Quick fade in effect for my some elements in my swf

is there a quick fade in effect available?

Hi,
I have read once again your post and watched the screenshot.
At the beginning I thought that you used "Fade In" effects in FCP, but I see that it was in LiveType.
So, as I understand, after rendering you imported this animated text to FCP - and you've got not good results (each letter appears briefly as black before becoming white as it's fully faded in.)
Don't change anything with this text in LiveType, don't remove shadow, its not needed. After importing it to FCP and placeing on Timeline, click the text and change in the Menu: "Modify / Alpha Type / Black" - render this fragment and watch. Now is OK?
(You can change this parameter also in a Viewer window - it will be changed for all uses you will need.)
Marek.

Similar Messages

  • Save for Web :: some elements are missing

    Hello,
    This is just to report a problem with "Save for Web" option. I have a logotype opened in illustrator, when "save for web" option and saving as PNG. Some of the elements in the illustrator file are missing. Here are a few screenshots to see what I'm talking about. Hope this helps to figure out what is going on.
    Thanks
    Piero
    Illustrator File. Vector logotype
    Wire frame to see that everything is vectors.
    Saving for web as PNG. You'll notice the three bars on top are missing.
    Saving for web as JPG. Same thing is happening. The three bars on top are missing even though is on the illustrator file.
    Let me know if you need something from me to correct this prob.

    Got it. Found it and yes, for some reason this was set to overprint.
    http://help.adobe.com/en_US/illustrator/cs/using/WS714a382cdf7d304e7e07d0100196cbc5f-6495a .html
    Thanks a lot!

  • Quickly Disable All Effects for Preview?

    I know this topic was posted more than a year ago but has any update happened since then to address this problem? I know there is a workaround by cutting up an adjustment layer above all your clips but its less than ideal. A global effects off switch can't be that hard can it?.

    There's no global effects on/off switch. PrPro is not architected in a way that would make that straightforward (mainly for the reasons peferling explained). We do have master clip effects now which would help you in cases where you'll have your effects applied to all sequence instances of the same source clip (like you might do with a color or lighting effect, among others). Otherwise, you'll just have to disable each effect individually or use the adjustment layer workaround. (I would to the latter personally, since that's a big part of what they're designed for)

  • [Tutorial]   Shadow Effects  for Photos & Web Elements

    Latest tutorial I've put up for simple shadow effects can be
    found here:
    http://www.sitepoint.com/forums/showthread.php?t=581074
    Nadia
    Adobe® Community Expert : Dreamweaver
    Unique CSS Templates |Tutorials |SEO Articles
    http://www.DreamweaverResources.com

    Nadia Perre *ACE* wrote:
    > Latest tutorial I've put up for simple shadow effects
    can be found here:
    >
    http://www.sitepoint.com/forums/showthread.php?t=581074
    Very nice, Nadia!
    Linda Rathgeber - Adobe Community Expert
    http://www.adobe.com/communities/experts/members/8.html

  • Transition stiyes for ALL muse elements and widgets

    Hi,
    When are you planning on introducing "Transition Styles" for ALL muse elements?
    By these I mean (at least): fade, vertical (top & bottom) and horizontal (left & right)
    Having them available for only some elements like slideshows keeps us designers from being as creative as possible, and it's 2014, we CAN'T have "dead" looking elements on our websites.
    By "Transition Styles" I mean:
    Page Transitions
    Button Transitions (regular and for menu widgets of course)
    PSD Button Transitions
    Target and TRIGGER transitions for compositions (this is important)
    Footer Transitions
    THIS WILL MAKE BOTH YOUR PRODUCT AND OUR FINAL DESIGNS LOOK LIVE AND CONTEMPORARY
    IMO transitions are an essential thing which gives a new dimension to every website. Without being able to control this, our designs will look static and "dead".
    P.S. I'm at the end of my trial and this is something of the highest importance to me (at least to know if it's coming in the near future) which will tip the balance for me to buy the 1yr subscription. I've thoroughly tested muse for the last 20 days and have came up with the conclusion that this is the only thing missing for me to be able to create website designs which can stand shoulder to shoulder with award winning website designs. Having Transition Styles available for ALL elements will give us designers such power and creative freedom to do things some of which even you couldn't anticipate.

