Quta balance as on date

Hi Experts,
I am writing a PCR to retrieve quota balance as on last day of the year (For example 31.12.2010). I have used HRS=FR01C
where 01 is leave quota type for PL.When time evaluation runs for 31.12.2010, it gives me PL balance as on that date but the problem here is if an employee has taken leave from say 28.12.2010 to 10.01.2011 and suppose the employee has 30 days of quota in his account then quota balance as on 31.12.2010 is retrieved as 27 days (Only three days from 28.12.2010 to 31.12.2010 subtracted from 30 days of quota). However I want it to be 17 days (30 days minus 13 days (28 Dec to 10 Jan comes to 13 days of leave). Please let me know if this is possible through any standard config.
Note:
I have Ticked the checkbox named "Deduction over interval end" in view T554S.

Dear Anurag,
There are two scenarios, if you want to put quota deduction and validity period is unlimited , then quota will carry fwd automatically for the next year, mention 999 months in validity end date, if not,
you want to maintain the quota ded. period only for the calendar year you need to write PCR qureing on 12th months 31st day or 1st month of 1st day.
then the previous month quota will be carry fwd to the present month.
cheers

Similar Messages

Opening and closing balance between 2 dates

hi.
i am facing a problem while fetching the opening and closing balance for a particular G/L account.
In my program i am entering G/L account for a date range i.e, between two dates and i want opening and closing balance for these 2 date ranges.
So, please tell me is there any function module to fetch opening and closing balance between two dates.
Regards,
ROHINI.K.

Hi Rohini,
             Check this FM :   BAPI_GL_GETGLACCPERIODBALANCES.
If we use this functional module, we will get opening and closing balance of corresponding G/L Acc.
(e.g)
CALL FUNCTION 'BAPI_GL_GETGLACCPERIODBALANCES'
    EXPORTING
      companycode                   = '1000'
      glacct                              = '0000548101'
      fiscalyear                         = '2007'
     currencytype                      = '10'
   IMPORTING
BALANCE_CARRIED_FORWARD       = gs_bal-balance
     RETURN                                        = v_return
    TABLES
      account_balances                            = gt_bal.

I want to find out opening balance as on date in fi(for customer)

hi
experts,
my req is user enter date through selection screen like (07.04.09)
i want to find opening balance.
thanks
ajay.

Dear Ajay,
Try for Bapi for opening balance on perticular date. This will definately solve your problem
I have come across this problem long back.
Try this. I will give you name of Bapi sortly.
Regards,
Vijay

Requirement of General Ledger Trial Balance Detail Report Date wise

Thanks for your reply
We have to requirement of General Ledger Trial Balance Detail Report Date wise.
Please help for that.
Thanks.

Take sum(Accounted_dr) - Sum(Accounted_Cr) till the Accounting Date..... from GL_BALANCES
Edited by: 924750 on Sep 16, 2012 3:42 AM

Can seeded Elements and Balance have different Date Track

hi,
The Elements created in our instance is date tracked to 01-JAN-1900 and the seeded balance date tracked to 01-APR-2005. Can seeded Elements and Balances have different date track both being seeded. Example Element is "PF INFORMATION" and Balance Named by "Leave Encashment"
How to resolve this problem when I am trying to add seeded Balance which is date tracked to 01-APR-2005 to Element date Tracked to "01-JAN-1900". I am not able to find the Balance in that Element as balance is date tracked later than Element.
If I want to add custom Element which is date tracked to 01-JUN-2002 and Seeded Balance which is date tracked to 01-JUN-1950. Since in this case i am not able to see the Custom Element in the Balance screen.
Thanks
Ram

you are not allowed to add feeds to a seeded balance type.
Can the dates be different? Sure. Look to your own dates.
By the way, why bothering about dates in 2005 and 1900, if you want to run a payroll now?

Balance before posting date

Hi gurus,
I just want to find the balance of the amount less than the posting from date
For eg if posting date is 1st march 2011 then i want the balance amount of date upto 28th feb 2011.
Kindly help in giving some help yar.

