Quickfinder 5.0 "error 503" during indexing
Hi all,
I have run up SLES 10 sp1 and installed OES2 into an existing lab tree. I
have also installed Quickfinder which is the function I want from this
server.
I am looking to index a couple of clustered Netware volumes and have
created a new virtual search server, using NCP can get the index to start
generating.
After about 3 minutes of indexing where the "view" screen shows everything
going normally, Quickfinder just bails out with "Service Unavailable,
error 503". Apache is still running ok.
I have experience with Netware and EDir but am still comming up to speed
with Linux. Any ideas?
Arran
Arran,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/
Similar Messages
-
TREX - Search Failure - HTTP Server error: 503 - Queue Server down
Hello,
I've got a problem with TREX, the following tasks results in erros:
Default Search
Search Failure
Error during search occurred - com.sapportals.wcm.WcmException: HTTP server error: 503 (Errorcode 7266)
An unexpected severe error occurred during the search call. If the situation persists, inform your system administrator.
Creating Index
Error 503
- On Index Administration: indexes status are green
- On TREX Monitor: Takes long time to loa. HTTP Server and Name Server are green. There is no entry for Queue Server
- On TREX Monitor > Display Queues: Takes a long time and then no queues are displayed
- On Portal Monitor > Request Overview: Requests for TREX takes pretty long time
Starting Time: 9:16:23 AM
Starting Date: May 19, 2010
Request Name: NW:J2E:SRV:HTTP
User ID: <my user>
Outbound Data: n/a
Duration: 395671
CPU Time: 5812
Component Entries: 26
Component with Largest Net Time: EP:KM:TREX:HTTP:<host>:30205
Largest Net Time: 38867
Component with Largest Net CPU Time: EP:PRT_render:.../com.sap.km.TrexMonitor
Net CPU Time: 5674
Could you help me with procedures or guides on how to solve the problem and start the queue server?
kind regards,
RafaelBASIS team reseted TREX and it's working again
-
JSF problem - An internal error occurred during: "Updating JSP Index".
Hello Friends,
I am facing following problem in ecplise. Whenever I open JSP page or whenever I save my jsp page.
!ENTRY org.eclipse.core.jobs 4 2 2008-06-14 13:54:24.151
!MESSAGE An internal error occurred during: "Updating JSP Index".
!STACK 0
java.lang.NoClassDefFoundError: javax/servlet/jsp/tagext/TagLibraryInfo
at org.eclipse.jst.jsp.core.internal.taglib.TaglibHelperCache.createNewHelper(TaglibHelperCache.java:112)
at org.eclipse.jst.jsp.core.internal.taglib.TaglibHelperCache.getHelper(TaglibHelperCache.java:97)
at org.eclipse.jst.jsp.core.internal.taglib.TaglibHelperManager.getHelperFromCache(TaglibHelperManager.java:43)
at org.eclipse.jst.jsp.core.internal.taglib.TaglibHelperManager.getTaglibHelper(TaglibHelperManager.java:36)
at org.eclipse.jst.jsp.core.internal.java.JSPTranslator.addTaglibVariables(JSPTranslator.java:684)
at org.eclipse.jst.jsp.core.internal.java.JSPTranslator.translateXMLNode(JSPTranslator.java:997)
at org.eclipse.jst.jsp.core.internal.java.JSPTranslator.translateRegionContainer(JSPTranslator.java:843)
at org.eclipse.jst.jsp.core.internal.java.JSPTranslator.translate(JSPTranslator.java:734)
at org.eclipse.jst.jsp.core.internal.java.JSPTranslationAdapter.getJSPTranslation(JSPTranslationAdapter.java:131)
at org.eclipse.jst.jsp.core.internal.java.search.JSPSearchDocument.getJSPTranslation(JSPSearchDocument.java:112)
at org.eclipse.jst.jsp.core.internal.java.search.JSPSearchDocument.getPath(JSPSearchDocument.java:149)
at org.eclipse.jst.jsp.core.internal.java.search.JavaSearchDocumentDelegate.<init>(JavaSearchDocumentDelegate.java:30)
at org.eclipse.jst.jsp.core.internal.java.search.JSPSearchSupport.createSearchDocument(JSPSearchSupport.java:401)
at org.eclipse.jst.jsp.core.internal.java.search.JSPSearchSupport.addJspFile(JSPSearchSupport.java:295)
at org.eclipse.jst.jsp.core.internal.java.search.JSPIndexManager$ProcessFilesJob.run(JSPIndexManager.java:262)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:58)
I am using Ecplise 3.2.0
JSF 1.1
Tomcat 5.5
JSP2.0
Any solution for this?