    Hi Brad,
    Check out this website http://www.quazarwebdesign.com/
    You can see the site has won awards, was nominated for more and so on.
    Well, I've managet to re-create it from scratch in muse (without edge animate). I only found myself limited without the ability to assign transitions to ALL elements in muse. For instance, on the landing page you can see the Costa Rica Mobile Web Design section (with the astronaut etc.) And you can notice "WE INNOVATE", "WE PREPARE" and "WE LAUNCH" sections and how when you click on each of them, the content changes but the buttons also have a shape coming from above (vertical transition). I created that using Lightbox or Blank composition (can't remember ATM), used triggers (with inserted images) to act as "WE INNOVATE" etc. and light box areas to act as content with images and text. I then assigned vertical transition to the content and RIGHT THERE, all I needed to make it perfect was to be able to assign "Vertical Transition" to the TRIGGER. I hope you understand what I'm getting at.
    So, giving TRIGGERS their own transition styles, not just targets, doubles the dynamic effect possibilities of the website. And That's what made me come to conclusion that ALL muse elements should have a transition style option. It would let designers be comfortable and rely on that option always being there and would remove disadvantages of certain widgets and elements. For instance, I bet we all are craving for a menu bar with smoothly fading buttons and for pages swiping from the side or fading.
    Give us this, and I'll give you a worthy match to this CSS award winning website, but created entirely in muse and NO CODE WAS WRITTEN THAT DAY

  • 1. How do I add CSS effects to a certain element?

    How do I add CSS effects to a certain element?
    There are several effects (like customized hover effects) that I could with CSS. I want to know how do I add the CSS effects for a certain element/object from within Edge animate.

    The way to add css in general is
    sym.$('element').css({
    'Property':'value',
    'Property':'value',
    'Property':'value'

  • Problem With Fade Effect For JTextField

    Hello Friends !
    I am putting a 'bounty' of 10 Duke dollars
    for the clever clogs who can help me out !
    I want to create a 'fade in' effect when a
    textfield has the focus and a 'fade out'
    effect when it looses focus.
    The code for what I have done so far is
    listed below, but it leaves nasty 'artifacts'
    behind when painting.
    regards, Asad.
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class RunProgramAgain{
    public static void main(String[] args){
    JFrame frame = new MyFrame();
    class MyField extends JTextField{
    public MyField(){
    setPreferredSize(new Dimension(100, 30));
    public void paintComponent(Graphics g){
    super.paintComponent(g);
    if(hasFocus())
    fadeIn();
    else
    fadeOut();
    private synchronized void fadeIn(){
    for(alpha = MIN; alpha <= MAX; ++alpha)
    setBackground(new Color(RED, GREEN, BLUE, alpha));
    private synchronized void fadeOut(){
    for(alpha = MAX; alpha >= MIN; --alpha)
    setBackground(new Color(RED, GREEN, BLUE, alpha));
    private int alpha = MIN;
    private static final int MIN = 0;
    private static final int MAX = 10;
    private static final int RED = 0;
    private static final int GREEN = 255;
    private static final int BLUE = 0;
    class MyButton extends JButton{
    public MyButton(){
    super("Start");
    class MyFrame extends JFrame{
    public MyFrame(){
    setSize(new Dimension(300,250));
    getContentPane().setLayout(new FlowLayout());
    getContentPane().add(new MyButton());
    getContentPane().add(new MyField());
    show();
    }

