Quick Help Please!!!!... White balance 6 HD Cameras

Hey guys/gals (I only have 2 hours before I ship out)... I have an important gig tonight shooting a live event. I have 6 cameras all at different distances to the stage. The stage is reasonable and evenly lit. How should I white balance all of these cameras (Sony FX-1s and Z1Us)?
I want to use the manual White Balance in the cameras so they all have the same color temperature instead of 'auto' mode? What I realized today (which I hope I'm wrong) is that I'll have these cameras set up at different distances, they will all have to zoom in at different focal lengths (which effects the f-stops as well) to reach the White Card on the stage for the Manual White Balance. Should I White Balance the cameras this way? Will all the cameras have a slightly different White Blance due to the different Focal length?
Or should I place all of them in the same spot in front of the stage, go Wide (or tight), and then White Balance all of the cameras at the same focal length and angle?
2 cameras will have a tight shot all night, 2 cameras will be a tight to medium shot and the last 2 will be medium to wide.
Sorry if I'm overreacting (slap me if so please), it's an important gig to me and the first time I did this gig over a year ago I had to do a big of color correction depending on the shot/camera.
Thanks for your time.
-Monty
P.S. - I have a set of Warm Cards and a huge white posterboard for the White Balance and the stage is all Tungsten Lighting... basically a crapload of floodlights... theatre setting, no spotlights.

Good on ya for taking the time to learn to do this beforehand but I may have done some testing first.
TheMonty wrote:
Will all the cameras have a slightly different White Blance due to the different Focal length?
Probably not although you'll have a flare imbalance between the cameras due to the different focal lengths. No two cameras, not even the same model, will ever white balance exactly like the other, there will always be minute differences. You will also want to black balance all your cameras as well.
However, white/black balance is a small part of the imaging pie. In reality you'd really want to chart these cameras with a [DSC Labs Chrome do Monde|http://www.dsclabs.com/chromadumonde.htm] as a simple white balance will not address differences in flare/gamma balance, or inequities in the white clipper channels. When you chart a camera you null out all the variances in the r,g,b channels which creates a better white balance over all.
The color section of the Chrome du Monde helps match the color matrices of your video cameras, something else a simple white/black balance will not do.
Good luck.

Similar Messages

  • TS4212 can anyone help please..  since iCloud  came on the scene  My all in one printer  keeps saying  it is not USB connected.  I have been  looking for over a week now   and even chatted  with the USA  but cannot get it to work

    can anyone help please..  since iCloud  came on the scene  My all in one printer  keeps saying  it is not USB connected.   what do I do
    I have been  looking for over a week now   and even chatted  with the USA  but cannot get it to work.
    I am really struggling

    Thanks
    someone named  Eloisa   she gave me   a phone no.   or visit hp.com/uk
    cannot make head nor tale of it all.  I am old.  and find everything hard to undertstand

  • Displayed white balance differs from camera value (Canon .CR2 raw)

    I've noticed that Lightroom will often display a sequence or group of pictures with a very visibly different white balance between consecutive frames.
    Looking at the EXIF info in a sample Canon .CR2 raw (EOS-350D), the recorded colour temperature is 5200K (camera set for AWB), but Lightroom reports this as 4950K after import. For the next frame (continuous shot), the EXIF colour temperature is again 5200K, but Lightroom reports 4900K.
    This still happens in LR1.2 (on newly imported photos).
    Why does Lightroom appear to make its own decision for white balance rather than use the recorded value?
    Thanks,
    Barrie

    In any case, I'm worried about the discrepancy
    between Aperture and Camera Raw on something so
    basic.
    Sorry I can't help you directly with Aperture as I haven't bought it - yet. However, re-the above quote, I'd just mention that the interpretation of colour temperature values is not quite as simple as it might seem. Even more so when you bear in mind that RAW converters from 3rd parties like Adobe or Apple are not based on the RAW conversion engine produced by the camera manufacturer - in effect they have to guess/estimate what the temp/tint values in the RAW file actually mean...
    Some time back I made a series of tests using 3 Canon cameras, with ACR, Capture One & the Canon RAW converter. Each produced noticeably different results, and C1 & ACR showed quite different temp/tint values. (The Canon software only showed 'As Shot' - no values). The differences were consistent between shots from each camera (using WB values input or AWB) - but they weren't consistent from one camera to another. Which program produced the best result depended very much on the Camera/Subject/Personal taste...
    Hope someone can help with Aperture specific info, I'm sure there must be a way of making camera specific adjustments to the RAW conversions...