Thanks & regards
AbhijaiAbhijai wrote:
java.lang.NoClassDefFoundError: javax/servlet/jsp/tagext/TagLibraryInfoThis exception is been thrown if the given class was available in classpath during compile time, but not during run time. The solution is obvious: make sure that the given class (or at least the JAR file with the given class) is available in the classpath during run time.
By the way, why did you think that this problem is related to JSF? -
After installing Yosemite, the Mail required an upgrade. the upgrade was completed but resulted in a message: The upgrade failed. error occurred during the upgrade, check continue to launch Mail Import Assistant.
This resulted in an instruction: Your mail index has been damaged. To repair it quit mail. Mail will repair index next time you open mail.
Following this instruction resulted in the same failure message being repeated continuously.
How do I proceed to upgrade the Mail app.?If doing as the alert directs (relaunching Mail) has no effect, see below.
The new version of Mail stores its database in a different format than the old one, so the database has to be converted before Mail can use it. Sometimes the conversion fails because the old database is corrupt. The easy way to recover is to discard the old database and start afresh. You can do that without losing any messages, provided that:
☞ All your incoming mail accounts are on an IMAP or Exchange server
☞ You store sent messages on the server
☞ You don't have any "On My Mac" mailboxes
Most well-known independent mail services such as iCloud and Gmail are based on IMAP. On the other hand, ISP-hosted mail services almost always use POP. If your ISP is one of your mail service providers (or the only one), you probably can't use this procedure. Ask for further instructions in that case.
If you know that the conditions above are satisfied, continue as follows.
Quit Mail if it's running. Back up all data.
Open the Library folder in your home folder by holding down the option key and selecting
Go ▹ Library
from the Finder menu bar. Inside it is a subfolder named "Mail." Move that folder to the Desktop. You're not moving the Mail application; you're moving a folder named "Mail."
Open the Internet Accounts pane in System Preferences and recreate your mail accounts other than iCloud with the same settings as before. To recreate an iCloud mail account, all you have to do is open the iCloud preference pane and check the box marked Mail.
Launch Mail. If all goes well, your mailboxes should be restored automatically. The messages will be downloaded from the servers, so it may take a long time if you have very large mailboxes. Some people have mailboxes in the gigabyte range, and that may be a problem if your bandwidth usage is metered.
If the mailboxes are created successfully, you can delete the folder you moved to the Desktop. You may have to recreate your Mail rules, signatures, and custom stationery. If it's very important to you not to have to do all that, ask for instructions before deleting the folder. -
Trex Index could not be created HTTP server error: 503 (Errorcode 7266)
Hi Friends,
I have installed EP6.0 SP15 on one machine and Trex 6.1 on another machine.All the services are green in the Trex monitor.And also i am able to get a reply from http://host:30205/TrexHttpServer/TREXISAPIExt.dll?CMD=PING.Connection sucessful.While creating my first index in Index Administration i get this error message.
"Index could not be created; creating index failed: HTTP server error: 503 (Errorcode 7266)."
Please tell me as to what steps i am missing and also where can i see the log message in portal.
Thanks
Sidharathhi friends,
I went through the settings of trex services on server and found out that even after installing IIS 6.0 it was showing the path of Apache that that is i think the reason that httpserver is green but it is not using the CPU resources.I will share the setting with you.
[queueserver]
executable=TREXQueueServer.exe
arguments=-port 30204
startdir=C:\usr\sap\trex_02
starttime=5000
instances=1
#hp_32:environment=_M_ARENA_OPTS=1:256,_M_SBA_OPTS=512:100:16
As the executable for queserver is there so it is using cpu resources.