Hi Don,
I am using CR 2008.
cuming to my report It is a field required in page header i will give u layout also below k
and only one group is ther that to on by cerrency.
Some formulas regarding Amount field And Others.Here i my report layout looks like
Our doc reference   Posting date     Trasaction Currency Invoice amount
Blance carried as on (?Posting Fromdate)      (Amount)
123                              1st March             RV          INR             100000
256                               2nd MArch           DR          INR              20000
124                                 xxxxxx               DZ          INR              30000
365                                 xxxxxx               DG          INR              121254
Here invoice amount from formula field.
i think this can give you some clarity. Please help me Don.

Account balance out of date

Has anyone else had account balance out of date error before! I lost almost 7 dollars off of a new Itunes gift card after redemption!

Mine is doing the same thing, half an hour ago I redeemed 30$ in iTunes gift cards and now I'm trying to buy music and it keeps saying, credit balance out of date

TS1292 My card will not go through. It has balance out of date

I am getting an error on my card balance. It says balance out of date. I am not able to purchase any songs. I just purchased them tonight

I had the same problem and resolved it by updating my account:
1) Log into your account by clicking on your user name in iTunes (next to the song balance)
2) Once logged in, Click on the "Reset Warnings Button" near the bottom of the page
This should clear the song balanace and allow you to purchase additional songs.

How to get Inventory Balances for PO data

Hi Guys,
How to get Inventory Balances for PO data.
from which tables I can get it ?
We are migrating material data to a new plant.. for this process.. The inventory data also has to be moved..
I am using BAPI_GOODMVT_CREATE to post inventory balances for the new plant.
Thanks

Hi,
Try MARC, MSKA, MARD .
Thanks,
Krishna

How to upload claim and balance as on date at the time of go live

Experts,
Where i have to update the claimed value and the balance eligibility at the time go live
I have seen one report while searching thorough the Forum i found this PC00_M40_UPCF, i tried to upload claimed value as well the carry forward amount and it is updating in V_T7INAE table. But this to carry forward for the next financial period right ?
My query is what are the things i have to do to update the claimed amount and unclaimed balance at the time of go live .

Sujith,
Table V_T7INAE take care of all these things... you can try to test few cases after uploading... as it will hold the carry forward amount alongwith paid amount as well.. so in sort almost all the information. Only thing it doesn't have is claimed amount for current period before payroll run as it will stored in infotype 15 or 267. For go-live data upload, i feel you don't need that data. Hence it will work for your case.

How to get a gl balance for a date

Hi,
I am trying to develop a reprt for a gl transaction from user entered date. The problem i am facing is fi table contains data for a period. So whenevri try to fetch opening balance it comes from start of the month not from any date into the maonth say 10th.
Please provide me code to capture the balance of gl in any day of the month.
CHEERS

Hi,
Thanks for your reply
the table you have given contains the data with document numbers. To calculate the current date balance i have to consider all the documents till date.
For fbl3n please guide me how can i catch the closing balance in report for a particular date. Because when i am running the tcode it is shownig the balance in structure from whic i am not able to get the balance.

Guest N+1 redundancy & load balancing in seperate data centers

I need assistance in aquiring documentation to setup N+1 redundancy & load balancing between two seperate guest anchor controllers installed in seperate data centers. Can you explaing how it should be setup or point me in the right direction for documentation? If you can't point me in the right direction to aquire documentation; can you answer the following questions?
1) How do I setup my mobility groups on my guest anchor controllers installed in the DMZ? Should both guest anchor's be in the same mobility group.
2) Do both guest anchors share the same virtual IP or do they need to be seperate (DMZ01 - 1.1.1.1 / DMZ02 - 2.2.2.2)? I think seperate!
3) Are there any configuration parameters on the guest anchors for load balancing?
4) Do either on of the guest anchors need to be setup as a master controller? I'm not sure?
5) Are there any configuration parameters on the foreign controllers for load balancing?
6) How do I setup my foreign controllers? Should both guest controllers be added to the mobility group on the foreigh controller? I would think both of them would be added to the foreign controller mobility group.
7) Should both guest anchors be added as an anchor on the WLAN? I would think both controllers would need to be added as anchors under the WLAN!
8) Am I missing anything here? This is how I think it should logically work?
Thanks,
Gordon