  • Turn off auto white balance on USB camera

    Hi,
    I'm using a USB camera to capture images of bright colored lights. I have the light configured and working in MAX and Labview 2009. My problem is that the camera is set to auto white balance in MAX and Labview, and I can't seem to change this to no white balance. When the bright lights are imaged the white wall behind the light turns the complimentary color to the light as the software attempts to 'white balance' the entire image. There doesn't seem to be an option in Labview or MAX to turn this white balance to anything other than 'auto.' I've attached the program and a couple screen shots to show the problem.
    Any help would be appreciated!
    Attachments:
    camera.vi ‏45 KB
    Camera Image.JPG ‏24 KB
    MAX settings.JPG ‏72 KB

    Hi!
    This might be late, but for the sake of reference I will answer anyway.
    You should use 2 property nodes.
    To the porpery: "CameraAttributes->ActiveAttribute"
    you should wire the string: "CameraAttributes::WhiteBalance::Mode", and to the property "ValueDBL" you should wire 1 (for manual).
    Then repeat this on a second property node but change "mode" to "value" and wire the desired value to "ValueDBL."
    For a more complete description see my post on a similar problem with autofocus (change "Focus" to "WhiteBalance" and it is the same as described above).
    http://forums.quickcamteam.net/showthread.php?tid=​891
    // Emil

  • White Balance tool and Camera Calibration Profiles

    Downloaded Lightroom v4 Beta 1 for mac but the installer package failed to launch. (com.apple.installer.pagecontroller error -1.) So I've only watched the adobe tv presentations todate.
    Anyway just wanted to give some feedback as a pro photographer about use of Lightroom and improvments I would like to see in the next version.
    I am a commercial photographer who needs colour accuracy in photographing fashion/garment images - most of my work is reproduced on a printing press for catalogues and brochures. On average a shoot will yeild about 500 images for a client, so workflow is important as they normally want them all!
    As a previous user of Capture One Pro v6 and now lightroom v3.6 - the biggest issue I have with Lightroom is the dominace of red tint when setting the white balance from a gray card reference image, shot at the same time as the images to be processed. I'm not adding anything to the images other than doing a white balance, a tweak on exposure and camera neutral setting on profiles.
    To obtain a white balance setting I use the combination of an  Xrite white balance card and the Q-Card and the old fasioned Kodak Gray cards all mounted on the same surface. I've used spot and ambient light readings on the gray cards to measure exposure and I've used the Adobe DNG Profiler and the Xrite colour checker profiler with the large colour checker card as a reference, (I've made profiles for sunny days, cloudy days, dual illuminant etc etc) and I'm viewing my images on a colour calibrated apple monitor.
    Not withstanding all of the above the best results I get out of Lightroom are using the camera profile neutral setting! Everthing else is just too red!! even though the images do look more punchy; for accuracy of actual colour I choose the camera neutral profile.
    Well when I say best results, those for colour critical garment photography and skin tones, these results are similar to those obtained from capture one pro v6.
    So for the Lightroom v4 I would like to see.
    1. White balance RGB values in numbers rather than percentages.
    2. Add and delete a colour readouts points with a dropper tool on an image to enable more acurate colour balancing particularly in shadow areas - (already available on capture one pro and adobe photoshop)
    3. Curves adjustments in all RGB channels (think you've done this)
    4. Output to CMYK profiles.
    5. Individual levels channel adjustment for RGB
    6. Ability re-organize my tools palette (add and remove) is per Capture One and Photoshop
    Regards

    The legacy ACR X.x profiles are no more produced nor included for newer cameras (AFAIK, since ACR 5.1/LR 2.1). The Adobe Standard is the new default starting point for these.
    While I am at it....are the Canon camera profiles I downloaded for the 1Ds MKII the same as for the 5D MKII or do I have to download different one...I suspect they are the same or Lightroom wouldn't offer them to me...is that correct?
    The profiles are different for each camera model, even if they share the same name in the Calibration panel. If you can see them when developing 5DII files, it means the camera-specific profiles are installed for your particular camera model (otherwise, you wouldn't see them).

  • White balance information from camera lost?