[apache]
executable=httpd
arguments=-d C:\usr\sap\trex_02/Apache -R C:\usr\sap\trex_02/Apache/libexec -F
startdir=C:\usr\sap\trex_02/Apache/bin
instances=1
As there is no folder for apache in trex installation so i think it is not working.Please check the setting in Trex Administration->Configration->Choose name server and on the right botton of it is edit services.Double click it and you will see the settings as i have shown above.Please share the settings with me as i will be then able to work with trex.
Do i have to install Apache instead of IIS6.0.Please guide me.
Thanks
Sidharath -
The remote server returned an error: (503) Server Unavailable in search service
Hi
I got this error message: when applying toplogy to search service
I am applying admin component : SPINDEX Server
crawl component-0 to : same index server spindex server
in sharepoint farm has
1 applicationserver
1 index server
1 wfe server
1 db server
I prepared like this try to configure search service on index server
Microsoft.Office.Server.Search.Administration.SearchConfigWizard+SearchConfigWizardException: Topology provisioning failed due to an error.Object reference not set to an instance of an object. at Microsoft.Office.Server.Search.Administration.SearchConfigWizard.WaitForTopologyTimerJobToFinish()
at Microsoft.Office.Server.Search.Administration.SearchConfigWizard.UpdateSearchApp() at Microsoft.Office.Server.Search.Administration.SearchConfigWizard.ProvisionSearchServiceApplication() at Microsoft.Office.Server.Search.Administration.SearchConfigurationJobDefinition.ExecuteTimerJob()
in the event viewer I get this error
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (e8ab042b-f884-4957-b328-631ba8bcb4a1).
Reason: The remote server returned an error: (503) Server Unavailable.
Technical Support Details:
System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
adilHi
when i set crawl component,administration component to local computer search service working properly
but when i scale out search service application
change above components to diffrent server i get following error
Errors were encountered during the
configuration of the Search Service Application.
Microsoft.Office.Server.Search.Administration.SearchConfigWizard+SearchConfigWizardException:
Topology provisioning failed due to an error.Object reference not set to an
instance of an object. at
Microsoft.Office.Server.Search.Administration.SearchConfigWizard.WaitForTopologyTimerJobToFinish()
at
Microsoft.Office.Server.Search.Administration.SearchConfigWizard.UpdateSearchApp()
at
Microsoft.Office.Server.Search.Administration.SearchConfigWizard.ProvisionSearchServiceApplication()
at
Microsoft.Office.Server.Search.Administration.SearchConfigurationJobDefinition.ExecuteTimerJob()
3/23/2014
10:32:20 AM
and in event viewer
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (e8ab042b-f884-4957-b328-631ba8bcb4a1).
Reason: The remote server returned an error: (503) Server Unavailable.
Technical Support Details:
System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
adil -
Enterprsise search error - HTTP server error: 503 (Errorcode 7266)
HI
i am geting following error when serching docs in portal using TREX..
Search Failure
Error during search occurred - com.sapportals.wcm.WcmException: HTTP server error: 503 (Errorcode 7266)
An unexpected severe error occurred during the search call. If the situation persists, inform your system administrator.
Indexing document failed. Communication error. HTTP server error: 503 (Errorcode 7266)
Regards
BuddhikeHi,
Can you please check the information and links given in the below threads. These will give more information of checking the HTTP Server etc..
https://forums.sdn.sap.com/thread.jspa?threadID=84269
https://forums.sdn.sap.com/thread.jspa?threadID=23496
https://forums.sdn.sap.com/thread.jspa?threadID=71527
Raghavendra -
Error in creating index on text BFILE
Hi,
I have put data into a table using SQL* Loader. The BFILE exist (I've tested it with a procedure). I've no errors during text indexing but when a look into the view ctx_user_index_errors, I have the following :
DRG-11101: failed to open file \drgit3
So, my index doesn't work.
Any ideas ?ORACLE_HOME must be set. Otherwise ctxhx.exe used during indexing won4t work.
null -
I created a web app with claims based authentication ,
basiclly i follwe this blog
http://donalconlon.wordpress.com/2010/02/23/configuring-forms-base-authentication-for-sharepoint-2010-using-iis7/
but when i login it throws 503 error
Server Error in '/' Application.