    Played some more and came up with a class that will allow you to fade the background color of any JComponent:
    import java.awt.*;
    import java.awt.event.*;
    import java.util.Hashtable;
    import java.util.Vector;
    import javax.swing.*;
    public class Fader
         private static final int MIN = 0;
         private static final int MAX = 10;
         private Color fadeFrom;
         private Color fadeTo;
         private Hashtable backgroundColors = new Hashtable();
         **  The background of any Component added to this Fader
         **  will be set/reset to the fadeFrom color.
         public Fader(Color fadeTo, Color fadeFrom)
              this(fadeTo);
              this.fadeFrom = fadeFrom;
         **  The original background of any Component added to this Fader
         **  will be preserved.
         public Fader(Color fadeTo)
              this.fadeTo = fadeTo;
         **  Fading will be applied to this component on gained/lost focus
         public Fader add(JComponent component)
              //  Set background of all components to the fadeFrom color
              if (fadeFrom != null)
                   component.setBackground( fadeFrom );
              //  Get colors to be used for fading
              Vector colors = getColors( component.getBackground() );
              //     FaderTimer will apply colors to the component
              new FaderTimer( colors, component );
              return this;
         **  Get the colors used to fade this background
         private Vector getColors(Color background)
              //  Check if the color Vector already exists
              Object o = backgroundColors.get( background );
              if (o != null)
                   return (Vector)o;
              //  Doesn't exist, create fader colors for this background
              int rIncrement = ( background.getRed() - fadeTo.getRed() ) / MAX;
              int gIncrement = ( background.getGreen() - fadeTo.getGreen() ) / MAX;
              int bIncrement = ( background.getBlue() - fadeTo.getBlue() ) / MAX;
              Vector colors = new Vector( MAX + 1 );
              colors.addElement( background );
              for (int i = 1; i <= MAX; i++)
                   int rValue = background.getRed() - (i * rIncrement);
                   int gValue = background.getGreen() - (i * gIncrement);
                   int bValue = background.getBlue() - (i * bIncrement);
                   colors.addElement( new Color(rValue, gValue, bValue) );
              backgroundColors.put(background, colors);
              return colors;
         class FaderTimer implements FocusListener, ActionListener
              private Vector colors;
              private JComponent component;
              private Timer timer;
              private int alpha;
              private int increment;
              FaderTimer(Vector colors, JComponent component)
                   this.colors = colors;
                   this.component = component;
                   component.addFocusListener( this );
                   timer = new Timer(5, this);
              public void focusGained(FocusEvent e)
                   alpha = MIN;
                   increment = 1;
                   timer.start();
              public void focusLost(FocusEvent e)
                   alpha = MAX;
                   increment = -1;
                   timer.start();
              public void actionPerformed(ActionEvent e)
                   alpha += increment;
                   component.setBackground( (Color)colors.elementAt(alpha) );
                   if (alpha == MAX || alpha == MIN)
                        timer.stop();
         public static void main(String[] args)
              // Create test components
              JComponent textField1 = new JTextField(10);
              JComponent textField3 = new JTextField(10);
              JComponent textField4 = new JTextField(10);
              JComponent button = new JButton("Start");
              JComponent checkBox = new JCheckBox("Check Box");
              JFrame frame = new JFrame("Fading Background");
              frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
              frame.getContentPane().add(textField1, BorderLayout.NORTH );
              frame.getContentPane().add(button, BorderLayout.SOUTH );
              frame.getContentPane().add(textField3, BorderLayout.EAST );
              frame.getContentPane().add(textField4, BorderLayout.WEST );
              frame.getContentPane().add(checkBox);
              //  Fader preserving component background
              Fader fader = new Fader( new Color(155, 255, 155) );
              fader.add( textField1 );
              fader.add( button );
              fader.add( checkBox );
              //  Fader resetting component background
              fader = new Fader( new Color(155, 255, 155), Color.yellow );
              fader.add( textField3 );
              fader.add( textField4 );
              frame.pack();
              frame.setVisible( true );
    }

  • Turning off "Ken Burns" effect for SOME photos

    I see that someone has asked a similar question in the past and told that it's not possible to turn off the Ken Burns effect for some photos, but I'm hoping someone has a workaround or there's a hack...
    I've made a slideshow and got the idea to "tell the story" by creating some "title" images in Photoshop elements which I've placed in between a series of photos.
    These are just black backgrounds with the title (e.g. "...and the party begins", "Family reunion" etc.) in big white letters. I'm very happy with that idea
    I like the Ken Burns effect for the slideshow as it adds some semi-video "action" effect, but NOT on the titles. Having the Ken Burns effect there just looks stupid, so I would like to remove it for the titles alone.
    I know I can do it the other way round (go to "Settings" for the Slideshow, deselect "Automatic Ken Burns effect", then manually add the effect for all the photos I want), but with a slideshow album that's going to take ages to do!!
    Is there a better way?