    I don't know what's up with Lightroom and reading the white balance data stored in the .nef files from my camera. Quite frankly it seems that Lightroom eighter has some "interpretation" of Nikon's colors, or that it simply disregard all white balance info.
    Is this problem .nef (Nikon)-specific, or does this whitebalance/color-interpretation problem appear with all raw formats?
    //Svein

    I calibrate against a CBL. As for "how far off", that depends on what calibration I've gotten, but it seems that Lightroom has a predefined "as shot" that is nowhere near the calibration done in-cam. I have verified this against what NX and Bibble gets, and for direct 60degree-north sunlight, Lightroom's interpretation is visibly blue-ish.
    //Svein

  • Issues with White Balance and other camera setting...

    I have found a glitch with the camera on the Lumia 800: When you try to change a different white balance setting- (try it with incandescent so you can see the difference) as well as changing the scene (ie to portrait mode) it will flip back to auto white balance, although it will say that it is still incandescent.  If you change the scene first and then the white balance and save those settings, it will take one picture like that and then revert back to auto white balance again for the next shot, but again it will tell you that it is still incandescent. (You can clearly see the white balance difference between the 2 shots, even though the camera settings say they should be the same). The whole point of saving settings is so that you can take multple shots with the same settings.  I have spent hours on the phone to Nokia trying to explain this to them and they have assured me that it will be fixed in the next update.  I took the phone back to the Orange shop and we tried 3 different handsets and they all had the same problem.
    I also have the same problem with video autofocus that  lots of people have mentioned.  Has anyone found a solution yet?  The main reason I got this phone (only last week) was for the camera so I am diappointed.  I am a photographer so I am really fussy about cameras!  They have said in the Orange shop that I can change the Lumia for another phone, such as a Galaxy S2, which is also an awesome phone.  The thing is, I really love the Lumia otherwise.  I really like the fact that I don't have an iPhone anymore, for a start!!
     Does anyone think the network you are on makes a difference? It's just that several people have suggested that there could be a conflict with the Orange software and the Nokia/Windows software.  Does anyone else have this problem who is not with Orange?

    Thanks for all of your valuable suggestions.
    The problem was compounded when there were drastic shifts in the levels of ambient light also occuring at the same time.
    Happy Holidays to everyone.
    Bruce

  • Help! White balance dropper/loupe disappears!

    I was just going through a wedding to do a last run for white balance and color corrections and my white balance loupe appears and disappears in a split second!
    Previously, I was making several WB corrections to a specific image, decided I wasn't getting anywhere and wanted to see the (M)aster image. From the master image I clicked on the WB dropped tool and it flipped back to my "version" of the file and now it just disappears every time!
    Any ideas??
    Aaron Lee
    Dual 1.8GHz G5 2GB   Mac OS X (10.4.3)  

    grumbles no, I've been up for 65 days now! Why would I want to reboot? Well, okay, I'll d/l 10.4.4 and the works :-/
    Aaron

  • First iOS 4 loads completely but then there is an error! QUICK HELP PLEASE!

    I startet to download the iPod touch Software Update (iOS 4) and it loads fine until it was finished (after 1h) there came an error message that there is an network overtiming (german: "Netzwerk-Zeitüberschreitung") and so it stops immedeatly to load and it also didn't sync with my iPod. I use an Lenovo 3000 N200 Notebook, Safari 5, iTunes 9 (all updated) and Windows 7 Home Premium, Kaspersky Security Suite. I also tried to download without Firewall und restart my PC but it didn't help! PLEASE HELP ME QUICK!!!

    I think that the Server at Applewas just too busy and I tried it 4 times again and again and suddenly it works fine... I think the iOS 4 is great but sometimes the multitasking is very uncomfortable.

  • HT201209 Hey guy I need to help please set balance my app id = 0

    I need to change location my id but I can't make because I have  point
    In store please help me set my point app id to null thk
    <Subject Edited by Host>

    You will need to Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Need quick help please!! Fast!