The remote server returned an error: (503) Server Unavailable.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[WebException: The remote server returned an error: (503) Server Unavailable.]
System.Net.HttpWebRequest.GetResponse() +1126
System.ServiceModel.Channels.HttpChannelRequest.WaitForReply(TimeSpan timeout) +81
[ServerTooBusyException: The HTTP service located at http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc is too busy. ]
System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) +10258154
System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) +539
Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustContract.Issue(Message message) +0
Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr) +61
Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst) +36
Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo) +26062081
Microsoft.SharePoint.SPSecurityContext.SecurityTokenForLegacyLogin() +270
Microsoft.SharePoint.IdentityModel.SPWindowsClaimsAuthenticationHttpModule.GetSecurityTokenFromWindowsIdentity(WindowsIdentity windowsIdentity, HttpContext httpContext) +21
Microsoft.SharePoint.IdentityModel.SPWindowsClaimsAuthenticationHttpModule.AuthenticateRequest(Object sender, EventArgs e) +1176
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
any thoughts?
thanks in advance!
Share Knowledge and Spread Love!Hi ,
I was also facing the same issue on changing my credentials. This effects the ServiceTokenApplicationPool and other pools related to the Web applications
To resolve this follow these :
1. Open IIS Manager , under Connection section you can see the Name of your site collection(as
siteCollectionName(Username))
2. Open SiteCollection , select Application Pools. A new window with your Web application pool names would open.
3. Right click on web app, select Advance Setting... , under Process Model select Identity
4. check for Custom account , click set and enter your Credentials and click
OK
Atlast Refresh the IIS manager.
Thank you.
Under application pools Do select the ServiceTokenApplicationPool also and follow steps 3 and 4 -
Error occurred during initialization of VM Could not reserve enoughspace for code cache
I receive this error in the ZENWSimport and Removal screen:
Error occurred during initialization of VM
Could not reserve enough space for code cache
Server is a HP DL380G4, NWSBS SP5, 4 GB RAM.
I think it's Java related, because iManager also stopped working (error
503 - service unavailable)
AUTOEXEC.BAT:
@echo off
prompt $p$g
path=c:\dos
rem mscdex /d:cpqcdrom /v /m:50 /l:f
c:\dos\nlsfunc
c:\dos\mode con cp PREPARE=((437) c:\dos\EGA.cpi)
c:\dos\mode con cp Select=437
cd \NWSERVER
## commented by MemCalc server -nl -u134217728
server -nl -u134217728
I tried removing the -u switch, but the server wouldn't even boot then.
I'm out of options, can anyone help?
Arjan SchepersAlso, I reapplied Service Pack 5, didn't help. BTI.CFG looks like the
following:
;* Copyright 1982-2001 Pervasive Software Inc. All Rights Reserved
;* Pervasive Software product initialization file for NetWare
[Btrieve Communications Manager]
MaxWorkerThreads=16
MaxReceivePacketSize=1500
Supported Protocols=TCPIP
Listen IP Address=
TCP/IP Multihomed=YES
Enable AutoReconnect=NO
AutoReconnect Timeout=180
[MicroKernel]
CacheSize=2048000
Pervasive SQL 9SP2 is installed on this server for an application named
MICROS RAS/KAS. It needs 2GB memory (*shrug*, I know), hence the 4GB memory.
Arjan Schepers -
Hello,
I'm getting the following error when I use the search in the Portal:
Error occurred during search: com.sapportals.wcm.WcmException: error: communication with preprocessor failed;index=teste,location=cdphl815:30203 (Errorcode 42)
That's probably an indexing error:
Indexing document failed. Preprocessor: failed (Errorcode 6800)
But I don't know what to do to fix this.
Please... help me!!
