Questions on working in real time

Hi. Just have a couple of questions about working in real time, actually on the swf.
Firstly, I want to create a sort of drag and drop interface. Is it possible to have one stage act as two seperate stages? By this, I mean is it possible to have the left hand side of my stage hold all the components, they get dragged to the right hand side of the stage and placed anywhere, the user can then click save, and only the right hand side of the stage is saved?
Secondly, I am testing a few things out. What would I do to get a type of free transform on an image on the stage in real time, in the swf? So once the movie is played, the user could then resize any image how they like by dragging a corner of the image..
Cheers for any advise.

What I would like is the movie to display to the user. When they see the movie, it looks like the screen is split in two. On the left hand side of the screen will be the components which can be dragged and dropped. The right hand side of the screen will be a birthday card, whereby the users can drop and drag components to personalise the card. I then want the user to be able to save the card, but a normal save will save the whole screen, including the components side of the screen. All I want is the right hand side of the screen saved, where their card has been created. Would this be done with two movies, and communication between the two. Or is this possible to do on just one stage?

Similar Messages

InDesign auto-size frame feature not working in real time in InCopy why?

We have just recently migrated from InCopy CS4 to CS6 to take advantage of the new features like the auto resize frame option, however it now seems that this feature is not working in real-time.
Basically the steps are needed to be complete before it auto-resizes the frame in InCopy, we use both layout and assignment based workflows:
1. From an ID document ('doc1'), exported a 'layer' to IC, certain frames are set to auto-size in height using the text frame options. So that editorial can review and make changes to text and the frame should resize according to the specifications set. IC stories are saved to a folder located in a content folder inside the top issue working folder.
2. Editorial opens the IC software, then opens the ID 'doc1'. Check’s out correct .icml file and makes edits to frame with auto resize.
3. Frame does not resize according to text frame set options and InCopy file does not respond in same fashion as InDesign.
4. Change only occurs when InCopy file is closed and updated in InDesign, which is frustrating as this feature would save huge amounts of time serving editorial requests.
Has anybody experienced this type of workflow problem? If anyone can provide mw with some pointers as to what can I do to get this to update in real time perhaps run a script? Update file in InCopy and refresh I will very much appreciate their assistance. I have run out of ideas.
Thanks!

We've had all sorts of problems with this feature as it should've worked straight out of the box but after some testing we have found that its something to do with the way you open the actual file in InCopy. Which is far from ideal and should have been UAT by Adobe before release.
This will not work consistently work if you open the designed .indd or .icma file in InCopy using the file open command within the application.
If you need this to work, the InCopy user has to open the .indd or .icma file by dragging and droping from OS windows explorer into InCopy, we use Windows 7 acrros all the teams. Check out .icml files add text changes to the set auto resized frames, this process will expand/collapse the frames to fit the content but as you have to use the drag and drop method to open the .indd and .icma file, 2 users cannot access the same time doc at the same time (a serious flaw in the programming architecture!) which stops people working in parallel. Save changes, check in .icml content and close .indd or .icma.
However the flaw comes in if you then open the .indd and .icma file in InCopy using the file open command within the application, before an InDesign user opens and saves the file (updates the design). The corrections added in the previous stage above, will not show the frames expanded/collapsed to take in the added text and instead show over matter???? The only way around this is to ask an InDesign user to open, update and save the design that way the InCopy user will see the same result no matter what file open method they use.
Another suggestion is to design the page to have some of the auto resize frames anchored within main body of text and that way the frames will expland/collapse when checking out and editing the content. However, this does cause issues with InDesign crashing etc. so we have tried to stop this method within the working group.
Have you experienced other more serious issues with InDesign crashing consistently when re-importing .icml files? See other forums here:
http://forums.adobe.com/thread/671820?start=80&tstart=0
http://forums.adobe.com/message/5045608#5045608
As far as we can see this is a major flaw in how the application(s) work, we have an enterprise agreement with Adobe and purchase a large volume of Adobe products globally but so far the technical support team are unable to find a solution to this and I'm not hopeful of any resolution soon even with the new release of Adobe CC.