    Here is my code... I know it's long, but it's simple. The only part I'm having trouble with is the very end. You don't really have to know what point of this to help me figure out the problem. Near the very bottom, you'll see the line "double refund = (startcancount/startendcount)*premium;". For some reason, this keeps coming out as zero, even though I run it through the debugger and every single one of the variables has a non-zero value. I cannot figure it out. I tried changing the data type to float to no avail. What is the problem!?
    package isys202p1;
    import javax.swing.JOptionPane;
    public class ISys202P1 {
         public static void main(String[] args) {
              //Initialized variables for storing the string values of the entered names, premium
              String firstname;
              String middlename;
              String lastname;
              String response = null;
              double premium = 0;
              int startyear = 0;
              int startmonth = 0;
              int startday = 0;
              int endyear = 0;
              int endmonth = 0;
              int endday = 0;
              int canyear = 0;
              int canmonth = 0;
              int canday = 0;
              int startendcount = 0;
              int startcancount = 0;
              String ssmonth = null;
              String esmonth = null;
              String csmonth = null;
              //Prompts user for first name and stores it in the string variable firstname
              firstname = JOptionPane.showInputDialog("Please enter your first name:");
              //Prompts user for middle name and stores it in the string variable middlename
              middlename = JOptionPane.showInputDialog("Please enter your middle name");
              //Prompts user for last name and stores it in the string variable lastname
              lastname = JOptionPane.showInputDialog("Please enter your last name:");
              //Prompts the user for a premium amount, without the dollar sign, and assigns to the premium variable
              response = JOptionPane.showInputDialog("Please enter your premium amount: $");
                   premium = Double.parseDouble(response);
              //Prompts the user for the starting date of the policy term (year)
              response = JOptionPane.showInputDialog("Please enter the starting date for the policy term (year)");
                   startyear = Integer.parseInt(response);
              //Prompts the user for the starting date of the policy term (month)
              response = JOptionPane.showInputDialog("Please enter the starting date for the policy term (month)");
                   startmonth = Integer.parseInt(response);
              //Prompts the user for the starting date of the policy term (day)
              response = JOptionPane.showInputDialog("Please enter the starting date for the policy term (day)");
                   startday = Integer.parseInt(response);
              //Prompts the user for the ending date of the policy term (year)     
              response = JOptionPane.showInputDialog("Please enter the ending date for the policy term (year)");
                   endyear = Integer.parseInt(response);
              //Prompts the user for the ending date of the policy term (month)
              response = JOptionPane.showInputDialog("Please enter the ending date for the policy term (month)");
                   endmonth = Integer.parseInt(response);
              //Prompts the user for the ending date of the policy term (day)          
              response = JOptionPane.showInputDialog("Please enter the ending date for the policy term (day)");
                   endday = Integer.parseInt(response);
              //Prompts the user for the effective date of the policy cancellation (year)
              response = JOptionPane.showInputDialog("Please enter the effective date for the policy cancellation (year)");
                   canyear = Integer.parseInt(response);
              //Prompts the user for the effective date of the policy cancellation (month)
              response = JOptionPane.showInputDialog("Please enter the effective date for the policy cancellation (month)");
                   canmonth = Integer.parseInt(response);
              //Prompts the user for the effective date of the policy cancellation (day)
              response = JOptionPane.showInputDialog("Please enter the effective date for the policy cancellation (day)");
                   canday = Integer.parseInt(response);
                   //if statements that account for mid-year starting dates
              if (startmonth==1)
                   startcancount=0+startday;
              if (startmonth==2)
                   startcancount=31+startday;
              if (startmonth==3)
                   startcancount=59+startday;
              if (startmonth==4)
                   startcancount=90+startday;
              if (startmonth==5)
                   startcancount=120+startday;
              if (startmonth==6)
                   startcancount=151+startday;
              if (startmonth==7)
                   startcancount=181+startday;
              if (startmonth==8)
                   startcancount=212+startday;
              if (startmonth==9)
                   startcancount=243+startday;
              if (startmonth==10)
                   startcancount=274+startday;
              if (startmonth==11)
                   startcancount=304+startday;
              if (startmonth==12)
                   startcancount=335+startday;
                   //if statements that account for mid-year ending dates
              if (canmonth==1)
                   startcancount=startcancount+canday;
              if (canmonth==2)
                   startcancount=startcancount+31+canday;
              if (canmonth==3)
                   startcancount=startcancount+59+canday;
              if (canmonth==4)
                   startcancount=startcancount+90+canday;
              if (canmonth==5)
                   startcancount=startcancount+120+canday;
              if (canmonth==6)
                   startcancount=startcancount+151+canday;
              if (canmonth==7)
                   startcancount=startcancount+181+canday;
              if (canmonth==8)
                   startcancount=startcancount+212+canday;
              if (canmonth==9)
                   startcancount=startcancount+243+canday;
              if (canmonth==10)
                   startcancount=startcancount+274+canday;
              if (canmonth==11)
                   startcancount=startcancount+304+canday;