    Perhaps you're checking the KB button on the "main" menu for the slideshow. That actually changes only the setting for the image that is currently selected. Try using the "Settings" button and deselect the "Automatic KB effect."
    John

  • How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amo

    How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0, How to get Basic salary amount in the Housing formula to calculate the housing value as I used the DBI (NICDP_EMPLOYEE_BASIC_SALARY_AMOUNT_ASG_ENTRY_VALUE) but when run the Quick pay for the housing element alone result come 0

    Hi,
    Is your formula attached to basic salary element or some other element? You need to make sure that basic salary element has some value and is processed before this formula is called. Are you able to see value for basic salary element after payroll run?
    Regards,
    Pawan

  • I have Adobe Photoshop Elements 10 plus I create PDF files for work some are scan pdf docs. When I install Photoshop Elements 10 it DOES convert all the PDF files to Photoshop Elements-10 Docs. it even changes and shows the PSE-10 Icon. So I am alway inst

    I have Adobe Photoshop Elements 10 plus I create PDF files for work some are scan pdf docs. When I install Photoshop Elements 10 it DOES convert all the PDF files to Photoshop Elements-10 Docs. it even changes and shows the PSE-10 Icon. So I am alway installing PSE-10 or uninstalling it. If I send the  PDF file that has been automatically converted to a PSE-10 the person I send the file to can not open it because they do not have PSE-10. What can I do to stop PSE-10 from converting my PDF files? Don't tell me to upgrade PSE-10 I tried their on-line program and  it is too advance for a hobby photographer like myself and their Help Desk is impossible to reach.

    Hi,
    Can you please share the logs?
    You can use the Adobe  Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
    Thanks,
    Shikha

  • How can I make a fade out effect at the end of the song in garageband for iPad?

    I want to made this effect but honestly I have no idea about what I have to do. u.u Please help.

    ClaudioWalrus wrote:
    How can I make a fade out effect at the end of the song in garageband for iPad?
    GB for iPad doesn't have volume automation, you'd need to import the project into GB on a Mac to create the fade with a volume curve.
    as an alt, finish your song and export the audio file, then import the audio file in an audio editor and create a volume fade with that:
    http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Video tutorials for After Effects CS4 (and some still relevant from CS3)

    I just added a post to my blog about some new video tutorials that we posted (and some old ones that are still relevant):
    video tutorials for After Effects CS4 (and some still relevant from CS3)

    Thanks Todd!