MY IMOVIE IS VERY SLOW, I CANT WORK IN REAL TIME WHEN I PLAY MY PROJECT

WHAT HAPPEN WHITH IMOVIE?
I CAN'T WORK IN REAL TIME MY PROJECT, THE CLIPS , THE TRANSITIONS, EVERYTHING IS VERY SLOW.
PLEASE I NEED HELP URGENT. I HAVE TO PRESENT A WORK FOR THIS MONDAY, AND I TRUSTED IN IMOVIE UNTIL TODAY.
UUURGENT!!

Hi
What Mac OS are You using - Mac OS X.0.? - I doubt
What version of iMovie ?
Free space on Start-Up (Mac OS) Hard Disk - How much ?
What material did You feed iMovie ? Interlaced SD-Video, HD or what ?
Yours Bengt W

What are the main parts in ABAP Programing to work in Real Time ?

Hi
I would like to know hat are the main/important parts in ABAP Programing to work in real time environment.
Moderator message : Search for available information. Thread locked.
Edited by: Vinod Kumar on Aug 1, 2011 9:50 AM

Hi Ashok,
There are so many programming parts such as Function modules, report programs, workflows, smartforms, webdynpro, adobe forms, scripts etc.
In which context you want answer can you please tell ?
Regards,
Aabha

Since I updated to ios7 my virtual keyboard doesn't work in real time.

Any suggestions on how to fix this problem? My unlock keyboard also has a several second delay before it registers the numbers I have entered.

Heard of a few people getting this. Usually resetting helps.
(Hold the hold button and home button together for 10 or so seconds until you see apple logo)
Do that a few times.
If it doesn't work, then:
iOS: How to back up and restore your content

The counter on ebay doesn't work in real time.

That's pretty much it in one sentence. I just rebuilt my system. Do I just need to get a newer version? I'm running windows 7 now too.
Thanks

I have had the same problem repeatedly - the forums are filled with similar comments - there is clearly a problem and it would appear Verizon doesn't care enough to fix it.
frankenheim wrote:
I've set Do not Disturb schedule several times over the week. Also had discussion with tech support verifying I was doing everything correctly. The system will not stay with the schedule for the day. It simply blocks all incoming calls when its activated, 24 hours.
I had set it to block 7-9am daily but when you check call log it clearly shows calls blocked all day.
I've seen this same issue with others on the community chat site, so there is clearly a system error issue.
Please let someone at Verizon that can fix this issue know about the problem.

How can I improve the speed of my VI to work in real-time at higher sample rates?

I am currently trying to implement a multi-channel control system, the vi of which is attached. It effectively consists of a number of additions and multiplications in the processing subvi (also attached), however, for 7 inputs and 7 outputs I cannot get it to work at sample rates higher than 3kHz without experiencing an overwrite error. Does anyone have any tips as to how I can get the processing to work more efficiently such that I can get it to work at higher sample rates?
Attachments:
Simul_AIAO_Buffer(Two_Boards)_control_FXLMS_for_1_leaky_no_SCXI.vi ‏128 KB
FXLMSsub_leak_v2.vi ‏70 KB
filtered_ref_1_chan.vi ‏39 KB

Hi mattwilko,
I believe the first issue that you should address is the building of arrays.
This is mainly happening on the edge of your loops.
This is my reasoning.
Allocating memory in RT to handle an array that is growing will blow away your determinism.
I would suggets pre-allocating all of your storage and work with the data in-place.
In LV 7.1 there are some great new tools that will help nail down issue of this type.
If you have LV 7.1 you may want to upgrade so you can take advantage of the new tools.
Trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q with a real time mode but it is not working but when i run it with uploading it into the PXI it save in to the file

Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
Attachments:
PWMs.vi ‏130 KB

other problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2

ORACLE 11G "real time apply" not work?????

we have a database original on ORACLE 10.2.0.4 and we upgrade it to 11.1.0.7.
after that we create standby database and tried to use "real time apply" feature.
Primary database can transfer log files to standby database and standby database also can apply logs. The problem is it can NOT work on "real time apply".
Ant ideal what wrong?
=== procedures ====== (standby database)
SQL> startup mount;
ORACLE instance started.
Total System Global Area 2087780352 bytes
Fixed Size 2161272 bytes
Variable Size 1795163528 bytes
Database Buffers 251658240 bytes
Redo Buffers 38797312 bytes
Database mounted.
SQL> alter database open read only;
Database altered.
SQL> alter database recover managed standby database using current logfile disconnect;
Database altered.
SQL> select PROTECTION_MODE, PROTECTION_LEVEL, DATABASE_ROLE, SWITCHOVER_STATUS, OPEN_MODE, GUARD_STATUS from v$database;
PROTECTION_MODE PROTECTION_LEVEL DATABASE_ROLE SWITCHOVER_STATUS
OPEN_MODE GUARD_S
MAXIMUM PERFORMANCE MAXIMUM PERFORMANCE PHYSICAL STANDBY NOT ALLOWED
MOUNTED NONE
SQL> select process, status from v$managed_standby;
PROCESS STATUS
ARCH CONNECTED
ARCH CONNECTED
ARCH CONNECTED
ARCH CONNECTED
RFS IDLE
MRP0 APPLYING_LOG
6 rows selected.
========== Primary database init.ora file setup =====
### for DG use
db_unique_name = DBPMY
log_archive_config='dg_config=(DBPMY,DBSBY)'
log_archive_dest_1='LOCATION=/Archive/DBPMY/arch/arch MANDATORY'
log_archive_dest_2='service=DBSBY valid_for=(online_logfiles,primary_role) db_unique_name=DBSBY LGWR ASYNC=20480 OPTIONAL REOPEN=15 NET_TIMEOUT=30'
*.log_archive_format='DBPMY_%r_%t_%s.arc'
log_archive_dest_state_1 = enable
log_archive_dest_state_2 = enable

There are a couple of things to look at.
1. Real time apply requires standby redo logs on the standby database. On the standby database run this query:
SELECT * FROM v$logfile where type = 'STANDBY';
if you get 0 rows back you'll need to create standby logfiles
The general guideline is to size them exactly like your redo logs but add one additional standby log to ensure it doesn't cause a bottleneck.
2. Get the size of your logfiles:
SELECT GROUP#, BYTES FROM V$LOG;
3. For example if you have 3 redo logs that are 50 MB in size, create 4 standby redo logs 50 MB each and don't multiplex them.
ALTER DATABASE ADD STANDBY LOGFILE ('/Archive/DBSBY/onlinelog/slog1.rdo') SIZE 50M;
ALTER DATABASE ADD STANDBY LOGFILE ('/Archive/DBSBY/onlinelog/slog2.rdo') SIZE 50M;
ALTER DATABASE ADD STANDBY LOGFILE ('/Archive/DBSBY/onlinelog/slog3.rdo') SIZE 50M;
ALTER DATABASE ADD STANDBY LOGFILE ('/Archive/DBSBY/onlinelog/slog4.rdo') SIZE 50M;
4. Cancel recovery on standby
recover managed standby database cancel;
5. Restart recovery using real time apply
recover managed standby database using current logfile disconnect;
6. To validate that real time is working you can check a few places.
-It will say in the database alert log on standby that it's using real time apply
OR
-Check primary
SELECT status, recovery_mode FROM v$archive_dest_status where dest_name = 'LOG_ARCHIVE_DEST_2';
If the recovery_mode is "MANAGED REAL TIME APPLY" then real time apply is working, if it's anything else then we'll need to check more things.
NOTE that if you are going to allow your current primary to switch roles and become a standby then you'll want to create standby redo logs on primary as well
Sometimes recovery gets "stuck" and simply resetting the destination parameters can resolve it:
alter system set log_archive_dest_2='service=DBSBY valid_for=(online_logfiles,primary_role) db_unique_name=DBSBY LGWR ASYNC=20480 OPTIONAL REOPEN=15 NET_TIMEOUT=30';
There are some other things we can check next but let's start with the easiest fixes first.