              if (canmonth==12)
                   startcancount=startcancount+335+canday;
                   //if statements that account for mid-year starting dates
              if (startmonth==1)
                   startendcount=0+startday;
              if (startmonth==2)
                   startendcount=31+startday;
              if (startmonth==3)
                   startendcount=59+startday;
              if (startmonth==4)
                   startendcount=90+startday;
              if (startmonth==5)
                   startendcount=120+startday;
              if (startmonth==6)
                   startendcount=151+startday;
              if (startmonth==7)
                   startendcount=181+startday;
              if (startmonth==8)
                   startendcount=212+startday;
              if (startmonth==9)
                   startendcount=243+startday;
              if (startmonth==10)
                   startendcount=274+startday;
              if (startmonth==11)
                   startendcount=304+startday;
              if (startmonth==12)
                   startendcount=335+startday;
              //if statements that account for mid-year ending dates
              if (endmonth==1)
                   startendcount=startendcount+endday;
              if (endmonth==2)
                   startendcount=startendcount+31+endday;
              if (endmonth==3)
                   startendcount=startendcount+59+endday;
              if (endmonth==4)
                   startendcount=startendcount+90+endday;
              if (endmonth==5)
                   startendcount=startendcount+120+endday;
              if (endmonth==6)
                   startendcount=startendcount+151+endday;
              if (endmonth==7)
                   startendcount=startendcount+181+endday;
              if (endmonth==8)
                   startendcount=startendcount+212+endday;
              if (endmonth==9)
                   startendcount=startendcount+243+endday;
              if (endmonth==10)
                   startendcount=startendcount+274+endday;
              if (endmonth==11)
                   startendcount=startendcount+304+endday;
              if (endmonth==12)
                   startendcount=startendcount+335+endday;
              //for loop that counts the days between the beginning and end of the policy
              for (int startcount = startyear; startcount < canyear; startcount++){
                   startcancount = startcancount + 365;
                   if (((startcount%4==0) & (startcount%100!=0)) | ((startcount%400==1) & (startcount%100==0))){
                        startcancount = startcancount + 1;
              for (int startcount = startyear; startcount < endyear; startcount++){
                   startendcount = startendcount + 365;
                   if (((startcount%4==0) & (startcount%100!=0)) | ((startcount%400==1) & (startcount%100==0))){
                        startendcount = startendcount + 1;
              //[Start String Month] Assigns the number for starting month entered to its corresponding month (starting date)
              if (startmonth == 1)
                   ssmonth = "January";
              if (startmonth == 2)
                   ssmonth = "February";
              if (startmonth == 3)
                   ssmonth = "March";
              if (startmonth == 4)
                   ssmonth = "April";
              if (startmonth == 5)
                   ssmonth = "May";
              if (startmonth == 6)
                   ssmonth = "June";
              if (startmonth == 7)
                   ssmonth = "July";
              if (startmonth == 8)
                   ssmonth = "August";
              if (startmonth == 9)
                   ssmonth = "September";
              if (startmonth == 10)
                   ssmonth = "October";
              if (startmonth == 11)
                   ssmonth = "November";
              if (startmonth == 12)
                   ssmonth = "December";
              //[cancellation string month]Assigns the number for ending month entered to its corresponding
              //month (cancellation effective date)
              if (canmonth == 1)
                   csmonth = "January";
              if (canmonth == 2)
                   csmonth = "February";
              if (canmonth == 3)
                   csmonth = "March";
              if (canmonth == 4)
                   csmonth = "April";
              if (canmonth == 5)
                   csmonth = "May";
              if (canmonth == 6)
                   csmonth = "June";
              if (canmonth == 7)
                   csmonth = "July";
              if (canmonth == 8)
                   csmonth = "August";
              if (canmonth == 9)
                   csmonth = "September";
              if (canmonth == 10)
                   csmonth = "October";
              if (canmonth == 11)
                   csmonth = "November";
              if (canmonth == 12)
                   csmonth = "December";
    //Assigns the number for ending month entered to its corresponding month (ending date)
              if (endmonth == 1)
                   esmonth = "January";
              if (endmonth == 2)
                   esmonth = "February";
              if (endmonth == 3)
                   esmonth = "March";
              if (endmonth == 4)
                   esmonth = "April";
              if (endmonth == 5)
                   esmonth = "May";
              if (startmonth == 6)
                   ssmonth = "June";
              if (endmonth == 7)
                   esmonth = "July";
              if (endmonth == 8)
                   esmonth = "August";
              if (endmonth == 9)
                   esmonth = "September";
              if (endmonth == 10)
                   esmonth = "October";
              if (endmonth == 11)
                   esmonth = "November";
              if (endmonth == 12)
                   esmonth = "December";
              double refund = (startcancount/startendcount)*premium;
              //The final output consisting of the users first name, middle name, and last name.
              JOptionPane.showMessageDialog(null, "Name: " + firstname + " " + middlename + " " + lastname + "\n" +
                        "Premium: $" + premium + "\n" + "Date: " + ssmonth + " " + startday + ", " + startyear + "\n" +
                        "End Date: " + esmonth + " " + endday + ", " + endyear + "\n" + "Effective Date: " + csmonth +
                        " " + canday + ", " + canyear + "\n" + "Refund: " + refund);
    }