  • Error in Fast Formula for Supplemental Earnings Elements

    Hi,
    I have an requirement in Supplement Earning Elements for US Localization. I need to define some Supplement Earning Elements that should comes in Payroll with the extension of existing Elements.
    Here are the Steps for setups which i have done so far-
    Step 1:Created new Elements with their values with effective dates for existing user Table name
    Step 2:Done the setup for New Elements with classification as Supplemental and Category also attached the formula like "FLAT AMOUNT" formula for Calculation rule in Element Earning screen.
    Step 3: when i tried to query for the element i have created, the value in Calculation Field is "Elementname_FLAT_AMOUNT_RWSI" which is not same for the existing elements.Existing Element which is of same classification and same category the Calculation rule field is "ElementName_FLAT_AMOUNT".
    Step 4: After that i did setup for Element Description and Element Link.
    Step 5: Then i have copied the Formula from Existing element(which is previously configured and working fine for the existing elements ), made the modifications for the newly created element. When Compiling the formula ,i am getting an Error "Incorrect Data type"
    I have two queries -
    1- The setup in Earnings Screen with Calculation Rule is correct or not. As the Calculation Field for newly elements and the existing elements are different (as mentioned in Step 3).
    2- Compilation Error "Incorrect Data Types" in Fast Formula.(as mentioned in Step 5).
    I m pasting the Fast Formula code here for ready reference
    Default for TERMINATED_EMPLOYEE      is 'N'
    Default for RUN_TYPE               is 'R'
    Default for FINAL_PAY_PROCESSED      is 'N'
    default for PAYROLL_TERMINATION_TYPE is 'L'
    default for BG_TERMINATION_TYPE is 'L'
    default FOR LAST_STANDARD_PROCESS_DATE_PROCESSED IS 'N'
    DEFAULT FOR ELEMENT_NAME_NEG_EARNINGS_ASG_GRE_ITD     IS 0
    DEFAULT FOR ELEMENT_NAME_ADDITIONAL_ASG_GRE_ITD     IS 0
    DEFAULT FOR ELEMENT_NAME_REPLACEMENT_ASG_GRE_ITD     IS 0
    DEFAULT FOR ELEMENT_NAME_ASG_GRE_YTD IS 0
    DEFAULT FOR ELEMENT_NAME_ASG_GRE_RUN IS 0
    Default for PAY_EARNED_START_DATE is '02-JAN-0001' (DATE)
    Default for PAY_EARNED_END_DATE is '02-JAN-0001' (DATE)
    Default for ASG_NUMBER is ' '
    Default for ELEMENT_NAME_ASG_GRE_FYTD IS '0'
    Default for CURRENT_ELEMENT_TYPE_ID is 0
    Default for GROUP_KF_PAY_FREQUENCY is '0'
    DEFAULT FOR Amount IS 0
    INPUTS ARE Amount
    IF ELEMENT_NAME_REPLACEMENT_ASG_GRE_ITD WAS DEFAULTED OR ELEMENT_NAME_REPLACEMENT_ASG_GRE_ITD = 0 THEN
    pay_frequency = GROUP_KF_PAY_FREQUENCY
    ELEMENT_TYPE_ID_PASSED = CURRENT_ELEMENT_TYPE_ID
    annual_rate = HCS_GET_SUPPLEMENT_RATE(ELEMENT_TYPE_ID_PASSED, PAY_EARNED_END_DATE, 'General Rate')
    annual_bal = ELEMENT_NAME_ASG_GRE_FYTD
    IF annual_bal = annual_rate THEN
    Amount = 0.00
    mesg = 'Contract amount '||TO_CHAR(annual_rate)||' fully paid for '||ASG_NUMBER
    ELSE
    Amount = annual_rate / TO_NUMBER(pay_frequency)
    If abs(annual_bal+amount-annual_rate) < 1 then
    Amount = annual_rate-annual_bal
    IF ELEMENT_NAME_ASG_GRE_RUN=0 THEN
    flat_amount = Amount
    + ELEMENT_NAME_ADDITIONAL_ASG_GRE_ITD
    + ELEMENT_NAME_NEG_EARNINGS_ASG_GRE_ITD
    ELSE
    ( flat_amount = Amount )
    ELSE
    (flat_amount = ELEMENT_NAME_REPLACEMENT_ASG_GRE_ITD + ELEMENT_NAME_ADDITIONAL_ASG_GRE_ITD
    + ELEMENT_NAME_NEG_EARNINGS_ASG_GRE_ITD
    clear_repl_amt = -1 * ELEMENT_NAME_REPLACEMENT_ASG_GRE_ITD
    IF ELEMENT_NAME_ASG_GRE_RUN = 0 THEN
    IF ELEMENT_NAME_ADDITIONAL_ASG_GRE_ITD <> 0 THEN
    clear_addl_amt = -1 * ELEMENT_NAME_ADDITIONAL_ASG_GRE_ITD
    IF flat_amount < 0 THEN
    (IF (PAYROLL_TERMINATION_TYPE WAS DEFAULTED AND
    BG_TERMINATION_TYPE = 'A' AND
    TERMINATED_EMPLOYEE = 'Y' AND
    FINAL_PAY_PROCESSED = 'N') OR
    (PAYROLL_TERMINATION_TYPE = 'A' AND
    TERMINATED_EMPLOYEE = 'Y' AND
    FINAL_PAY_PROCESSED = 'N') OR
    (PAYROLL_TERMINATION_TYPE WAS DEFAULTED AND
    BG_TERMINATION_TYPE = 'L' AND
    TERMINATED_EMPLOYEE = 'Y' AND
    LAST_STANDARD_PROCESS_DATE_PROCESSED = 'N') OR
    (PAYROLL_TERMINATION_TYPE = 'L' And
    TERMINATED_EMPLOYEE = 'Y' AND
    LAST_STANDARD_PROCESS_DATE_PROCESSED = 'N') THEN
    neg_earn = -1 * ELEMENT_NAME_NEG_EARNINGS_ASG_GRE_ITD
    ELSEHuman Resource Management (HRMS)
    (neg_earn = flat_amount - ELEMENT_NAME_NEG_EARNINGS_ASG_GRE_ITD
    flat_amount = 0
    ELSE
    (IF ELEMENT_NAME_NEG_EARNINGS_ASG_GRE_ITD <> 0 THEN
    neg_earn = -1 * ELEMENT_NAME_NEG_EARNINGS_ASG_GRE_ITD
    IF (PAYROLL_TERMINATION_TYPE WAS DEFAULTED AND
    BG_TERMINATION_TYPE = 'A' AND
    TERMINATED_EMPLOYEE = 'Y' AND FINAL_PAY_PROCESSED = 'N') OR
    ( PAYROLL_TERMINATION_TYPE = 'A' AND
    TERMINATED_EMPLOYEE = 'Y' AND FINAL_PAY_PROCESSED = 'N') OR
    (PAYROLL_TERMINATION_TYPE WAS DEFAULTED AND
    BG_TERMINATION_TYPE = 'A' AND
    TERMINATED_EMPLOYEE = 'Y' AND FINAL_PAY_PROCESSED = 'Y'
    AND RUN_TYPE != 'R') OR
    ( PAYROLL_TERMINATION_TYPE = 'A' AND
    TERMINATED_EMPLOYEE = 'Y' AND FINAL_PAY_PROCESSED = 'Y' AND
    RUN_TYPE != 'R') THEN
    (STOP_ENTRY = 'Y'
    mesg = ' ELEMENT_NAME earning has been stopped for this assignment.'
    ln_calc_meth = SET_ALTRNT_FLAT_RATE_CALC_METH('NOT_APPLICABLE','NOT_APPLICABLE')
    if (1 = 1) then (
         soe_run = ELEMENT_NAME_ASG_GRE_RUN
         soe_ytd = ELEMENT_NAME_ASG_GRE_YTD
    RETURN flat_amount, clear_addl_amt, clear_repl_amt, neg_earn, STOP_ENTRY, mesg
    Can anyone help me in solving this problem. Any kind of pointers would be helpful.
    Thanks
    Pradeep.