Show front panel of subVI on a real-time target

Hi,
I'm running an application on a real-time target (14.00). On the main front panel of the application, I have a button who open another VI with the invoke node method but this component doesn't work with Real-Time taget. So, how can I show the front panel without this method ?
Thank you

Hint: RT = there should be no GUI.
RT applications are meant to just run off on their own. GUI is not part of a real RT system since that adds a non-deterministic process to the system, adding jitter (which is a big no-no in RT). What you should be doing is making a Windows host application that can communicate with the RT system (via Network Streams, TCP/IP, etc). The host application acts as the GUI/HMI.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How do i use multiple threads( very much real time), using JavaFX?

I'm creating an application, using JavaFX because one can create awesome GUI using JavaFX. I need to know how to create real time multiple threads using javafx.
JavaFX doesn't support creation of multiple threads, but i think there is another way of doing it. I need it work in real time as my application works with an hardware (wacom intous 3 tablet), and i need mutiple threads to get all the parameters from the stylus of the tablet simultaneously...
any code which will help me out or explaination on how to go about this is appreciated...
Help required quickly...

See example at
[http://jfxstudio.wordpress.com/2009/06/09/asynchronous-operations-in-javafx/|http://jfxstudio.wordpress.com/2009/06/09/asynchronous-operations-in-javafx/]

XML file issue real time

Hi guys,
My question is in a real time scenario how the file is asked for ?
As for testing a simple file scenario we usually get the sample file in XI from Message mapping tool only, this sample file contains primary tag of message type with attribute of namespace : <b><ns0:MT_FILE_INPUT xmlns:ns0="http://bsptrng.file2file"> </b> "
<ns0:MT_FILE_INPUT xmlns:ns0="http://bsptrng.file2file">
   <Record>
      <Row>
         <FirstName>q</FirstName>
         <LastName>R</LastName>
         <MiddleName>S</MiddleName>
         <City>Dehradun</City>
       </Row>
   </Record>
</ns0:MT_FILE_INPUT>
but when a client will provide us a file it will be a simple xml file like...
<Record>
      <Row>
         <FirstName>q</FirstName>
         <LastName>R</LastName>
         <MiddleName>S</MiddleName>
         <City>Dehradun</City>
       </Row>
   </Record>
As you can see primary tag of Message type with namespace will be missing...
because of that mapping exception is thrown in pipeline service....
<b>My question is how to tackle this ...</b>
Regards,

Why you can not create XSD with the client specification?
Like This:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
     <xs:element name="City">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="Dehradun"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="FirstName">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="q"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="LastName">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="R"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="MiddleName">
          <xs:simpleType>
               <xs:restriction base="xs:string">
                    <xs:enumeration value="S"/>
               </xs:restriction>
          </xs:simpleType>
     </xs:element>
     <xs:element name="Record">
          <xs:complexType>
               <xs:sequence>
                    <xs:element name="Row" type="RowType"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:complexType name="RowType">
          <xs:sequence>
               <xs:element ref="FirstName"/>
               <xs:element ref="LastName"/>
               <xs:element ref="MiddleName"/>
               <xs:element ref="City"/>
          </xs:sequence>
     </xs:complexType>
</xs:schema>
Regards.
Message was edited by:
        Iñaki Vila

[Solved] QJackCtl won't start in with real time.