    DeLorean wrote:
    If I want the program to repeat itself (except for entering the names), how would I do it using a for loop? Could someone edit my code to show me?Why don't you try it yourself?
    If you have tried, but failed to get it working, then you can post back here. Be sure that when asking a question here, the chances in getting helpful answers increase dramatically when you:
    - show what you have already tried;
    - post code using code tags;
    - use a meaningful title for your question;
    - DONT try to hurry those who are able to help you with words like "fast", "asap", "urgent", etc.

  • Need Quick help PLEASE

    I just got my nano today, and im a total nood at ipods, so im just wondering how to get the slbum art, because it seems to look real cool. Ive tried getting the manuals and what not, but they wont load on my PC! Any kind of help will be great!! PLEASE HELP ! ! !

    You select the file(s) for a specific album, then choose File > Get Info, then click on the "Artwork" tab. You have two options, paste it in from the clipboard or click "Add" to select a JPEG/etc file to use.
    iTunes doesn't automatically add it. You'll have to find an image from the web, like from Amazon. There might be software for the PC which will find it. The Mac does.

  • Help please whit adobe digital edition 2.0

    i can not read a documet, because in text box say "erro de conexion"

    Try checking your firewall, and maybe your antivirus.
    If that doesn't help, try the older ADE.
    There are lots of bugs in ADE2.0.  Try replacing ADE2.0 with the older but more reliable v1.7.2.
    (You can have them both installed at once if you like.)
    Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
    http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
    The forum software is sometimes corrupting the link above.  There shouldn't be a blank in 'editio ns.html'.  The following redirects to the same page: http://tinyurl.com/diged172

  • Quick help please

    Probably a stupid question, but -
    If I restore my iPod to factory settings, will all my music in iTunes be deleted?

    No, it will remain untouched.
    (how quick was that?)

  • Help Please: White strips in printout using Illustrator CS5  Acrobat pro 9, and Adobe reader X

    Hallo,
    I have a big problem with printing PDF file using Illustrator CS5  Acrobat pro 9, and Adobe reader X , I get  a white strip in printout. if I convert the PDF file to JPEG I get normal printout. Thanks in advance
    OS: windows7 32 bit. 2 GB ram
    Printer: HP C6280

    Illustrator
    File > Save As > Adobe PDF

Maybe you are looking for

  • Drivers for Windows Vista 64-bit on Satellite L300-1AM

    When I can get drivers for Windows Vista 64-bit? Or I need to intall 32-bit drivers on my 64-bit Vista operating system? Please links ;)

  • Hotspot options for Ipad2 Wifi

    I am very confused. Before purchasing the ipad2 i did the search about the tethering trough iphone 4 (AT&T) and I read that I could use iphone as hotspot. I contacted AT&T 3 different times (chat, over the phone, at the store) and they tell me that I

  • Platform Invoke in SUN's Java

    The most of Java developer does not use (maybe cannot use) JNI. Because this API is very low and complex in use. But in some type applications developers need to call Native functions from system or other libraries. And the only decision is to write

  • [svn:fx-trunk] 10065: Comment out code causing an RTE in SWFLoader.

    Revision: 10065 Author:   [email protected] Date:     2009-09-08 13:14:26 -0700 (Tue, 08 Sep 2009) Log Message: Comment out code causing an RTE in SWFLoader. Will fix as part of per-module styles feature development. QE notes: None. Doc notes: None.

  • XI/PI Versions

    Hi, Can someone give me all the major releases( 1.X, 2.X etc ) for XI/PI ? Justifying with SAP links would help. Regards and Thank you, Jayanth