    Hi Pradeep,
    Hope you created the new element using the 'Earnings Template' form. If it is created using the 'Earnings Template' form then the calculation rule
    should be correct. You said you are modifying the new element formula by using the existing element formula code, have you checked if the
    formula code to the old and new once have changed anything other than the element name and standard input elements reference. Try to use
    the debug messages in formula and see if that give you any clue. You should find the document in metalink how to debug a formula.
    Thanks,
    Satin

  • Text Effects for iMovie

    I am looking for some plug-in text effects for iMovie 08, I could settle for iMovie HD 6 or Final Cut Express. Specifically I am looking text bubbles or comic bubbles.
    Can anyone help me in my search?
    Thanks
    Gene

    I am looking for some plug-in text effects for iMovie 08
    iMovie '08 does not currently have a "plug-in" architecture compatible with plug-ins.
    I could settle for iMovie HD 6 or Final Cut Express.
    iMovie HD v6.0.4 is available as a free download to iLife '08 owners.
    Specifically I am looking text bubbles or comic bubbles.
    Such effects are easily created with most graphic applications and can be applied from within iMovie '08.

  • How to Search for a specific element in a MultiGraph?

    Hi there
    Im trying to implement a Multigraph ADT in Java. Multigraph is a graph that has multible edges connecting a node. I assume you all know what a Graph ADT looks like.
    So i think ive got all the basic methods functions of a normal graph/mulitgraph and now i want to search for a element in it
    The question is how will i so that?
    Do i use a breadth first search?
    But i thought a BFS traverses all the elements in a graph? And how can i use a BFS to search for a specific element in a graph?
    Thanks

    Hey there
    thanks for your reply but i still some query.
    I thought of doing that but i want to remember the nodes i revisted to get to the target (not all - but the quickest route to that node)
    My design so far is:
    have 3 Interface namely Graph, Node & Edge.
    Classes will inherit those interface to provide the actual implementation as i want the details/coding to be abstract meaning i can give many different way of implementations.
    The graph class will add nodes & edges where when adding edges, edge will store 2 nodes in it respectively source & destination nodes.
    Both Node & Edges will be stored in graph using some data structures atm (arrayList i presume)
    My Design is that i want to (my aim of the task of searching) search for a node in the multigraph by inputting (maybe 2 nodes) into method - start node target node! The method should return a list of nodes to get to the target node.+
    So so far i have this wee algorithm in mind:
    +1. Input start + target node as parameters+
    +2. Use BFS to search the graph+
    +3. When reached target node - halt+
    +4. return the list of nodes that visited to get there (but not all - only the precise & fastest)+
    So will that work?
    If so how do i go about doing implementation?
    Thanks

Maybe you are looking for