Hey all,
I'm having a problem with QJackCtl, I got my version from Extra. The problem is that for some reason Jack won't start in real time mode using QJackCtl. Real Time is checked and marked under the set-up tab, but that little piece of info doesn't seem to make it to jackd. If I start Jack through CLI it works with real time, but not from the GUI.
I figured this out by starting JACK from the command line and then starting QJack. When I would do that it would be running in real time just without the rest of my settings (buffer,periods,sampling rate, etc). So in my head there's an issue with QJackCtl. I've tried to find a solution, but I can't seem to find one. This isn't the first time I've set JACK up on a system, but this is the first time I've had this problem.
The rest of the system is set up and ready to go. Rt Kernel, limits.conf and all other tuning is done.
Is there something I missed when setting this piece of software up? Any ideas?
Solved Edit:
Okay, so right after I posted this I got a crazy idea. When you enter setup in qjackctl on the first page there's a box for server path. The path defaults to "jackd". On that line I added "--realtime", so it looked like a basic CLI start-up of JACK and now it works!
So, if anyone else has this problem go to the Setup tab, in the setup window on the line that says Server Path it should look like this:
jackd --realtime
It worked for me and I hope it helps somebody else out.
Last edited by Zen:Core (2010-04-03 21:41:52)

Which volume? Assuming you're on the most common usecase (single hw audio device) then whatever command line you use (amixer for example) it'll work fine, it'll control the volume of the device rather than the pulseaudio plugin (so other playing apps get affected as well, which is probably what you want). The 'global' volume so to speak.
For multiple hw audio devices it gets tricky though.

Real time ROLAP or Automatic molap cubecube does not update the value

Hello Everyone,
I am working with Real time Rolap and Automatic MOLAP cube. I had created cube using AdventureWorks DW sample given by Microsoft Tutorial. when i fire insert query, It updates data. It works fine in both the cases after reconnecting in SSMS and SSAS browser.
But I have a one database table in SQL server with 4 varchar and 10 numeric fields [simple table with one primary key without any relationship with other table]. I tried to create both type of cube from direct database table [selecting varchar fields as
dimensions and numeric as measures], created partitions, specified server side tracking table. It processes the cube. but when i add rows into this table. It inserts record but does not update in SSAS browser or SSMS browser.
Please help me what is the problem???
Thanks in Advance!

I noticed the same behavior reported by Bob: Not regarding the "process filter" or the "update frequency" selected "CPU Time" column is only updated when details dialog is open. I noticed it just today (which triggered the search here), I wonder if this "feature" has been always present or maybe activity monitor is getting lazy?
Regards,
Mauro

Real Time Java

Hi. I am required to design a Real Time project using Real Time Java. The problem is that I have no idea what I can do in the time allocated (two weeks).
Anybody have any idea what could be interesting to do, or have pointers where to look?
Thanks
Eric
P.S Sorry if there's a Real Time Forum.

Ouch.
In a real time system, you absolutely positively must have certain events happen at specific moments in time, regardless of what else the CPU might be doing.
To use a poorly timed example, a rocket booster on the space shuttle must ignite its engine exactly five minutes, three seconds after take off - even if the computer is busy processing the latest SETI data. In other words, time based pre-emptive multitasking.
The closest you can come to it is using threads to start and suspend tasks according to the system clock. So for something codeable in two weeks...
Look on the web for two suitable compute-intensive mathematical algorthims. RSA key generation would be one.
Put each algorithm into its own thread. Add a third thread that explictly saves the current system time to a file every five minutes. So I would see something like...
Thursday April 03 2003 13:22:05
Thursday April 03 2003 13:27:23
Thursday April 03 2003 13:32:18
As the output. Notice the variation in seconds. If you did it right and it works in real time, there should be no variation - it saves at 05 seconds on the dot each and every time.
If you want more suggestions or advice, I suggest asking over on the "advanced language topics" or "algorithms" boards. Do NOT cross-post!

Questions on working in real time

Similar Messages

Maybe you are looking for