Thanks
LuisaHi Luisa,
It might help:
Trex Administration Tool:
http://help.sap.com/saphelp_erp2004/helpdata/en/23/92bd4016c0cc38e10000000a155106/frameset.htm
General TREX Configuration :
http://help.sap.com/saphelp_erp2004/helpdata/en/c2/d81e40777cdd5fe10000000a155106/frameset.htm
Post-Installation Activities :
http://help.sap.com/saphelp_erp2004/helpdata/en/8b/1cc83edf72e16be10000000a114084/frameset.htm
Hope it helps,
Yoav -
Error occurred during the phase IMPORT_PROPER
Hi All,
We are currently installing Add-on ST-PI Rel.2008_1_620 SAPKITLRBA, and the corresponding 3 support packages SAPKITLRB1 to SAPKITLRB3, in one of the quality systems. However, an error is encountered during the installation which is as follows:
The installation was stopped, since an error occurred during the phase
IMPORT_PROPER, which the Add-On Installation Tool is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
- Error in phase: IMPORT_PROPER
- Reason for error: TP_BUFFER_INCONSISTENCY
- Return code: 0008
- Error message: Pkgs. in queue don"t exist in the tp buffer (e.g.
SAPKITLRBA)
Also, below is the SLOG of the system:
ERROR SAPKITLRBA ST6 I 0016 20110602203832 STPIUSER INUP
cpafisr5 20110602203531
STOP MAIN IMPORT ST6 I 20110602203833 INUP
cpafisr5 20110602203531
ERROR: stopping on error 16 during MAIN IMPORT
STOP imp all ST6 0016 20110602203833 INUP
cpafisr5 20110602203531
START MAIN IMPORT ST6 I 20110602203943 INUP
cpafisr5 20110602203943
START TRANSMIT BUFFER ENTR ST6 g 20110602204020 INUP
cpafist0
STOP TRANSMIT BUFFER ENTR ST6 g 0000 20110602204020 INUP
cpafist0
START COMMIT BUFFER ENTRIE ST6 g 20110602204020 INUP
cpafisk0
HALT 20110602204020
ERROR: tpsettainfo: Cofile /usr/sap/trans/cofiles/KMARK.SYN does not
exist!
ERROR: EXIT(16) -> process ID is: 10932
WARNING: TA SAPKITLRB1 not found via index, reading whole buffer
The same add-on and support packages we successfully installed in its respective developement system and in other systems as well. However, request you all to kindly assist in resolving the error.
Thanks in advance.
Regards,
Indraneel UpponiERROR: tpsettainfo: Cofile /usr/sap/trans/cofiles/KMARK.SYN does not exist!
Does this file exist on this location ? It seems buffer insoncistency from the error message.
Regards,
Subhash -
i m using oracle10g database . through jdev-embedded 0c4j , i want to run my strut application . i m having problems with data-source entry.
i give either of following 2 entries in struts-config.xml and get this error
503 Service Unavailable
Servlet error: Initializing application data source org.apache.struts.action.DATA_SOURCE
my data-source entries are
1
data-source type="org.apache.commons.dbcp.BasicDataSource"
name="jdev-connection-DBConnection1"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="scott" password="tiger"
url="jdbc:oracle:thin:@localhost:1521:ORCL"
inactivity-timeout="30"/>
ps :- i have added dbcp in my default project properties
or i use
<data-source name="jdev-connection-DBConnection1"
class="com.evermind.sql.DriverManagerDataSource"
location="jdbc/DBConnection1CoreDS"
xa-location="jdbc/xa/DBConnection1XADS"
ejb-location="jdbc/DBConnection1DS"
pooled-location="jdbc/DBConnection1PooledDS"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="scott" password="tiger"
url="jdbc:oracle:thin:@localhost:1521:ORCL"
inactivity-timeout="30"/>To get quicker help (or to get help at all), please use a more suitable forum. I think, your problem is not a general database problem, but very specific. Try
http://forums.oracle.com/forums/index.jsp?cat=13
(topic OC4J/J2EE) -
ORA-29855 - Error creating Spatial Index using a Stored Procedure
Hi
I am using Oracle 10gR2 database and I have written a stored procedure to create spatial index. But when i execute this function i get the following error message.