I need to elaborate on my questions:
1) Do both of my guest DMZ anchors need to be in a seperate mobility group on their own or can the guest anchors be in completely seperate mobility groups? All 100 + foreign controllers are in seperate mobility groups.
I) Example #1: Guest anchor number 1 (Mobility group: DMZ) / Guest anchor number 2 (Mobility group: DMZ)
II) Example #2: Guest anchor number 1 (Mobility group: DMZ01) / Guest anchor number 2 (Mobility group: DMZ02)
2) Do both guest anchor controllers have to be configured with seperate virtual IP's or do they share the same address?
I) Follow up to this question: I want to register the DMZ controllers with our DNS servers so that my clients receive a name when authenticating through my customized webauth. I am currently using 1.1.1.1 as the virtual address and I'm pretty sure this is the address I need to register with my external DNS server. My question is this. Does the address I use for the virtual interface matter? 1.1.1.1 is not a valid address with my network. Do I need to assign a valid address registered with my network if I'm going to add this address to my external DNS servers?
3) No change to my original question.
4) No change to my original question.
5) No change to my original question. I have run into Cisco documentation that mentions guest anchor load balancing, but the documentation is very vague. I'd love to be able to load balance as the network group wants to limit my guest traffic to the internet. I could double my pipe if I could load balance the guest anchors.
6) No change to my original question, but the answer to question one is key to the setup of my foreign controllers.
7) Elaboration: Should both guest controllers be added as an anchor under the WLAN on the foreign controllers? I would think both of them would be added.
8) No change:
9) Should my secondary guest controller be added as an anchor on the WLAN of the primary guest DMZ controller and visa versa?
Can my Cisco expert answer this or do I need to open a TAC case?
Thanks,
Gordon Shelhon
SR. Wireless Services Engineer
Company: Not specified

GL Trial Balance has no data using Parent Value

I have setup a company parent value with two children values. I went to run the stamdard trial balance 1 summary report for the parent value and the report shows no data. Are only fsg's able to print parent value reports? Thanks fin advance.

suggest to create customize TB report.

Server Load-balancing Across Two Data centers on Layer 3

Hi,
I have a customer who would like to load balance two Microsoft Exchange 2010 CAS Servers which are residing across two data centers.
Which is the best solution for this? Cisco ACE or Cisco ACE GSS or both?

I would go with source natting the clients ip addresses, so that return traffic from the servers is routed correctly.
It saves you the trouble with maintaining PBR as well.
Source NAT can be done on the ACE, by applying the configuration to either the load balancing policy, or adding the configuration to the class-map entries in the multi-match policy.
Cheers,
Søren
Sent from Cisco Technical Support iPad App

Custom white balance and EXIF data

Using 3.1.1 for two weeks or so, all is good for now but I have a question. After shooting the same subject with different white balance (still learning digital photography) with my D7000, a few with auto WB, a few with the camera's incandescent settings and a few with customized K degrees, 4,500K, 5,000K and 6,200K to analyze the differences, on the exif data, Aperture only shows AWB and the "incandescent" setting on the camera whenever used, but it doesn't show me when I set the degrees by numbers on the camera, it shows as "auto white balance", is this part of the white balance glitch? Although I can see the difference between those custom K degrees on preview, how do I find out in Aperture the exact K used on those custom WB other than looking back on the camera?

Thanks for replying.
No, not in Auto mode. I was in Aperature mode.
I have used custom white balance many times before.
I tried the battery removal etc. No luck there.
Removed and reinserted card. No help.
I finally got out of this hangup.
I downloaded all images to PC using the Canon EOS software.
Then I deleted all images from card in camera.
Then when I set up custom white balance again, it worked just as expected.
There was a very brief flash of the "Busy..." message and then into the next step to set .
Have no clue as why this suddenly started.
Maybe struck by stray gamma ray burst
Canon 3Ti, EF 50mm f/1.4 USM, EF-S 18-55mm f/3.5-5.6 IS II, EF-S 55-250mm f/4-5.6 IS II, 320EX Speedlite

Quta balance as on date

Similar Messages

Maybe you are looking for