many times. Having said that the process isn't that straight forward (especially if you plan to do voice) a lot of planning and testing, specifically of the network would need to be undertaken.
You can add multiple interfaces to an EC2 instance (see here http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-eni.html)
If you're hard set on using EC2 you can get it to work, but I personally would look at Office 365 E4 or a small on-premise deployment depending on your requirements.
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

* Buying Vado HD - 1st or 2nd gen? and question about pricing *

Hi.
I want to buy the Vado HD. I'm deliberating between the st and the 2nd gen. Can you help me with that?
Second question, how come the 2nd gen (that supposed to be better and newer) costs less than the st gen?! (99$ for the 2nd gen and 229$ for the st gen).
Thanks,
Adam

CRe: * Buying Vado HD - st or 2nd gen? and question about pricing *# To me the Vado Rev3 seems to be trying to get the same feature set as a digial Camera with HD recording capabilty....except the cameras take better stills. I have the below Canon and the Vado HD Rev.
http://www.amazon.com/Canon-PowerShot-SD780IS2--Stabilized-Black/dp/B00SER47Y
We don't use the vado anymore since the camera is always with us.
Factor into the price of the Canon also purchasing a highspeed 6GB sd card.
if you are really sold on a Vado...look at the comparison here:
http://www.myvado.com/products/comparison.aspx
Note how they reduced the recording time of the new models to only 4gb instead of 8gb.....however, the newer units nati'vely record to MP4 which is a little easier on some software programs than the AVI container.

Techie Question about iWeb, outbound links, and Google Analytics

Hi,
I have a kind of pretty technical question about using Google Analytics (GA) with iWeb sites to measure clicks on outbound links. Here's the setup:
1) My website's online, and GA is working properly.
2) I don't sell stuff directly, but I do have a "Purchase" page which contains a link to a specific Amazon page.
3) I'm pretty sure I can measure how many people go to the Purchase page using GA, but how do I measure whether visitors click on the Amazon link? It would be interesting to me to be able to gauge what the conversion rate is; that is, how many people actually proceed to purchase the product at Amazon.
I've checked the GA instructions and there's a page about manually tracking clicks on outbound links but it requires some code inputting. I know zero about coding, but I'm pretty sure that in iWeb you can't get access to the source code to input the required code.
Am I wrong about this? And if I am, then does anyone here know how to measure the clickthrough rate?
Anyway, hope you can help. Thanks in advance.

I don't know about the link tracking but you could have the link take you to a redirect page which automatically sends them to Amazon.com after a preset time, 0 seconds to whatever you'd like. You can put a counter on that redirect page, like StatCounter. StatCounter can tell you how many, from where they came, i.e country and area, repeat visits, etc.
Tutorials #12 & #13 describe how to put a visible counter on a page but with a redirect page you wouldn't have to bother since it wouldn't be seen. You can get all of your information from your account on the StatCounter site.
The redirect page would be a simple plain text page titled redirect.html and would look like this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="refresh"
content="0; Destination URL">
<title>Redirecting or whatever you'd like to appear at the top of the browser</title>
</head>
<body>
</body>
</html>
0 Is the number of seconds to wait before redirecting the visitor. If set to zero the visitor would not know they were being redirected. Replace Destination URL with the Amazon URL you want them to go to.
OT

Questions about your new HP Products? HP Expert Day: January 14th, 2015

Thank you for coming to Expert Day! The event has now concluded.
To find out about future events, please visit this page.
On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us. We hope you will return to the boards to share your experiences, both good and bad.
We will be holding more of these Expert Days on different topics in the months to come. We hope to see you then!
If you still have questions to ask, feel free to post them on the Forum – we always have experts online to help you out.
So, what is HP Expert Day?
Expert Day is an online event when HP employees join our Support Forums to answer questions about your HP products. And it’s FREE.
Ok, how do I get started?
It’s easy. Come out to the HP Support Forums, post your question, and wait for a response! We’ll have experts online covering our Notebook boards, Desktop boards, Tablet boards, and Printer and all-in-one boards.
We’ll also be covering the commercial products on the HP Enterprise Business Community. We’ll have experts online covering select boards on the Printing and Digital Imaging and Desktops and Workstations categories.
What if I need more information?
For more information and a complete schedule of previous events, check out this post on the forums.
Is Expert Day an English-only event?
No. This time we’ll have experts and volunteers online across the globe, answering questions on the English, Simplified Chinese, and Korean forums. Here’s the information:
Enterprise Business Forum: January 14th 7:00am to 12:00pm and 6:00pm to 11:00pm Pacific Time
Korean Forum: January 15th 10am to 6pm Korea Time
Simplified Chinese Forum: January 15th 10am to 6pm China Time
Looking forward to seeing you on January 14th!
I am an HP employee.

My HP, purchased in June 2012, died on Saturday. I was working in recently installed Photoshop, walked away from my computer to answer the phone and when I came back the screen was blank. When I turned it on, I got a Windows Error Recovery message. The computer was locked and wouldn't let me move the arrow keys up or down and hitting f8 didn't do anything.
I'm not happy with HP. Any suggestions?

Have questions about your Creative Cloud or Subscription Membership?

You can find answers to several questions regarding membership to our subscription services. Please see Membership troubleshooting | Creative Cloud - http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html for additional information. You can find information on such topics as:
I need help completeing my new purchase or upgrade.
I want to change the credit card on my account.
I have a question about my membership price or statement charges.
I want to change my membership: upgrade, renew, or restart.
I want to cancel my membership.
How do I access my account information or change update notifications?

Branching to new discussion.
Christym16625842 you are welcome to utilize the process listed in Creative Cloud Help | Install, update, or uninstall apps to install and evaluate the applications included with a Creative Cloud Membership. The software is fully supported on recent Mac computers. You can find the system requirements for the Creative Cloud at System requirements | Creative Cloud.

Questions about BPM 11gR1 on Amazon EC2

Similar Messages

Maybe you are looking for