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-13249: Error in R-tree: [mdrcrtscrt]
ORA-13231: failed to create index table [MDRT_217C1$] during R-tree creation
ORA-13249: Stmt-Execute Failure: CREATE TABLE FGDABZ40.MDRT_217C1$ (NODE_ID NUMBER, NODE_LEVEL NUMBER, INFO BLOB) LOB (INFO) STORE AS (CACHE) NOLOGGING PCTFREE 2
ORA-29400: data cartridge error
ORA-01031: insufficient privileges
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 10
ORA-06512: at line 1
ORA-06512: at "FGDABZ40.PKG_PSSDBE_APPLICATION", line 298
ORA-06512: at line 17
The tables that i am passing are registered in metadata and I am able to create indexes directly in sql plus. But when i try to create using this stored procedure, it fails.
it should be possible to create indexes using a generic function. Has any faced a similar problem?
regards
samHi,
I am having a same error on Oracle 10gR2 database. When I execute the same statement in sqlplus, it works. But it gives this error when I call the procedure which has this create spatial index statement.
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-13249: Error in R-tree: [mdrcrtscrt]
ORA-13231: failed to create index table [MDRT_20CDA$] during R-tree creation
ORA-13249: Stmt-Execute Failure: CREATE TABLE "SDOMGR".MDRT_20CDA$ (NODE_ID NUMBER, NODE_LEVEL NUMBER, INFO BLOB) LOB (INFO) STORE AS (CACHE) NOLOGGING PCTFREE 2
ORA-29400: data cartridge error
ORA-01031: i
Any help will be appreciated.
Thanks,
Sri -
Error creating spatial indexes
I'm using oracle 10g2.
I retrieve the following error message during spatial index creation:
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-13236: internal error in R-tree processing: [failed to cluster in memory]
ORA-13232: failed to allocate memory during R-tree creation
ORA-13236: internal error in R-tree processing: [failed to allocate memory
4387752 (mdrtsalloc)]
ORA-04031: unable to allocate ORA-04031: unable to allocate 4387800 bytes of
shared memory ("large pool","unknown object","koh-kghu sessi","kpmalloc")
bytes of shared memory ("","","","")
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 10
I've already tried to increase memory, shared and large pool, actually I have the following settings:
Shared pool 500
Buffer cache 200
Large pool 200
Pool Java 20
I've already installed data and created spatial indexes on other machine correctly with the same data with less memory use, and I can't find any difference.
Could anybody help me?Andre,
I didn't think the , and ; in the sdo_geom_metadata would be causing the problem because he indicated that he could build indexes on other data - I assume he uses the same diminfo values for these as well. But, one can never be too sure!
But certainly, follow what the error messages indicate.
The Oracle Error message manual says:
"ORA-13232: failed to allocate memory during R-tree creation
Cause: This feature assumes a minimum of 64K memory for bulk creation.
Action: Create the index for a small subset of the data. Then, use transactional insert operations for the rest of the data."
The spatial manual says:
"Before you create a spatial index, be sure that the rollback segment size and the SORT_AREA_SIZE parameter value are adequate, as described in Section 4.1.1."
One way to change the sort area size is to alter your existing session before
executing the create index statement. So, from 4.1.1. this can be done via:
ALTER SESSION SET SORT_AREA_SIZE = 20000000;
Also, do what Andre suggests. On my laptop with 1G of memory as a matter of course I change the SGA from the default to being much larger.
regards
S
Maybe you are looking for
-
I should say, when I pause while someone else talks for a couple of minutes.
-
The MacBook pro, enough to edit AVCHD
Ok, I am in the market to upgrade to a new Mac. The Mac I have now is a desktop, and it's not very powerful. I would get a desktop but I edit at friends houses a lot. So will the new 13" be enough with 2.7GHz dual-core Intel Core i7 processor with 4M
-
Out of Memory Error in Discoverer Plus
Has anyone run into and found a solution for 'OutofMemory error occured'? The java console shows - java.lang.OutOfMemoryError <<no stack trace available>> I've done some searching on Metalink and have opened an SR which pointed us to a general w
-
Can we generate code for Oracle 10g Release2
hi, We have ODM Java Code Generator for model build using Oracle 10g Release1. Do we have ODM Code genrator for model build on Oracle10g Release2 using Oracle Data Miner 10.2. What version of JDeveloper will be required.
-
Plugins for videos to be sent to mobile phones
can anybody help me with this?? I need to know how I can make a video on FCP and send it to mobile phones?? What specifications should I have in order to be able to send it to mobile phones and view it clearly?? iMAC Mac OS X (10.4.9) iMAC Mac